- 01 2月, 2008 40 次提交
-
-
由 Vasily Khoruzhick 提交于
Codec with id 11c1:1040 sitting on hda bus isn't si3054-compatible. It should be removed from patch_si3054.c id list. The detailed information http://archives.linmodems.org/26457 From: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Some machines with STAC codecs seem to have problems (e.g. no audible playback) when the delay in codec-read routine is too short. I still don't figure out which command sequence causes this problem (due to lack of test hardware), but it's known that increasing the delay fixes. So, added a stupid workaround here temporarily... Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Andreas Degert 提交于
This device has io_type == 1 (Multiface) and firmware_rev > 0xa (fixes regression from changeset 5326) Signed-off-by: NAndreas Degert <ad@papyrus-gmbh.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 T. H. Huth 提交于
This patch provides the snd-powermac sound driver with the ability to handle dead DMA transfers. If a dead DMA transfer is detected, the driver now sets up a new DMA transfer to continue with the sound output at the point where the old transfer died. This dead DMA transfer handling has become necessary with recent kernels on certain G4 PowerMacs. Please refer to the following URLs for more information: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3126 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/87652 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=436723 The patch is based on the dead DMA transfer handling code from the old dmasound driver which can be found in the file sound/oss/dmasound/dmasound_awacs.c in the Linux source code. Signed-off-by: NT. H. Huth <th.huth@googlemail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Randy Dunlap 提交于
Fix section mismatch in caiaq: these __devinit functions can be called at any time so they should not be __devinit. WARNING: vmlinux.o(.text+0x10a8dae): Section mismatch: reference to .init.text:snd_usb_caiaq_audio_init (between 'setup_card' and 'create_card') WARNING: vmlinux.o(.text+0x10a8dd6): Section mismatch: reference to .init.text:snd_usb_caiaq_midi_init (between 'setup_card' and 'create_card') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Randy Dunlap 提交于
Fix section mismatch in hdsp: snd_hdsp_proc_init() can be called from an ioctl at any time. WARNING: vmlinux.o(.text+0x1089bc2): Section mismatch: reference to .init.text: (between 'snd_hdsp_create_alsa_devices' and 'snd_hdsp_free') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Randy Dunlap 提交于
Fix section mismatch in atiixp by making some functions __devinit. WARNING: vmlinux.o(.text+0xfd9304): Section mismatch: reference to .init.data:atiixp_quirks (between 'ac97_probing_bugs' and 'snd_atiixp_codec_detect') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Randy Dunlap 提交于
Fix section mismatch in ad1889 by renaming the pci_driver variable to a whitelisted variable name. WARNING: vmlinux.o(.data+0x2e5ff0): Section mismatch: reference to .init.text:snd_ad1889_probe (between 'ad1889_pci' and 'index') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Randy Dunlap 提交于
Fix section mismatches in mts64 by making a static variable __devinitdata. WARNING: vmlinux.o(.data+0x2e33f0): Section mismatch: reference to .init.data:mts64_ctl_smpte_switch (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e33f8): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_hours (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3400): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_minutes (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3408): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_seconds (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3410): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_frames (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3418): Section mismatch: reference to .init.data:mts64_ctl_smpte_fps (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Add a callback to the model structure to allow modification of the hardware PCM limits. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Allow the models to modify mixer controls before they are added to the card. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Allow the card models to specify whether each of the hardware DMA channels is used. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Add a field to the model structure so that it is possible to have a card where the SPI outputs 4 and 5 are used for an EEPROM. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Only initialize and create mixer controls for the first AC97 codec when one has actually been detected. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Enable the SPDIF input-pin on VIA codecs when SPDIF-input is enabled by BIOS. Also, including a bit code clean up. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Added the support of Dell OEM laptops (Vostro 1200) with ALC268 codec. The new model=dell is provided. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
It turned out that the PCBEEP element (0x1d) is disabled on some hardwares although it's defined in the datasheet. Because of the error at info of this element, the mixer gets totally unusable. Since the PCBEEP isn't that important feature, it's safer to disable this. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
There are two similar GPIO-enablement codes in patch_sigmatel.c. Let's clean up. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Tobin Davis 提交于
This patch removes hardcoded values for the number of streams supported by the southbridge in most chipsets, and reads these values from the chipset directly. Most systems are hardwired for 4 streams in each direction, but newer chipsets change that capability. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Rename the 'PCM Playback Volume'/'Switch' mixer controls to 'Master'. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Krzysztof Helt 提交于
This busy_wait is not needed after latest changes to the cs4231-lib Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
The line input cannot be mixed with the other inputs, so we have to mute the other input switches when it is selected. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Use an array for the pointers to known controls so that it is easier to add more. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Do not exchange the surround and back jacks except when in 7.1 mode where the surround jack is not rear but side. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Miguel Boton 提交于
'snd_shutdown_f_ops' is not a pointer so its address will never be NULL. GCC will complain because 'fops_get' will do an unnecessary check because '&snd_shutdown_f_ops' is always true. Signed-off-by: NMiguel Boton <mboton@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Removed 'FIXME' comments that have been already fixed. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Claudio Matsuoka 提交于
This patch fixes 5.1 surround output and headphone detection in the Dell Inspiron 530 and possibly other Dell systems using the ALC888 codec (mode 6stack-dell). Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Andrew Paprocki 提交于
Fixes multiple device support by incrementing the static device counter at the end of the azx_probe() call. Without this, subsequent probes would always use the index specified for the first card. Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Timur Tabi 提交于
Add the ASoC drivers for the Freescale MPC8610 SoC and the MPC8610 HPCD reference board. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The ALC auto-probe creates mic boost controls automatically for the probed pins, but it assumes that they are analog mics. The digital mics have no boost controls and must be skipped. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Print the name of the defect controls in error messages in amp info callback. This will make debugging easier. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Matthew Ranostay 提交于
Added a new STAC 9205 quirk for Vostro 1500. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jaroslav Kysela 提交于
Change semantics for SNDRV_PCM_TSTAMP_MMAP. Doing timestamping only in the interrupt handler might cause that hw_ptr is not related to actual timestamp. With this change, grab timestamp at every hw_ptr update to have always valid timestamp + ring buffer position pair. With this change, SNDRV_PCM_TSTAMP_MMAP was renamed to SNDRV_PCM_TSTAMP_ENABLE. It's no regression (I think). Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Matthew Ranostay 提交于
Added support for advanced power management support for output ports on 92HD7xxx family of codecs. Inactive output ports are powered down when the pin sense doesn't detect a connection, and powered back up when a connection is sensed. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Added helper functions to implement virtual master volume controls. The virtual master control is a control element that has multiple slave controls. The value of master element is equally added to slave elements. The functions are written for general purpose, but it's put in the HD-audio directory as now, since HD-audio driver is the only user. It should be moved to the common place once after other drivers use vmaster. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Ian Molton 提交于
Currently only the AUX channel is used (touchscreen) Signed-off-by: NIan Molton <spyro@f2s.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Ben Dooks 提交于
Support for suspend/resume for the S3C2412 ASoC IIS core driver. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Ben Dooks 提交于
S3C2412 SoC IIS support for ALSA/ASoC Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Graeme Gregory 提交于
Signed-off-by: NGraeme Gregory <graeme@openmoko.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-