The issue with this check is that it results in userspace receiving an
-EIO while the gpu reset hasn't completed, resulting in fallback to sw
rendering or worse.

Now there's also a stern comment in intel_ring_wait_seqno saying that
intel_ring_begin should not return -EAGAIN, ever, because some callers
can't handle that. But after an audit of the callsites I don't see any
issues. I guess the last problematic spot disappeared with the removal
of the pipelined fencing code.

So do the right thing and call check_wedge, which should properly
decide whether an -EAGAIN or -EIO is appropriate if wedged is set.

Note that the early check for a wedged gpu before touching the ring is
rather important (and it took me quite some time of acting like the
densest doofus to figure that out): If we don't do that and the gpu
died for good, not having been resurrect by the reset code, userspace
can merrily fill up the entire ring until it notices that something is
amiss.

Allowing userspace to emit more render, despite that we know that it
will fail can't lead to anything good (and by experience can lead to
all sorts of havoc, including angering the OOM gods and hard-hanging
the hw for good).

v2: Fix EAGAIN mispell, noticed by Chris Wilson.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... instead of looping endless with no hope of ever serving that
page-fault. We only need to break out of this loop when the gpu died,
to run the reset work (and hopefully resurrect it).

To clarify questions Chris raised on irc: This is about handling I/O
errors not from our own code, but e.g. when the disk died when trying
to swap in a gem bo. So this patch remidies the issue that the current
handling only handles gpu-death-induced cases of -EIO. Admittedly,
dying disks are much rarer than hanging gpus ...To clarify questions
Chris raised on irc: This is about handling I/O errors not from our
own code, but e.g. when the disk died when trying to swap in a gem bo.
So this patch remidies the issue that the current handling only
handles gpu-death-induced cases of -EIO. Admittedly, dying disks are
much rarer than hanging gpus ...

This seems to have been lost in:

commit d9bc7e9f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Feb 7 13:09:31 2011 +0000

    drm/i915: Fix infinite loop regression from 21dd3734Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the gpu reset no longer using a trylock we've increased the
chances of userspace getting stuck quite a bit. To make that
(hopefully) rare case more paletable time out when waiting for the gpu
reset code to complete and signal this little issue to the caller by
returning -EIO.

This should help userspace to somewhat gracefully fall back and
hopefully allow the user to grab some logs and reboot the machine
(instead of staring at a frozen X screen in agony).

Suggested by Chris Wilson because I've been stubborn about allowing
the gpu reset code no to fail, ever (by removing the trylock).
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So don't return -EAGAIN, even in the case of a gpu hang. Remap it to
-EIO instead. Note that this isn't really an issue with
interruptability, but more that we have quite a few codepaths (mostly
around kms stuff) that simply can't handle any errors and hence not
even -EAGAIN. Instead of adding proper failure paths so that we could
restart these ioctls we've opted for the cheap way out of sleeping
non-interruptibly.  Which works everywhere but when the gpu dies,
which this patch fixes.

So essentially interruptible == false means 'wait for the gpu or die
trying'.'

This patch is a bit ugly because intel_ring_begin is all non-interruptible
and hence only returns -EIO. But as the comment in there says,
auditing all the callsites would be a pain.

To avoid duplicating code, reuse i915_gem_check_wedge in __wait_seqno
and intel_wait_ring_buffer. Also use the opportunity to clarify the
different cases in i915_gem_check_wedge a bit with comments.

v2: Don't access dev_priv->mm.interruptible from check_wedge - we
might not hold dev->struct_mutex, making this racy. Instead pass
interruptible in as a parameter. I've noticed this because I've hit a
BUG_ON(!mutex_is_locked) at the top of check_wedge. This has been
added in

commit b4aca010
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Apr 25 20:50:12 2012 -0700

    drm/i915: extract some common olr+wedge code

although that commit is missing any justification for this. I guess
it's just copy&paste, because the same commit add the same BUG_ON
check to check_olr, where it indeed makes sense.

But in check_wedge everything we access is protected by other means,
so this is superflous. And because it now gets in the way (we add a
new caller in __wait_seqno, which can be called without
dev->struct_mutext) let's just remove it.

v3: Group all the i915_gem_check_wedge refactoring into this patch, so
that this patch here is all about not returning -EAGAIN to callsites
that can't handle syscall restarting.

v4: Add clarification what interuptible == fales means in our code,
requested by Ben Widawsky.

v5: Fix EAGAIN mispell noticed by Chris Wilson.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Simply failing to reset the gpu because someone else might still hold
the mutex isn't a great idea - I see reliable silent reset failures.
And gpu reset simply needs to be reliable and Just Work.

"But ... the deadlocks!"

We already kick all processes waiting for the gpu before launching the
reset work item. New waiters need to check the wedging state anyway
and then bail out. If we have places that can deadlock, we simply need
to fix them.

"But ... testing!"

We have the gpu hangman, and if the current gpu load gem_exec_nop
isn't good enough to hit a specific case, we can add a new one.

"But ...  don't we return -EAGAIN for non-interruptible calls to
wait_seqno now?"

Yep, but this problem already exists in the current code. A follow up
patch will remedy this by returning -EIO for non-interruptible sleeps
if the gpu died and the low-level wait bails out with -EAGAIN.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Only bits 30:28, bit 31 is PIPE_DDI_FUNC_ENABLE.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This pollutes dmesg output even if we do not have FBC for the device, so
move the DRM_DEBUG_KMS statement lower.

v2: just kill the message as suggested by Daniel.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is necessary for the modesetting to work correctly after a
suspend-resume cycle. Without this, the pipes and clocks got the correct
configuration, but the underlying DDI buffers configuration was lost.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This function is used to set the PCH_DREF_CONTROL register, which does
not exist on LPT anymore.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Previously we had has_pch_split to tell us whether we had a PCH or not
and we also had dev_priv->pch_type to tell us which kind of PCH it
was, but it could only be used if we were 100% sure we did have a PCH.
Now that PCH_NONE was added to dev_priv->pch_type we don't need
has_pch_split anymore: we can just check for pch_type != PCH_NONE.

The HAS_PCH_{IBX,CPT,LPT} macros use dev_priv->pch_type, so they can
only be called after intel_detect_pch. The HAS_PCH_SPLIT macro looks
at dev_priv->info->has_pch_split, which is available earlier.

Since the goal is to implement HAS_PCH_SPLIT using dev_priv->pch_type
instead of dev_priv->info->has_pch_split, we need to make sure that
intel_detect_pch is called before any calls to HAS_PCH_SPLIT are made.
So we moved the intel_detect_pch call to an earlier stage.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And rely on the fact that it's 0 to assume that machines without a PCH
will have PCH_NONE as dev_priv->pch_type.

Just today I finally realized that HAS_PCH_IBX is true for machines
without a PCH. IMHO this is totally counter-intuitive and I don't
think it's a good idea to assume that we're going to check for
HAS_PCH_IBX only after we check for HAS_PCH_SPLIT.

I believe that in the future we'll have more PCH types and checks
like:

    if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))

will become more and more common. There's a good chance that we may
break non-PCH machines by adding these checks in code that runs on all
machines. I also believe that the HAS_PCH_SPLIT check will become less
common as we add more and more different PCH types. We'll probably
start replacing checks like:

    if (HAS_PCH_SPLIT(dev))
        foo();
    else
        bar();

with:

    if (HAS_PCH_NEW(dev))
        baz();
    else if (HAS_PCH_OLD(dev) || HAS_PCH_IBX(dev))
        foo();
    else
        bar();

and this may break gen 2/3/4.

As far as we have investigated, this patch will affect the behavior of
intel_hdmi_dpms and intel_dp_link_down on gen 4. In both functions the
code inside the HAS_PCH_IBX check is for IBX-specific workarounds, so
we should be safe. If we start bisecting gen 2/3/4 bugs to this commit
we should consider replacing the HAS_PCH_IBX checks with something
else.

V2: Improve commit message, list possible side effects and solution.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

High frequency link configurations have the potential to cause trouble
with long and/or cheap cables, so prefer slow and wide configurations
instead.  This patch has the potential to cause trouble for eDP
configurations that lie about available lanes, so if we run into that we
can make it conditional on eDP.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45801
Tested-by: peter@colberg.org
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

While creating the new enable/disable_gt_powersave functions in

commit 8090c6b9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jun 24 16:42:32 2012 +0200

    drm/i915: wrap up gt powersave enabling functions

I've botched up the handling of ironlake_disable_rc6. Fix this up by
calling it at the right place. Note though that ironlake_disable_rc6
does a bit more than just disabling rc6 - it also tears down all the
allocated context objects.

Hence we need to move intel_teardown_rc6 out and directly call it from
intel_modeset_cleanup.

Also properly mark ironlake_enable_rc6 as static and kill the un-used
declaration in i915_drv.h.

Note: In review a question popped out why disable_rc6 also tears down
the backing object and why we should move that out - it's simply for
consistency with gen6+ rps code, which does it that way.

Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This commit moves force wake support routines into intel_pm modules, and
exports the gen6_gt_check_fifodbg routine (used in I915_READ).
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For Haswell, on some of the early hardware revisions, it is possible to
run into issues when RC6 state is enabled and when pipes change state.

v2: add comment saying that this is for early revisions only.

v3: beautify as suggested by Daniel Vetter.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is based on Ivy Bridge clock gating for now, but is subject to
changes in the future.

Note: Compared to the ivb clock gating this drops the the IDICOS
medium uncore sharing tuned in

commit 20848223
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Fri May 4 18:58:59 2012 -0700

    drm/i915: set IDICOS to medium uncore resources

Eugeni wants to benchmark the effect of this first.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: added note]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We weren't disabling RC6 bits when bringing down RPS.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It should be working so let's turn it on by default and catch any possible
issues faster.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just a cosmetic change to simplify the if statement.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Most of the RPS and RC6 enabling functionality is similar to what we had
on Gen6/Gen7, so we preserve most of the registers.

Note that Haswell only has RC6, so account for that as well. As suggested
by Daniel Vetter, to reduce the amount of changes in the patch, we still
write the RC6p/RC6pp thresholds, but those are ignored on Haswell.

Note: Some discussion about the nature of the new tuning constants
popped up in review - the answer is that we don't know why they've
changed, but the guide from VPG with the magic numbers simply has
different values now.

v2: Squash fix for ?: vs | operation precende bug into this patch.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Added note to commit message. Squashed fix.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There is a different ACK register for force wake on Haswell, so account
for that.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As a w/a to prevent reads sporadically returning 0, we need to wait for
the GT thread to return to TC0 before proceeding to read the registers.

v2: adapt for Haswell changes (Eugeni).

v3: use wait_for_atomic_us for thread status polling.

v3: *really* use wait_for_atomic for polling.

References: https://bugs.freedesktop.org/show_bug.cgi?id=50243Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Tidy up the routines for interacting with the GT (in particular the
forcewake dance) which are scattered throughout the code in a single
structure.

v2: use wait_for_atomic for polling.

v3: *really* use wait_for_atomic for polling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Daniel complained about this on initial review, but he graciously moved
the patches forward. As promised, I am delivering the desired cleanup
now.

Hopefully I didn't screw the trivial patch up ;-)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Looks like a copy/paste error.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The prep to remove the flushing list in

commit cc889e0f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jun 13 20:45:19 2012 +0200

    drm/i915: disable flushing_list/gpu_write_list

causes quite some decent regressions. We can fix this by setting the
CS_STALL bit to ensure that the following seqno write happens only
after the cache flush has completed. But only do that when the caller
actually wants the flush (and not also when we invalidate caches
before starting the next batch).

I've looked through all our ancient scrolls about gen6+ pipe control
workarounds, and this seems to be indeed a legal combination: We're
allowed to set the CS_STALL bit when we flush the render cache (which
we do).

While yelling at this code, also pass back the return value from
intel_emit_post_sync_nonzero_flush properly.

v2: Instead of emitting more pipe controls, set the CS_STALL bit on
the write flush as suggested by Chris Wilson. It seems to work, too.

Cc: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51436
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51429Tested-by: NLu Hua <huax.lu@intel.com>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we ever hit the default case in the switch statement we'll return
from the function without freeing the memory we just allocated to
'intel_plane' (but that has not been used).

This patch gets rid of the leak by freeing the memory just before we
return.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We shouldn't hit this path anyway, but make it use the IVB sprite format
definition to avoid confusion.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Or going from tiled to untiled may break.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm/i915 now takes care itself of setting up the gtt for
these chips.
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is the quick&dirty way Dave Airlie suggested to workaround the
midlayer drm agp brain-damange. Note that i915_probe is only called
when the driver has ksm enabled, so no need to check for that.

We also need to move the intel_agp_enabled check at the right place.
Note that the only thing this does is enforce the correct module load
order (by using a symbol from intel-agp.ko) to ensure that the fake
agp driver is ready before the drm core tries to set up the agp stuff.

v2: Add a comment to explain why gen3 needs all this legacy fake agp
stuff - we've shipped an XvMC library with a kms-enabled ddx that
requires it (but only on gen3).

v3: Make it clear that this is only a gen3 issue in the comment.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This single leftover use is due to a patch that went into 3.5 through
-fixes. With the fake agp stuff on demise, at least for gen6+ we can't
use this any more.
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The enable functions grabbed dev->struct_mutex themselves, whereas
the disable functions expected dev->struct_mutex to be held by the
caller. Move the locking out to the (currently only) callsite of
intel_enable_gt_powersave to make this more consistent.

Originally this was prep work for future patches, but I've chased down
a totally wrong alley. Still, I think this is a sensible
clarification.
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... instead of calling each one for each generation indiviudally.

Notice that we've already managed to be inconsistent, the resume path
is missing an IS_VLV check. As a nice benefit we can mark all the
platform specific enable/disable functions as static and hide them in
intel_pm.c
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I want to merge the "no more fake agp on gen6+" patches into
drm-intel-next (well, the last pieces). But a patch in 3.5-rc4 also
adds a new use of dev->agp. Hence the backmarge to sort this out, for
otherwise drm-intel-next merged into Linus' tree would conflict in the
relevant code, things would compile but nicely OOPS at driver load :(

Conflicts in this merge are just simple cases of "both branches
changed/added lines at the same place". The only tricky part is to
keep the order correct wrt the unwind code in case of errors in
intel_ringbuffer.c (and the MI_DISPLAY_FLIP #defines in i915_reg.h
together, obviously).

Conflicts:
	drivers/gpu/drm/i915/i915_reg.h
	drivers/gpu/drm/i915/intel_ringbuffer.c
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Coult -> Could
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull KVM fixes from Avi Kivity:
 "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which
  allowed pci bridges to be assigned to guests."

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page
  KVM: Fix PCI header check on device assignment

Pull InfiniBand/RDMA fixes from Roland Dreier:
 - Fixes to new ocrdma driver
 - Typo in test in CMA

* tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cma: QP type check on received REQs should be AND not OR
  RDMA/ocrdma: Fix off by one in ocrdma_query_gid()
  RDMA/ocrdma: Fixed RQ error CQE polling
  RDMA/ocrdma: Correct queue SGE calculation
  RDMA/ocrdma: Correct reported max queue sizes
  RDMA/ocrdma: Fixed GID table for vlan and events

Pull ARM SoC fixes from Olof Johansson:
 "Nothing very controversial in here.  Most of the fixes are for OMAP
  this time around, with some orion/kirkwood and a tegra patch mixed in."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Orion: Fix Virtual/Physical mixup with watchdog
  ARM: Kirkwood: clk_register_gate_fn: add fn assignment
  ARM: Orion5x - Restore parts of io.h, with rework
  ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled
  ARM: OMAP2+: mux: fix sparse warning
  ARM: OMAP2+: CM: increase the module disable timeout
  ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks
  ARM: OMAP4: hwmod data: fix 32k sync timer idle modes
  ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby
  ARM: OMAP: Fix Beagleboard DVI reset gpio
  arm/dts: OMAP2: Fix interrupt controller binding
  ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0
  ARM: OMAP2+: Fix MUSB ifdefs for platform init code
  ARM: tegra: make tegra_cpu_reset_handler_enable() __init
  ARM: OMAP: PM: Lock clocks list while generating summary
  ARM: iconnect: Remove include of removed linux/spi/orion_spi.h