The UDF file-system does not need the 's_dirt' superblock flag because it does
not define the 'write_super()' method. This flag was set to 1 in few places and
set to 0 in '->sync_fs()' and was basically useless. Stop using it because it
is on its way out.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NJan Kara <jack@suse.cz>

If ext3_setup_super() fails i.e. due to a too-high revision,
the error is logged in dmesg but the fs is not mounted RO as
indicated.

Tested by:

[164152.114551] EXT3-fs (sdb6): error: revision level too high, forcing read-only mode
/dev/sdb6 /mnt/test2 ext3 rw,seclabel,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0
                          ^^
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NAndreas Dilger <adilger@whamcloud.com>
Signed-off-by: NJan Kara <jack@suse.cz>

checkpatch.pl warns:

"WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>"

Below patch fixes it.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

We already use them for openat() and friends, but fchdir() also wants to
be able to use O_PATH file descriptors.  This should make it comparable
to the O_SEARCH of Solaris.  In particular, O_PATH allows you to access
(not-quite-open) a directory you don't have read persmission to, only
execute permission.

Noticed during development of multithread support for ksh93.
Reported-by: Nольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org    # O_PATH introduced in 3.0+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

File operations on /dev/ecryptfs would BUG() when the operations were
performed by processes other than the process that originally opened the
file. This could happen with open files inherited after fork() or file
descriptors passed through IPC mechanisms. Rather than calling BUG(), an
error code can be safely returned in most situations.

In ecryptfs_miscdev_release(), eCryptfs still needs to handle the
release even if the last file reference is being held by a process that
didn't originally open the file. ecryptfs_find_daemon_by_euid() will not
be successful, so a pointer to the daemon is stored in the file's
private_data. The private_data pointer is initialized when the miscdev
file is opened and only used when the file is released.

https://launchpad.net/bugs/994247Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Tested-by: NSasha Levin <levinsasha928@gmail.com>

'status' variable in ocfs2_global_read_info() is always != 0 when leaving the
function because it happens to contain number of read bytes. Thus we always log
error message although everything is OK. Since all error cases properly call
mlog_errno() before jumping to out_err, there's no reason to call mlog_errno()
on exit at all. This is a fallout of c1e8d35e (conversion of mlog_exit()
calls).
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed.

Hello,

Since ENXIO only means "offset beyond EOF" for SEEK_DATA/SEEK_HOLE,
Hence we should return the internal error unchanged if ocfs2_inode_lock() or
ocfs2_get_clusters_nocache() call failed rather than ENXIO.
Otherwise, it will confuse the user applications when they trying to understand the root cause.

Thanks Dave for pointing this out.

Thanks,
-Jeff

Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

When ocfs2dc thread holds dc_task_lock spinlock and receives soft IRQ it
deadlock itself trying to get same spinlock in ocfs2_wake_downconvert_thread.
Below is the stack snippet.

The patch disables interrupts when acquiring dc_task_lock spinlock.

	ocfs2_wake_downconvert_thread
	ocfs2_rw_unlock
	ocfs2_dio_end_io
	dio_complete
	.....
	bio_endio
	req_bio_endio
	....
	scsi_io_completion
	blk_done_softirq
	__do_softirq
	do_softirq
	irq_exit
	do_IRQ
	ocfs2_downconvert_thread
	[kthread]
Signed-off-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

Fix misplaced parentheses
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

The unaligned io flag is set in the kiocb when an unaligned
dio is issued, it should be cleared even when the dio fails,
or it may affect the following io which are using the same
kiocb.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

Don't grab the daemon mutex while holding the message context mutex.
Addresses this lockdep warning:

 ecryptfsd/2141 is trying to acquire lock:
  (&ecryptfs_msg_ctx_arr[i].mux){+.+.+.}, at: [<ffffffffa029c213>] ecryptfs_miscdev_read+0x143/0x470 [ecryptfs]

 but task is already holding lock:
  (&(*daemon)->mux){+.+...}, at: [<ffffffffa029c2ec>] ecryptfs_miscdev_read+0x21c/0x470 [ecryptfs]

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&(*daemon)->mux){+.+...}:
        [<ffffffff810a3b8d>] lock_acquire+0x9d/0x220
        [<ffffffff8151c6da>] __mutex_lock_common+0x5a/0x4b0
        [<ffffffff8151cc64>] mutex_lock_nested+0x44/0x50
        [<ffffffffa029c5d7>] ecryptfs_send_miscdev+0x97/0x120 [ecryptfs]
        [<ffffffffa029b744>] ecryptfs_send_message+0x134/0x1e0 [ecryptfs]
        [<ffffffffa029a24e>] ecryptfs_generate_key_packet_set+0x2fe/0xa80 [ecryptfs]
        [<ffffffffa02960f8>] ecryptfs_write_metadata+0x108/0x250 [ecryptfs]
        [<ffffffffa0290f80>] ecryptfs_create+0x130/0x250 [ecryptfs]
        [<ffffffff811963a4>] vfs_create+0xb4/0x120
        [<ffffffff81197865>] do_last+0x8c5/0xa10
        [<ffffffff811998f9>] path_openat+0xd9/0x460
        [<ffffffff81199da2>] do_filp_open+0x42/0xa0
        [<ffffffff81187998>] do_sys_open+0xf8/0x1d0
        [<ffffffff81187a91>] sys_open+0x21/0x30
        [<ffffffff81527d69>] system_call_fastpath+0x16/0x1b

 -> #0 (&ecryptfs_msg_ctx_arr[i].mux){+.+.+.}:
        [<ffffffff810a3418>] __lock_acquire+0x1bf8/0x1c50
        [<ffffffff810a3b8d>] lock_acquire+0x9d/0x220
        [<ffffffff8151c6da>] __mutex_lock_common+0x5a/0x4b0
        [<ffffffff8151cc64>] mutex_lock_nested+0x44/0x50
        [<ffffffffa029c213>] ecryptfs_miscdev_read+0x143/0x470 [ecryptfs]
        [<ffffffff811887d3>] vfs_read+0xb3/0x180
        [<ffffffff811888ed>] sys_read+0x4d/0x90
        [<ffffffff81527d69>] system_call_fastpath+0x16/0x1b
Signed-off-by: NTyler Hicks <tyhicks@canonical.com>

If the first attempt at opening the lower file read/write fails,
eCryptfs will retry using a privileged kthread. However, the privileged
retry should not happen if the lower file's inode is read-only because a
read/write open will still be unsuccessful.

The check for determining if the open should be retried was intended to
be based on the access mode of the lower file's open flags being
O_RDONLY, but the check was incorrectly performed. This would cause the
open to be retried by the privileged kthread, resulting in a second
failed open of the lower file. This patch corrects the check to
determine if the open request should be handled by the privileged
kthread.
Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>

When the server doesn't advertise CAP_LARGE_READ_X, then MS-CIFS states
that you must cap the size of the read at the client's MaxBufferSize.
Unfortunately, testing with many older servers shows that they often
can't service a read larger than their own MaxBufferSize.

Since we can't assume what the server will do in this situation, we must
be conservative here for the default. When the server can't do large
reads, then assume that it can't satisfy any read larger than its
MaxBufferSize either.

Luckily almost all modern servers can do large reads, so this won't
affect them. This is really just for older win9x and OS/2 era servers.
Also, note that this patch just governs the default rsize. The admin can
always override this if he so chooses.

Cc: <stable@vger.kernel.org> # 3.2
Reported-by: NDavid H. Durgee <dhdurgee@acm.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteven French <sfrench@w500smf.(none)>

While we are resolving directory modifications in the
tree log, we are triggering delayed metadata updates to
the filesystem btrees.

This commit forces the delayed updates to run so the
replay code can find any modifications done.  It stops
us from crashing because the directory deleltion replay
expects items to be removed immediately from the tree.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>
cc: stable@kernel.org

We can race with unlink and not actually be able to do our igrab in
btrfs_add_ordered_extent.  This will result in all sorts of problems.
Instead of doing the complicated work to try and handle returning an error
properly from btrfs_add_ordered_extent, just hold a ref to the inode during
writepages.  If we cannot grab a ref we know we're freeing this inode anyway
and can just drop the dirty pages on the floor, because screw them we're
going to invalidate them anyway.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The tree log stuff can have allocated space that we end up having split
across a bitmap and a real extent.  The free space code does not deal with
this, it assumes that if it finds an extent or bitmap entry that the entire
range must fall within the entry it finds.  This isn't necessarily the case,
so rework the remove function so it can handle this case properly.  This
fixed two panics the user hit, first in the case where the space was
initially in a bitmap and then in an extent entry, and then the reverse
case.  Thanks,
Reported-and-tested-by: NShaun Reich <sreich@kde.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When we're evicting an inode during log recovery, we need to ensure that the inode
is not in orphan state any more, which means inode's run_time flags has _no_
BTRFS_INODE_HAS_ORPHAN_ITEM.  Thus, the BUG_ON was triggered because of a wrong
check for the flags.
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We used the wrong ioctl macro for the getflags ioctl before.
As we don't have the set/getflags ioctls in the user space ioctl.h
at the moment, it's safe to fix it now.
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NAlexander Block <ablock84@googlemail.com>

This introduces btrfs_resume_balance_async(), which, given that
restriper state was recovered earlier by btrfs_recover_balance(),
resumes balance in btrfs-balance kthread.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Fix a bug that triggered asserts in btrfs_balance() in both normal and
resume modes -- restriper state was not properly restored on read-only
mounts.  This factors out resuming code from btrfs_restore_balance(),
which is now also called earlier in the mount sequence to avoid the
problem of some early writes getting the old profile.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Miao pointed out there's a problem with mixing dio writes and buffered
reads.  If the read happens between us invalidating the page range and
actually locking the extent we can bring in pages into page cache.  Then
once the write finishes if somebody tries to read again it will just find
uptodate pages and we'll read stale data.  So we need to lock the extent and
check for uptodate bits in the range.  If there are uptodate bits we need to
unlock and invalidate again.  This will keep this race from happening since
we will hold the extent locked until we create the ordered extent, and then
teh read side always waits for ordered extents.  There was also a race in
how we updated i_size, previously we were relying on the generic DIO stuff
to adjust the i_size after the DIO had completed, but this happens outside
of the extent lock which means reads could come in and not see the updated
i_size.  So instead move this work into where we create the extents, and
then this way the update ordered i_size stuff works properly in the endio
handlers.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

It is normal behaviour of the low level btrfs function btrfs_map_bio()
to complete a bio with -EIO if the device is missing, instead of just
preventing the bio creation in an earlier step.
This used to cause I/O statistic read error increments and annoying
printk_ratelimited messages. This commit fixes the issue.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Reported-by: NCarey Underwood <cwillu@cwillu.com>

Add sanity checks when loading sparing table from disk to avoid accessing
unallocated memory or writing to it.
Signed-off-by: NJan Kara <jack@suse.cz>

Check provided length of partition table so that (possibly maliciously)
corrupted partition table cannot cause accessing data beyond current buffer.
Signed-off-by: NJan Kara <jack@suse.cz>

Signed-off-by: NJan Kara <jack@suse.cz>

With the tree mod log, we may end up with two roots (the current root and a
rewinded version of it) both pointing to two leaves, l1 and l2, of which l2
had already been cow-ed in the current transaction. If we don't rewind any
tree blocks, we cannot have two roots both pointing to an already cowed tree
block.

Now there is btrfs_next_leaf, which has a leaf locked and wants a lock on
the next (right) leaf. And there is push_leaf_left, which has a (cowed!)
leaf locked and wants a lock on the previous (left) leaf.

In order to solve this dead lock situation, we use try_lock in
btrfs_next_leaf (only in case it's called with a tree mod log time_seq
paramter) and if we fail to get a lock on the next leaf, we give up our lock
on the current leaf and retry from the very beginning.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

When a MOD_LOG_KEY_ADD operation is rewinded, we remove the key from the
tree block. If its not the last key, removal involves a move operation.
This move operation was explicitly done before this commit.

However, at insertion time, there's a move operation before the actual
addition to make room for the new key, which is recorded in the tree mod
log as well. This means, we must drop the move operation when rewinding the
add operation, because the next operation we'll be rewinding will be the
corresponding MOD_LOG_MOVE_KEYS operation.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

When delayed refs exist, btrfs_find_all_roots used to hold the delayed ref
mutex way longer than actually required. We ought to drop it immediately
after we're done collecting all the delayed refs.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Several callers of insert_ptr set the tree_mod_log parameter to 0 to avoid
addition to the tree mod log. In fact, we need all of those operations. This
commit simply removes the additional parameter and makes addition to the
tree mod log unconditional.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

For the tree mod log, we don't log any operations at leaf level. If the root
is at the leaf level (i.e. the tree consists only of the root), then
__tree_mod_log_oldest_root will find a ROOT_REPLACE operation in the log
(because we always log that one no matter which level), but no other
operations.

With this patch __tree_mod_log_oldest_root exits cleanly instead of
BUGging in this situation. get_old_root checks if its really a root at leaf
level in case we don't have any operations and WARNs if this assumption
breaks.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

With the tree mod log, we can have a tree that's two levels high, but
btrfs_search_old_slot may still return a path with the tree root at level
one instead. __resolve_indirect_ref must care for this and accept parents in
a lower level than expected.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

We track two conditions to decide if we should sleep while waiting for more
delayed refs, the number of delayed refs (num_refs) and the first entry in
the list of blockers (first_seq).

When we suspect staleness, we save num_refs and do one more cycle. If
nothing changes, we then save first_seq for later comparison and do
wait_event. We ought to save first_seq the very same moment we're saving
num_refs. Otherwise we cannot be sure that nothing has changed and we might
start waiting when we shouldn't, which could lead to starvation.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Commit "818039c7 UBIFS: fix debugfs-less systems support" fixed one
regression but introduced a different regression - the debugfs is now always
compiled out. Root cause: IS_ENABLED() arguments should be used with the
CONFIG_* prefix.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Rename the XFS log structure to xlog to help crash distinquish it from the
other logs in Linux.
Signed-off-by: NMark Tinguely <tinguely@sgi.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBen Myers <bpm@sgi.com>

Revert commit 1307bbd2, which uses the s_umount semaphore to provide
exclusion between xfs_sync_worker and unmount, in favor of shutting down
the sync worker before freeing the log in xfs_log_unmount.  This is a
cleaner way of resolving the race between xfs_sync_worker and unmount
than using s_umount.
Signed-off-by: NBen Myers <bpm@sgi.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Commit de1cbee4 which removed b_file_offset in favor of b_bn introduced a bug
causing xfs_buf_allocate_memory() to overestimate the number of necessary
pages. The problem is that xfs_buf_alloc() sets b_bn to -1 and thus effectively
every buffer is straddling a page boundary which causes
xfs_buf_allocate_memory() to allocate two pages and use vmalloc() for access
which is unnecessary.

Dave says xfs_buf_alloc() doesn't need to set b_bn to -1 anymore since the
buffer is inserted into the cache only after being fully initialized now.
So just make xfs_buf_alloc() fill in proper block number from the beginning.

CC: David Chinner <dchinner@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

When we fail to find an matching extent near the requested extent
specification during a left-right distance search in
xfs_alloc_ag_vextent_near, we fail to free the original cursor that
we used to look up the XFS_BTNUM_CNT tree and hence leak it.
Reported-by: NChris J Arges <chris.j.arges@canonical.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBen Myers <bpm@sgi.com>

An inode in the AIL can be flush locked and marked stale if
a cluster free transaction occurs at the right time. The
inode item is then marked as flushing, which causes xfsaild
to spin and leaves the filesystem stalled. This is
reproduced by running xfstests 273 in a loop for an
extended period of time.

Check for stale inodes before the flush lock. This marks
the inode as pinned, leads to a log flush and allows the
filesystem to proceed.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

There is some concern that these iput()'s could be the final iputs and could
induce lockups on people waiting on writeback.  This would happen in the
rare case that we don't create ordered extents because of an error, but it
is theoretically possible and we already have a mechanism to deal with this
so just make them delayed iputs to negate any worry.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(.  Add back a spin_lock that should be there and
we are now all set.  Thanks,
Btrfs: add a missing spin_lock

When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(.  Add back a spin_lock that should be there and
we are now all set.  Thanks,
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>