Move the __attribute_const__ declarations such that sparse understands
that these apply to the function itself and not to the return type.
This avoids that sparse reports error messages like the following:

drivers/infiniband/core/verbs.c:73:12: error: symbol 'ib_event_msg' redeclared with different type (originally declared at include/rdma/ib_verbs.h:470) - different modifiers

Fixes: 2b1b5b60 ("IB/core, cma: Nice log-friendly string helpers")
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for network namespaces in the ib_cma module. This is
accomplished by:

1. Adding network namespace parameter for rdma_create_id. This parameter is
   used to populate the network namespace field in rdma_id_private.
   rdma_create_id keeps a reference on the network namespace.
2. Using the network namespace from the rdma_id instead of init_net inside
   of ib_cma, when listening on an ID and when looking for an ID for an
   incoming request.
3. Decrementing the reference count for the appropriate network namespace
   when calling rdma_destroy_id.

In order to preserve the current behavior init_net is passed when calling
from other modules.
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some of us keep revisiting the code to decode enumerations that
appear in out logs. Let's borrow the nice logging helpers that
exists in xprtrdma and rds for CMA events, IB events and WC statuses.
Reviewd-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow the rdma_ucm to query the IB service ID formed or allocated by
the rdma_cm by exporting the cma_get_service_id() functionality.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Allow the user to specify the qkey when using AF_IB.  The qkey is
added to struct rdma_ucm_conn_param in place of a reserved field, but
for backwards compatability, is only accessed if the associated
rdma_cm_id is using AF_IB.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The AF_IB uses a 64-bit service id (SID), which the user can control
through the use of a mask.  The rdma_cm will assign values to the
unmasked portions of the SID based on the selected port space and port
number.

Because the IB spec divides the SID range into several regions, a
SID/mask combination may fall into one of the existing port space
ranges as defined by the RDMA CM IP Annex.  Map the AF_IB SID to the
correct RDMA port space.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Provide an option for the user to specify that listens should only
accept connections where the incoming address family matches that of
the locally bound address.  This is used to support the equivalent of
IPV6_V6ONLY socket option, which allows an app to only accept
connection requests directed to IPv6 addresses.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add RDMA_PS_IB.  XRC QP types will use the IB port space when operating
over the RDMA CM.  For the 'IP protocol' field value, we select 0x3F,
which is listed as being for 'any local network'.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The RDMA CM currently infers the QP type from the port space selected
by the user.  In the future (eg with RDMA_PS_IB or XRC), there may not
be a 1-1 correspondence between port space and QP type.  For netlink
export of RDMA CM state, we want to export the QP type to userspace,
so it is cleaner to explicitly associate a QP type to an ID.

Modify rdma_create_id() to allow the user to specify the QP type, and
use it to make our selections of datagram versus connected mode.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Move cma.c's internal definition of enum cma_state to enum rdma_cm_state
in an exported header so that it can be exported via RDMA netlink.
Signed-off-by: NNir Muchtar <nirm@voltaire.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Lustre requires that clients bind to a privileged port number before
connecting to a remote server.  On larger clusters (typically more
than about 1000 nodes), the number of privileged ports is exhausted,
resulting in lustre being unusable.

To handle this, we add support for reusable addresses to the rdma_cm.
This mimics the behavior of the socket option SO_REUSEADDR.  A user
may set an rdma_cm_id to reuse an address before calling
rdma_bind_addr() (explicitly or implicitly).  If set, other
rdma_cm_id's may be bound to the same address, provided that they all
have reuse enabled, and there are no active listens.

If rdma_listen() is called on an rdma_cm_id that has reuse enabled, it
will only succeed if there are no other id's bound to that same
address.  The reuse option is exported to user space.  The behavior of
the kernel reuse implementation was verified against that given by
sockets.

This patch is derived from a path by Ira Weiny <weiny2@llnl.gov>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The defined SCTP number is incorrect (0x83, rather than 0x84), and
since it is not used anywhere, simply remove the definition.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

There are a few places where the RDMA CM code handles IPv6 by doing

	struct sockaddr		addr;
	u8			pad[sizeof(struct sockaddr_in6) -
				    sizeof(struct sockaddr)];

This is fragile and ugly; handle this in a better way with just

	struct sockaddr_storage	addr;

[ Also roll in patch from Aleksey Senin <alekseys@voltaire.com> to
  switch to struct sockaddr_storage and get rid of padding arrays in
  struct rdma_addr. ]
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Consumers that want to re-use their QPs in new connections need to
know when the QP has exited the timewait state.  Report the timewait
event through the rdma_cm.
Signed-off-by: NAmir Vadai <amirv@mellanox.co.il>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add an RDMA_CM_EVENT_ADDR_CHANGE event can be used by rdma-cm
consumers that wish to have their RDMA sessions always use the same
links (eg <hca/port>) as the IP stack does.  In the current code, this
does not happen when bonding is used and fail-over happened but the IB
link used by an already existing session is operating fine.

Use the netevent notification for sensing that a change has happened
in the IP stack, then scan the rdma-cm ID list to see if there is an
ID that is "misaligned" with respect to the IP stack, and deliver
RDMA_CM_EVENT_ADDR_CHANGE for this ID.  The consumer can act on the
event or just ignore it.
Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Remove subversion $Id lines and improve readability by fixing other
coding style problems pointed out by checkpatch.pl.
Signed-off-by: NDotan Barak <dotanba@gmail.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The license text for several files references a third software license
that was inadvertently copied in.  Update the license to what was
intended.  This update was based on a request from HP.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Provide support to specify a type of service for a communication
identifier.  A new function call is used when dealing with IPv4
addresses.  For IPv6 addresses, the ToS is specified through the
traffic class field in the sockaddr_in6 structure.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>

[ The comments Eitan Zahavi and myself have made over the v1 post at 
  <http://lists.openfabrics.org/pipermail/general/2007-August/039247.html>
  were fully addressed. ]
 
Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> 
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Extend rdma_cm to support multicast communication.  Multicast support
is added to the existing RDMA_PS_UDP port space, as well as a new
RDMA_PS_IPOIB port space.  The latter port space allows joining the
multicast groups used by IPoIB, which enables offloading IPoIB traffic
to a separate QP.  The port space determines the signature used in the
MGID when joining the group.  The newly added RDMA_PS_IPOIB also
allows for unicast operations, similar to RDMA_PS_UDP.

Supporting the RDMA_PS_IPOIB requires changing how UD QPs are initialized,
since we can no longer assume that the qkey is constant.  This requires
saving the Q_Key to use when attaching to a device, so that it is
available when creating the QP.  The Q_Key information is exported to
the user through the existing rdma_init_qp_attr() interface.

Multicast support is also exported to userspace through the rdma_ucm.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Allow the use of UD QPs through the rdma_cm, in order to provide
address translation services for resolving IB addresses for datagram
messages using SIDR.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

During connection establishment, the passive side of a connection can
receive messages from the active side before the connection event has
been delivered to the user.  Allow the passive side to send messages
in response to received data before the event is delivered.  To handle
the case where the connection messages are lost, a new rdma_notify()
function is added that users may invoke to force a connection into the
established state.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Connection information was never given to the recipient of a
connection request or reply message.  Only the event was delivered.
Report the connection data with the event to allows user to
reject the connection based on the requested parameters, or adjust
their resources to match the request.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The qp_type parameter into the rdma_cm is unneeded, and can be
misleading.  The QP type should be determined from the port space.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Document the reject sending and modifying QP to error done in rdma_accept().
Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clarify that rdma_destroy_id cancels outstanding asynchronous operations on the
Associated id.
Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Kernel connection management agent over InfiniBand that connects based
on IP addresses.  The agent defines a generic RDMA connection
abstraction to support clients wanting to connect over different RDMA
devices.

The agent also handles RDMA device hotplug events on behalf of clients.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>