now that CONFIG_OF is defined globally
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

so that we can make CONFIG_OF global and remove it from
the architecture Kconfig files later.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

I forget to remove pci Kconfig option.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Remove ancient Kconfig option for consistent code.
MMU uses cache inhibit pages.

noMMU uses UNCACHE SHADOW feature where is used double ram size.
For example:
Physical ram is 256MB and cache are setup to cover the same size.
But if you setup in HW that size is 512MB and cache covers 256MB
than you can use adresses from 256-512MB without caches and
correspond with 0-256MB with cache. That's why I am using
dcache base/high addresses to find out uncache area.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

We don't use CONSISTENT option from Kconfig that's why I am removing them.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This patch is based on powerpc patch
64f16502

We did some cleanups and removed powerpc parts.
There is one new debug early listing function too.

Exclude function is only in Debug options.

We tested in on custom board.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

There are two parts of changes. The first is just enable
PCI in Makefiles and in Kconfig. The second is the rest of
missing files. I didn't want to add it with previous patch
because that patch is too big.

Current Microblaze toolchain has problem with weak symbols
that's why is necessary to apply this changes to be possible
to compile pci support.
Xilinx knows about this problem.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Add DMA support for Microblaze. There are some part of this new feature:
1. Basic DMA support
2. Enable DMA debug option
3. Setup notifier

Ad 1. dma-mapping come from powerpc and x86 version and it is based on
generic dma-mapping-common.h

Ad 2. DMA support debug features which is used in generic file.
For more information please look at Documentation/DMA-API.txt

Ad 3. notifier is very important to setup dma_ops. Without this part
for example ll_temac driver failed because there are no setup dma operations.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

For simpleImage format we need to compile DTC. There is still possibility
to compile only Linux kernel without DTB compiled-in.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze uses timer interrupt mode. Microblaze don't have
any performance counter that's why we use just simple implementation.
Signed-off-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

For more information look at Documentation/trace folder.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

With dynamic function tracer, by default, _mcount is defined as an
"empty" function, it returns directly without any more action. When
enabling it in user-space, it will jump to a real tracing
function(ftrace_caller), and do the real job for us.

Differ from the static function tracer, dynamic function tracer provides
two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the
tracing of some indicated kernel functions(set_ftrace_filter).

In the kernel version, there is only one "_mcount" string for every
kernel function, so, we just need to match this one in mcount_regex of
scripts/recordmcount.pl.

For more information please look at code and Documentation/trace folder.

Steven ACK that scripts/recordmcount.pl part.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Implement MCOUNT_TEST in asm code - it is faster than use
generic code
Signed-off-by: NMichal Simek <monstr@monstr.eu>

If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to
_mcount will be inserted into each kernel function. so, there is a
possibility to trace the kernel functions in _mcount.

This patch add the specific _mcount support for static function
tracing. by default, ftrace_trace_function is initialized as
ftrace_stub(an empty function), so, the default _mcount will introduce
very little overhead. after enabling ftrace in user-space, it will jump
to a real tracing function and do static function tracing for us.

Commit message from Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze needs to do lock_init very soon because MMU init calls lock functions.

Here is the explanation from Peter Zijlstra why we have to enable
__ARCH_WANTS_INTERRUPTS_ON_CTSW.

"So we schedule while holding rq->lock (for obvious reasons), but since
lockdep tracks held locks per tasks, we need to transfer the held state
from the prev to the next task. We do this by explicity calling
spin_release(&rq->lock) in context_switch() right before switch_to(),
and calling spin_acquire(&rq->lock) in
finish_task_switch()->finish_lock_switch().

Now, for some reason lockdep thinks that interrupts got enabled over the
context switch (git grep __ARCH_WANTS_INTERRUPTS_ON_CTSW arch/microblaze
doesn't seem to turn up anything).

Clearly trying to acquire the rq->lock with interrupts enabled is a bad
idea and lockdep warns you about this."
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This is working implemetation but the problem is that
Microblaze misses frame pointer that's why is there
big loop which trace and show all addresses which are in text.
It shows addresses which are in registers, etc.

This is problem and this is the reason why all Microblaze
traces are wrong. There is an option to do hacks and trace
the kernel code but this is too complicated.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Merge common code between Microblaze and PowerPC.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Reviewed-by: NWolfram Sang <w.sang@pengutronix.de>
Tested-by: NMichal Simek <monstr@monstr.eu>

Add architectural support for USB EHCI host controllers. It has been tested
using the USB EHCI host controller from Xilinx Inc., using both High Speed
devices and Full Speed devices.
Signed-off-by: NJulie Zhu <julie.zhu@xilinx.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

The microblaze checksum code is mostly identical to
the asm-generic+lib version, so use that instead.
Signed-off-by: NRemis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze does not support the Linux DMA mapping API
at this point, so disable CONFIG_NO_DMA. This lets
us use the generic dma-mapping-broken.h implementation
instead of providing a different copy.

Any drivers that try to use DMA mapping now get
omitted from Kconfig or produce a link error, rather
than failing silently at run time.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Reviewed-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NJohn Linn <john.linn@xilinx.com>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>