Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 20 11月, 2014 3 次提交
    • O
      drm/i915/bdw: Pin the context backing objects to GGTT on-demand · dcb4c12a
      由 Oscar Mateo 提交于 
      Up until now, we have pinned every logical ring context backing object
during creation, and left it pinned until destruction. This made my life
easier, but it's a harmful thing to do, because we cause fragmentation
of the GGTT (and, eventually, we would run out of space).

This patch makes the pinning on-demand: the backing objects of the two
contexts that are written to the ELSP are pinned right before submission
and unpinned once the hardware is done with them. The only context that
is still pinned regardless is the global default one, so that the HWS can
still be accessed in the same way (ring->status_page).

v2: In the early version of this patch, we were pinning the context as
we put it into the ELSP: on the one hand, this is very efficient because
only a maximum two contexts are pinned at any given time, but on the other
hand, we cannot really pin in interrupt time :(

v3: Use a mutex rather than atomic_t to protect pin count to avoid races.
Do not unpin default context in free_request.

v4: Break out pin and unpin into functions.  Fix style problems reported
by checkpatch

v5: Remove unpin_lock as all pinning and unpinning is done with the struct
mutex already locked.  Add WARN_ONs to make sure this is the case in future.

Issue: VIZ-4277
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
Reviewed-by: NAkash Goel <akash.goels@gmail.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      dcb4c12a
    • T
      drm/i915/bdw: Clean up execlist queue items in retire_work · c86ee3a9
      由 Thomas Daniel 提交于 
      No longer create a work item to clean each execlist queue item.
Instead, move retired execlist requests to a queue and clean up the
items during retire_requests.

v2: Fix legacy ring path broken during overzealous cleanup

v3: Update idle detection to take execlists queue into account

v4: Grab execlist lock when checking queue state

v5: Fix leaking requests by freeing in execlists_retire_requests.

Issue: VIZ-4274
Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NAkash Goel <akash.goels@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      c86ee3a9
    • D
      Merge tag 'drm-intel-fixes-2014-11-19' into drm-intel-next-queued · 54499b2a
      由 Daniel Vetter 提交于 
      So with all the code movement and extraction in intel_pm.c in -next
git is hopelessly confused with

commit 2208d655
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Nov 14 09:25:29 2014 +0100

    drm/i915: drop WaSetupGtModeTdRowDispatch:snb

from -fixes. Worse even small changes in -next move around the
conflict context so rerere is equally useless. Let's just backmerge
and be done with it.

Conflicts:
	drivers/gpu/drm/i915/i915_drv.c
	drivers/gpu/drm/i915/intel_pm.c

Except for git getting lost no tricky conflicts really.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
      54499b2a
  3. 19 11月, 2014 10 次提交
    • I
      drm/i915: disable rps irqs earlier during suspend/unload · 2eb5252e
      由 Imre Deak 提交于 
      After the previous patch RPS disabling doesn't depend any more on the
first level interrupts being disabled, so we can move it everywhere
earlier. Doing so let's us think about the uninitialization steps
afterwards independently of any asynchronous RPS events that can happen
atm. It also makes the system/runtime suspend time RPS disabling more
uniform. Finally this gets rid of the WARN in
intel_suspend_gt_powersave(), which we can hit if a final RPS work runs
after we disabled the first level interrupts.

Testcase: igt/pm_rpm
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=82939Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      2eb5252e
    • I
      drm/i915: sanitize rps irq disabling · d4d70aa5
      由 Imre Deak 提交于 
      When disabling the RPS interrupts there is a tricky dependency between
the thread disabling the interrupts, the RPS interrupt handler and the
corresponding RPS work. The RPS work can reenable the interrupts, so
there is no straightforward order in the disabling thread to (1) make
sure that any RPS work is flushed and to (2) disable all RPS
interrupts. Currently this is solved by masking the interrupts using two
separate mask registers (first level display IMR and PM IMR) and doing
the disabling when all first level interrupts are disabled.

This works, but the requirement to run with all first level interrupts
disabled is unnecessary making the suspend / unload time ordering of RPS
disabling wrt. other unitialization steps difficult and error prone.
Removing this restriction allows us to disable RPS early during suspend
/ unload and forget about it for the rest of the sequence. By adding a
more explicit method for avoiding the above race, it also becomes easier
to prove its correctness. Finally currently we can hit the WARN in
snb_update_pm_irq(), when a final RPS work runs with the first level
interrupts already disabled. This won't lead to any problem (due to the
separate interrupt masks), but with the change in this and the next
patch we can get rid of the WARN, while leaving it in place for other
scenarios.

To address the above points, add a new RPS interrupts_enabled flag and
use this during RPS disabling to avoid requeuing the RPS work and
reenabling of the RPS interrupts. Since the interrupt disabling happens
now in intel_suspend_gt_powersave(), we will disable RPS interrupts
explicitly during suspend (and not just through the first level mask),
but there is no problem doing so, it's also more consistent and allows
us to unify more of the RPS disabling during suspend and unload time in
the next patch.

v2/v3:
- rebase on patch "drm/i915: move rps irq disable one level up" in the
  patchset
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      d4d70aa5
    • I
      drm/i915: sanitize rps irq enabling · 3cc134e3
      由 Imre Deak 提交于 
      Atm we first enable the RPS interrupts then we clear any pending ones.
By this we could lose an interrupt arriving after we unmasked it. This
may not be a problem as the caller should handle such a race, but logic
still calls for the opposite order. Also we can delay enabling the
interrupts until after all the RPS initialization is ready with the
following order:

1. disable left-over RPS (earlier via intel_uncore_sanitize)
2. clear any pending RPS interrupts
3. initialize RPS
4. enable RPS interrupts

This also allows us to do the 2. and 4. step the same way for all
platforms, so let's follow this order to simplifying things.

Also make sure any queued interrupts are also cleared.

v2:
- rebase on the GEN9 patches where we don't support RPS yet, so we
  musn't enable RPS interrupts on it (Paulo)
v3:
- avoid enabling RPS interrupts on GEN>9 too (Paulo)
- clarify the RPS init sequence in the log message (Chris)
- add POSTING_READ to gen6_reset_rps_interrupts() (Paulo)
- WARN if any PM_IIR bits are set in gen6_enable_rps_interrupts()
  (Paulo)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      3cc134e3
    • I
      drm/i915: move rps irq disable one level up · e534770a
      由 Imre Deak 提交于 
      We disable the RPS interrupts for all platforms at the same spot, so
move it one level up in the callstack to simplify things.

No functional change.

v2:
- rebase on the GEN9 patches where RPS isn't supported yet, so we don't
  need to disable RPS interrupts on it (Paulo)
v3:
- avoid disabling the interrupts on GEN>9 too (Paulo)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      e534770a
    • I
      drm/i915: WARN if we receive any rps interrupts on gen>9 · 4a74de82
      由 Imre Deak 提交于 
      This extends

commit 132f3f17
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Nov 10 15:34:33 2014 +0200

    drm/i915: WARN if we receive any gen9 rps interrupts

to GEN>9 platforms as suggested by Paulo.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      4a74de82
    • M
      drm/i915: Don't store panning coordinates as 16.16 fixed point · 9dc806fc
      由 Matt Roper 提交于 
      When using the universal plane interface, the source rectangle
coordinates define the panning offset for the primary plane, which needs
to be stored in crtc->{x,y}.  The original universal plane code
negelected to set these panning offset fields, which was partially
remedied in:

        commit ccc759dc
        Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
        Date:   Wed Sep 24 14:20:22 2014 -0300

            drm/i915: Merge of visible and !visible paths for primary planes

However the plane source coordinates are provided in 16.16 fixed point
format and the above commit forgot to convert back to integer
coordinates before saving the values.  When we replace
intel_pipe_set_base() with plane->funcs->update_plane() in a future
patch, this bug becomes visible via the set_config entrypoint as well as
update_plane.

Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Testcase: igt/kms_plane
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      9dc806fc
    • J
      drm/i915/ddi: set has_infoframe flag on DDI too v2 · f061b9be
      由 Jesse Barnes 提交于 
      Just like we do in the HDMI code, set the infoframe flag if we detect
that infoframes are enabled.

v2: check for actual infoframe status as in hdmi code (Daniel)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      f061b9be
    • T
      drm/i915: Extend pcode mailbox interface · 151a49d0
      由 Tom O'Rourke 提交于 
      In sandybridge_pcode_read and sandybridge_pcode_write,
extend the mbox parameter from u8 to u32.

On Haswell and Sandybridge, bits 7:0 encode the mailbox
command and bits 28:8 are used for address control for
specific commands.

Based on suggestion from Ville Syrjälä.
Signed-off-by: NTom O'Rourke <Tom.O'Rourke@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      151a49d0
    • D
      drm/i915: Tune down sink crc timeout dmesg output · 90bd1f46
      由 Daniel Vetter 提交于 
      For whatever reasons this can happen. For real testcases the test will
notice the -EIO and fall over, but we also have some testcases that
just read all debugfs files. And that shouldn't cause dmesg spam.

So tune it down a bit so that we still have the information for
debugging. And change the errno so that real testcases can easily
differentiate.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84890Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
      90bd1f46
    • C
      drm/i915: Don't continually defer the hangcheck · 672e7b7c
      由 Chris Wilson 提交于 
      With multiple rings, we may continue to render on the blitter whilst
executing an infinite shader on the render ring. As we currently, rearm
the timer with each execbuf, in this scenario the hangcheck will never
fire and we will never detect the lockup on the render ring. Instead,
only arm the timer once per hangcheck, so that hangcheck runs more
frequently.

v2: Rearrange code to avoid triggering a BUG_ON in add_timer from
softirq context.

Testcase: igt/gem_reset_stats/defer-hangcheck*
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86225Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      672e7b7c
  5. 18 11月, 2014 12 次提交
  7. 17 11月, 2014 15 次提交