- 07 6月, 2011 1 次提交
-
-
由 Michael Bauer 提交于
- Add the quirk "NOGET" to make the wheel work at all in native mode. - Replace the somehow broken report descriptor with a custom one to have separate throttle and brake axes. As there are significant differences in the descriptor (original descriptor "hides" the separate axes in a 24 bit FF00 usagepage, new descripter replaces that with two individual 8 bit desktop.y and desktop.rz usages) I provided a complete replacement descriptor instead trying to patch the original one. Patching the descriptor seems not feasible as the new one is much larger. Note: To actually test this you have to use the tool "ltwheelconf" to put the DFP into it's native mode - See below for more info. Background: Most Logitech wheels are initially reporting themselves with a "fallback" deviceID (USB_DEVICE_ID_LOGITECH_WHEEL - 0xc294), in order to make sure they are working even without having the proper driver installed. If the Logitech driver is installed it sends a special command to the wheel which sets the wheel to "native mode", enabling enhance features like: - Clutch pedal - extended wheel rotation range (up to 900 degrees) - H-gate shifter - separate axis for throttle / brake - all buttons When the wheel is set to native mode it basically disconnects and reconnects with a different deviceID (USB_DEVICE_ID_LOGITECH_DFP_WHEEL - 0xc298 in this case). I am working on a userspace tool [1] which does the switching from fallback to native mode. During development I found out that the Driving Force Pro wheel is not supported in native mode - quierk NOGET is missing and the throttle and brake axes are reported in a combined way only. Signed-off-by: NMichael Bauer <michael@m-bauer.org> Signed-off-by: NSimon Wood <simon@mungewell.org> [1] https://github.com/TripleSpeeder/LTWheelConfSigned-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 03 5月, 2011 1 次提交
-
-
由 Peter Gundermann 提交于
Gere's a small patch to add support for the Logitech G27 wheel, since the prior patch only added FF support for the Driving Force Pro and G25. The patch contains the changes from the G25 and DFP, too. I tested the changes with wine/LFS and got full support for all axes and buttons. Signed-off: Peter Gundermann <slim-one@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 3月, 2011 1 次提交
-
-
由 Jiri Kosina 提交于
Add force feedback support for Logitech Driving Force Pro wheel. Device IDs reported by Michal Malý. Reported-by: NMichal Malý <madcatxster@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 10 12月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Neaten current uses of dev_<level> by adding and using hid specific hid_<level> macros. Convert existing uses of dev_<level> uses to hid_<level>. Convert hid-pidff printk uses to hid_<level>. Remove err_hid and use hid_err instead. Add missing newlines to logging messages where necessary. Coalesce format strings. Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt Other miscellaneous changes: Add const struct hid_device * argument to hid-core functions extract() and implement() so hid_<level> can be used by them. Fix bad indentation in hid-core hid_input_field function that calls extract() function above. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 24 10月, 2010 1 次提交
-
-
由 Jiri Kosina 提交于
Fix wrong merge in hid-lg -- report fixup functions now get pointer to rdesc. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 04 10月, 2010 1 次提交
-
-
由 Hendrik Iben 提交于
This patch adds force feedback support for Logitech WingMan RumblePad gamepads by extending the Logitech Rumblepad 2 force feedback code. Signed-off-by: NHendrik Iben <Hendrik_Iben@web.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 9月, 2010 1 次提交
-
-
由 Simon Wood 提交于
The following patch adds support for the Logitech Speed Force Wireless gaming wheel. Originally designed for the WII console. Details on the protocol: http://wiibrew.org/wiki/Logitech_USB_steering_wheel This patch relies on previous patch: "Don't Send Feature Reports on Interrupt Endpoint" Logitech as produce a very similar wheel for the PS2/PS3, it is expected that this patch could also support the PS2/PS3 wheel if the USB ID's are added and (if required) the HID descriptor is modified. Signed-off-by: NSimon Wood <simon@mungewell.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 10 8月, 2010 1 次提交
-
-
由 Nikolai Kondrashov 提交于
Update hid_driver's report_fixup prototype to allow changing report descriptor size and/or returning completely different report descriptor. Update existing usage accordingly. This is to give more freedom in descriptor fixup and to allow having a whole fixed descriptor in the code for the sake of readability. Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 4月, 2010 1 次提交
-
-
由 Lorenzo Castelli 提交于
The keys are added to the generic wireless mappings in case other keyboards use them. Note that the product ID for the MX3200 is the same as USB_DEVICE_ID_S510_RECEIVER_2. Signed-off-by: NLorenzo Castelli <lcastelli@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 13 1月, 2010 1 次提交
-
-
由 Gary Stein 提交于
Implements a new USB-HID for Force Feedback based on the normal Logitech Force Feedback code and FF-Memless. Currently only supports the FF_CONSTANT effect although the joystick appears to support additional non-standard ones. Signed-off-by: NGary Stein <LordCnidarian@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 25 11月, 2009 1 次提交
-
-
由 Jiri Kosina 提交于
Put proper mapping of Media key on Logitech DiNovo Mini. According to the specification from Logitech webpage, this key is intended to launch a Media center. Reported-by: NStefan Plattner <Stefan.Plattner@ilogs.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 13 11月, 2009 1 次提交
-
-
由 Jiri Kosina 提交于
These devices wrongly report their axes as relative instead of absolute. Fix this in up report descriptor of the device before it enters the parser. Reported-by: simon.windows@gmail.com Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 23 7月, 2009 2 次提交
-
-
由 Peter Huewe 提交于
Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions of several HID drivers from drivers/hid/ Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Add force feedback support for Logitech WingMan Formula Force GP (0x046d/0xc293). Reported-by: wylda@volny.cz Tested-by: wylda@volny.cz Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 4月, 2009 1 次提交
-
-
由 Christophe Borivant 提交于
Add Product Id 0xc299 for the Logitech G25 force feedback wheel The Logitech G25 force feedback wheel, is first recognize by the kernel with the product id "0xc294". In this mode, we can't use all the axes and buttons of the wheel. Using a userland utility, it is possible to make the wheel switch to native mode -- http://svn.vdrift.net/viewvc.cgi/trunk/tools/G25manage/?root=VDrift In native mode, the wheel change its id number to "0xc299". The packet that needs to be sent to the wheel to swtich to native mode and change its PID is { 0xf8, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00 } Signed-off-by: NChristophe Borivant <christophe.borivant@wanadoo.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 30 3月, 2009 1 次提交
-
-
由 Jiri Slaby 提交于
This removal was scheduled and there is no problem with later distros to adapt for the new bus, thanks to aliases. module-init-tools map files are deprecated nowadays, so that the patch which introduced hid ones into the m-i-t won't be accepted and hence there is no reason for leaving compat stuff in. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 04 1月, 2009 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1146c) makes usbhid automatically call usbhid_set_leds() for any device that supports the keyboard boot protocol. In theory this should be perfectly safe. BIOSes send the LED output report as part of their normal device initialization, so any keyboard device supporting the boot protocol has to be able to handle it. As a side effect, the hid-dell and hid-bright drivers are no longer needed, and the Logitech keyboard driver can be removed from hid-lg. CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 10月, 2008 1 次提交
-
-
由 Dan Nicholson 提交于
This reverts commit 740f370d. It turned out to be correct in the first place: a positive value should be sent when the wheel is moved to the right, and a negative value when moved to the left. This is the behavior expected by the Xorg evdev driver. I must have had a remapping somewhere else in my system when originally testing this. Testing on another system shows that the unpatched kernel is correct. Here is a bug report from Mandriva that brought the problem to my attention: https://qa.mandriva.com/show_bug.cgi?id=44309#c19Signed-off-by: NDan Nicholson <dbn.lists@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 10月, 2008 5 次提交
-
-
由 Jiri Slaby 提交于
Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move the handling of the leds resetting from the core to the dell and logitech drivers. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move connecting from usbhid to the hid layer and fix also hidp in that manner. This removes all the ignore/force hidinput/hiddev connecting quirks. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Add compat option to hid code to allow loading of all modules on systems which don't allow autoloading because of old userspace. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move them from the core and input code to a separate driver. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-