Add DT entry for MMC. Also add entry for pinmux information.
Tested:
1) Without GPIO card detection and EDMA support as DT support for
   GPIO and EDMA are yet come.
2) By creating/deleting files and mounting/unmounting the partition.
Signed-off-by: NManjunathappa, Prakash <prakash.pm@ti.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: devicetree-discuss@lists.ozlabs.org
Cc: cjb@laptop.org
Cc: Sekhar Nori <nsekhar@ti.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

Add da850 wdt DT node.
Add OF_DEV_AUXDATA for wdt driver to use wdt clock.
Signed-off-by: NKumar, Anil <anilkumar.v@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

Add I2C0 device tree and pin muxing information to da850-evm.
Also, add OF_DEV_AUXDATA for I2C0 controller driver in da850
board dt file to use I2C0 clock.
Verified i2c0 node gets created in sys class interface as
"/sys/class/i2c-dev/i2c-0/subsystem/i2c-0".

nsekhar@ti.com: tested using i2cdetect and i2cdump.
Signed-off-by: NVishwanathrao Badarkhe, Manish <manishv.b@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

Add RTC DT entries in da850 dts file.

Tested on da850-evm device.
Test Procedure:
$ date 2013.01.28-10:00:00 # usage: date[YYYY.]MM.DD-hh:mm[:ss]
$ hwclock -w
(reset board and check system time)
Signed-off-by: NMrugesh Katepallewar <mrugesh.mk@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

This patch moves 'interrupt-parent' property to soc node, so that
the child inherits this property. This avoids adding 'interrupt-parent'
property to each node.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

Add NAND driver DT node and related pinctrl DT data to export NAND
functionality on da850 evm.
Signed-off-by: NKumar, Anil <anilkumar.v@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

For DT, DaVinci platform can use pinctrl-single driver for handling
padconf registers.

Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required
pinctrl DT entries in da850 dts file.

 Test procedure
  1)Populate DT file with NAND node information.
  2)Populate board DT file with pinmux information for NAND.
  3)Boot and confirm NAND is detected by the kernel.
  4)cat /proc/mtd to show partitions.
Signed-off-by: NKumar, Anil <anilkumar.v@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

Add DT data for DA850 SoC. Only interrupt controller and
serial port information is being added at this time.
Signed-off-by: NHeiko Schocher <hs@denx.de>
[nsekhar@ti.com: refactored DT data into SoC specific and
board specific and include SoC data into .dtsi file]
Signed-off-by: NSekhar Nori <nsekhar@ti.com>