With AVI infoframe various parameters of video stream such as
aspect ratio, quantization range, videocode etc will be indicated
from source to sink.Thus AVI information needs to be set/accessed
by the middle ware based on the video content.
Thus this parameter is now moved to the ip_data structure.
Signed-off-by: NMythri P K <mythripk@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This patch adds support for Innolux AT080TN52 800x600 panel.
Tested with AM3517 based board.
Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The calculation of required DISPC_FCLK for downscaling is done by multplying the
pixel clock with an integer factor. This isn't true for OMAP4 where the required
clock is calculated using the exact ratio of downscaling done.

Fix this calculation for OMAP4. Also, do a minor clean up of calc_fclk().
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The number of dss_feat_id members has increased to a large value, the current
way of assigning a subset of these features (for a particular OMAP) as a mask
is no longer feasible.

Maintain the subset of features supported as lists. Make the function
dss_has_feature() traverse through this list.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Now that dss is using devm_ functions for allocation in probe functions,
small reordering of the allocations allows us to clean up the probe
functions more.

This patch moves "unmanaged" allocations after the managed ones, and
uses plain returns instead of gotos where possible. This lets us remove
a bunch of goto labels, simplifying the probe's error handling.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

When a PMIC is not found, this driver is unable to obtain its
'vdds_dsi_reg' regulator.  Even through its initialization function
fails, other code still calls its enable function, which fails to
check whether it has this regulator before asking for it to be enabled.

This fixes the oops, however a better fix would be to sort out the
upper layers to prevent them calling into a module which failed to
initialize.

Unable to handle kernel NULL pointer dereference at virtual address 00000038
pgd = c0004000
[00000038] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT
Modules linked in:
CPU: 0    Not tainted  (3.3.0-rc2+ #228)
PC is at regulator_enable+0x10/0x70
LR is at omapdss_dpi_display_enable+0x54/0x15c
pc : [<c01b9a08>]    lr : [<c01af994>]    psr: 60000013
sp : c181fd90  ip : c181fdb0  fp : c181fdac
r10: c042eff0  r9 : 00000060  r8 : c044a164
r7 : c042c0e4  r6 : c042bd60  r5 : 00000000  r4 : c042bd60
r3 : c084de48  r2 : c181e000  r1 : c042bd60  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80004019  DAC: 00000015
Process swapper (pid: 1, stack limit = 0xc181e2e8)
Stack: (0xc181fd90 to 0xc1820000)
fd80:                                     c001754c c042bd60 00000000 c042bd60
fda0: c181fdcc c181fdb0 c01af994 c01b9a04 c0016104 c042bd60 c042bd60 c044a338
fdc0: c181fdec c181fdd0 c01b5ed0 c01af94c c042bd60 c042bd60 c1aa8000 c1aa8a0c
fde0: c181fe04 c181fdf0 c01b5f54 c01b5ea8 c02fc18c c042bd60 c181fe3c c181fe08
fe00: c01b2a18 c01b5f48 c01aed14 c02fc160 c01df8ec 00000002 c042bd60 00000003
fe20: c042bd60 c1aa8000 c1aa8a0c c042eff8 c181fe84 c181fe40 c01b3874 c01b29fc
fe40: c042eff8 00000000 c042f000 c0449db8 c044ed78 00000000 c181fe74 c042eff8
fe60: c042eff8 c0449db8 c0449db8 c044ed78 00000000 00000000 c181fe94 c181fe88
fe80: c01e452c c01b35e8 c181feb4 c181fe98 c01e2fdc c01e4518 c042eff8 c0449db8
fea0: c0449db8 c181fef0 c181fecc c181feb8 c01e3104 c01e2f48 c042eff8 c042f02c
fec0: c181feec c181fed0 c01e3190 c01e30c0 c01e311c 00000000 c01e311c c0449db8
fee0: c181ff14 c181fef0 c01e1998 c01e3128 c18330a8 c1892290 c04165e8 c0449db8
ff00: c0449db8 c1ab60c0 c181ff24 c181ff18 c01e2e28 c01e194c c181ff54 c181ff28
ff20: c01e2218 c01e2e14 c039afed c181ff38 c04165e8 c041660c c0449db8 00000013
ff40: 00000000 c03ffdb8 c181ff7c c181ff58 c01e384c c01e217c c181ff7c c04165e8
ff60: c041660c c003a37c 00000013 00000000 c181ff8c c181ff80 c01e488c c01e3790
ff80: c181ff9c c181ff90 c03ffdcc c01e484c c181ffdc c181ffa0 c0008798 c03ffdc4
ffa0: c181ffc4 c181ffb0 c0056440 c0187810 c003a37c c04165e8 c041660c c003a37c
ffc0: 00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03ea284 c0008708
ffe0: 00000000 c03ea208 00000000 c181fff8 c003a37c c03ea214 1073cec0 01f7ee08
Backtrace:
[<c01b99f8>] (regulator_enable+0x0/0x70) from [<c01af994>] (omapdss_dpi_display_enable+0x54/0x15c)
 r6:c042bd60 r5:00000000 r4:c042bd60
[<c01af940>] (omapdss_dpi_display_enable+0x0/0x15c) from [<c01b5ed0>] (generic_dpi_panel_power_on+0x34/0x78)
 r6:c044a338 r5:c042bd60 r4:c042bd60
[<c01b5e9c>] (generic_dpi_panel_power_on+0x0/0x78) from [<c01b5f54>] (generic_dpi_panel_enable+0x18/0x28)
 r7:c1aa8a0c r6:c1aa8000 r5:c042bd60 r4:c042bd60
[<c01b5f3c>] (generic_dpi_panel_enable+0x0/0x28) from [<c01b2a18>] (omapfb_init_display+0x28/0x150)
 r4:c042bd60
[<c01b29f0>] (omapfb_init_display+0x0/0x150) from [<c01b3874>] (omapfb_probe+0x298/0x318)
 r8:c042eff8 r7:c1aa8a0c r6:c1aa8000 r5:c042bd60 r4:00000003
[<c01b35dc>] (omapfb_probe+0x0/0x318) from [<c01e452c>] (platform_drv_probe+0x20/0x24)
[<c01e450c>] (platform_drv_probe+0x0/0x24) from [<c01e2fdc>] (really_probe+0xa0/0x178)
[<c01e2f3c>] (really_probe+0x0/0x178) from [<c01e3104>] (driver_probe_device+0x50/0x68)
 r7:c181fef0 r6:c0449db8 r5:c0449db8 r4:c042eff8
[<c01e30b4>] (driver_probe_device+0x0/0x68) from [<c01e3190>] (__driver_attach+0x74/0x98)
 r5:c042f02c r4:c042eff8
[<c01e311c>] (__driver_attach+0x0/0x98) from [<c01e1998>] (bus_for_each_dev+0x58/0x98)
 r6:c0449db8 r5:c01e311c r4:00000000
[<c01e1940>] (bus_for_each_dev+0x0/0x98) from [<c01e2e28>] (driver_attach+0x20/0x28)
 r7:c1ab60c0 r6:c0449db8 r5:c0449db8 r4:c04165e8
[<c01e2e08>] (driver_attach+0x0/0x28) from [<c01e2218>] (bus_add_driver+0xa8/0x22c)
[<c01e2170>] (bus_add_driver+0x0/0x22c) from [<c01e384c>] (driver_register+0xc8/0x154)
[<c01e3784>] (driver_register+0x0/0x154) from [<c01e488c>] (platform_driver_register+0x4c/0x60)
 r8:00000000 r7:00000013 r6:c003a37c r5:c041660c r4:c04165e8
[<c01e4840>] (platform_driver_register+0x0/0x60) from [<c03ffdcc>] (omapfb_init+0x14/0x34)
[<c03ffdb8>] (omapfb_init+0x0/0x34) from [<c0008798>] (do_one_initcall+0x9c/0x164)
[<c00086fc>] (do_one_initcall+0x0/0x164) from [<c03ea284>] (kernel_init+0x7c/0x120)
[<c03ea208>] (kernel_init+0x0/0x120) from [<c003a37c>] (do_exit+0x0/0x2d8)
 r5:c03ea208 r4:00000000
Code: e1a0c00d e92dd870 e24cb004 e24dd004 (e5906038)
---[ end trace 9e2474c2e193b223 ]---
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board
if the HDMI PHY is kept powered on when the cable is not connected.

This patch solves the problem by adding hot-plug-detection into the HDMI
IP driver. This is not a real HPD support in the sense that nobody else
than the IP driver gets to know about the HPD events, but is only meant
to fix the HW bug.

The strategy is simple: If the display device is turned off by the user,
the PHY power is set to OFF. When the display device is turned on by the
user, the PHY power is set either to LDOON or TXON, depending on whether
the HDMI cable is connected.

The reason to avoid PHY OFF when the display device is on, but the cable
is disconnected, is that when the PHY is turned OFF, the HDMI IP is not
"ticking" and thus the DISPC does not receive pixel clock from the HDMI
IP. This would, for example, prevent any VSYNCs from happening, and
would thus affect the users of omapdss. By using LDOON when the cable is
disconnected we'll avoid the HW bug, but keep the HDMI working as usual
from the user's point of view.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

omapdss doesn't work properly on system suspend. The problem seems to be
the fact that omapdss uses pm_runtime_put() functions when turning off
the hardware, and when system suspend is in process only sync versions
are allowed.

Using non-sync versions normally and sync versions when suspending would
need rather ugly hacks to convey the information of
suspending/not-suspending to different functions. Optimally the driver
wouldn't even need to care about this, and the PM layer would handle
syncing when suspend is in process.

This patch changes all omapdss's pm_runtime_put calls to
pm_runtime_put_sync. This fixes the suspend problem, and probably the
performance penalty of always using sync versions is negligible.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NKevin Hilman <khilman@ti.com>

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Commit ba02fa37 disabled the
venc driver registration on OMAP4. Since the driver never gets
probed/initialised your get a dereferenceed NULL pointer if you
try to get info from /sys/kernel/debug/omapdss/venc

Return info message about disabled venc if venc_dump_regs() gets called.
Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Due to changes in struct hdmi_config, the pixel clock has to be obtained
differently.

The pixel clock is needed to calculate the CTS value as defined in the
HDMI specification.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

code and mode parameters are already a part of the ip_data structure
so no need to keep the same parameters again in hdmi global structure.
Signed-off-by: NMythri P K <mythripk@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Change the timing match logic, Instead of the statically mapped method
to get the corresponding timings for a given code and mode, move to a
simpler array indexed method. It  will help to scale up to add more
timings when needed.
Signed-off-by: NMythri P K <mythripk@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add the vsync polarity, hsync polarity, interlace to hdmi_video_timings.
Remove the now duplicate structure hdmi_timings.
update the static table structure in HDMI with CEA/VESA code and mode.
Signed-off-by: NMythri P K <mythripk@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

video interface structure is a duplicate structure with parameters which are
already present in ip_data config structure, Thus removing the structure and
modifying corresponding code.
Signed-off-by: NMythri P K <mythripk@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Take fifo merge into use by implementing a rather naive fifo merge
threshold calculation: keep the low threshold always the same, but
increase the high threshold when fifo merge is used.

This should greatly increase the time between pixel data fetches from
SDRAM, as the usable fifo size is much larger. However, it probably
won't help for fifo underflows, as the low threshols is kept the same.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Move fifo threshold calculation into dispc.c, as the thresholds are
really dispc internal thing.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Fifo thresholds are calculated using bytes, but the debug print prints
values in buffer units. Change the prints to use bytes to be in line
with the calculations, and also to print in the same units on all OMAPs.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add fifo-merge support. This is done mainly in four functions:
mgr_enable/disable and ovl_enable/disable. These are the functions where
overlays are taken into and out of active use.

The process to enable and disable fifo-merge is not simple. We need to
do it in steps, waiting in between for certain settings to be taken into
use, and continuing after that. The reason for this is that fifo-merge
is a common thing for all managers/overlays, and its use must be
synchronized.

As an example, when we disable an overlay, we first set the overlay as
disabled, then wait until the overlay is actually disabled in the HW,
and only after that we may re-configure the fifos, possibly taking
fifo-merge into use.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add mechanism to set/unset the DISPC fifo-merge:

Add new fields to dss_data, fifo_merge and fifo_merge_dirty. These are
similar to the other info/dirty flags in ovl_priv_data and ovl_mgr_data,
but fifo merge is a common attribute to all managers and thus outside
the ovl_mgr_data.

The fifo-merge field is used in the dss_write_regs_common, which handles
writing the register.

dss_apply_fifo_merge() can be used to set/unset the fifo merge field in
the dss_data.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add feature flag for fifo merge. OMAP2 doesn't contain fifo merge, later
OMAPs do.

dispc_enable_fifomerge() checks for the flag when called, and gives a
WARN if fifo merge is being enabled when it is not supported.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

dd data for the OrtusTech COM43H4M10XTC display to the
generic_dpi_panel driver.

CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This patch adds support for Microtip Technologies' UMSH-8173MD 800x480
RGB TFT panel. Tested with an OMAP3 board.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
[tomi.valkeinen@ti.com: changed the panel name string]
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The function hdmi_audio_trigger is a callback used by ASoC to stop/start
HDMI audio. Also, it does not perform IP-specific configuration directly.
Hence, it should be placed in the general portion of the HDMI driver,
along with the other ASoC callbacks.

Also, make this function static.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

In order to separate clearly IP-specific code from general DSS code,
a function for OMAP4 audio enable is created. This function is
included in the HDMI IP ops to align with the current implementation
of the DSS HDMI driver. This function is to be used by the ASoC
HDMI audio codec.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

These functions require access to IP-secific data. However, it is not possible
to pass such data as a function argument as such functions have a specific
signature specified by ASoC. Instead, they will have access to the IP-specific
data by calling snd_soc_codec_get_drvdata. The codec driver data is set
at probe time.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Under the new DSS architecture for HDMI, there is a clear separation
between general DSS code and HDMI IP-specific data. Functions
that require access to the HDMI driver IP-specific data receive an
hdmi_ip_data structure. The ASoC codec require access to such
IP-specific data. Then, instead of accessing it directly, it will be
passed as codec driver data. This also helps to have a clear separation
between DSS and ASoC portions of the code.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Clock requirements for scaling in OMAP2, OMAP3 and OMAP4 are different. In
OMAP2 and OMAP3 the required clock rate is a function of pixel clock, vertical
downscale ratio and horizontal downscale ratio whereas in OMAP4 it is a
function of pixel clock and horizontal downscale ratio only. Selection of 3-tap
vs 5-tap coefficients depends on clock rate line buffer width in OMAP3 whereas
in OMAP4 it is independent of clock rate and line buffer width. In OMAP2 3-tap
for vertical and 5-tap for horizontal scaling is used. In OMAP4 5-tap is used
both for horizontal and vertical scaling for better performance. Also, the
number and width of line buffers differs in OMAP3 and OMAP4.

So, clock functions have been fined tuned for OMAP3 and support has been added
added for OMAP4. This code has been tested on OMAP2, OMAP3 and OMAP4, and
scaling issues due to clock errors have been resolved.
Signed-off-by: NChandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The FIR coefficients present in kernel are being updated to new coefficients
consisting of 24 coefficient tables, with 12 each for 3 tap and 5 tap scenario,
which are chosen on the basis of DISPC up/downsampling filters M value. M is
the inverse of low pass cut off frequency of the sampling filter. For vertical
scaling 3 tap or 5 tap tables are used based on the clock rate and width of
the line buffer whereas in OMAP2 3 tap is always used. For horizontal scaling
however 5 tap tables are always used.

New coefficients and the corresponding logic have been tested on OMAP2, OMAP3
and OMAP4. Horizontal and vertical scaling worked fine except for some 3 tap
vs 5 tap issue during vertical upscaling and clock failing issues which is
acknowledged in the next patch. Vertical upscaling was found to perform better
under 5 taps. The 24 coefficient tables have been moved to another file
dispc_coefs.c for proper maintainance.

This code is written based on code written by Lajos Molnar <lajos@ti.com> in
Android Kernel for scaling. Lajos Molnar <lajos@ti.com> had fine tuned the FIR
coefficient selection process and reduced outliness and blockiness around
images when upscaling more than 2 times.
Signed-off-by: NChandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

extra_info_update_ongoing() goes through all overlays, but doesn't check
if the overlay is connected to a manager. This leads to a crash whenever
an overlay has been detached.

Add a check to skip the non-connected overlays.
Reported-by: NRob Clark <rob@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Make PICODLP driver on OMAP2_DSS_DPI since it is the display interface it uses.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The display state parameter of omap_dss_device struct is not being set correctly
in the panel driver NEC panel driver panel-nec-nl8048hl11-01b.c. Set the correct
states in the panel's enable/disable/suspend/resume functions.

CC: Erik Gilling <konkers@android.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The clock names of DSI_PLL_HSDIV_DISPC and DSI_PLL_HSDIV_DSI was made
dynamic based on the current value of DISPC and DSI FCLK sources. This
doesn't need to be done since we are just interested in the clock names,
and not the current clock sources for DISPC and DSI FCLKs.

Use only the generic and omap specific names for the DSI PLL's HSDIV
clocks.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The functions dss_ovl_simple_check() and dss_mgr_simple_check() are not
really part of the apply mechanism, and can be moved to overlay.c and
manager.c.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The dispc's error handler tries to disable all outputs when OCP_ERR
happens. However, the code doesn't check if there actually is a display
on each particular output, nor if there's a driver for the display. This
may lead to NULL pointer reference.
Signed-off-by: NRob Clark <rob@ti.com>
[tomi.valkeinen@ti.com: added patch description]
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The functions dss_ovl_check, dss_mgr_check_zorder, dss_mgr_check in
apply.c are not really part of the apply mechanism, and can be moved to
overlay.c and manager.c.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

dss_mgr_check_zorder() has two unused variables. Remove them.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
	.driver = {
-		.bus = &spi_bus_type,
	},
};
// </smpl>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Current code will always write fifo threshold values to the register,
even if they are the same as previously. Separate the setting of fifo
fields into a separate function, and only set new values if they are
different than the old ones.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>