- 10 2月, 2016 7 次提交
-
-
由 Sven Eckelmann 提交于
The batadv_tvlv_container* functions state in their kernel-doc that they require tvlv.container_list_lock. Add an assert to automatically detect when this might have been ignored by the caller. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Simon Wunderlich 提交于
To allow future use of the window protected function with different maximum sequence numbers, add a parameter to set this value which was previously hardcoded. Another parameter added for future use is a flag to return whether the protection window has started. While at it, also fix the kerneldoc. Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
The references to the network device should be dropped inside the release function for batadv_hard_iface similar to what is done with the batman-adv internal datastructures. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Jean Sacren 提交于
Remove the unused code of sxgbe_xpcs. Reported-by: NJulia Lawall <julia.lawall@lip6.fr> Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJean Sacren <sakiwit@gmail.com> Cc: Byungho An <bh74.an@samsung.com> Cc: Girish K S <ks.giri@samsung.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1601191918470.2531@hadrienSigned-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sergei Shtylyov says: ==================== Factor out register bit twiddling in the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net-next.git' repo. We factor out the often repeated pattern of reading a register, AND'ing and/or OR'ing some bits, and then writing the value back. [1/2] ravb: factor out register bit twiddling code [2/2] sh_eth: factor out register bit twiddling code ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver has often repeated pattern of reading a register, AND'ing and/or OR'ing some bits and writing the value back. Factor the pattern out into sh_eth_modify() -- this saves 84 bytes of code with ARM gcc 4.7.3. While at it, update Cogent Embedded's copyright. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver has often repeated pattern of reading a register, AND'ing and/or OR'ing some bits and writing the value back. Factor the pattern out into ravb_modify() -- this saves 260 bytes of code with ARM gcc 4.7.3. While at it, update Cogent Embedded's copyrights. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2016 10 次提交
-
-
由 David S. Miller 提交于
Willem de Bruijn says: ==================== packet: tpacket gso and csum offload Extend PACKET_VNET_HDR socket option support to packet sockets with memory mapped rings. Patches 2 and 4 add support to tpacket_rcv and tpacket_snd. Patch 1 prepares for this by moving the relevant virtio_net_hdr logic out of packet_snd and packet_rcv into helper functions. GSO transmission requires all headers in the skb linear section. Patch 3 moves parsing of tx_ring slot headers before skb allocation to enable allocation with sufficient linear size. Changes v1->v2: - fix bounds checks: - subtract sizeof(vnet_hdr) before comparing tp_len to size_max - compare tp_len to size_max also with GSO, just do not truncate to MTU ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Support socket option PACKET_VNET_HDR together with PACKET_TX_RING. When enabled, a struct virtio_net_hdr is expected to precede the data in the ring. The vnet option must be set before the ring is created. The implementation reuses the existing skb_copy_bits code that is used when dev->hard_header_len is non-zero. Move this ll_header check to before the skb alloc and combine it with a test for vnet_hdr->hdr_len. Allocate and copy the max of the two. Verified with test program at github.com/wdebruij/kerneltools/blob/master/tests/psock_txring_vnet.c Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
GSO packet headers must be stored in the linear skb segment. Move tpacket header parsing before sock_alloc_send_skb. The GSO follow-on patch will later increase the skb linear argument to sock_alloc_send_skb if needed for large packets. The header parsing code does not require an allocated skb, so is safe to move. Later pass to tpacket_fill_skb the computed data start and length. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Support socket option PACKET_VNET_HDR together with PACKET_RX_RING. When enabled, a struct virtio_net_hdr will precede the data in the packet ring slots. Verified with test program at github.com/wdebruij/kerneltools/blob/master/tests/psock_rxring_vnet.c pkt: 1454269209.798420 len=5066 vnet: gso_type=tcpv4 gso_size=1448 hlen=66 ecn=off csum: start=34 off=16 eth: proto=0x800 ip: src=<masked> dst=<masked> proto=6 len=5052 Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
packet_snd and packet_rcv support virtio net headers for GSO. Move this logic into helper functions to be able to reuse it in tpacket_snd and tpacket_rcv. This is a straighforward code move with one exception. Instead of creating and passing a separate gso_type variable, reuse vnet_hdr.gso_type after conversion from virtio to kernel gso type. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
Currently the bonding allows to set ad_actor_system and prio while the bond device is down, but these are actually applied only if there aren't any slaves yet (applied to bond device when first slave shows up, and to slaves at 3ad bind time). After this patch changes are applied immediately and the new values can be used/seen after the bond's upped so it's not necessary anymore to release all and enslave again to see the changes. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== bridge: mdb: flag offloaded mdb entries This patchset extends uapi to let the user know if an mdb entry is offloaded. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Elad Raz 提交于
Passing the port-group to br_mdb in order to allow direct access to the structure. br_mdb will later use the structure to reflect HW reflection status via "state" variable. Signed-off-by: NElad Raz <eladr@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Elad Raz 提交于
Change net_bridge_port_group 'state' member to 'flags' and define new set of flags internal to the kernel. Signed-off-by: NElad Raz <eladr@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Elad Raz 提交于
Add new bitmask member 'flags' to br_mdb_entry structure. Adding MDB_FLAGS_OFFLOAD bit which indicates MDB entries is offloaded to hardware. Signed-off-by: NElad Raz <eladr@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2016 23 次提交
-
-
由 Zhang Shengju 提交于
remove some redudant brackets, use sizeof(*) instead of sizeof(struct x). Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Unintentionally the default was changed to zero, fix that. Fixes: 12ed8244 ("ipv4: Namespaceify tcp syncookies sysctl knob") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Nikolay Borisov says: ==================== Namespaceify more of the tcp sysctl knobs This patch series continues making more of the tcp-related sysctl knobs be per net-namespace. Most of these apply per socket and have global defaults so should be safe and I don't expect any breakages. Having those per net-namespace is useful when multiple containers are hosted and it is required to tune the tcp settings for each independently of the host node. I've split the patches to be per-sysctl but after the review if the outcome is positive I'm happy to either send it in one big blob or just. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Antonio Quartulli says: ==================== This batch of patches includes a number of corrections and improvements for our kernel-doc. These changes also make sure that our doc is now properly processed by the kernel-doc parsing tool. Other than that you have a patch updating all the copyright lines to 2016 and another patch switching the URLs in our readme, Kconfig and MAINTAINERS file from "http" to "https". Both by Sven Eckelmann. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Nikolay Aleksandrov says: ==================== virtio_net: add ethtool get/set settings support Patch 1 adds ethtool speed/duplex validation functions which check if the value is defined. Patch 2 adds support for ethtool (get|set)_settings and uses the validation functions to check the user-supplied values. v2: split in 2 patches to allow everyone to make use of the validation functions and allow virtio_net devices to be half duplex v3: added a check to return error if the user tries to change anything else besides duplex/speed as per Michael's comment v4: Set port type to PORT_OTHER v5: clear diff1.port (ignore port) when checking for changes since we set it now and ethtool uses it in the set request Sorry about the pointless iterations, should've all covered now. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch allows the user to set and retrieve speed and duplex of the virtio_net device via ethtool. Having this functionality is very helpful for simulating different environments and also enables the virtio_net device to participate in operations where proper speed and duplex are required (e.g. currently bonding lacp mode requires full duplex). Custom speed and duplex are not allowed, the user-supplied settings are validated before applying. Example: $ ethtool eth1 Settings for eth1: ... Speed: Unknown! Duplex: Unknown! (255) $ ethtool -s eth1 speed 1000 duplex full $ ethtool eth1 Settings for eth1: ... Speed: 1000Mb/s Duplex: Full Based on a patch by Roopa Prabhu. Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
Add functions which check if the speed/duplex are defined. Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sowmini Varadhan says: ==================== sunvnet: perf tracepoint hooks Added some perf tracepoints to help track and debug sunvnet descriptor state at run-time. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Use sunvnet perf trace macros to monitor LDC message exchange state. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Add perf event macros for support of tracing and instrumentation of LDC state machine Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuchung Cheng says: ==================== tcp: congestion control refactoring This patch set refactors the sequence of congestion control, loss recovery, and transmission logic in TCP ack processing. The design goal is to decouple and sequence them in the following order: 0. ACK accounting: free or tag sent packets [unchanged] 1. loss recovery: identify lost/ecn packets and update congestion state 2. congestion control: up/down cwnd and pacing rate based on (1) 3. transmission: send new or retransmit old based on (1) and (2) This refactoring makes the cwnd changes more clear because it's done in one place. The packet accounting is also more robust especially for connections that do not support SACK. Patch 1-4 and 6 are refactoring and patch 5 improves TCP performance under reordering. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Refactor and consolidate cwnd and rate updates into a new function tcp_cong_control(). Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
This change enables congestion control to update cwnd based on not only packet cumulatively acked but also packets delivered out-of-order. This makes congestion control robust against packet reordering because it may raise cwnd as long as packets are being delivered once reordering has been detected (i.e., it only cares the amount of packets delivered, not the ordering among them). Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
A small refactoring that gets number of packets cumulatively acked from tcp_clean_rtx_queue() directly. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-