- 14 10月, 2016 19 次提交
-
-
由 Shmulik Ladkani 提交于
Move detection logic that tests whether device expects skb data to point at mac_header upon xmit into a function. Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shmulik Ladkani 提交于
'tcfm_ok_push' specifies whether a mac_len sized push is needed upon egress to the target device (if action is performed at ingress). Rename it to 'tcfm_mac_header_xmit' as this is actually an attribute of the target device (and use a bool instead of int). This allows to decouple the attribute from the action to be taken. Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan W. Nielsen 提交于
Edge-Rate cleanup include the following: - Updated device tree bindings documentation for edge-rate - The edge-rate is now specified as a "slowdown", meaning that it is now being specified as positive values instead of negative (both documentation and implementation wise). - Only explicitly documented values for "vsc8531,vddmac" and "vsc8531,edge-slowdown" are accepted by the device driver. - Deleted include/dt-bindings/net/mscc-phy-vsc8531.h as it was not needed. - Read/validate devicetree settings in probe instead of init Signed-off-by: NAllan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: NRaju Lakkaraju <raju.lakkaraju@microsemi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This reverts commit 6ae23ad3. The code has been in kernel since 4.4 but there are no in tree code that uses. Unused code is broken code, remove it. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix various build warnings in tlan/qed/xen-netback drivers, from Arnd Bergmann. 2) Propagate proper error code in strparser's strp_recv(), from Geert Uytterhoeven. 3) Fix accidental broadcast of RTM_GETTFILTER responses, from Eric Dumazret. 4) Need to use list_for_each_entry_safe() in qed driver, from Wei Yongjun. 5) Openvswitch 802.1AD bug fixes from Jiri Benc. 6) Cure BUILD_BUG_ON() in mlx5 driver, from Tom Herbert. 7) Fix UDP ipv6 checksumming in netvsc driver, from Stephen Hemminger. 8) stmmac driver fixes from Giuseppe CAVALLARO. 9) Fix access to mangled IP6CB in tcp, from Eric Dumazet. 10) Fix info leaks in tipc and rtnetlink, from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net: bridge: add the multicast_flood flag attribute to brport_attrs net: axienet: Remove unused parameter from __axienet_device_reset liquidio: CN23XX: fix a loop timeout net: rtnl: info leak in rtnl_fill_vfinfo() tipc: info leak in __tipc_nl_add_udp_addr() net: ipv4: Do not drop to make_route if oif is l3mdev net: phy: Trigger state machine on state change and not polling. ipv6: tcp: restore IP6CB for pktoptions skbs netvsc: Remove mistaken udp.h inclusion. xen-netback: fix type mismatch warning stmmac: fix error check when init ptp stmmac: fix ptp init for gmac4 qed: fix old-style function definition netvsc: fix checksum on UDP IPV6 net_sched: reorder pernet ops and act ops registrations xen-netback: fix guest Rx stall detection (after guest Rx refactor) drivers/ptp: Fix kernel memory disclosure net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON qmi_wwan: add support for Quectel EC21 and EC25 openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev ...
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - sunrpc: fix writ espace race causing stalls - NFS: Fix inode corruption in nfs_prime_dcache() - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation() - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid - NFSv4: Open state recovery must account for file permission changes - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic Features: - Add support for tracking multiple layout types with an ordered list - Add support for using multiple backchannel threads on the client - Add support for pNFS file layout session trunking - Delay xprtrdma use of DMA API (for device driver removal) - Add support for xprtrdma remote invalidation - Add support for larger xprtrdma inline thresholds - Use a scatter/gather list for sending xprtrdma RPC calls - Add support for the CB_NOTIFY_LOCK callback - Improve hashing sunrpc auth_creds by using both uid and gid Bugfixes: - Fix xprtrdma use of DMA API - Validate filenames before adding to the dcache - Fix corruption of xdr->nwords in xdr_copy_to_scratch - Fix setting buffer length in xdr_set_next_buffer() - Don't deadlock the state manager on the SEQUENCE status flags - Various delegation and stateid related fixes - Retry operations if an interrupted slot receives EREMOTEIO - Make nfs boot time y2038 safe" * tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits) NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic fs: nfs: Make nfs boot time y2038 safe sunrpc: replace generic auth_cred hash with auth-specific function sunrpc: add RPCSEC_GSS hash_cred() function sunrpc: add auth_unix hash_cred() function sunrpc: add generic_auth hash_cred() function sunrpc: add hash_cred() function to rpc_authops struct Retry operation on EREMOTEIO on an interrupted slot pNFS: Fix atime updates on pNFS clients sunrpc: queue work on system_power_efficient_wq NFSv4.1: Even if the stateid is OK, we may need to recover the open modes NFSv4: If recovery failed for a specific open stateid, then don't retry NFSv4: Fix retry issues with nfs41_test/free_stateid NFSv4: Open state recovery must account for file permission changes NFSv4: Mark the lock and open stateids as invalid after freeing them NFSv4: Don't test open_stateid unless it is set NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation NFSv4: Fix a race when updating an open_stateid NFSv4: Fix a race in nfs_inode_reclaim_delegation() ...
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd updates from Bruce Fields: "Some RDMA work and some good bugfixes, and two new features that could benefit from user testing: - Anna Schumacker contributed a simple NFSv4.2 COPY implementation. COPY is already supported on the client side, so a call to copy_file_range() on a recent client should now result in a server-side copy that doesn't require all the data to make a round trip to the client and back. - Jeff Layton implemented callbacks to notify clients when contended locks become available, which should reduce latency on workloads with contended locks" * tag 'nfsd-4.9' of git://linux-nfs.org/~bfields/linux: NFSD: Implement the COPY call nfsd: handle EUCLEAN nfsd: only WARN once on unmapped errors exportfs: be careful to only return expected errors. nfsd4: setclientid_confirm with unmatched verifier should fail nfsd: randomize SETCLIENTID reply to help distinguish servers nfsd: set the MAY_NOTIFY_LOCK flag in OPEN replies nfs: add a new NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK constant nfsd: add a LRU list for blocked locks nfsd: have nfsd4_lock use blocking locks for v4.1+ locks nfsd: plumb in a CB_NOTIFY_LOCK operation NFSD: fix corruption in notifier registration svcrdma: support Remote Invalidation svcrdma: Server-side support for rpcrdma_connect_private rpcrdma: RDMA/CM private message data structure svcrdma: Skip put_page() when send_reply() fails svcrdma: Tail iovec leaves an orphaned DMA mapping nfsd: fix dprintk in nfsd4_encode_getdeviceinfo nfsd: eliminate cb_minorversion field nfsd: don't set a FL_LAYOUT lease for flexfiles layouts
-
由 Linus Torvalds 提交于
Merge tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs < XFS has gained super CoW powers! > ---------------------------------- \ ^__^ \ (oo)\_______ (__)\ )\/\ ||----w | || || Pull XFS support for shared data extents from Dave Chinner: "This is the second part of the XFS updates for this merge cycle. This pullreq contains the new shared data extents feature for XFS. Given the complexity and size of this change I am expecting - like the addition of reverse mapping last cycle - that there will be some follow-up bug fixes and cleanups around the -rc3 stage for issues that I'm sure will show up once the code hits a wider userbase. What it is: At the most basic level we are simply adding shared data extents to XFS - i.e. a single extent on disk can now have multiple owners. To do this we have to add new on-disk features to both track the shared extents and the number of times they've been shared. This is done by the new "refcount" btree that sits in every allocation group. When we share or unshare an extent, this tree gets updated. Along with this new tree, the reverse mapping tree needs to be updated to track each owner or a shared extent. This also needs to be updated ever share/unshare operation. These interactions at extent allocation and freeing time have complex ordering and recovery constraints, so there's a significant amount of new intent-based transaction code to ensure that operations are performed atomically from both the runtime and integrity/crash recovery perspectives. We also need to break sharing when writes hit a shared extent - this is where the new copy-on-write implementation comes in. We allocate new storage and copy the original data along with the overwrite data into the new location. We only do this for data as we don't share metadata at all - each inode has it's own metadata that tracks the shared data extents, the extents undergoing CoW and it's own private extents. Of course, being XFS, nothing is simple - we use delayed allocation for CoW similar to how we use it for normal writes. ENOSPC is a significant issue here - we build on the reservation code added in 4.8-rc1 with the reverse mapping feature to ensure we don't get spurious ENOSPC issues part way through a CoW operation. These mechanisms also help minimise fragmentation due to repeated CoW operations. To further reduce fragmentation overhead, we've also introduced a CoW extent size hint, which indicates how large a region we should allocate when we execute a CoW operation. With all this functionality in place, we can hook up .copy_file_range, .clone_file_range and .dedupe_file_range and we gain all the capabilities of reflink and other vfs provided functionality that enable manipulation to shared extents. We also added a fallocate mode that explicitly unshares a range of a file, which we implemented as an explicit CoW of all the shared extents in a file. As such, it's a huge chunk of new functionality with new on-disk format features and internal infrastructure. It warns at mount time as an experimental feature and that it may eat data (as we do with all new on-disk features until they stabilise). We have not released userspace suport for it yet - userspace support currently requires download from Darrick's xfsprogs repo and build from source, so the access to this feature is really developer/tester only at this point. Initial userspace support will be released at the same time the kernel with this code in it is released. The new code causes 5-6 new failures with xfstests - these aren't serious functional failures but things the output of tests changing slightly due to perturbations in layouts, space usage, etc. OTOH, we've added 150+ new tests to xfstests that specifically exercise this new functionality so it's got far better test coverage than any functionality we've previously added to XFS. Darrick has done a pretty amazing job getting us to this stage, and special mention also needs to go to Christoph (review, testing, improvements and bug fixes) and Brian (caught several intricate bugs during review) for the effort they've also put in. Summary: - unshare range (FALLOC_FL_UNSHARE) support for fallocate - copy-on-write extent size hints (FS_XFLAG_COWEXTSIZE) for fsxattr interface - shared extent support for XFS - copy-on-write support for shared extents - copy_file_range support - clone_file_range support (implements reflink) - dedupe_file_range support - defrag support for reverse mapping enabled filesystems" * tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (71 commits) xfs: convert COW blocks to real blocks before unwritten extent conversion xfs: rework refcount cow recovery error handling xfs: clear reflink flag if setting realtime flag xfs: fix error initialization xfs: fix label inaccuracies xfs: remove isize check from unshare operation xfs: reduce stack usage of _reflink_clear_inode_flag xfs: check inode reflink flag before calling reflink functions xfs: implement swapext for rmap filesystems xfs: refactor swapext code xfs: various swapext cleanups xfs: recognize the reflink feature bit xfs: simulate per-AG reservations being critically low xfs: don't mix reflink and DAX mode for now xfs: check for invalid inode reflink flags xfs: set a default CoW extent size of 32 blocks xfs: convert unwritten status of reverse mappings for shared files xfs: use interval query for rmap alloc operations on shared files xfs: add shared rmap map/unmap/convert log item types xfs: increase log reservations for reflink ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
PCI changes for the v4.9 merge window: "Here are some more changes I'd like to have in v4.9. There's one small Tegra bug fix in the PHY poweroff path, which is only used in failure paths. The rest is all strictly cleanup that should make host bridge drivers more readable, but shouldn't actually change any behavior. Summary: - use local struct device pointers in many host bridge drivers for clarity - remove unused platform data - use generic DesignWare accessors - misc cleanups: remove redundant structure entries and re-order structure members to put comon generic fields first etc" * tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer PCI: rockchip: Indent "if" statement body PCI: hisi: Reorder struct hisi_pcie PCI: hisi: Pass device-specific struct to internal functions PCI: hisi: Include register block base in PCIE_SYS_STATE4 address PCI: dra7xx: Reorder struct dra7xx_pcie PCI: xilinx-nwl: Remove unused platform data PCI: xilinx-nwl: Add local struct device pointers PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument PCI: xilinx: Remove unused platform data PCI: xilinx: Add local struct device pointers PCI: xgene: Add register accessors PCI: xgene: Pass struct xgene_pcie_port to setup functions PCI: xgene: Remove unused platform data PCI: tegra: Remove unused platform data PCI: tegra: Add local struct device pointers PCI: tegra: Fix argument order in tegra_pcie_phy_disable() PCI: rockchip: Remove unused platform data PCI: rcar-gen2: Add local struct device pointers ...
-
由 Linus Torvalds 提交于
Merge tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform drivers updates from Darren Hart: "Cleanups, refactoring, and a couple bug fixes. intel_pmc_core: - avoid boot time warning for !CONFIG_DEBUGFS_FS intel_pmc_ipc: - Convert to use platform_device_register_full asus-wmi: - Filter buggy scan codes on ASUS Q500A toshiba_bluetooth: - Decouple an error checking status code toshiba_haps: - Change logging level from info to debug - Split ACPI and HDD protection error handling asus-laptop: - get rid of parse_arg() asus-wmi: - fix asus ux303ub brightness issue toshiba_acpi: - Fix typo in *_cooling_method_set function - Change error checking logic from TCI functions - Clean up variable declaration" * tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A platform/x86: toshiba_bluetooth: Decouple an error checking status code platform/x86: toshiba_haps: Change logging level from info to debug platform/x86: toshiba_haps: Split ACPI and HDD protection error handling platform/x86: asus-laptop: get rid of parse_arg() platform/x86: asus-wmi: fix asus ux303ub brightness issue platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function platform/x86: toshiba_acpi: Change error checking logic from TCI functions platform/x86: toshiba_acpi: Clean up variable declaration
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog updates from Wim Van Sebroeck: - a new watchdog pretimeout governor framework - support to upload the firmware on the ziirave_wdt - several fixes and cleanups * git://www.linux-watchdog.org/linux-watchdog: (26 commits) watchdog: imx2_wdt: add pretimeout function support watchdog: softdog: implement pretimeout support watchdog: pretimeout: add pretimeout_available_governors attribute watchdog: pretimeout: add option to select a pretimeout governor in runtime watchdog: pretimeout: add panic pretimeout governor watchdog: pretimeout: add noop pretimeout governor watchdog: add watchdog pretimeout governor framework watchdog: hpwdt: add support for iLO5 fs: compat_ioctl: add pretimeout functions for watchdogs watchdog: add pretimeout support to the core watchdog: imx2_wdt: use preferred BIT macro instead of open coded values watchdog: st_wdt: Remove support for obsolete platforms watchdog: bindings: Remove obsolete platforms from dt doc. watchdog: mt7621_wdt: Remove assignment of dev pointer watchdog: rt2880_wdt: Remove assignment of dev pointer watchdog: constify watchdog_ops structures watchdog: tegra: constify watchdog_ops structures watchdog: iTCO_wdt: constify iTCO_wdt_pm structure watchdog: cadence_wdt: Fix the suspend resume watchdog: txx9wdt: Add missing clock (un)prepare calls for CCF ...
-
由 Nikolay Aleksandrov 提交于
When I added the multicast flood control flag, I also added an attribute for it for sysfs similar to other flags, but I forgot to add it to brport_attrs. Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag") Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
The dev parameter passed to __axienet_device_reset() is not used inside the function, so remove it. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Reviewed-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This is supposed to loop 1000 times and then give up. The problem is it's a post-op and after the loop we test if "loop" is zero when really it would be -1. Fix this by making it a pre-op. Fixes: 1b7c55c4 ("liquidio: CN23XX queue manipulation") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The "vf_vlan_info" struct ends with a 2 byte struct hole so we have to memset it to ensure that no stack information is revealed to user space. Fixes: 79aab093 ('net: Update API for VF vlan protocol 802.1ad support') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We should clear out the padding and unused struct members so that we don't expose stack information to userspace. Fixes: fdb3accc ('tipc: add the ability to get UDP options via netlink') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Commit e0d56fdd was a bit aggressive removing l3mdev calls in the IPv4 stack. If the fib_lookup fails we do not want to drop to make_route if the oif is an l3mdev device. Also reverts 19664c6a ("net: l3mdev: Remove netif_index_is_l3_master") which removed netif_index_is_l3_master. Fixes: e0d56fdd ("net: l3mdev: remove redundant calls") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
The phy_start() is used to indicate the PHY is now ready to do its work. The state is changed, normally to PHY_UP which means that both the MAC and the PHY are ready. If the phy driver is using polling, when the next poll happens, the state machine notices the PHY is now in PHY_UP, and kicks off auto-negotiation, if needed. If however, the PHY is using interrupts, there is no polling. The phy is stuck in PHY_UP until the next interrupt comes along. And there is no reason for the PHY to interrupt. Have phy_start() schedule the state machine to run, which both speeds up the polling use case, and makes the interrupt use case actually work. This problems exists whenever there is a state change which will not cause an interrupt. Trigger the state machine in these cases, e.g. phy_error(). Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Cc: Kyle Roeschley <kyle.roeschley@ni.com> Tested-by: NKyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2016 21 次提交
-
-
由 Eric Dumazet 提交于
Baozeng Ding reported following KASAN splat : BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8 Read of size 1 by task poc/25548 Call Trace: [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15 [< inline >] print_address_description /mm/kasan/report.c:204 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283 [< inline >] kasan_report /mm/kasan/report.c:303 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647 [< inline >] SYSC_getsockopt /net/socket.c:1776 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6 Memory state around the buggy address: ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff He also provided a syzkaller reproducer. Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB data that was moved at a different place in tcp_v6_rcv() This patch moves tcp_v6_restore_cb() up and calls it from tcp_v6_do_rcv() when np->pktoptions is set. Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NBaozeng Ding <sploving1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based upon v2 of Stephen's patch. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
Wiht the latest rework of the xen-netback driver, we get a warning on ARM about the types passed into min(): drivers/net/xen-netback/rx.c: In function 'xenvif_rx_next_chunk': include/linux/kernel.h:739:16: error: comparison of distinct pointer types lacks a cast [-Werror] The reason is that XEN_PAGE_SIZE is not size_t here. There is no actual bug, and we can easily avoid the warning using the min_t() macro instead of min(). Fixes: eb1723a2 ("xen-netback: refactor guest rx") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NPaul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch fixes a problem when propagated the failure of ptp_clock_register to open function. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
The gmac 4.x version has not extended descriptors (that are available on 3.x instead of). While initializing the PTP module, the advanced PTP was enabled in case of extended descriptors. This cannot be applied for 4.x version where only the hardware capability register has to show if the feature is present. Patch also adds some extra netdev_(debug/inof) to better dump the configuration. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ursula Braun says: ==================== s390 network driver patches here are 3 small patches for the s390 network drivers netiucv and lcs. They are built for the net-tree. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
There is a trailing white space at the end of a dev_err message that does nothing useful - remove it. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
High values are always wrong for netiucv's sysfs attribute "buffer". But the current code does not detect values between 2**31 and 2**32 as invalid. Choosing type "unsigned int" for variable "bs1" and making use of "kstrtouint()" improves the syntax checking for "buffer". Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Save a memcpy in netiucv_printuser(). Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The definition of qed_get_rdma_ops() is not a prototype unless we add 'void' here, as indicated by this W=1 warning: drivers/net/ethernet/qlogic/qed/qed_roce.c: In function ‘qed_get_rdma_ops’: drivers/net/ethernet/qlogic/qed/qed_roce.c:2950:28: error: old-style function definition [-Werror=old-style-definition] Fixes: abd49676 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch adds vlan and address to warning messages printed in the bridge fdb code for debuggability. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The software calculation of UDP checksum in Netvsc driver was only handling IPv4 case. By using skb_checksum_help() instead all protocols can be handled. Rearrange code to eliminate goto and look like other drivers. This is a temporary solution; recent versions of Window Server etc do support UDP checksum offload, just need to do the appropriate negotiation with host to validate before using. This will be done in later patch. Please queue this for -stable as well. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Krister reported a kernel NULL pointer dereference after tcf_action_init_1() invokes a_o->init(), it is a race condition where one thread calling tcf_register_action() to initialize the netns data after putting act ops in the global list and the other thread searching the list and then calling a_o->init(net, ...). Fix this by moving the pernet ops registration before making the action ops visible. This is fine because: a) we don't rely on act_base in pernet ops->init(), b) in the worst case we have a fully initialized netns but ops is still not ready so new actions still can't be created. Reported-by: NKrister Johansen <kjlx@templeofstupid.com> Tested-by: NKrister Johansen <kjlx@templeofstupid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
If a VIF has been ready for rx_stall_timeout (60s by default) and an Rx ring is drained of all requests an Rx stall will be incorrectly detected. When this occurs and the guest Rx queue is empty, the Rx ring's event index will not be set and the frontend will not raise an event when new requests are placed on the ring, permanently stalling the VIF. This is a regression introduced by eb1723a2 (xen-netback: refactor guest rx). Fix this by reinstating the setting of queue->last_rx_time when placing a packet onto the guest Rx ring. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NPaul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Tsyrklevich 提交于
The reserved field precise_offset->rsv is not cleared before being copied to user space, leaking kernel stack memory. Clear the struct before it's copied. Signed-off-by: NVlad Tsyrklevich <vlad@tsyrklevich.net> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
I am hitting this in mlx5: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function reclaim_pages_cmd.clone.0: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:346: error: call to __compiletime_assert_346 declared with attribute error: BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_out, pas[i]) % 64 drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function give_pages: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:291: error: call to __compiletime_assert_291 declared with attribute error: BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_in, pas[i]) % 64 Problem is that this is doing a BUILD_BUG_ON on a non-constant expression because of trying to take offset of pas[i] in the structure. Fix is to create MLX5_ARRAY_SET64 that takes an additional argument that is the field index to separate between BUILD_BUG_ON on the array constant field and the indexed field to assign the value to. There are two callers of MLX5_SET64 that are trying to get a variable offset, change those to call MLX5_ARRAY_SET64 passing 'pas' and 'i' as the arguments to use in the offset check and the indexed value assignment. Fixes: a533ed5e ("net/mlx5: Pages management commands via mlx5 ifc") Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
The Quectel EC21 and EC25 need the same "set DTR" request as devices based on the MDM9230 chipset, but has no USB3 support. Our best guess is that the "set DTR" functionality depends on chipset and/or baseband firmware generation. But USB3 is still an optional feature. Since we cannot enable this unconditionally for all older devices, and there doesn't appear to be anything we can use in the USB descriptors to identify these chips, we are forced to use a device specific quirk flag. Reported-and-tested-by: NSebastian Sjoholm <sebastian.sjoholm@gmail.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Benc says: ==================== openvswitch: vlan fixes Fix three issues introduced by the 802.1AD patchset. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
The internal device does support 802.1AD offloading since 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes"). Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Acked-by: NEric Garver <e@erig.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
When the packet has its vlan tag in skb->vlan_tci, the length of the VLAN header is not counted in skb->len. It doesn't make sense to subtract it. Fixes: 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes") Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Acked-by: NEric Garver <e@erig.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
This code is called whenever flow key is being extracted from the packet. The packet may be as likely vlan tagged as not. Fixes: 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes") Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Acked-by: NEric Garver <e@erig.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-