- 02 5月, 2013 25 次提交
-
-
由 Alex Elder 提交于
One of the first things ceph_osdc_start_request() does is register the request. It then acquires the osd client's map semaphore and request mutex and proceeds to map and send the request. There is no reason the request has to be registered before acquiring the map semaphore. So hold off doing so until after the map semaphore is held. Since register_request() is nothing more than a wrapper around __register_request(), call the latter function instead, after acquiring the request mutex. That leaves register_request() unused, so get rid of it. This partially resolves: http://tracker.ceph.com/issues/4392Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-off-by: NSage Weil <sage@inktank.com>
-
由 Sage Weil 提交于
Use wrapper functions that check whether the auth op exists so that callers do not need a bunch of conditional checks. Simplifies the external interface. Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NAlex Elder <elder@inktank.com>
-
由 Sage Weil 提交于
Currently the messenger calls out to a get_authorizer con op, which will create a new authorizer if it doesn't yet have one. In the meantime, when we rotate our service keys, the authorizer doesn't get updated. Eventually it will be rejected by the server on a new connection attempt and get invalidated, and we will then rebuild a new authorizer, but this is not ideal. Instead, if we do have an authorizer, call a new update_authorizer op that will verify that the current authorizer is using the latest secret. If it is not, we will build a new one that does. This avoids the transient failure. This fixes one of the sorry sequence of events for bug http://tracker.ceph.com/issues/4282Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NAlex Elder <elder@inktank.com>
-
由 Alex Elder 提交于
The osd trail is a pagelist, used only for a CALL osd operation to hold the class and method names, along with any input data for the call. It is only currently used by the rbd client, and when it's used it is the only bit of outbound data in the osd request. Since we already support (non-trail) pagelist data in a message, we can just save this outbound CALL data in the "normal" pagelist rather than the trail, and get rid of the trail entirely. The existing pagelist support depends on the pagelist being dynamically allocated, and ownership of it is passed to the messenger once it's been attached to a message. (That is to say, the messenger releases and frees the pagelist when it's done with it). That means we need to dynamically allocate the pagelist also. Note that we simply assert that the allocation of a pagelist structure succeeds. Appending to a pagelist might require a dynamic allocation, so we're already assuming we won't run into trouble doing so (we're just ignore any failures--and that should be fixed at some point). This resolves: http://tracker.ceph.com/issues/4407Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Add support for recording a ceph pagelist as data associated with an osd request. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
The length of outgoing data in an osd request is dependent on the osd ops that are embedded in that request. Each op is encoded into a request message using osd_req_encode_op(), so that should be used to determine the amount of outgoing data implied by the op as it is encoded. Have osd_req_encode_op() return the number of bytes of outgoing data implied by the op being encoded, and accumulate and use that in ceph_osdc_build_request(). As a result, ceph_osdc_build_request() no longer requires its "len" parameter, so get rid of it. Using the sum of the op lengths rather than the length provided is a valid change because: - The only callers of osd ceph_osdc_build_request() are rbd and the osd client (in ceph_osdc_new_request() on behalf of the file system). - When rbd calls it, the length provided is only non-zero for write requests, and in that case the single op has the same length value as what was passed here. - When called from ceph_osdc_new_request(), (it's not all that easy to see, but) the length passed is also always the same as the extent length encoded in its (single) write op if present. This resolves: http://tracker.ceph.com/issues/4406Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
When an incoming message is destined for the osd client, the messenger calls the osd client's alloc_msg method. That function looks up which request has the tid matching the incoming message, and returns the request message that was preallocated to receive the response. The response message is therefore known before the request is even started. Between the start of the request and the receipt of the response, the request and its data fields will not change, so there's no reason we need to hold off setting them. In fact it's preferable to set them just once because it's more obvious that they're unchanging. So set up the fields describing where incoming data is to land in a response message at the beginning of ceph_osdc_start_request(). Define a helper function that sets these fields, and use it to set the fields for both outgoing data in the request message and incoming data in the response. This resolves: http://tracker.ceph.com/issues/4284Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Change it so we only assign outgoing data information for messages if there is outgoing data to send. This then allows us to add a few more (currently commented-out) assertions. This is related to: http://tracker.ceph.com/issues/4284Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NGreg Farnum <greg@inktank.com>
-
由 Alex Elder 提交于
Define ceph_msg_data_set_pagelist(), ceph_msg_data_set_bio(), and ceph_msg_data_set_trail() to clearly abstract the assignment of the remaining data-related fields in a ceph message structure. Use the new functions in the osd client and mds client. This partially resolves: http://tracker.ceph.com/issues/4263Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
When setting page array information for message data, provide the byte length rather than the page count ceph_msg_data_set_pages(). Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Define a function ceph_msg_data_set_pages(), which more clearly abstracts the assignment page-related fields for data in a ceph message structure. Use this new function in the osd client and mds client. Ideally, these fields would never be set more than once (with BUG_ON() calls to guarantee that). At the moment though the osd client sets these every time it receives a message, and in the event of a communication problem this can happen more than once. (This will be resolved shortly, but setting up these helpers first makes it all a bit easier to work with.) Rearrange the field order in a ceph_msg structure to group those that are used to define the possible data payloads. This partially resolves: http://tracker.ceph.com/issues/4263Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Record the byte count for an osd request rather than the page count. The number of pages can always be derived from the byte count (and alignment/offset) but the reverse is not true. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
An osd request defines information about where data to be read should be placed as well as where data to write comes from. Currently these are represented by common fields. Keep information about data for writing separate from data to be read by splitting these into data_in and data_out fields. This is the key patch in this whole series, in that it actually identifies which osd requests generate outgoing data and which generate incoming data. It's less obvious (currently) that an osd CALL op generates both outgoing and incoming data; that's the focus of some upcoming work. This resolves: http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
An osd request uses either pages or a bio list for its data. Use a union to record information about the two, and add a data type tag to select between them. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Pull the fields in an osd request structure that define the data for the request out into a separate structure. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Currently ceph_osdc_new_request() assigns an osd request's r_num_pages and r_alignment fields. The only thing it does after that is call ceph_osdc_build_request(), and that doesn't need those fields to be assigned. Move the assignment of those fields out of ceph_osdc_new_request() and into its caller. As a result, the page_align parameter is no longer used, so get rid of it. Note that in ceph_sync_write(), the value for req->r_num_pages had already been calculated earlier (as num_pages, and fortunately it was computed the same way). So don't bother recomputing it, but because it's not needed earlier, move that calculation after the call to ceph_osdc_new_request(). Hold off making the assignment to r_alignment, doing it instead r_pages and r_num_pages are getting set. Similarly, in start_read(), nr_pages already holds the number of pages in the array (and is calculated the same way), so there's no need to recompute it. Move the assignment of the page alignment down with the others there as well. This and the next few patches are preparation work for: http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
The purpose of ceph_calc_object_layout() is to fill in the pool number and seed for a ceph_pg structure provided, based on a given osd map and target object id. Currently that function takes a file layout parameter, but the only thing used out of that is its pool number. Change the function so it takes a pool number rather than the full file layout structure. Only update the ceph_pg if the pool is found in the osd map. Get rid of few useless lines of code from the function while there. Since the function now very clearly just fills in the ceph_pg structure it's provided, rename it ceph_calc_ceph_pg(). Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
The new cases added to osd_req_encode_op() caused a new sparse error, which highlighted an existing problem that had been overlooked since it was originally checked in. When an unsupported opcode is found the destination rather than the source opcode was being used in the error message. The two differ in their byte order, and we want to be using the one in the source. Fix the problem in both spots. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
An osd request marked to linger will be re-submitted in the event a connection to the target osd gets dropped. Currently, if there is a callback function associated with a request it will be called each time a request is submitted--which for lingering requests can be more than once. Change it so a request--including lingering ones--will get completed (from the perspective of the user of the osd client) exactly once. This resolves: http://tracker.ceph.com/issues/3967Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
The page alignment field for a request is currently set in ceph_osdc_build_request(). It's not needed at that point nor do either of its callers need that value assigned at any point before they call ceph_osdc_start_request(). So move that assignment into ceph_osdc_start_request(). Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Use distinct fields for tracking the number of pages in a message's page array and in a message's page list. Currently only one or the other is used at a time, but that will be changing soon. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
The only remaining reason to pass the osd request to calc_layout() is to fill in its r_num_pages and r_page_alignment fields. Once it fills those in, it doesn't do anything more with them. We can therefore move those assignments into the caller, and get rid of the "req" parameter entirely. Note, however, that the only caller is ceph_osdc_new_request(), and that immediately overwrites those fields with values based on its passed-in page offset. So the assignment inside calc_layout() was redundant anyway. This resolves: http://tracker.ceph.com/issues/4262Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Move the formatting of the object name (oid) to use for an object request into the caller of calc_layout(). This makes the "vino" parameter no longer necessary, so get rid of it. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Have calc_layout() pass the computed object number back to its caller. (This is a small step to simplify review.) Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
If an invalid layout is provided to ceph_osdc_new_request(), its call to calc_layout() might return an error. At that point in the function we've already allocated an osd request structure, so we need to free it (drop a reference) in the event such an error occurs. The only other value calc_layout() will return is 0, so make that explicit in the successful case. This resolves: http://tracker.ceph.com/issues/4240Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
- 27 2月, 2013 4 次提交
-
-
由 Sage Weil 提交于
Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NAlex Elder <elder@inktank.com>
-
由 Sage Weil 提交于
Instead of using the old ceph_object_layout struct, update our internal ceph_calc_object_layout method to use the ceph_pg type. This allows us to pass the full 32-bit precision of the pgid.seed to the callers. It also allows some callers to avoid reaching into the request structures for the struct ceph_object_layout fields. Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NAlex Elder <elder@inktank.com>
-
由 Sage Weil 提交于
Always decode data into our cpu-native ceph_pg type that has the correct field widths. Limit any remaining uses of ceph_pg_v1 to dealing with the legacy protocol. Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NAlex Elder <elder@inktank.com>
-
由 Sage Weil 提交于
Rename the old version this type to distinguish it from the new version. Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NAlex Elder <elder@inktank.com>
-
- 20 2月, 2013 2 次提交
-
-
由 Alex Elder 提交于
Add support for CEPH_OSD_OP_STAT operations in the osd client and in rbd. This operation sends no data to the osd; everything required is encoded in identity of the target object. The result will be ENOENT if the object doesn't exist. If it does exist and no other error occurs the server returns the size and last modification time of the target object as output data (in little endian format). The size is a 64 bit unsigned and the time is ceph_timespec structure (two unsigned 32-bit integers, representing a seconds and nanoseconds value). This resolves: http://tracker.ceph.com/issues/4007Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Simplify the way the data length recorded in a message header is calculated in ceph_osdc_build_request(). Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
- 19 2月, 2013 9 次提交
-
-
由 Alex Elder 提交于
In osd_req_encode_op() there are a few cases that handle osd opcodes that are never used in the kernel. The presence of this code gives the impression it's correct (which really can't be assumed), and may impose some unnecessary restrictions on some upcoming refactoring of this code. So delete this effectively dead code, and report uses of the previously handled cases as unsupported. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
If osd_req_encode_op() is given any opcode it doesn't recognize it reports an error. This patch fleshes out that routine to distinguish between well-defined but unsupported values and values that are simply bogus. This and the next commit are related to: http://tracker.ceph.com/issues/4126Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
There are no actual users of ceph_osdc_wait_event(). This would have been one-shot events, but we no longer support those so just get rid of this function. Since this leaves nothing else that waits for the completion of an event, we can get rid of the completion in a struct ceph_osd_event. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
There is only one caller of ceph_osdc_create_event(), and it provides 0 as its "one_shot" argument. Get rid of that argument and just use 0 in its place. Replace the code in handle_watch_notify() that executes if one_shot is nonzero in the event with a BUG_ON() call. While modifying "osd_client.c", give handle_watch_notify() static scope. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
There is no caller of ceph_calc_raw_layout() outside of libceph, so there's no need to export from the module. Furthermore, there is only one caller, in calc_layout(), and it is not much more than a simple wrapper for that function. So get rid of ceph_calc_raw_layout() and embed it instead within calc_layout(). While touching "osd_client.c", get rid of the unnecessary forward declaration of __send_request(). Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
The only callers of ceph_osdc_init() and ceph_osdc_stop() ceph_create_client() and ceph_destroy_client() (respectively) and they are in the same kernel module as those two functions. There's therefore no need to export those interfaces, so don't. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
Two of the three callers of the osd client's send_queued() function already hold the osd client mutex and drop it before the call. Change send_queued() so it assumes the caller holds the mutex, and update all callers accordingly. Rename it __send_queued() to match the convention used elsewhere in the file with respect to the lock. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
The "num_reply" parameter to ceph_osdc_new_request() is never used inside that function, so get rid of it. Note that ceph_sync_write() passes 2 for that argument, while all other callers pass 1. It doesn't matter, but perhaps someone should verify this doesn't indicate a problem. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-
由 Alex Elder 提交于
There is only one caller of ceph_osdc_writepages(), and it always passes 0 as its "flags" argument. Get rid of that argument and replace its use in ceph_osdc_writepages() with 0. Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
-