- 25 10月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
Now back to kernel.org but without -2.6 suffix. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 10月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
The audio_feature_info[] array should contain all entries for UAC2_FU_*, but currently a few last entries are missing. Even though, the driver tries to probe these entries in parse_audio_feature_unit() and may access the range over the array. This patch fixes the bug by limiting the loop size properly using ARRAY_SIZE() instead of a hard-coded magic number. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 William Light 提交于
This adds partial support for the Maschine controller by Native Instruments. Supported now are the 1x1 MIDI interface and the 41 buttons, 11 endless rotary encoders, and 16 pressure-sensitive drum pads. Still to work on are the dimmable LEDs and the two monochrome screens. Signed-off-by: NWilliam Light <wrl@illest.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 William Light 提交于
There was a case where a newly-registered input device could be opened before a necessary variable in the device structure was set. When code tried to use the variable in the URB reply callback, it would cause an Oops. This fix sets the aforementioned variable before calling input_register_device. Signed-off-by: NWilliam Light <wrl@illest.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 10月, 2011 1 次提交
-
-
由 Feng Tang 提交于
The rpcm_file parameter is never used in current ALSA code, so remove it to make it cleaner. Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 10月, 2011 1 次提交
-
-
由 Clemens Ladisch 提交于
Handling of user control elements was implemented for all types except ENUMERATED. This type will be needed for the device-specific mixers of upcoming FireWire drivers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 10月, 2011 2 次提交
-
-
由 Dan Carpenter 提交于
This is mostly a static checker fix more than anything else. We're copying from a 64 char buffer into a 44 char buffer. The 64 character buffer is str[] in snd_mixer_oss_build_test_all(). The call tree is: snd_mixer_oss_build_test_all() -> snd_mixer_oss_build_test() -> snd_mixer_oss_build_test(). We never actually do fill str[] buffer all the way to 64 characters. The longest string is: sprintf(str, "%s Playback Switch", ptr->name); ptr->name is a 32 character buffer so 32 plus 16 characters for " Playback Switch" still puts us over the 44 limit from "id.name". Most likely ptr->name never gets filled to the limit, but we can't really change the size of that buffer so lets just use strlcpy() here and be safe. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Stefan Richter 提交于
There is a lock inversion between fwspk->mutex and pcm->open_mutex reported by lockdep when fwspk_hw_free is called. Fixed by copying the fix from the same former issue in the isight sound driver (commit f3f7c183 "ALSA: isight: fix locking"). Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 9月, 2011 1 次提交
-
-
由 Dan Carpenter 提交于
sound_timer.info.name is a 32 character buffer. This function only has one caller (in sound/oss/ad1848.c) and it passes as 128 character buffer as "name". I don't know if this is a problem in real life, and I doubt we're going to add more OSS drivers so it's unlikely to become an issue. But we may as well take care of it. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 9月, 2011 1 次提交
-
-
由 Clemens Ladisch 提交于
There are certain devices that are reportedly so slow that they need more than 100 ms to handle control transfers. Therefore, increase the timeout in mixer(_quirks).c to 1000 ms. The timeout parameter of snd_usb_ctl_msg() is now constant, so we can drop it. Reported-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 9月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
snd-aloop driver is virtual and has no need for allocating contiguous pages. It'll be more system-friendly to use vmalloc buffers. Tested-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 9月, 2011 4 次提交
-
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
This makes the code cleaner and silences a Sparse complaint: sound/pci/rme9652/hdspm.c:6341:23: warning: incorrect type in assignment (incompatible argument 4 (different address spaces)) sound/pci/rme9652/hdspm.c:6341:23: expected int ( *ioctl )( ... ) sound/pci/rme9652/hdspm.c:6341:23: got int ( static [toplevel] *<noident> )( ... ) sound/pci/rme9652/hdspm.c:6102:44: warning: dereference of noderef expression sound/pci/rme9652/hdspm.c:6225:50: warning: dereference of noderef expression sound/pci/rme9652/hdspm.c:6264:50: warning: dereference of noderef expression sound/pci/rme9652/hdspm.c:6283:50: warning: dereference of noderef expression sound/pci/rme9652/hdspm.c:6289:59: warning: dereference of noderef expression Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
Smatch has a new check for Rosenberg type information leaks where structs are copied to the user with uninitialized stack data in them. The status struct has a hole in it, and on some paths not all the members were initialized. struct hdspm_status { unsigned char card_type; /* 0 1 */ /* XXX 3 bytes hole, try to pack */ enum hdspm_syncsource autosync_source; /* 4 4 */ long long unsigned int card_clock; /* 8 8 */ The hdspm_version struct had holes in it as well. struct hdspm_version { unsigned char card_type; /* 0 1 */ char cardname[20]; /* 1 20 */ /* XXX 3 bytes hole, try to pack */ unsigned int serial; /* 24 4 */ short unsigned int firmware_rev; /* 28 2 */ /* XXX 2 bytes hole, try to pack */ int addons; /* 32 4 */ Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use macro to improve readability. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 9月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
-
由 Ben Hutchings 提交于
Commit 96760015 ("ALSA: fm801: add error handling if auto-detect fails") seems to break systems that were previously working without a tuner. As a bonus, this should fix init and cleanup for the case where the tuner is explicitly disabled. Reported-and-tested-by: NHor Jiun Shyong <jiunshyong@gmail.com> References: http://bugs.debian.org/641946Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org [v3.0+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ben Hutchings 提交于
Commit 96760015 ("ALSA: fm801: add error handling if auto-detect fails") added incorrect error handling. Once we have successfully called snd_device_new(), the cleanup function fm801_free() will automatically be called by snd_card_free() and we must *not* also call fm801_free() directly. Reported-by: NHor Jiun Shyong <jiunshyong@gmail.com> References: http://bugs.debian.org/641946Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org [v3.0+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 9月, 2011 6 次提交
-
-
由 David Henningsson 提交于
Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add the PCM rule to allow disabling the PCM playback SRC. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add the PCM rule to allow disabling the PCM playback SRC. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add the PCM rules to allow disabling the PCM playback and capture SRCs. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add a helper function to allow drivers to disable hardware resampling when the application has specified the SNDRV_PCM_HW_PARAMS_NORESAMPLE flag. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
The installation of the minimum period size constraint in the PCM open callbacks was not checked for errors. Add this check, and move the call to the beginning of the function to avoid having to do any cleanups in the error case. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 9月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
When the system has only the headphone and the line-out jacks without speakers, the current auto-mute code doesn't work. It's because the spec->automute_lines flag is wrongly referred in update_speakers(). This flag must be meaningless when spec->automute_hp_lo isn't set, thus they should be always coupled. The patch fixes the problem and add a comment to indicate the relationship briefly. BugLink: http://bugs.launchpad.net/bugs/851697Reported-by: NDavid Henningsson <david.henningsson@canonical.com> Tested-By: NJayne Han <jayne.han@canonical.com> Cc: stable@kernel.org (3.0) Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 9月, 2011 2 次提交
-
-
由 Daniele Guerrieri 提交于
Roland UM-ONE midi usb interface differs from Roland UM-1. Signed-off-by: NDaniele Guerrieri <d.guerrieri@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
- 15 9月, 2011 2 次提交
-
-
由 Arjan van de Ven 提交于
wait_for_avail() in pcm_lib.c has a race in it (observed in practice by an Intel validation group). The function is supposed to return once space in the buffer has become available, or if some timeout happens. The entity that creates space (irq handler of sound driver and some such) will do a wake up on a waitqueue that this function registers for. However there are two races in the existing code 1) If space became available between the caller noticing there was no space and this function actually sleeping, the wakeup is missed and the timeout condition will happen instead 2) If a wakeup happened but not sufficient space became available, the code will loop again and wait for more space. However, if the second wake comes in prior to hitting the schedule_timeout_interruptible(), it will be missed, and potentially you'll wait out until the timeout happens. The fix consists of using more careful setting of the current state (so that if a wakeup happens in the main loop window, the schedule_timeout() falls through) and by checking for available space prior to going into the schedule_timeout() loop, but after being on the waitqueue and having the state set to interruptible. [tiwai: the following changes have been added to Arjan's original patch: - merged akpm's fix for waitqueue adding order into a single patch - reduction of duplicated code of avail check ] Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
- 14 9月, 2011 6 次提交
-
-
由 Daniel Mack 提交于
No code altered at this point, simply preparing for upcoming refactorizations. Signed-off-by: NDaniel Mack <zonque@gmail.com> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mack 提交于
Move code from endpoint.c into a new file called stream.c and rename functions so that their names actually reflect what they're doing. This way, endpoint.c will be available to functions that hold all the endpoint logic. Signed-off-by: NDaniel Mack <zonque@gmail.com> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mack 提交于
Sort its entries in alphabetical order. Signed-off-by: NDaniel Mack <zonque@gmail.com> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mack 提交于
The endpoint usage field is described in the USB 2.0 specification, chapter 9.6.6. Also, move the sync type fields block down by some lines to reflect the fact that these are also stuffed in bmAttributes. Signed-off-by: NDaniel Mack <zonque@gmail.com> Acked-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
This patch fixes "Surround Speaker Playback Volume" being cut off. (Commit b4dabfc4 was probably meant to fix this, but it fixed only the "Switch" name, not the "Volume" name.) Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 9月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
The recursive search of widget connections in snd_hda_get_conn_index() must be terminated at the pin and the audio-out widgets. Otherwise you'll get "too deep connection" warnings unnecessarily. Reported-by: NFrancis Moreau <francis.moro@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2011 4 次提交
-
-
由 Arnd Bergmann 提交于
A fix merged in 3.1-rc2 introduced a small regression, this should get it to build again. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
The i2c core will clear the clientdata pointer automatically. We don't have to set the `data' field to NULL in remove() or if probe() failed anymore. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Axel Lin 提交于
The i2c core will clear the clientdata pointer automatically. We don't have to set the `data' field to NULL in remove() or if probe() failed anymore. Also remove a unneeded NULL checking for kfree. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Raymond Yau 提交于
YDSXGR_LEGACYOUTVOL is a Playback Volume control for OPL3 FM Synth. Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-