- 06 8月, 2011 34 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
And also remove unused variable 'my_id_table'. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
Otherwise, the error path will always be executed. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
The memory for td_info which is allocated in initialize_sensor() should be properly kfreed in mid_thermal_probe() error patch and mid_thermal_remove(). Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 J Witteveen 提交于
The N510 benefits from this code as well. Below is a patch to include support. Signed-off-by: NJouke Witteveen <j.witteveen@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
ref: http://dev.iksaif.net/projects/3/wiki/Asus-laptop_WAPFSigned-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Cc: stable@kernel.org Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Based on a patch from Nate Weibley. <nweibley@gmail.com>. Cc: Nate Weibley <nweibley@gmail.com> Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Seth Forshee 提交于
The T101MT Home/Express Gate key autorepeats in hardware, but sparse-keymap does not support hardware autorepeat. Enable the input core's software autorepeat to emulate the hardware behavior. Normal hotkeys are autoreleased, so the behavior of these keys will not be affected. Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Seth Forshee 提交于
This key is different than other hotkeys, having seperate scan codes for press, release, and hold, so it requires some special filtering. Press and release events are passed on, and hold events are ignored since sparse-keymap does not support hardware autorepeat. Note that "Home" in the context of this button doesn't mean the same thing as the usual Home key, and it really isn't clear at all what is meant by "Home". The manufacurer's description of the button indicates that it should launch some sort of touch screen settings interface on short press and apply a desktop rotation on long press. Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Seth Forshee 提交于
This is required for the T101MT home key, which behaves differently than other hotkeys. Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
The code was completly broken, and should never had been sent to the kernel. That's what happens when you write code without hardware to test it. Cc: stable@kernel.org Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
When acpi_backlight=vendor in cmdline or no backlight support in acpi video device, ideapad-laptop will register backlight device and control brightness and backlight power via the command in VPC2004. Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
Create /sys/devices/platform/ideapad/cfg for showing cfg value. Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Andy Lutomirski 提交于
I suspect that this works on T410. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Lee, Chun-Yi 提交于
After test, msi-laptop driver also can support MSI U270 netbook. So, add MSI U270's dmi information to module alias and scm table for support this machine. Tested on MSI U270 netbook. Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Seth Forshee 提交于
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Julien Valroff 提交于
Would you please consider applying the following patch adding support for the Aspire 1810TZ BIOS v.1.3314 version to the acerhdf module and avoids the following error: acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, ple= ase report, aborting! Not sure about the other Aspire models, but it seems at least 1810T should also be updated. Signed-off-by: NJulien Valroff <julien@kirya.net>
-
由 Axel Lin 提交于
DEFINE_MUTEX() will automatically initialize buffer_mutex, no need to call mutex_init() in dell_init(). Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Lee, Chun-Yi 提交于
we can now autodetect internal 3G device and already have the threeg rfkill device. So, we plan to remove threeg sysfs support for it's no longer necessary. We also plan to remove interface sysfs file that exposed which ACPI-WMI interface that was used by acer-wmi driver. It will replaced by information log when acer-wmi initial. We keep it around for userspace compatibility reasons, schedule removal in 2012. Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Acked-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (55 commits) Revert "drm/i915: Try enabling RC6 by default (again)" drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D Connector drm/radeon: Log Subsystem Vendor and Device Information drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines (here: Asus M2A-VM HDMI) drm: Separate EDID Header Check from EDID Block Check drm: Add NULL check about irq functions drm: Fix irq install error handling drm/radeon: fix potential NULL dereference in drivers/gpu/drm/radeon/atom.c drm/radeon: clean reg header files drm/debugfs: Initialise empty variable drm/radeon/kms: add thermal chip quirk for asus 9600xt drm/radeon: off by one in check_reg() functions drm/radeon/kms: fix version comment due to merge timing drm/i915: allow cache sharing policy control drm/i915/hdmi: HDMI source product description infoframe support drm/i915/hdmi: split infoframe setting from infoframe type code drm: track CEA version number if present drm/i915: Try enabling RC6 by default (again) Revert "drm/i915/dp: Zero the DPCD data before connection probe" drm/i915/dp: wait for previous AUX channel activity to clear ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Size mondo queues more sanely. sparc: Access kernel TSB using physical addressing when possible. sparc: Fix __atomic_add_unless() return value. sparc: use kbuild-generic support for true asm-generic header files sparc: Use popc when possible for ffs/__ffs/ffz. sparc: Set reboot-cmd using reboot data hypervisor call if available. sparc: Add some missing hypervisor API groups. sparc: Use hweight64() in popc emulation. sparc: Use popc if possible for hweight routines. sparc: Minor tweaks to Niagara page copy/clear. sparc: Sanitize cpu feature detection and reporting.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets mlx4: decreasing ref count when removing mac net: Fix security_socket_sendmsg() bypass problem. net: Cap number of elements for sendmmsg net: sendmmsg should only return an error if no messages were sent ixgbe: fix PHY link setup for 82599 ixgbe: fix __ixgbe_notify_dca() bail out code igb: fix WOL on second port of i350 device e1000e: minor re-order of #include files e1000e: remove unnecessary check for NULL pointer intel drivers: repair missing flush operations macb: restore wrap bit when performing underrun cleanup cdc_ncm: fix endianness problem. irda: use PCI_VENDOR_ID_* mlx4: Fixing Ethernet unicast packet steering net: fix NULL dereferences in check_peer_redir() bnx2x: Clear MDIO access warning during first driver load bnx2x: Fix BCM578xx MAC test bnx2x: Fix BCM54618se invalid link indication bnx2x: Fix BCM84833 link ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: drivers/ide/cy82c693.c: Add missing pci_dev_put ide: Fix irq flags madness
-
- 05 8月, 2011 6 次提交
-
-
由 Max Matveev 提交于
When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added in 0f8d3c7a the rest of the code wasn't told so now it's possible to bind IPv6 datagram socket to ::ffff.0.0.0.0, connect it to another IPv4 address and it will all work except for getsockhame() which does not return the local address as expected. To give getsockname() something to work with check for 'mapped INADDR_ANY' when connecting and update the in-core source addresses appropriately. Signed-off-by: NMax Matveev <makc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
For older FW versions, when a Mac address removed from Mac table, we should set 0 for reference count for the corresponding Mac index. Fixes a bug where removing Mac from the table still left that entry as invalid. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Tested-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Tetsuo Handa 提交于
The sendmmsg() introduced by commit 228e548e "net: Add sendmmsg socket system call" is capable of sending to multiple different destination addresses. SMACK is using destination's address for checking sendmsg() permission. However, security_socket_sendmsg() is called for only once even if multiple different destination addresses are passed to sendmmsg(). Therefore, we need to call security_socket_sendmsg() for each destination address rather than only the first destination address. Since calling security_socket_sendmsg() every time when only single destination address was passed to sendmmsg() is a waste of time, omit calling security_socket_sendmsg() unless destination address of previous datagram and that of current datagram differs. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NAnton Blanchard <anton@samba.org> Cc: stable <stable@kernel.org> [3.0+] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Blanchard 提交于
To limit the amount of time we can spend in sendmmsg, cap the number of elements to UIO_MAXIOV (currently 1024). For error handling an application using sendmmsg needs to retry at the first unsent message, so capping is simpler and requires less application logic than returning EINVAL. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable <stable@kernel.org> [3.0+] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Blanchard 提交于
sendmmsg uses a similar error return strategy as recvmmsg but it turns out to be a confusing way to communicate errors. The current code stores the error code away and returns it on the next sendmmsg call. This means a call with completely valid arguments could get an error from a previous call. Change things so we only return an error if no datagrams could be sent. If less than the requested number of messages were sent, the application must retry starting at the first failed one and if the problem is persistent the error will be returned. This matches the behaviour of other syscalls like read/write - it is not an error if less than the requested number of elements are sent. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable <stable@kernel.org> [3.0+] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-