Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 13 8月, 2008 1 次提交
    • A
      IB/ehca: Discard double CQE for one WR · 6773f079
      由 Alexander Schmidt 提交于 
      Under rare circumstances, the ehca hardware might erroneously generate
two CQEs for the same WQE, which is not compliant to the IB spec and
will cause unpredictable errors like memory being freed twice. To
avoid this problem, the driver needs to detect the second CQE and
discard it.

For this purpose, introduce an array holding as many elements as the
SQ of the QP, called sq_map. Each sq_map entry stores a "reported"
flag for one WQE in the SQ. When a work request is posted to the SQ,
the respective "reported" flag is set to zero. After the arrival of a
CQE, the flag is set to 1, which allows to detect the occurence of a
second CQE.

The mapping between WQE / CQE and the corresponding sq_map element is
implemented by replacing the lowest 16 Bits of the wr_id with the
index in the queue map. The original 16 Bits are stored in the sq_map
entry and are restored when the CQE is passed to the application.
Signed-off-by: NAlexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      6773f079
  3. 23 7月, 2008 1 次提交
  5. 08 5月, 2008 1 次提交
  7. 30 4月, 2008 1 次提交
  9. 24 4月, 2008 1 次提交
  11. 17 4月, 2008 1 次提交
  13. 05 2月, 2008 1 次提交
  15. 26 1月, 2008 3 次提交
    • J
      IB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware · 2ec8e662
      由 Joachim Fenkes 提交于 
      Some HW revisions of eHCA2 may cause an RC connection to break if they
received RDMA Reads over that connection before.  This can be
prevented by assuring that, after the first RDMA Read, the QP receives
a new RDMA Read every few million link packets.

Include code into the driver that inserts an empty (size 0) RDMA Read
into the message stream every now and then if the consumer doesn't
post them frequently enough.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      2ec8e662
    • H
      IB/ehca: Add "port connection autodetect mode" · bbdd267e
      由 Hoang-Nam Nguyen 提交于 
      This patch enhances ehca with a capability to "autodetect" the ports
being connected physically. In order to utilize that function the
module option nr_ports must be set to -1 (default is 2 - two
ports). This feature is experimental and will made the default later.

More detail:

If the user connects only one port to the switch, current code requires
  1) port one to be connected and
  2) module option nr_ports=1 to be given.

If autodetect is enabled, ehca will not wait at creation of the GSI QP
for the respective port to become active. Since firmware does not
accept modify_qp() while the port is down at initialization, we need
to cache all calls to modify_qp() for the SMI/GSI QP and just return a
good return code.

When a port is activated and we get a PORT_ACTIVE event, we replay the
cached modify-qp() parms and re-trigger any posted recv WRs. Only then
do we forward the PORT_ACTIVE event to registered clients.

The result of this autodetect patch is that all ports will be
accessible by the users. Depending on their respective cabling only
those ports that are connected properly will become operable. If a
user tries to modify a regular QP of a non-connected port, modify_qp()
will fail. Furthermore, ibv_devinfo should show the port state
accordingly.

Note that this patch primarily improves the loading behaviour of
ehca. If the cable is removed while the driver is operating and
plugged in again, firmware will handle that properly by sending an
appropriate async event.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      bbdd267e
    • H
      IB/ehca: Define array to store SMI/GSI QPs · b8b50e35
      由 Hoang-Nam Nguyen 提交于 
      Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      b8b50e35
  17. 14 12月, 2007 1 次提交
  19. 14 11月, 2007 1 次提交
  21. 18 10月, 2007 1 次提交
  23. 17 10月, 2007 1 次提交
  25. 10 10月, 2007 4 次提交
  27. 29 7月, 2007 1 次提交
  29. 21 7月, 2007 2 次提交
    • S
      IB/ehca: Support small QP queues · e2f81daf
      由 Stefan Roscher 提交于 
      eHCA2 supports QP queues that can be as small as 512 bytes. This
greatly reduces memory overhead for consumers that use lots of QPs
with small queues (e.g. RDMA-only QPs). Apart from dealing with
firmware, this code needs to manage bite-sized chunks of kernel pages,
making sure that no kernel page is shared between different protection
domains.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
      e2f81daf
    • H
      IB/ehca: Support large page MRs · 5bb7d929
      由 Hoang-Nam Nguyen 提交于 
      Add support for MR pages larger than 4K on eHCA2. This reduces
firmware memory consumption.  If enabled via the mr_largepage module
parameter, the MR page size will be determined based on the MR length
and the hardware capabilities -- if the MR is >= 16M, 16M pages are
used, for example.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      5bb7d929
  31. 18 7月, 2007 2 次提交
  33. 10 7月, 2007 7 次提交
  35. 15 5月, 2007 1 次提交
  37. 09 5月, 2007 1 次提交
    • R
      IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules · f7c6a7b5
      由 Roland Dreier 提交于 
      Export ib_umem_get()/ib_umem_release() and put low-level drivers in
control of when to call ib_umem_get() to pin and DMA map userspace,
rather than always calling it in ib_uverbs_reg_mr() before calling the
low-level driver's reg_user_mr method.

Also move these functions to be in the ib_core module instead of
ib_uverbs, so that driver modules using them do not depend on
ib_uverbs.

This has a number of advantages:
 - It is better design from the standpoint of making generic code a
   library that can be used or overridden by device-specific code as
   the details of specific devices dictate.
 - Drivers that do not need to pin userspace memory regions do not
   need to take the performance hit of calling ib_mem_get().  For
   example, although I have not tried to implement it in this patch,
   the ipath driver should be able to avoid pinning memory and just
   use copy_{to,from}_user() to access userspace memory regions.
 - Buffers that need special mapping treatment can be identified by
   the low-level driver.  For example, it may be possible to solve
   some Altix-specific memory ordering issues with mthca CQs in
   userspace by mapping CQ buffers with extra flags.
 - Drivers that need to pin and DMA map userspace memory for things
   other than memory regions can use ib_umem_get() directly, instead
   of hacks using extra parameters to their reg_phys_mr method.  For
   example, the mlx4 driver that is pending being merged needs to pin
   and DMA map QP and CQ buffers, but it does not need to create a
   memory key for these buffers.  So the cleanest solution is for mlx4
   to call ib_umem_get() in the create_qp and create_cq methods.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      f7c6a7b5
  39. 25 4月, 2007 1 次提交
  41. 02 3月, 2007 1 次提交
    • H
      IB/ehca: Fix sync between completion handler and destroy cq · 31726798
      由 Hoang-Nam Nguyen 提交于 
      This patch fixes two issues reported by Roland Dreier and Christoph Hellwig:

- Mismatched sync/locking between completion handler and destroy cq We
  introduced a counter nr_events per cq to track number of irq events
  seen. This counter is incremented when an event queue entry is seen
  and decremented after completion handler has been called regardless
  if scaling code is active or not. Note that nr_callbacks tracks
  number of events assigned to a cpu and both counters can potentially
  diverge.

  The sync between running completion handler and destroy cq is done
  by using the global spin lock ehca_cq_idr_lock.

- Replace yield by wait_event on the counter above to become zero.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      31726798
  43. 17 2月, 2007 2 次提交
  45. 05 2月, 2007 2 次提交
  47. 23 9月, 2006 1 次提交