If accumulator value is zero, just return the value of previously
calculated product. This brings logic in MADDF/MSUBF implementation
closer to the logic in ADD/SUB case.
Signed-off-by: NMiodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: NGoran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16512/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In this sequence the 'move' is assumed in the delay slot of the 'beq',
but head.S is in reorder mode and the former gets pushed one 'nop'
farther by the assembler.

The corrected behavior made booting with an UHI supplied dtb erratic.

Fixes: 15f37e15 ("MIPS: store the appended dtb address in a variable")
Signed-off-by: NKarl Beldan <karl.beldan+oss@gmail.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16614/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This commit fixes a "maybe-uninitialized" build failure in
arch/mips/kvm/tlb.c when KVM, DYNAMIC_DEBUG and JUMP_LABEL are all
enabled. The failure is:

In file included from ./include/linux/printk.h:329:0,
                 from ./include/linux/kernel.h:13,
                 from ./include/asm-generic/bug.h:15,
                 from ./arch/mips/include/asm/bug.h:41,
                 from ./include/linux/bug.h:4,
                 from ./include/linux/thread_info.h:11,
                 from ./include/asm-generic/current.h:4,
                 from ./arch/mips/include/generated/asm/current.h:1,
                 from ./include/linux/sched.h:11,
                 from arch/mips/kvm/tlb.c:13:
arch/mips/kvm/tlb.c: In function ‘kvm_mips_host_tlb_inv’:
./include/linux/dynamic_debug.h:126:3: error: ‘idx_kernel’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \
   ^~~~~~~~~~~~~~~~~~
arch/mips/kvm/tlb.c:169:16: note: ‘idx_kernel’ was declared here
  int idx_user, idx_kernel;
                ^~~~~~~~~~

There is a similar error relating to "idx_user". Both errors were
observed with GCC 6.

As far as I can tell, it is impossible for either idx_user or idx_kernel
to be uninitialized when they are later read in the calls to kvm_debug,
but to satisfy the compiler, add zero initializers to both variables.
Signed-off-by: NJames Cowgill <James.Cowgill@imgtec.com>
Fixes: 57e3869c ("KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASID")
Cc: <stable@vger.kernel.org> # 4.11+
Acked-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.

This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.

Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.

One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications.  For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).

Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.

Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: NOleg Nesterov <oleg@redhat.com>
Original-patch-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The .its targets require information about the kernel binary, such as
its entry point, which is extracted from the vmlinux ELF. We therefore
require that the ELF is built before the .its files are generated.
Declare this requirement in the Makefile such that make will ensure this
is always the case, otherwise in corner cases we can hit issues as the
.its is generated with an incorrect (either invalid or stale) entry
point.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Fixes: cf2a5e0b ("MIPS: Support generating Flattened Image Trees (.itb)")
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.9+
Patchwork: https://patchwork.linux-mips.org/patch/16179/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The code handling the pop76 opcode (ie. bnezc & jialc instructions) in
__compute_return_epc_for_insn() needs to set the value of $31 in the
jialc case, which is encoded with rs = 0. However its check to
differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately
backwards, meaning that if we emulate a bnezc instruction we clobber $31
& if we emulate a jialc instruction it actually behaves like a jic
instruction.

Fix this by inverting the check of rs to match the way the instructions
are actually encoded.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Fixes: 28d6f93d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
Cc: stable <stable@vger.kernel.org> # v4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16178/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When ftrace is used with kprobes, it is possible for a kprobe to contain
an invalid location (ie. only initialised to 0 and not to a specific
location in the code). Trying to perform a cache flush on such location
leads to a crash r4k_flush_icache_range().

Fixes: c1bf207d ("MIPS: kprobe: Add support.")
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16296/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since introduction of tracing for init functions the in_kernel_space()
check is no longer correct, as it ignores the init sections. As a
result, when probes are inserted (and disabled) in the init functions,
a branch instruction is inserted instead of a nop, which is likely to
result in random crashes during boot.

Remove the MIPS-specific in_kernel_space() method and replace it with a
generic core_kernel_text() that also checks for init sections during
system boot stage.

Fixes: 42c269c8 ("ftrace: Allow for function tracing to record init functions on boot up")
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Tested-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16092/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Space reserved for PKMap should span from PKMAP_BASE to FIXADDR_START.
For large page sizes this is not the case as eg. for 64k pages the range
currently defined is from 0xfe000000 to 0x102000000(!!) which obviously
isn't right.
Remove the hardcoded location and set the BASE address as an offset from
FIXADDR_START.

Since all PKMAP ptes have to be placed in a contiguous memory, ensure
that this is the case by placing them all in a single page. This is
achieved by aligning the end address to pkmap pages count pages.
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15950/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

All PTEs used by PKMAP should be allocated in a contiguous memory area,
but we do not currently have a mechanism to enforce that, so ensure that
we don't try to allocate more entries than would fit in a single page.

Current fixed value of 1024 would not work with XPA enabled when
sizeof(pte_t)==8 and we need two pages to store pte tables.
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15949/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

fixrange_init operates at PMD-granularity and expects the addresses to
be PMD-size aligned, but currently that might not be the case for
PKMAP_BASE unless it is defined properly, so ensure a correct alignment
is used before passing the address to fixrange_init.

fixed mappings: only align the start address that is passed to
fixrange_init rather than the value before adding the size, as we may
end up with uninitialised upper part of the range.
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15948/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

All performance counters on I6400 (odd and even) are capable of counting
any of the available events, so drop current logic of using the extra
bit to determine which counter to use.
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Fixes: 4e88a862 ("MIPS: Add cases for CPU_I6400")
Fixes: fd716fca ("MIPS: perf: Fix I6400 event numbers")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15991/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes a regression in commit 4d6501dc where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().

We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().

Review notes:

 - As far as I can tell, copy_process() is the only user of
   copy_thread_tls(), which is the only caller of copy_thread() for
   architectures that don't implement copy_thread_tls().

 - After this patch, there is no arch-specific code touching
   p->set_child_tid or p->clear_child_tid whatsoever.

 - It may look like MIPS/OpenRISC wanted to always have these fields be
   NULL, but that's not true, as copy_process() would unconditionally
   set them again _after_ calling copy_thread_tls() before commit
   4d6501dc.

Fixes: 4d6501dc ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only
Acked-by: NStafford Horne <shorne@gmail.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.

Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.

As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.

Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.

As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.

Fixes: 4027494a ('ARM: dts: add arm/arm64 include symlinks')
Reported-by: NRussell King <linux@armlinux.org.uk>
Reported-by: NOmar Sandoval <osandov@osandov.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NRob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arch <linux-arch@vger.kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NMark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

While examining output from trial builds with -Wformat-security enabled,
many strings were found that should be defined as "const", or as a char
array instead of char pointer.  This makes some static analysis easier,
by producing fewer false positives.

As these are all trivial changes, it seemed best to put them all in a
single patch rather than chopping them up per maintainer.

Link: http://lkml.kernel.org/r/20170405214711.GA5711@beastSigned-off-by: NKees Cook <keescook@chromium.org>
Acked-by: Jes Sorensen <jes@trained-monkey.org>	[runner.c]
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kejian Yan <yankejian@huawei.com>
Cc: Daode Huang <huangdaode@hisilicon.com>
Cc: Qianqian Xie <xieqianqian@huawei.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: Jason Litzinger <jlitzingerdev@gmail.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This typo is quite common.  Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.orgSigned-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bit searching functions accept "unsigned long" indices but
"nr_cpumask_bits" is "int" which is signed, so inevitable sign
extensions occur on x86_64.  Those MOVSX are #1 MOVSX bloat by number of
uses across whole kernel.

Change "nr_cpumask_bits" to unsigned, this number can't be negative
after all.  It allows to do implicit zero-extension on x86_64 without
MOVSX.

Change signed comparisons into unsigned comparisons where necessary.

Other uses looks fine because it is either argument passed to a function
or comparison is already unsigned.

Net win on allyesconfig type of kernel: ~2.8 KB (!)

	add/remove: 0/0 grow/shrink: 8/725 up/down: 93/-2926 (-2833)
	function                                     old     new   delta
	xen_exit_mmap                                691     735     +44
	qstat_read                                   426     440     +14
	__cpufreq_cooling_register                  1678    1687      +9
	trace_rb_cpu_prepare                         447     455      +8
	vermagic                                      54      60      +6
	nfp_driver_version                            54      60      +6
	rcu_torture_stats_print                     1147    1151      +4
	find_next_push_cpu                           267     269      +2
	xen_irq_resume                               961     960      -1
				...
	init_vp_index                                946     906     -40
	od_set_powersave_bias                        328     281     -47
	power_cpu_exit                               193     139     -54
	arch_show_interrupts                        3538    3484     -54
	select_idle_sibling                         1558    1471     -87
	Total: Before=158358910, After=158356077, chg -0.00%

Same arguments apply to "nr_cpu_ids" but I haven't yet found enough
courage to delve into this issue (and proper fix may require new type
"cpu_t" which is whole separate story).

Link: http://lkml.kernel.org/r/20170309205322.GA1728@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users were expected to use kvm_check_request() for testing and clearing,
but request have expanded their use since then and some users want to
only test or do a faster clear.

Make sure that requests are not directly accessed with bit operations.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

all architectures converted
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Enable the Octeon MMC driver in the defconfig.
Signed-off-by: NSteven J. Hill <Steven.Hill@cavium.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

warning: (SB1XXX_CORELIS) selects DEBUG_INFO which has unmet direct dependencies (DEBUG_KERNEL && !COMPILE_TEST)
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes the following modpost error:

ERROR: "periph_rev" [drivers/net/ethernet/broadcom/sb1250-mac.ko] undefined!
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

In all cases we know which BAR it is.  Passing it in means that arch code
(or generic code; watch this space) won't have to go looking for it again.
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The Malta platform is the only platform remaining to probe the GIC
clocksource via gic_clocksource_init. This route hardcodes an expected
virq number based on MIPS_GIC_IRQ_BASE, which can be fragile to the
eventual virq layout. Instread, probe the driver using the preferred and
more modern devicetree method.

Before the driver is probed, set the "clock-frequency" property of the
devicetree node to the value detected by Malta platform code.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1492604806-23420-1-git-send-email-matt.redfearn@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

We can declare it <linux/pci.h> even on platforms where it isn't going to
be defined.  There's no need to have it littered through the various
<asm/pci.h> files.
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.

Make the MIPS arch's clockevent drivers initialize these fields properly.

This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from these
drivers.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: John Crispin <john@phrozen.org>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NNicolai Stange <nicstange@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

With commit 23dac14d ("MIPS: PCI: Use struct list_head lists") new
controllers are added after the specified head where they where added
before the specified head previously.

Use list_add_tail to restore the former order.

This patches fixes the following PCI error on lantiq:

  pci 0000:01:00.0: BAR 0: error updating (0x1c000004 != 0x000000)

Fixes: 23dac14d ("MIPS: PCI: Use struct list_head lists")
Signed-off-by: NMathias Kresin <dev@kresin.me>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15808/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 41c594ab ("[MIPS] MT: Improved multithreading support.")
added an else case to an if statement in do_page_fault() (which has
since gained 2 leading underscores) for some unclear reason. If the
condition in the if statement evaluates true then we execute a goto &
branch elsewhere anyway, so the else has no effect. Combined with an #if
0 block with misleading indentation introduced in the same commit it
makes the code less clear than it could be.

Remove the unnecessary else statement & de-indent the printk within
the #if 0 block in order to make the code easier for humans to parse.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15842/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit fbde2d7d ("MIPS: Add generic SMP IPI support") introduced a
sanity check that an IPI IRQ domain can be found during boot, in order
to ensure that IPIs are able to be set up in systems using such domains.
However it was added at a point where systems may have used an IPI IRQ
domain in some situations but not others, and we could not know which
were the case until runtime, so commit 578bffc8 ("MIPS: Don't BUG_ON
when no IPI domain is found") made that check simply skip IPI init if no
domain were found in order to fix the boot for systems such as QEMU
Malta.

We now use IPI IRQ domains for the MIPS CPU interrupt controller, which
means systems which make use of IPI IRQ domains will always do so when
running on multiple CPUs. As a result we now strengthen the sanity check
to ensure that an IPI IRQ domain is found when multiple CPUs are present
in the system.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove the smp-mt IPI code that supported single-core multithreaded
systems and instead make use of the IPI IRQ domain support provided by
the MIPS CPU interrupt controller driver. This removes some less than
nice code, the horrible split between arch & board code and the
duplication that led to within board code.

The lantiq portion of this patch has only been compile tested. Malta has
been tested & is functional.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15837/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

KGDB is a kernel debug stub and it can't be used to debug userland as it
can only safely access kernel memory.

On MIPS however KGDB has always got the register state of sleeping
processes from the userland register context at the beginning of the
kernel stack. This is meaningless for kernel threads (which never enter
userland), and for user threads it prevents the user seeing what it is
doing while in the kernel:

(gdb) info threads
  Id   Target Id         Frame
  ...
  3    Thread 2 (kthreadd) 0x0000000000000000 in ?? ()
  2    Thread 1 (init)   0x000000007705c4b4 in ?? ()
  1    Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201

Get the register state instead from the (partial) kernel register
context stored in the task's thread_struct for resume() to restore. All
threads now correctly appear to be in context_switch():

(gdb) info threads
  Id   Target Id         Frame
  ...
  3    Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
  2    Thread 1 (init)   context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
  1    Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201

Call clobbered registers which aren't saved and exception registers
(BadVAddr & Cause) which can't be easily determined without stack
unwinding are reported as 0. The PC is taken from the return address,
such that the state presented matches that found immediately after
returning from resume().

Fixes: 88547001 ("[MIPS] kgdb: add arch support for the kernel's kgdb core")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15829/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We declare CONFIG_ARCH_HAS_ILOG2_U32 & CONFIG_ARCH_HAS_ILOG2_U64 in
Kconfig, but they are always false since nothing ever selects them. The
generic fls-based implementation is efficient for MIPS anyway. Remove
the redundant Kconfig entries.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15840/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Turning on DEBUG in smp-cps.c, or compiling the kernel with
CONFIG_DYNAMIC_DEBUG enabled results the build error:

arch/mips/kernel/smp-cps.c: In function 'play_dead':
./include/linux/dynamic_debug.h:126:3: error: 'core' may be used
uninitialized in this function [-Werror=maybe-uninitialized]

Fix this by always initialising the variable.

Fixes: 0d2808f3 ("MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processors")
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15848/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The generic_defconfig is used for platforms like SEAD3 which do not
usually have fixed storage available, therefore NFS is the preferred
location of the RFS.
When the upstream kernel defconfig is built & tested on platforms such
as SEAD3 this leads to essentially false failures when the RFS fails to
mount.

There is little harm in having this feature enabled by default, so
enable it in the defconfig. Kernel autoconfiguration & DHCP must also be
selected to allow RFS on NFS.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15853/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

After the split of linux/sched.h, KASLR stopped building.

Fix this by including the correct header file for init_thread_union
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15849/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch_check_elf contains a usage of current_cpu_data that will call
smp_processor_id() with preemption enabled and therefore triggers a
"BUG: using smp_processor_id() in preemptible" warning when an fpxx
executable is loaded.

As a follow-up to commit b244614a ("MIPS: Avoid a BUG warning during
prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by
using raw_current_cpu_data instead. The rationale quoted from the previous
commit:

"It is assumed throughout the kernel that if any CPU has an FPU, then
all CPUs would have an FPU as well, so it is safe to perform the check
with preemption enabled - change the code to use raw_ variant of the
check to avoid the warning."

Fixes: 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks")
Signed-off-by: NJames Cowgill <James.Cowgill@imgtec.com>
CC: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15951/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In commit 827456e7 ("MIPS: Export _mcount alongside its definition")
the EXPORT_SYMBOL macro exporting _mcount was moved from C code into
assembly. Unlike C, exported assembly symbols need to have a function
prototype in asm/asm-prototypes.h for modversions to work properly.
Without this, modpost prints out this warning:

     WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed,
     symbol will not be versioned.

Fix by including asm/ftrace.h (where _mcount is declared) in
asm/asm-prototypes.h.

Fixes: 827456e7 ("MIPS: Export _mcount alongside its definition")
Signed-off-by: NJames Cowgill <James.Cowgill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15952/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>