- 11 1月, 2017 2 次提交
-
-
由 Tobias Klauser 提交于
Make sockfs_setattr() static as it is not used outside of net/socket.c This fixes the following GCC warning: net/socket.c:534:5: warning: no previous prototype for ‘sockfs_setattr’ [-Wmissing-prototypes] Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2017-01-10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Only two fixes at this time. The rtlwifi fix is an important one as it fixes a reported oops and Linus was already asking about it. The orinoco fix is not tested on a real device, because it's old legacy hardware and hardly no-one use it, but it should fix a (theoretical) issue with VMAP_STACK. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 1月, 2017 7 次提交
-
-
由 Eric Dumazet 提交于
After commit 1fb6f159 ("tcp: add tcp_conn_request"), tcp_peer_is_proven() no longer needs to be exported. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
As I understand it the Meson GXL PHY driver is only useful on one architecture so only make it visible on that architecture. Signed-off-by: NJean Delvare <jdelvare@suse.de> Fixes: 7334b3e4 ("net: phy: Add Meson GXL Internal PHY driver") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Tsyrklevich 提交于
ipddp_route structs contain alignment padding so kernel heap memory is leaked when they are copied to user space in ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear that memory. Signed-off-by: NVlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Tikhomirov 提交于
> cat /proc/sys/net/ipv4/tcp_notsent_lowat -1 > echo 4294967295 > /proc/sys/net/ipv4/tcp_notsent_lowat -bash: echo: write error: Invalid argument > echo -2147483648 > /proc/sys/net/ipv4/tcp_notsent_lowat > cat /proc/sys/net/ipv4/tcp_notsent_lowat -2147483648 but in documentation we have "tcp_notsent_lowat - UNSIGNED INTEGER" v2: simplify to just proc_douintvec Signed-off-by: NPavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Alemayhu 提交于
o s/approriate/appropriate o s/discouvery/discovery Signed-off-by: NAlexander Alemayhu <alexander@alemayhu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zefir Kurtisi 提交于
While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: NZefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso. 2) Fix out of bounds access in nf_tables discovered by KASAN, from Florian Westphal. 3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko. 4) Fix unicast filtering in be2net driver, from Ivan Vecera. 5) tg3_get_stats64() can race with driver close and ethtool reconfigurations, fix from Michael Chan. 6) Fix error handling when pass limit is reached in bpf code gen on x86. From Daniel Borkmann. 7) Don't clobber switch ops and use proper MDIO nested reads and writes in bcm_sf2 driver, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) net: dsa: bcm_sf2: Utilize nested MDIO read/write net: dsa: bcm_sf2: Do not clobber b53_switch_ops net: stmmac: fix maxmtu assignment to be within valid range bpf: change back to orig prog on too many passes tg3: Fix race condition in tg3_get_stats64(). be2net: fix unicast list filling be2net: fix accesses to unicast list netlabel: add CALIPSO to the list of built-in protocols vti6: fix device register to report IFLA_INFO_KIND net: phy: dp83867: fix irq generation amd-xgbe: Fix IRQ processing when running in single IRQ mode sh_eth: R8A7740 supports packet shecksumming sh_eth: fix EESIPR values for SH77{34|63} r8169: fix the typo in the comment nl80211: fix sched scan netlink socket owner destruction bridge: netfilter: Fix dropping packets that moving through bridge interface netfilter: ipt_CLUSTERIP: check duplicate config when initializing netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set netfilter: nf_tables: fix oob access netfilter: nft_queue: use raw_smp_processor_id() ...
-
- 09 1月, 2017 9 次提交
-
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple fixes Here are a couple of fixes for bcm_sf2, please queue these up for -stable as well, thank you very much! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We are implementing a MDIO bus which is behind another one, so use the nested version of the accessors to get lockdep annotations correct. Fixes: 461cd1b0 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We make the bcm_sf2 driver override ds->ops which points to b53_switch_ops since b53_switch_alloc() did the assignent. This is all well and good until a second b53 switch comes in, and ends up using the bcm_sf2 operations. Make a proper local copy, substitute the ds->ops pointer and then override the operations. Fixes: f458995b ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kweh, Hock Leong 提交于
There is no checking valid value of maxmtu when getting it from device tree. This resolution added the checking condition to ensure the assignment is made within a valid range. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Daniel Borkmann 提交于
If after too many passes still no image could be emitted, then swap back to the original program as we do in all other cases and don't use the one with blinding. Fixes: 959a7579 ("bpf, x86: add support for constant blinding") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an artifact of the holiday break I think. Lots of gadget and the usual XHCI fixups for reported issues (one day that driver will calm down...) Also included are a bunch of usb-serial driver fixes, and for good measure, a number of much-reported MUSB driver issues have finally been resolved. All of these have been in linux-next with no reported issues" * tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits) USB: fix problems with duplicate endpoint addresses usb: ohci-at91: use descriptor-based gpio APIs correctly usb: storage: unusual_uas: Add JMicron JMS56x to unusual device usb: hub: Move hub_port_disable() to fix warning if PM is disabled usb: musb: blackfin: add bfin_fifo_offset in bfin_ops usb: musb: fix compilation warning on unused function usb: musb: Fix trying to free already-free IRQ 4 usb: musb: dsps: implement clear_ep_rxintr() callback usb: musb: core: add clear_ep_rxintr() to musb_platform_ops USB: serial: ti_usb_3410_5052: fix NULL-deref at open USB: serial: spcp8x5: fix NULL-deref at open USB: serial: quatech2: fix sleep-while-atomic in close USB: serial: pl2303: fix NULL-deref at open USB: serial: oti6858: fix NULL-deref at open USB: serial: omninet: fix NULL-derefs at open and disconnect USB: serial: mos7840: fix misleading interrupt-URB comment USB: serial: mos7840: remove unused write URB USB: serial: mos7840: fix NULL-deref at open USB: serial: mos7720: remove obsolete port initialisation USB: serial: mos7720: fix parallel probe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.10-rc3. Two MEI driver fixes, and three NVMEM patches for reported issues, and a new Hyper-V driver MAINTAINER update. Nothing major at all, all have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: hyper-v: Add myself as additional MAINTAINER nvmem: fix nvmem_cell_read() return type doc nvmem: imx-ocotp: Fix wrong register size nvmem: qfprom: Allow single byte accesses for read/write mei: move write cb to completion on credentials failures mei: bus: fix mei_cldev_enable KDoc
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging/IIO fixes from Greg KH: "Here are some staging and IIO driver fixes for 4.10-rc3. Most of these are minor IIO fixes of reported issues, along with one network driver fix to resolve an issue. And a MAINTAINERS update with a new mailing list. All of these, except the MAINTAINERS file update, have been in linux-next with no reported issues (the MAINTAINERS patch happened on Friday...)" * tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: add greybus subsystem mailing list staging: octeon: Call SET_NETDEV_DEV() iio: accel: st_accel: fix LIS3LV02 reading and scaling iio: common: st_sensors: fix channel data parsing iio: max44000: correct value in illuminance_integration_time_available iio: adc: TI_AM335X_ADC should depend on HAS_DMA iio: bmi160: Fix time needed to sleep after command execution iio: 104-quad-8: Fix active level mismatch for the preset enable option iio: 104-quad-8: Fix off-by-one errors when addressing IOR iio: 104-quad-8: Fix index control configuration
-
- 08 1月, 2017 6 次提交
-
-
由 Michael Chan 提交于
The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b7172414 be2net: replace polling with sleeping in the FW completion path Signed-off-by: NIvan Vecera <cera@cera.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Weiner 提交于
Several people report seeing warnings about inconsistent radix tree nodes followed by crashes in the workingset code, which all looked like use-after-free access from the shadow node shrinker. Dave Jones managed to reproduce the issue with a debug patch applied, which confirmed that the radix tree shrinking indeed frees shadow nodes while they are still linked to the shadow LRU: WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200 CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3 Call Trace: delete_node+0x1e4/0x200 __radix_tree_delete_node+0xd/0x10 shadow_lru_isolate+0xe6/0x220 __list_lru_walk_one.isra.4+0x9b/0x190 list_lru_walk_one+0x23/0x30 scan_shadow_nodes+0x2e/0x40 shrink_slab.part.44+0x23d/0x5d0 shrink_node+0x22c/0x330 kswapd+0x392/0x8f0 This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the inlined radix_tree_shrink(). The problem is with 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking"), which passes an update callback into the radix tree to link and unlink shadow leaf nodes when tree entries change, but forgot to pass the callback when reclaiming a shadow node. While the reclaimed shadow node itself is unlinked by the shrinker, its deletion from the tree can cause the left-most leaf node in the tree to be shrunk. If that happens to be a shadow node as well, we don't unlink it from the LRU as we should. Consider this tree, where the s are shadow entries: root->rnode | [0 n] | | [s ] [sssss] Now the shadow node shrinker reclaims the rightmost leaf node through the shadow node LRU: root->rnode | [0 ] | [s ] Because the parent of the deleted node is the first level below the root and has only one child in the left-most slot, the intermediate level is shrunk and the node containing the single shadow is put in its place: root->rnode | [s ] The shrinker again sees a single left-most slot in a first level node and thus decides to store the shadow in root->rnode directly and free the node - which is a leaf node on the shadow node LRU. root->rnode | s Without the update callback, the freed node remains on the shadow LRU, where it causes later shrinker runs to crash. Pass the node updater callback into __radix_tree_delete_node() in case the deletion causes the left-most branch in the tree to collapse too. Also add warnings when linked nodes are freed right away, rather than wait for the use-after-free when the list is scanned much later. Fixes: 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking") Reported-by: NDave Chinner <david@fromorbit.com> Reported-by: NHugh Dickins <hughd@google.com> Reported-by: NAndrea Arcangeli <aarcange@redhat.com> Reported-and-tested-by: NDave Jones <davej@codemonkey.org.uk> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Leech <cleech@redhat.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
4.10-rc loadtest (even on x86, and even without THPCache) fails with "fork: Cannot allocate memory" or some such; and /proc/meminfo shows PageTables growing. Commit 953c66c2 ("mm: THP page cache support for ppc64") that got merged in rc1 removed the freeing of an unused preallocated pagetable after do_fault_around() has called map_pages(). This is usually a good optimization, so that the followup doesn't have to reallocate one; but it's not sufficient to shift the freeing into alloc_set_pte(), since there are failure cases (most commonly VM_FAULT_RETRY) which never reach finish_fault(). Check and free it at the outer level in do_fault(), then we don't need to worry in alloc_set_pte(), and can restore that to how it was (I cannot find any reason to pte_free() under lock as it was doing). And fix a separate pagetable leak, or crash, introduced by the same change, that could only show up on some ppc64: why does do_set_pmd()'s failure case attempt to withdraw a pagetable when it never deposited one, at the same time overwriting (so leaking) the vmf->prealloc_pte? Residue of an earlier implementation, perhaps? Delete it. Fixes: 953c66c2 ("mm: THP page cache support for ppc64") Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild fix from Michal Marek: "The asm-prototypes.h file added in the last merge window results in invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms segfaults. This pull request fixes the header, the genksyms fix is in my kbuild branch for 4.11" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: asm-prototypes: Clear any CPP defines before declaring the functions
-
由 Greg Kroah-Hartman 提交于
The Greybus driver subsystem has a mailing list, so list it in the MAINTAINERS file so that people know to send patches there as well. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 1月, 2017 16 次提交
-
-
由 Ivan Vecera 提交于
Commit 988d44b1 "be2net: Avoid redundant addition of mac address in HW" introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly access adapter->uc_list as an array of bytes instead of an array of be_eth_addr. Consequently NIC is not filled with valid data so unicast filtering is broken. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 988d44b1 be2net: Avoid redundant addition of mac address in HW Signed-off-by: NIvan Vecera <cera@cera.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
When we added CALIPSO support in Linux v4.8 we forgot to add it to the list of supported protocols with display at boot. Signed-off-by: NPaul Moore <paul@paul-moore.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Nothing particular stands out, only a few small fixes for USB-audio, HD-audio and Firewire. The USB-audio fix is the respin of the previous race fix after a revert due to the regression" * tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: firewire-lib: change structure member with proper type" ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion ALSA: usb-audio: Fix irq/process data synchronization ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL ALSA: hda - Fix up GPIO for ASUS ROG Ranger ALSA: firewire-lib: change structure member with proper type ALSA: firewire-tascam: Fix to handle error from initialization of stream data ALSA: fireworks: fix asymmetric API call at unit removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders that don't turn all the clks on and another fix for stm32f4 SoCs where we have multiple drivers attaching to the same DT node" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method clk: renesas: mstp: Support 8-bit registers for r7s72100
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix temp1_max_alarm attribute in lm90 driver" * tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) fix temp1_max_alarm attribute
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "MIPS: - fix host kernel crashes when receiving a signal with 64-bit userspace - flush instruction cache on all vcpus after generating entry code (both for stable) x86: - fix NULL dereference in MMU caused by SMM transitions (for stable) - correct guest instruction pointer after emulating some VMX errors - minor cleanup" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: remove duplicated declaration KVM: MIPS: Flush KVM entry code from icache globally KVM: MIPS: Don't clobber CP0_Status.UX KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS KVM: nVMX: fix instruction skipping during emulated vm-entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - re-introduce the arm64 get_current() optimisation - KERN_CONT fallout fix in show_pte() * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: restore get_current() optimisation arm64: mm: fix show_pte KERN_CONT fallout
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2017-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Another single fix, to correctly handle destruction of a single netlink socket having ownership of multiple objects (scheduled scan requests and interfaces.) ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Forster 提交于
vti6 interface is registered before the rtnl_link_ops block is attached. As a result the resulting RTM_NEWLINK is missing IFLA_INFO_KIND. Re-order attachment of rtnl_link_ops block to fix. Signed-off-by: NDave Forster <dforster@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Grygorii Strashko 提交于
For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be programmed as an interrupt output instead of a Powerdown input in Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The current driver doesn't do this and as result IRQs will not be generated by DP83867 phy even if they are properly configured in DT. Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867 driver will work properly in interrupt enabled mode. Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
When running in single IRQ mode, the additional IRQ routines were being skipped because only the XGMAC interrupt status was being checked. Update the code so that the additional IRQ routines are checked whenever an interrupt is received. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The R8A7740 GEther controller supports the packet checksum offloading but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740 data, thus CSMR isn't cleared... Fixes: 73a0d907 ("net: sh_eth: add support R8A7740") Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
As the SH77{34|63} manuals are freely available, I've checked the EESIPR values written against the manuals, and they appeared to set the reserved bits 11-15 (which should be 0 on write). Fix those EESIPR values. Fixes: 380af9e3 ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data"") Fixes: f5d12767 ("sh_eth: get SH77{34|63} support out of #ifdef") Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fixes from Alex Williamson: - Add mtty sample driver properly into build system (Alex Williamson) - Restore type1 mapping performance after mdev (Alex Williamson) - Fix mdev device race (Alex Williamson) - Cleanups to the mdev ABI used by vendor drivers (Alex Williamson) - Build fix for old compilers (Arnd Bergmann) - Fix sample driver error path (Dan Carpenter) - Handle pci_iomap() error (Arvind Yadav) - Fix mdev ioctl return type (Paul Gortmaker) * tag 'vfio-v4.10-rc3' of git://github.com/awilliam/linux-vfio: vfio-mdev: fix non-standard ioctl return val causing i386 build fail vfio-pci: Handle error from pci_iomap vfio-mdev: fix some error codes in the sample code vfio-pci: use 32-bit comparisons for register address for gcc-4.5 vfio-mdev: Make mdev_device private and abstract interfaces vfio-mdev: Make mdev_parent private vfio-mdev: de-polute the namespace, rename parent_device & parent_ops vfio-mdev: Fix remove race vfio/type1: Restore mapping performance with mdev support vfio-mdev: Fix mtty sample driver building
-
由 Linus Torvalds 提交于
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fixes from Konrad Rzeszutek Wilk: "This has one fix to make i915 work when using Xen SWIOTLB, and a feature from Geert to aid in debugging of devices that can't do DMA outside the 32-bit address space. The feature from Geert is on top of v4.10 merge window commit (specifically you pulling my previous branch), as his changes were dependent on the Documentation/ movement patches. I figured it would just easier than me trying than to cherry-pick the Documentation patches to satisfy git. The patches have been soaking since 12/20, albeit I updated the last patch due to linux-next catching an compiler error and adding an Tested-and-Reported-by tag" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Export swiotlb_max_segment to users swiotlb: Add swiotlb=noforce debug option swiotlb: Convert swiotlb_force from int to enum x86, swiotlb: Simplify pci_swiotlb_detect_override()
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from Joerg Roedel: "Three fixes queued up: - fix an issue with command buffer overflow handling in the AMD IOMMU driver - add an additional context entry flush to the Intel VT-d driver to make sure any old context entry from kdump copying is flushed out of the cache - correct the encoding of the PASID table size in the Intel VT-d driver" * tag 'iommu-fixes-v4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix the left value check of cmd buffer iommu/vt-d: Fix pasid table size encoding iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped
-