The SCO buffer size values on HP laptops with a Bluetooth chip from
Broadcom are wrong. The USB Bluetooth driver has to set a quirk to
correct the SCO buffer size values.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The ThinkPad R60E uses a Broadcom based Bluetooth chip and even this
version needs the quirk to correct the SCO buffer size values.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In the case the device registration for a new Bluetooth low-level
connection fails there is no need to unregister it when the temporary
data structure has been removed.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When calling send() with a zero length parameter on a RFCOMM socket
it returns a positive value. In this rare case the variable err is
used uninitialized and unfortunately its value is returned.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If the DLC device is no longer attached to the TTY device, then return
errors or default values for various callbacks of the TTY layer.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

With malformed packets it might be possible to overwrite internal
CMTP and CAPI data structures. This patch adds additional length
checks to prevent these kinds of remote attacks.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Trivial. Newlines missing on the SOCK_DEBUG's for X.25 facility
negotiation.
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The inet_create() and inet6_create() functions incorrectly set the
inet_sock->is_icsk field.  Both functions assume that the is_icsk field is
large enough to hold at least a INET_PROTOSW_ICSK value when it is actually
only a single bit.  This patch corrects the assignment by doing a boolean
comparison whose result will safely fit into a single bit field.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: Delete mls_copy_context

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] PNX8550: Fix system timer support
  [MIPS] TX49: Fix use of CDEX build_store_reg()
  [MIPS] pnx8550: Fix write_config_byte() PCI config space accessor
  [MIPS] Fix build errors on SEAD
  [MIPS] SMTC build fix
  [MIPS] csum_partial and copy in parallel
  [MIPS] Malta: Add missing MTD file.

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Provide basic printk_clock() implementation
  [ARM] Resolve fuse and direct-IO failures due to missing cache flushes
  [ARM] pass vma for flush_anon_page()
  [ARM] Fix potential MMCI bug
  [ARM] Fix kernel-mode undefined instruction aborts
  [ARM] 4082/1: iop3xx: fix iop33x gpio register offset
  [ARM] 4070/1: arch/arm/kernel: fix warnings from missing includes
  [ARM] 4079/1: iop: Update MAINTAINERS

This reverts commit b0268726, which has
been linked to several problem reports with IO-APIC and the timer.
Machines either don't boot because the timer doesn't happen, or we get
double timer interrupts because we end up double-routing the timer irq
through multiple interfaces.

See for example

	http://lkml.org/lkml/2006/12/16/101
	http://lkml.org/lkml/2007/1/3/9
	http://bugzilla.kernel.org/show_bug.cgi?id=7789

about some of the discussion.

Patches to fix this cleanup exist (and have been confirmed to work fine
at least for some of the affected cases) and we'll revisit it for
2.6.21, but this late in the -rc series we're better off just reverting
the incomplete commit that caused the problems.
Suggested-by: NAdrian Bunk <bunk@stusta.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Yinghai Lu <yinghai.lu@amd.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This deletes mls_copy_context() in favor of mls_context_cpy() and
replaces mls_scopy_context() with mls_context_cpy_low().
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

the patch inlined below restores proper time accounting for PNX8550-based
boards. It also gets rid of #ifdef in the generic code which becomes
unnecessary then.

It's functionally identical to the previous patch with the same name but
it has minor comments from Atsushi and Sergei taken into account.
Signed-off-by: NVitaly Wool <vwool@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The commit a923660d786a53e78834b19062f7af2535f7f8ad accidently
prevents TX49 from using CDEX.  Use build_dst_pref() only if prefetch
for store was really available.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There's a serious typo in the function:
  arch/mips/pci/ops-pnx8550.c:write_config_byte()

The parameter passed to the function config_access() is PCI_CMD_CONFIG_READ
instead of PCI_CMD_CONFIG_WRITE. This renders any attempts to write
a single byte to the PCI configuration registers useless.

This problem does not exist for write_config_word() nor write_config_dword().

This problem has been there since kernel v2.6.17 and is still there
as of kernel v2.6.19.1.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Quick and dirty fix for build errors on SEAD.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pass "irq" to __DO_IRQ_SMTC_HOOK() macro.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Implement optimized asm version of csum_partial_copy_nocheck,
csum_partial_copy_from_user and csum_and_copy_to_user which can do
calculate and copy in parallel, based on memcpy.S.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Current sched_clock() implementations on ARM cause unbootable kernels
with PRINTK_TIME support enabled.  To avoid this, provide a basic
printk_clock() implementation which avoids sched_clock() being called
before the page tables have been set up.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

fuse does not work on ARM due to cache incoherency issues - fuse wants
to use get_user_pages() to copy data from the current process into
kernel space.  However, since this accesses userspace via the kernel
mapping, the kernel mapping can be out of date wrt data written to
userspace.

This can lead to unpredictable behaviour (in the case of fuse) or data
corruption for direct-IO.

This resolves debian bug #402876
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since get_user_pages() may be used with processes other than the
current process and calls flush_anon_page(), flush_anon_page() has to
cope in some way with non-current processes.

It may not be appropriate, or even desirable to flush a region of
virtual memory cache in the current process when that is different to
the process that we want the flush to occur for.

Therefore, pass the vma into flush_anon_page() so that the architecture
can work out whether the 'vmaddr' is for the current process or not.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The MMCI driver might end up aborting the initial command and leaving
the data part of the command sequence still in place.  Avoid this
problem by ensuring that any data sequence is properly cleared out
when a command completes.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If the kernel attempts to execute a CP1 or CP2 instruction and it
aborts, and a FP emulator is not loaded, we try to return as if to
a user context, instead of the proper kernel context.  Since the
fault came from kernel mode, we must use the kernel return paths.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This reverts commit 59287c09.

Hugh Dickins reports that it causes random failures on x86 with SuSE
10.2, and points out

  "Isn't that randomization, anywhere from 0x10000 to ELF_ET_DYN_BASE,
   sure to place the ET_DYN from time to time just where the comment
   says it's trying to avoid? I assume that somehow results in the error
   reported."

(where the comment in question is the existing comment in the source
code about mmap/brk clashes).
Suggested-by: NHugh Dickins <hugh@veritas.com>
Acked-by: NMarcus Meissner <meissner@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

iop33x gpio offset is correct in include/asm-arm/arch-iop33x/iop33x.h, but
include/asm-arm/hardware/iop3xx.h adds 4.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Include <asm/io.h> to fix the warning:

arch/arm/kernel/traps.c:647:6: warning: symbol '__readwrite_bug' was not declared. Should it be static?

Include <linux/mc146818rtc.h> to fix the warning:
arch/arm/kernel/time.c:42:1: warning: symbol 'rtc_lock' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  [PATCH] Driver core: Fix prefix driver links in /sys/module by bus-name

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  [PATCH] PCI: disable PCI_MULTITHREAD_PROBE

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: asix: Fix AX88772 device PHY selection
  USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printers
  sisusb_con warning fixes
  USB: Fixed bug in endpoint release function.
  USB: small update to Documentation/usb/acm.txt
  USB storage: fix ipod ejecting issue
  USB Storage: unusual_devs: add supertop drives
  USB: omap_udc build fixes (sync with linux-omap)
  USB: funsoft is borken on sparc
  USB: fix interaction between different interfaces in an "Option" usb device
  UHCI: support device_may_wakeup
  UHCI: make test for ASUS motherboard more specific

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/m41t00: Do not forget to write year
  i2c-mv64xxx: Fix random oops at boot
  i2c: Migration aids for i2c_adapter.dev removal
  i2c-pnx: Add entry to MAINTAINERS
  i2c-pnx: Fix interrupt handler, get rid of EARLY config option

On ia64, the various functions that make up cn_proc.c cause kernel
unaligned access errors.

If you are using these, for example, to get notification about all tasks
forking and exiting, you get multiple unaligned access errors per process.

Use put_unaligned() in the appropriate palces to fix this.
Signed-off-by: NErik Jacobson <erikj@sgi.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

At the end of shrink_all_memory() we forget to recalculate lru_pages: it can
be zero.

Fix that up, and add a helper function for this operation too.

Also, recalculate lru_pages each time around the inner loop to get the
balancing correct.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Looks like this is the problem, which point Al Viro some time ago:

ufs's get_block callback allocates 16k of disk at a time, and links that
entire 16k into the file's metadata.  But because get_block is called for only
a single buffer_head (a 2k buffer_head in this case?) we are only able to tell
the VFS that this 2k is buffer_new().

So when ufs_getfrag_block() is later called to map some more data in the file,
and when that data resides within the remaining 14k of this fragment,
ufs_getfrag_block() will incorrectly return a !buffer_new() buffer_head.

I don't see _right_ way to do nullification of whole block, if use inode
page cache, some pages may be outside of inode limits (inode size), and
will be lost; if use blockdev page cache it is possible to zero real data,
if later inode page cache will be used.

The simpliest way, as can I see usage of block device page cache, but not only
mark dirty, but also sync it during "nullification".  I use my simple tests
collection, which I used for check that create,open,write,read,close works on
ufs, and I see that this patch makes ufs code 18% slower then before.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These days, if you swapoff when there isn't enough memory, OOM killer gives
"BUG: scheduling while atomic" and the machine hangs: badness() needs to do
its PF_SWAPOFF return after the task_unlock (tasklist_lock is also held
here, so p isn't going to be freed: PF_SWAPOFF might get turned off at any
moment, but that doesn't really matter).
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

write_lcd() in toshiba_acpi returns 0 on success since the big ACPI patch
merged in 2.6.20-rc2.  It should return count.
Signed-off-by: NMatthijs van Otterdijk <thotter@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

qconf may cause SIGSEGV by trying to show debug information on empty menu
items
Signed-off-by: NCyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>