- 22 5月, 2008 40 次提交
-
-
由 Tomas Winkler 提交于
The patch cleans up 4965 remaings from iwl-eeprom.c file. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch adds WiFi/WiMax coexistence to iwl5000. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch adds all the handlers and functions needed for ucode initialization flow. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch adds ucode initialization handler and functions to load ucode for iwl5000 NIC. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch adds rx_handler_setup stub to iwl5000. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch moves iwl4965_txq_ctx_activate and iwl4965_txq_ctx_deactivate to iwl-dev.h and removes 4965 prefix from their names. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch cleans up code in security. 1) uses the new pointer to ieee80211_key_conf passed with the tx_control. 2) resolves bug reported by Mirco Tischler (sends ADD_STA in ASYNC mode) 3) resolves bug reported by Volker Braun regarding dynamic WEP 4) drops a WEP packet which has been garbaged by firmware. This can happen upon rekeying. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch fixes SGI support. RS didn't look at the capabilities of the AP before switching to SGI, this should lead to a stall in the traffic with an AP that doesn't support SGI. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NGuy Cohen <guy.cohen@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch moves the sending part of the TX code into iwl-tx.c including sending host commands. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch refactors ieee80211_get_qos_ctrl function and its usage in iwlwifi drivers. Function is moved as inline into iwl-helpers.h. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames iwl4965_tx_cmd to iwl_tx_cmd and cleans collateral code. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch moves station management functions into iwl-sta.c (iwlcore). Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames iwl4965_broadcast_addr to iwl_bcast_addr and moves it to iwlcore. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes 4965 from iwl4965_rate_info structure and associated variables. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes 4965 from iwl4965_frame struct and handling functions. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames iwl4965_tx_queue_update_write_ptr to iwl_txq_update_write_ptr. This is a preparation for moving to iwl-tx.c. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gregory Greenman 提交于
This patch introduces a new handler get_hw_cmd_size in hcmd_utils, which should adjust the size of the command sent to the microcode according to the current nic. It also changes the RXON flow to make usage of this new handler. The patch also adds iwl_rxon_cmd structure which is supperset for 5000 HW and 4965. Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames iwl4965_tx_info to iwl_tx_info. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames iwl4965_queue to iwl_queue. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch fills the needed data about HW capabilities in matters of possible HT Tx MCS. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch follows the 11n spec in separation between Tx and Rx MCS capabilities. Up until now, when configuring the HT possible set of Tx MCS only Rx MCS were considered, assuming they are the same as the Tx MCS. This patch fixed this by looking at low level driver Tx capabilities. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch moves the contant of iwl4965_nic_start to the only place it is being used. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch changes an old eeprom comment in probe flow. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Replace the existing macro with a static function, significantly shrinks the size of the produced object file. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Replace private implementation of bit rotation and unaligned access helpers with kernel-provided implementation. Fold xswap helper in its one usage in the michael_block macro. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
[PATCH, take 2] libertas: reduce command retry time In the normal case, an unsuccessful command would be retried for 10*5 seconds, or 10*10 seconds in the worst case. This patch reduces this to 3*3 seconds, or 3*10 seconds in the worst case. I also reduced the time it takes to start a new command downloaded. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
There are already two places, that kfree the mesh_table and its buckets. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
This is the first (of two) clean ups after the fixes above. The err variable is not even required after this cleaning. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
In case the hash grow failed, it is not fair to return error - the new node _was_ _actually_ added in this case. Besides, after my previous patch, this grow is more likely to fail on large hashes. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
The mesh_path_node_copy() can be called like this: mesh_path_add `- write_lock(&pathtbl_resize_lock); /* ! */ `- mesh_table_grow `- ->copy_node `- mesh_path_node_copy thus, the GFP_KERNEL is not suitable here. The acceptable fix, I suppose, is make this allocation GPF_ATOMIC - the mpath_node being allocated is 4 pointers, i.e. this allocation is small enough to survive even under a moderate memory pressure. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
Now - return the -ENOMEM in case kmalloc fails. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
The mesh_path_node_copy() performs kmalloc() and thus - may fail (well, it does not now, but I'm fixing this right now). Its caller - the mesh_table_grow() - isn't prepared for such a trick yet. This preparation is just flush the new hash and make copy_node() return an int value. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
(This set applies OK without the previous one of 4 patches, but with some fuzz in the 7th one) The mesh_path_node_free() does so under hashwlock. But, this one is called 1. from mesh_path_add() after an old hash is hidden and synchronize_rcu() is calld 2. mesh_pathtbl_unregister(), when the module is being unloaded and no devices exist to mess with this hash. So, it seems to me, that simply removing the call is OK. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
There are already tree paths, that do incremental rollbacks, so merge them together, rename labels and format the code to look a bit nicer. (I do not mind dropping/delaying this patch however). Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Javier Cardona 提交于
This will create the following entry: /sys/class/net/mshX -- boot_options | |-- ... | `-- channel ... ... which I overlooked on my previous patch. Signed-off-by: NJavier Cardona <javier@cozybit.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-