The orig_cpu parameter in trace_sched_migrate_task() is not necessary,
it can be got by using task_cpu(p) in the probe.

[ Impact: micro-optimization ]
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
[ modified from Mathieu's patch. The original patch is at:
  http://marc.info/?l=linux-kernel&m=123791201716239&w=2 ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: zhaolei@cn.fujitsu.com
Cc: laijs@cn.fujitsu.com
LKML-Reference: <49FFFDB7.1050402@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A module will add/remove its trace events when it gets loaded/unloaded, so
the ftrace_events list is not "const", and concurrent access needs to be
protected.

This patch thus fixes races between loading/unloding modules and read
'available_events' or read/write 'set_event', etc.

Below shows how to reproduce the race:

 # for ((; ;)) { cat /mnt/tracing/available_events; } > /dev/null &
 # for ((; ;)) { insmod trace-events-sample.ko; rmmod sample; } &

After a while:

BUG: unable to handle kernel paging request at 0010011c
IP: [<c1080f27>] t_next+0x1b/0x2d
...
Call Trace:
 [<c10c90e6>] ? seq_read+0x217/0x30d
 [<c10c8ecf>] ? seq_read+0x0/0x30d
 [<c10b4c19>] ? vfs_read+0x8f/0x136
 [<c10b4fc3>] ? sys_read+0x40/0x65
 [<c1002a68>] ? sysenter_do_call+0x12/0x36

[ Impact: fix races when concurrent accessing ftrace_events list ]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A00F709.3080800@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When unloading a module, memory allocated by init_preds() and
trace_define_field() is not freed.

[ Impact: fix memory leak ]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A00F6E0.3040503@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Normally a config should be default to n. This patch also makes the
sample module-only, like SAMPLE_MARKERS and SAMPLE_TRACEPOINTS.

[ Impact: don't build trace event sample by default ]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A00F6C0.8090803@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The sample is useful for testing, and I'm using it. But after
loading the module, it keeps saying hi every 10 seconds, this may
be disturbing.

Also Steven said commenting out the "hi" helped in causing races. :)

[ Impact: make testing a bit easier ]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A00F6AD.2070008@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds code that can benchmark the ring buffer as well as
test it. This code can be compiled into the kernel (not recommended)
or as a module.

A separate ring buffer is used to not interfer with other users, like
ftrace. It creates a producer and a consumer (option to disable creation
of the consumer) and will run for 10 seconds, then sleep for 10 seconds
and then repeat.

While running, the producer will write 10 byte loads into the ring
buffer with just putting in the current CPU number. The reader will
continually try to read the buffer. The reader will alternate from reading
the buffer via event by event, or by full pages.

The output is a pr_info, thus it will fill up the syslogs.

  Starting ring buffer hammer
  End ring buffer hammer
  Time:     9000349 (usecs)
  Overruns: 12578640
  Read:     5358440  (by events)
  Entries:  0
  Total:    17937080
  Missed:   0
  Hit:      17937080
  Entries per millisec: 1993
  501 ns per entry
  Sleeping for 10 secs
  Starting ring buffer hammer
  End ring buffer hammer
  Time:     9936350 (usecs)
  Overruns: 0
  Read:     28146644  (by pages)
  Entries:  74
  Total:    28146718
  Missed:   0
  Hit:      28146718
  Entries per millisec: 2832
  353 ns per entry
  Sleeping for 10 secs

Time:      is the time the test ran
Overruns:  the number of events that were overwritten and not read
Read:      the number of events read (either by pages or events)
Entries:   the number of entries left in the buffer
                 (the by pages will only read full pages)
Total:     Entries + Read + Overruns
Missed:    the number of entries that failed to write
Hit:       the number of entries that were written

The above example shows that it takes ~353 nanosecs per entry when
there is a reader, reading by pages (and no overruns)

The event by event reader slowed the producer down to 501 nanosecs.

[ Impact: see how changes to the ring buffer affect stability and performance ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In the hot path of the ring buffer "__rb_reserve_next" there's a big
if statement that does not even return back to the work flow.

	code;

	if (cross to next page) {

		[ lots of code ]

		return;
	}

	more code;

The condition is even the unlikely path, although we do not denote it
with an unlikely because gcc is fine with it. The condition is true when
the write crosses a page boundary, and we need to start at a new page.

Having this if statement makes it hard to read, but calling another
function to do the work is also not appropriate, because we are using a lot
of variables that were set before the if statement, and we do not want to
send them as parameters.

This patch changes it to a goto:

	code;

	if (cross to next page)
		goto next_page;

	more code;

	return;

next_page:

	[ lots of code]

This makes the code easier to understand, and a bit more obvious.

The output from gcc is practically identical. For some reason, gcc decided
to use different registers when I switched it to a goto. But other than that,
the logic is the same.

[ Impact: easier to read code ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When adding the EXPORT_SYMBOL to some of the tracing API, I accidently
used EXPORT_SYMBOL instead of EXPORT_SYMBOL_GPL. This patch fixes
that mistake.

[ Impact: export the tracing code only for GPL modules ]
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The only references in the kernel to the .text.sched section are in
recordmcount.pl.  Since the code it has is intended to be example code
it should refer to real kernel sections.  So change it to .sched.text
instead.

[ Impact: consistency in comments ]
Signed-off-by: NTim Abbott <tabbott@mit.edu>
LKML-Reference: <1241136371-10768-1-git-send-email-tabbott@mit.edu>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As a precaution, it is best to disable writing to the ring buffers
when reseting them.

[ Impact: prevent weird things if write happens during reset ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In the swap page ring buffer code that is used by the ftrace splice code,
we scan the page to increment the counter of entries read.

With the number of entries already in the page we simply need to add it.

[ Impact: speed up reading page from ring buffer ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, when the ring buffer writer overflows the buffer and must
write over non consumed data, we increment the overrun counter by
reading the entries on the page we are about to overwrite. This reads
the entries one by one.

This is not very effecient. This patch adds another entry counter
into each buffer page descriptor that keeps track of the number of
entries on the page. Now on overwrite, the overrun counter simply
needs to add the number of entries that is on the page it is about
to overwrite.

[ Impact: speed up of ring buffer in overwrite mode ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The entries counter in cpu buffer is not atomic. It can be updated by
other interrupts or from another CPU (readers).

But making entries into "atomic_t" causes an atomic operation that can
hurt performance. Instead we convert it to a local_t that will increment
a counter with a local CPU atomic operation (if the arch supports it).

Instead of fighting with readers and overwrites that decrement the counter,
I added a "read" counter. Every time a reader reads an entry it is
incremented.

We already have a overrun counter and with that, the entries counter and
the read counter, we can calculate the total number of entries in the
buffer with:

  (entries - overrun) - read

As long as the total number of entries in the ring buffer is less than
the word size, this will work. But since the entries counter was previously
a long, this is no different than what we had before.

Thanks to Andrew Morton for pointing out in the first version that
atomic_t does not replace unsigned long. I switched to atomic_long_t
even though it is signed. A negative count is most likely a bug.

[ Impact: keep accurate count of cpu buffer entries ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds stats to the ftrace ring buffers:

 # cat /debugfs/tracing/per_cpu/cpu0/stats
 entries: 42360
 overrun: 30509326
 commit overrun: 0
 nmi dropped: 0

Where entries are the total number of data entries in the buffer.

overrun is the number of entries not consumed and were overwritten by
the writer.

commit overrun is the number of entries dropped due to nested writers
wrapping the buffer before the initial writer finished the commit.

nmi dropped is the number of entries dropped due to the ring buffer
lock being held when an nmi was going to write to the ring buffer.
Note, this field will be meaningless and will go away when the ring
buffer becomes lockless.

[ Impact: let userspace know what is happening in the ring buffers ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The WARN_ON in the ring buffer when a commit is preempted and the
buffer is filled by preceding writes can happen in normal operations.
The WARN_ON makes it look like a bug, not to mention, because
it does not stop tracing and calls printk which can also recurse, this
is prone to deadlock (the WARN_ON is not in a position to recurse).

This patch removes the WARN_ON and replaces it with a counter that
can be retrieved by a tracer. This counter is called commit_overrun.

While at it, I added a nmi_dropped counter to count any time an NMI entry
is dropped because the NMI could not take the spinlock.

[ Impact: prevent deadlock by printing normal case warning ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

I'm adding a module to do a series of tests on the ring buffer as well
as benchmarks. This module needs to have more of the ring buffer API
exported. There's nothing wrong with reading the ring buffer from a
module.

[ Impact: allow modules to read pages from the ring buffer ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Document irqs for the newly created docbook.

[ Impact: add documentation ]
Signed-off-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: akpm@linux-foundation.org
Cc: rostedt@goodmis.org
Cc: fweisbec@gmail.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: wcohen@redhat.com
LKML-Reference: <73ff42be3420157667ec548e9b0e409c3cfad05f.1241107197.git.jbaron@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add tracepoint docbook. This will help us document and understand
what tracepoints are in the kernel. Since there are multiple
macros, and files that contain tracepoints.

[ Impact: add documentation ]
Signed-off-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: akpm@linux-foundation.org
Cc: rostedt@goodmis.org
Cc: fweisbec@gmail.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: wcohen@redhat.com
LKML-Reference: <84160b6bd94aff02455da7e12bad054d34c579a0.1241107197.git.jbaron@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add support to kernel-doc for tracepoint comments above TRACE_EVENT()
macro definitions. Paves the way for tracepoint docbook.

[ Impact: extend DocBook infrastructure ]
Signed-off-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: akpm@linux-foundation.org
Cc: rostedt@goodmis.org
Cc: fweisbec@gmail.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: wcohen@redhat.com
LKML-Reference: <d80706b6797e277924d2f3ec9af176c6b2951f88.1241107197.git.jbaron@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

"tracing: create automated trace defines" causes this compile error on s390,
as reported by Sachin Sant against linux-next:

 kernel/built-in.o: In function `__do_softirq':
 (.text+0x1c680): undefined reference to `__tracepoint_softirq_entry'

This happens because the definitions of the softirq tracepoints were moved
from kernel/softirq.c to kernel/irq/handle.c. Since s390 doesn't support
generic hardirqs handle.c doesn't get compiled and the definitions are
missing.

So move the tracepoints to softirq.c again.

[ Impact: fix build failure on s390 ]
Reported-by: NSachin Sant <sachinp@in.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <20090429135139.5fac79b8@osiris.boeblingen.de.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace the current event parser hack with a better one.  Filters are
no longer specified predicate by predicate, but all at once and can
use parens and any of the following operators:

numeric fields:

==, !=, <, <=, >, >=

string fields:

==, !=

predicates can be combined with the logical operators:

&&, ||

examples:

"common_preempt_count > 4" > filter

"((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter

If there was an error, the erroneous string along with an error
message can be seen by looking at the filter e.g.:

((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
^
parse_error: Field not found

Currently the caret for an error always appears at the beginning of
the filter; a real position should be used, but the error message
should be useful even without it.

To clear a filter, '0' can be written to the filter file.

Filters can also be set or cleared for a complete subsystem by writing
the same filter as would be written to an individual event to the
filter file at the root of the subsytem.  Note however, that if any
event in the subsystem lacks a field specified in the filter being
set, the set will fail and all filters in the subsytem are
automatically cleared.  This change from the previous version was made
because using only the fields that happen to exist for a given event
would most likely result in a meaningless filter.

Because the logical operators are now implemented as predicates, the
maximum number of predicates in a filter was increased from 8 to 16.

[ Impact: add new, extended trace-filter implementation ]
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905899.6416.121.camel@tropicana>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The new filter comparison ops need to be able to distinguish between
signed and unsigned field types, so add an is_signed flag/param to the
event field struct/trace_define_fields().  Also define a simple macro,
is_signed_type() to determine the signedness at compile time, used in the
trace macros.  If the is_signed_type() macro won't work with a specific
type, a new slightly modified version of TRACE_FIELD() called
TRACE_FIELD_SIGN(), allows the signedness to be set explicitly.

[ Impact: extend trace-filter code for new feature ]
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905893.6416.120.camel@tropicana>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Create a new event_filter object, and move the pred-related members
out of the call and subsystem objects and into the filter object - the
details of the filter implementation don't need to be exposed in the
call and subsystem in any case, and it will also help make the new
parser implementation a little cleaner.

[ Impact: refactor trace-filter code to prepare for new features ]
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905887.6416.119.camel@tropicana>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Follow up to afcfe024 in Linus' tree
("x86: mmiotrace: quieten spurious warning message")
Signed-off-by: NStuart Bennett <stuart@freedesktop.org>
Acked-by: NPekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1240946271-7083-5-git-send-email-stuart@freedesktop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* change function names to clear_* from set_*: in reality we only clear
  and restore page presence, and never unconditionally set present.
  Using clear_*({true, false}, ...) is therefore more honest than
  set_*({false, true}, ...)

* upgrade presence storage to pteval_t: doing user-space tracing will
  require saving and manipulation of the _PAGE_PROTNONE bit, in addition
  to the existing _PAGE_PRESENT changes, and having multiple bools stored
  and passed around does not seem optimal

[ Impact: refactor, clean up mmiotrace code ]
Signed-off-by: NStuart Bennett <stuart@freedesktop.org>
Acked-by: NPekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1240946271-7083-4-git-send-email-stuart@freedesktop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

kmmio_probe being *p and kmmio_fault_page being sometimes *f and
sometimes *p is not helpful.

[ Impact: cleanup ]
Signed-off-by: NStuart Bennett <stuart@freedesktop.org>
Acked-by: NPekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1240946271-7083-3-git-send-email-stuart@freedesktop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The warning output in trace_recursive_lock uses %d for a long when
it should be %ld.

[ Impact: fix compile warning ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Splice works with pages, it is much more effecient to use an entire
page than to copy bits over several pages.

Using logdev to trace the internals of the splice mechanism, I was
able to see that splice can be very aggressive. When tracing is
occurring, and the reader caught up to the writer, and the writer
is on the reader page, the reader will copy what is there into the
splice page. Splice may iterate over several pages and if the
writer is still writing to the page, the reader will keep copying
bits to new pages to pass to userspace.

This patch changes it to only pass data to userspace if the page
is full (the writer has left the page). This has a small side effect
that splice can not read a partial page, and must wait for the
page to fill. This should not be an issue. If tracing has stopped,
then a use of "read" will still read all of the page.

[ Impact: better performance for ring buffer splice code ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The splice code allocates a page even when the ring buffer is empty.
It detects the ring buffer being empty when it it fails to copy
anything from the ring buffer into the page.

This patch adds a check to see if there is anything in the ring buffer
before allocating a page.

Thanks to logdev for letting me trace the tracer to find this.

[ Impact: speed up due to removing unnecessary allocation ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The pages allocated for the splice binary buffer did not initialize
the ref count correctly. This caused pages not to be freed and causes
a drastic memory leak.

Thanks to logdev I was able to trace the tracer to find where the leak
was.

[ Impact: stop memory leak when using splice ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_dump is used for printing out the contents of the ftrace ring buffer
to the console on failure. Currently it uses a spinlock to synchronize
the output from multiple failures on different CPUs. This spin lock
currently is a normal spinlock and can cause issues with lockdep and
lock tracing.

This patch converts it to raw since it is for error handling only.
The lock is local to the ftrace_dump and is not used by any other
infrastructure.

[ Impact: prevent ftrace_dump from locking up by internal tracing ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

For proper module reference counting, the file_operations that modules use
must have the "owner" field set to the module. Unfortunately, the trace events
use share file_operations. The same file_operations are used by all both
kernel core and all modules.

This patch makes the modules allocate their own file_operations and
copies the functions from the core kernel. This allows those file
operations to be owned by the module.

Care is taken to free this code on module unload.

Thanks to Greg KH for reminding me that file_operations must be owned
by the module to have reference counting take place.

[ Impact: fix modular tracepoints / potential crash ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

With modules being able to add trace events, and the max trace event
counter is 16 bits (65536) we can overflow the counter easily
with a simple while loop adding and removing modules that contain
trace events.

This patch links together the registered trace events and on overflow
searches for available trace event ids. It will still fail if
over 65536 events are registered, but considering that a typical
kernel only has 22000 functions, 65000 events should be sufficient.
Reported-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The TRACE_FORMAT macro has been deprecated by the TRACE_EVENT macro.
There are no more users. All new users must use the TRACE_EVENT macro.

[ Impact: remove old functionality ]

Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The TRACE_FORMAT will soon be deprecated. This patch converts it to
the TRACE_EVENT macro.

Note, this change should also speed up the tracing.

[ Impact: remove a user of deprecated TRACE_FORMAT ]

Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The TRACE_FORMAT will soon be deprecated. This patch converts it to
the TRACE_EVENT macro.

Note, this change should also speed up the tracing.

[ Impact: remove a user of deprecated TRACE_FORMAT ]

Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes
an 'u32' to save the actually length for events which data size > 28.

This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA.

[ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49F13189.3090000@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In case a module uses the TRACE_EVENT macro for creating automated
events in ftrace, it may choose to use a different file name
than the defined system name, or choose to use a different path than
the default "include/trace/events" include path.

If this is done, then before including trace/define_trace.h the
header would define either "TRACE_INCLUDE_FILE" for the file
name or "TRACE_INCLUDE_PATH" for the include path.

If it does not define these, then the define_trace.h defines them
instead. If define trace defines them, then define_trace.h should
also undefine them before exiting. To do this a macro is used
to note this:

 #ifndef TRACE_INCLUDE_FILE
 # define TRACE_INCLUDE_FILE TRACE_SYSTEM
 # define UNDEF_TRACE_INCLUDE_FILE
 #endif

[...]

 #ifdef UNDEF_TRACE_INCLUDE_FILE
 # undef TRACE_INCLUDE_FILE
 # undef UNDEF_TRACE_INCLUDE_FILE
 #endif

The UNDEF_TRACE_INCLUDE_FILE acts as a CPP variable to know to undef
the TRACE_INCLUDE_FILE before leaving define_trace.h.

Unfortunately, due to cut and paste errors, the macros between
FILE and PATH got mixed up.

[ Impact: undef TRACE_INCLUDE_FILE and/or TRACE_INCLUDE_PATH when needed ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

currently these are paravirtulaized, doesn't appear any callers rely on
this (no pv_ops backends are using native_tlb and overriding cr3/4
access).

[ Impact: fix lockdep warning with paravirt and function tracer ]
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
LKML-Reference: <20090423172138.GR3036@sequoia.sous-sol.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The events exported by TRACE_EVENT are automated and are guaranteed
to be correct when used.

The internal ftrace structures on the other hand are more manually
exported. These require the ftrace maintainer to make sure they
are up to date.

This patch adds a size check to help flag when a type changes in
an internal ftrace data structure, and the update needs to be reflected
in the export.

If a export is incorrect, then the only harm is that the user space
tools will not know how to correctly read the internal structures of
ftrace.

[ Impact: help prevent inconsistent ftrace format print outs ]
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>