- 11 10月, 2012 24 次提交
-
-
由 Al Cooper 提交于
The PCI (Program Counter Interrupt) bit in the "cause" register is mandatory for MIPS32R2 cores, but has also been added to some R1 cores (BMIPS5000). This change adds a cpu feature bit to make it easier to check for and use this feature. Signed-off-by: NAl Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4106/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Al Cooper 提交于
Change the indicator from 0xffffffff in the "event_id" member to zero in the "cntr_mask" member. This removes the need to initialize entries that are unsupported. This also solves a problem where the number of entries in the table was increased based on a globel enum used for all platforms, but the new unsupported entries were not added for mips. This was leaving new table entries of all zeros that we not marked UNSUPPORTED. Signed-off-by: NAl Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4110/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
We can save an instruction in the TLB Refill path for kernel mappings by aligning swapper_pg_dir on a 64K boundary. The address of swapper_pg_dir can be generated with a single LUI instead of LUI/{D}ADDUI. The alignment of __init_end is bumped up to 64K so there are no holes between it and swapper_pg_dir, which is placed at the very beginning of .bss. The alignment of invalid_pmd_table and invalid_pte_table can be relaxed to PAGE_SIZE. We do this by using __page_aligned_bss, which has the added benefit of eliminating alignment holes in .bss. Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org, Cc: linux-kernel@vger.kernel.org Acked-by: NArnd Bergmann <arnd@arndb.de> Patchwork: https://patchwork.linux-mips.org/patch/4220/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Follow-on MIPS patch will put an object here that needs 64K alignment to minimize padding. For those architectures that don't define BSS_FIRST_SECTIONS, there is no change. Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org, Cc: linux-kernel@vger.kernel.org Acked-by: NArnd Bergmann <arnd@arndb.de> Patchwork: https://patchwork.linux-mips.org/patch/4221/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joshua Kinard 提交于
I've maintained this patch, originally from Thiemo Seufer in 2004, for a really long time, but I think it's time for it to get a look at for possible inclusion. I have had no problems with it across various SGI systems over the years. To quote the post here: http://www.linux-mips.org/archives/linux-mips/2004-12/msg00000.html "the atomic functions use so far memory references for the inline assembler to access the semaphore. This can lead to additional instructions in the ll/sc loop, because newer compilers don't expand the memory reference any more but leave it to the assembler. The appended patch uses registers instead, and makes the ll/sc arguments more explicit. In some cases it will lead also to better register scheduling because the register isn't bound to an output any more." Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4029/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.pengutronix.de/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
-
由 Ian Kent 提交于
In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING mount pending flag is not cleared. One effect of this is when using the "browse" option, directory entry attributes show up with all "?"s due to the incorrect callback and subsequent failure return (when in fact no callback should be made). Signed-off-by: NIan Kent <ikent@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "Followups, fixes and some random stuff I found on the internet." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (11 patches) perf: fix duplicate header inclusion memcg, kmem: fix build error when CONFIG_INET is disabled rtc: kconfig: fix RTC_INTF defaults connected to RTC_CLASS rapidio: fix comment lib/kasprintf.c: use kmalloc_track_caller() to get accurate traces for kvasprintf rapidio: update for destination ID allocation rapidio: update asynchronous discovery initialization rapidio: use msleep in discovery wait mm: compaction: fix bit ranges in {get,clear,set}_pageblock_skip() arch/powerpc/platforms/pseries/hotplug-memory.c: section removal cleanups arch/powerpc/platforms/pseries/hotplug-memory.c: fix section handling code
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block IO update from Jens Axboe: "Core block IO bits for 3.7. Not a huge round this time, it contains: - First series from Kent cleaning up and generalizing bio allocation and freeing. - WRITE_SAME support from Martin. - Mikulas patches to prevent O_DIRECT crashes when someone changes the block size of a device. - Make bio_split() work on data-less bio's (like trim/discards). - A few other minor fixups." Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew Morton. It is due to the VM no longer using a prio-tree (see commit 6b2dbba8: "mm: replace vma prio_tree with an interval tree"). So make set_blocksize() use mapping_mapped() instead of open-coding the internal VM knowledge that has changed. * 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits) block: makes bio_split support bio without data scatterlist: refactor the sg_nents scatterlist: add sg_nents fs: fix include/percpu-rwsem.h export error percpu-rw-semaphore: fix documentation typos fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared blockdev: turn a rw semaphore into a percpu rw semaphore Fix a crash when block device is read and block size is changed at the same time block: fix request_queue->flags initialization block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue() block: ioctl to zero block ranges block: Make blkdev_issue_zeroout use WRITE SAME block: Implement support for WRITE SAME block: Consolidate command flag and queue limit checks for merges block: Clean up special command handling logic block/blk-tag.c: Remove useless kfree block: remove the duplicated setting for congestion_threshold block: reject invalid queue attribute values block: Add bio_clone_bioset(), bio_clone_kmalloc() block: Consolidate bio_alloc_bioset(), bio_kmalloc() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull a firewire fix from Stefan Richter: "Fixes an old bug of the /dev/fw* ioctl ABI." * tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull vfio fixes from Alex Williamson: "This includes a fix for PCI BAR mmaps after recent mm changes, fixing an interrupt race, and fixing a consistency bug in interrupt state when switching interrupt modes." * tag 'vfio-for-v3.7-rc1' of git://github.com/awilliam/linux-vfio: vfio: Fix PCI INTx disable consistency vfio: Move PCI INTx eventfd setting earlier vfio: Fix PCI mmap after b3b9c293
-
由 Michel Lespinasse 提交于
#include <stdbool.h> somehow got duplicated on its way to linus's tree (probably as a conflict resolution as things got sent through multiple trees) Signed-off-by: NMichel Lespinasse <walken@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Commit e1aab161 ("socket: initial cgroup code.") causes a build error when CONFIG_INET is disabled in Linus' tree: net/built-in.o: In function `sk_update_clone': net/core/sock.c:1336: undefined reference to `sock_update_memcg' sock_update_memcg() is only defined when CONFIG_INET is enabled, so fix it by defining the dummy function without this option. Signed-off-by: NDavid Rientjes <rientjes@google.com> Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kevin Hilman 提交于
Commit 6b8029fa ("rtc: kconfig: remove unnecessary dependencies") removed various 'depends on RTC_CLASS' dependencies but also removed a few 'default RTC_CLASS' statements, which actually changed default behavior. This resulted in the various RTC interfaces (sysfs, proc, dev) all being disabled by default, even when RTC_CLASS is enabled: # CONFIG_RTC_INTF_SYSFS is not set # CONFIG_RTC_INTF_PROC is not set # CONFIG_RTC_INTF_DEV is not set which is different from previous behavior (all of these where enabled.) To fix, add back the 'default RTC_CLASS' statments to each of the RTC_INTF_* options. I noticed this because some RTC tests started failing on my TI OMAP platforms because /dev/rtc0 was not present anymore, even though the driver was present and RTC_CLASS was enabled. Signed-off-by: NKevin Hilman <khilman@ti.com> Acked-by: NVenu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chad Reese 提交于
The resource index for the mailboxes was incorrect. Signed-off-by: NChad Reese <kreese@caviumnetworks.com> Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ezequiel Garcia 提交于
Previously kvasprintf() allocation was being done through kmalloc(), thus producing an inaccurate trace report. This is a common problem: in order to get accurate callsite tracing, a lib/utils function shouldn't allocate kmalloc but instead use kmalloc_track_caller. Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Address comments provided by Andrew Morton: https://lkml.org/lkml/2012/10/3/550 - Keeps consistent kerneldoc compatible comments style for new static functions. - Removes unnecessary complexity from destination ID allocation routine. - Uses kcalloc() for code clarity. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Update discovery process initialization based on Andrew Morton's comments: https://lkml.org/lkml/2012/10/3/552. This update processes all enumerating mports first and schedules discovery work after that. If the initialization routine fails to allocate resources needed to execute discovery, it abandons discovery for all ports. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Use msleep() for code clarity as suggested by Andrew Morton in his comments for the original patch: https://lkml.org/lkml/2012/10/3/546. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
{get,clear,set}_pageblock_skip() use incorrect bit ranges (please compare to bit ranges used by {get,set}_pageblock_flags() used for migration types) and can overwrite pageblock migratetype of the next pageblock in the bitmap. Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NMel Gorman <mgorman@suse.de> Tested-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yasuaki Ishimatsu 提交于
Followups to d760afd4 ("memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning"). - use unsigned long type, as overflows are conceivable - rename `i' to the less-misleading and more informative `section' Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Fix arch/powerpc/platforms/pseries/hotplug-memory.c: In function 'pseries_remove_memblock': arch/powerpc/platforms/pseries/hotplug-memory.c:103:17: error: unused variable 'pfn' [-Werror=unused-variable] Caused by commit d760afd4 ("memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning"). Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Tested-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Tested-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
Pull hwmon updates from Jean Delvare: "Only trivial things this time" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Drop needless includes of <linux/delay.h> hwmon: Add missing inclusions of <linux/err.h> hwmon: Add missing inclusions of <linux/jiffies.h> hwmon: Fix spelling of Celsius hwmon: Update Alexey Fisher's name
-
- 10 10月, 2012 16 次提交
-
-
由 Alex Williamson 提交于
The virq_disabled flag tracks the userspace view of INTx masking across interrupt mode changes, but we're not consistently applying this to the interrupt and masking handler notion of the device. Currently if the user sets DisINTx while in MSI or MSIX mode, then returns to INTx mode (ex. rebooting a qemu guest), the hardware has DisINTx+, but the management of INTx thinks it's enabled, making it impossible to actually clear DisINTx. Fix this by updating the handler state when INTx is re-enabled. Cc: stable@vger.kernel.org Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
由 Alex Williamson 提交于
We need to be ready to recieve an interrupt as soon as we call request_irq, so our eventfd context setting needs to be moved earlier. Without this, an interrupt from our device or one sharing the interrupt line can pass a NULL into eventfd_signal and oops. Cc: stable@vger.kernel.org Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
由 Alex Williamson 提交于
Our mmap path mistakely relied on vma->vm_pgoff to get set in remap_pfn_range. After b3b9c293, that path only applies to copy-on-write mappings. Set it in our own code. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Trond Myklebust: "Features include: - Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1 Aside from the issues discussed at the LKS, distros are shipping NFSv4.1 with all the trimmings. - Fix fdatasync()/fsync() for the corner case of a server reboot. - NFSv4 OPEN access fix: finally distinguish correctly between open-for-read and open-for-execute permissions in all situations. - Ensure that the TCP socket is closed when we're in CLOSE_WAIT - More idmapper bugfixes - Lots of pNFS bugfixes and cleanups to remove unnecessary state and make the code easier to read. - In cases where a pNFS read or write fails, allow the client to resume trying layoutgets after two minutes of read/write- through-mds. - More net namespace fixes to the NFSv4 callback code. - More net namespace fixes to the NFSv3 locking code. - More NFSv4 migration preparatory patches. Including patches to detect network trunking in both NFSv4 and NFSv4.1 - pNFS block updates to optimise LAYOUTGET calls." * tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (113 commits) pnfsblock: cleanup nfs4_blkdev_get NFS41: send real read size in layoutget NFS41: send real write size in layoutget NFS: track direct IO left bytes NFSv4.1: Cleanup ugliness in pnfs_layoutgets_blocked() NFSv4.1: Ensure that the layout sequence id stays 'close' to the current NFSv4.1: Deal with seqid wraparound in the pNFS return-on-close code NFSv4 set open access operation call flag in nfs4_init_opendata_res NFSv4.1: Remove the dependency on CONFIG_EXPERIMENTAL NFSv4 reduce attribute requests for open reclaim NFSv4: nfs4_open_done first must check that GETATTR decoded a file type NFSv4.1: Deal with wraparound when updating the layout "barrier" seqid NFSv4.1: Deal with wraparound issues when updating the layout stateid NFSv4.1: Always set the layout stateid if this is the first layoutget NFSv4.1: Fix another refcount issue in pnfs_find_alloc_layout NFSv4: don't put ACCESS in OPEN compound if O_EXCL NFSv4: don't check MAY_WRITE access bit in OPEN NFS: Set key construction data for the legacy upcall NFSv4.1: don't do two EXCHANGE_IDs on mount NFS: nfs41_walk_client_list(): re-lock before iterating ...
-
由 Jean Delvare 提交于
These drivers use no sleep or delay functions so they don't need to include <linux/delay.h>. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <linux@roeck-us.net> Cc: Rudolf Marek <r.marek@assembler.cz>
-
由 Jean Delvare 提交于
These drivers use IS_ERR so they should include <linux/err.h>. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NLuca Tettamanti <kronos.it@gmail.com> Cc: Henrik Rydberg <rydberg@euromail.se>
-
由 Jean Delvare 提交于
Many hwmon drivers use jiffies but omit the inclusion of the header file. Fix that, and also fix one driver which was including the header file but didn't need it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NLuca Tettamanti <kronos.it@gmail.com> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz>
-
由 Peter Meerwald 提交于
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Oleksij Rempel 提交于
My name was change after migration. Signed-off-by: NOleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
git://gitorious.org/linux-pwm/linux-pwm由 Linus Torvalds 提交于
Pull pwm changes from Thierry Reding: "All legacy PWM providers have now been moved to the PWM subsystem. The plan for 3.8 is to adapt all board files to provide a lookup table for PWM devices in order to get rid of the global namespace. Subsequently, users of the legacy pwm_request() and pwm_free() functions can be migrated to the new pwm_get() and pwm_put() functions. Once this has been completed, the legacy API and the compatibility code in the core can be removed. In addition to the above, these changes also add support for configuring the polarity of a PWM signal (currently only supported on ECAP and EHRPWM) and include a much needed rework of the i.MX driver. Managed functions to obtain and release a PWM device (devm_pwm_get() and devm_pwm_put()) have been added and the pwm-backlight driver has been updated to use them. If the PWM subsystem hasn't been enabled, dummy functions are provided that allow the subsystem to safely compile out. Some common checks on input parameters have been moved to the core and removed from the drivers. Finally, a small fix corrects the description of the PWM specifier's second cell in the device tree representation." * tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits) pwm: dt: Fix description of second PWM cell pwm: Check for negative duty-cycle and period pwm: Add Ingenic JZ4740 support MIPS: JZ4740: Export timer API pwm: Move PUV3 PWM driver to PWM framework unicore32: pwm: Use managed resource allocations unicore32: pwm: Remove unnecessary indirection unicore32: pwm: Use module_platform_driver() unicore32: pwm: Properly remap memory-mapped registers pwm-backlight: Use devm_pwm_get() instead of pwm_get() pwm: Move AB8500 PWM driver to PWM framework pwm: Fix compilation error when CONFIG_PWM is not defined pwm: i.MX: fix clock lookup pwm: i.MX: use per clock unconditionally pwm: i.MX: add devicetree support pwm: i.MX: Use module_platform_driver pwm: i.MX: add functions to enable/disable pwm. pwm: i.MX: remove unnecessary if in pwm_[en|dis]able pwm: i.MX: factor out SoC specific functions pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds由 Linus Torvalds 提交于
Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits) leds: add output driver configuration for pca9633 led driver leds: lm3642: Use regmap_update_bits() in lm3642_chip_init() leds: Add new LED driver for lm3642 chips leds-lp5523: Fix riskiness of the page fault leds-lp5523: turn off the LED engines on unloading the driver leds-lm3530: Fix smatch warnings leds-lm3530: Use devm_regulator_get function leds: leds-gpio: adopt pinctrl support leds: Add new LED driver for lm355x chips leds-lp5523: use the i2c device id rather than fixed name leds-lp5523: add new device id for LP55231 leds-lp5523: support new LP55231 device leds: triggers: send uevent when changing triggers leds-lp5523: minor code style fixes leds-lp5523: change the return type of lp5523_set_mode() leds-lp5523: set the brightness to 0 forcely on removing the driver leds-lp5523: add channel name in the platform data leds: leds-gpio: Use of_get_child_count() helper leds: leds-gpio: Use platform_{get,set}_drvdata leds: leds-gpio: use of_match_ptr() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull scsi target updates from Nicholas Bellinger: "Things have been calm for the most part with no new fabric drivers in flight for v3.7 (we're up to eight now !), so this update is primarily focused on addressing a few long-standing items within target-core and iscsi-target fabric code. The highlights include: - target: Simplify fabric sense data length handling (roland) - qla2xxx: Fix endianness of task management response code (roland) - target: fix truncation of mode data, support zero allocation length (paolo) - target: Properly support zero-length commands in normal processing path (paolo) - iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDU (ronnie + nab) - iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode (ronnie + nab) - target/file: Re-enable optional fd_buffered_io=1 operation (nab + hch) - iscsi-target: Add MaxXmitDataSegmenthLength forr target -> initiator MDRSL declaration (nab) - target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough (nab + hch) - tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch + nab) - tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab + hch) The last series for adding a new target_submit_cmd_map_sgls() fabric caller (as requested by hch) that accepts pre-allocated SGL memory (using existing logic), along with converting tcm_loop + tcm_vhost has only been in -next for the last days, but has gotten enough review +testing and is clear enough a mechanical change that I think it's reasonable to merge for -rc1 code. Thanks again to everyone who contributed this round! Extra special thanks to Roland (PureStorage) for tracking down the qla2xxx target TMR response code endian issue, and to Paolo (Redhat) for resolving the long standing zero-length CDB issues within target-core between virtual and pSCSI backends." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values iscsit: proper endianess conversions iscsit: use the itt_t abstract type iscsit: add missing endianess conversion in iscsit_check_inaddr_any iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp iscsit: mark various functions static target/iscsi: precedence bug in iscsit_set_dataout_sequence_values() target/usb-gadget: strlen() doesn't count the terminator target/usb-gadget: remove duplicate initialization tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls target: Add control CDB READ payload zero work-around tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength iscsi-target: Add MaxXmitDataSegmentLength connection recovery check iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength iscsi-target: Enable MaxXmitDataSegmentLength operation in login path iscsi-target: Add base MaxXmitDataSegmentLength code target/file: Re-enable optional fd_buffered_io=1 operation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull second s390 update from Martin Schwidefsky: "The big thing in this pull request is the UAPI patch from David, and worth mentioning is the page table dumper. The rest are small improvements and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/entry: fix svc number for TIF_SYSCALL system call restart s390/mm,vmem: fix vmem_add_mem()/vmem_remove_range() s390/vmalloc: have separate modules area s390/zcrypt: remove duplicated include from zcrypt_pcixcc.c s390/css_chars: remove superfluous ifdef s390/chsc: make headers usable s390/mm: let kernel text section always begin at 1MB s390/mm: fix mapping of read-only kernel text section s390/mm: add page table dumper s390: add support to start the kernel in 64 bit mode. s390/mm,pageattr: remove superfluous EXPORT_SYMBOLs s390/mm,pageattr: add more page table walk sanity checks s390/mm: fix pmd_huge() usage for kernel mapping s390/dcssblk: cleanup device attribute usage s390/mm: use pfmf instruction to initialize storage keys s390/facilities: cleanup PFMF and HPAGE machine facility detection UAPI: (Scripted) Disintegrate arch/s390/include/asm
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull nouveau drm fixes from Dave Airlie: "Just a bunch of nouveau fixes, Ben wants to get some alternate versions into stable." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/timer: bump ptimer's alarm delay from u32 to u64 drm/nouveau/fan: fix a typo in PWM's input clock calculation drm/nv50/clk: wire up pll_calc hook drm/nouveau: remove unused _nouveau_parent_ctor drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal由 Linus Torvalds 提交于
Pull generic execve() changes from Al Viro: "This introduces the generic kernel_thread() and kernel_execve() functions, and switches x86, arm, alpha, um and s390 over to them." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (26 commits) s390: convert to generic kernel_execve() s390: switch to generic kernel_thread() s390: fold kernel_thread_helper() into ret_from_fork() s390: fold execve_tail() into start_thread(), convert to generic sys_execve() um: switch to generic kernel_thread() x86, um/x86: switch to generic sys_execve and kernel_execve x86: split ret_from_fork alpha: introduce ret_from_kernel_execve(), switch to generic kernel_execve() alpha: switch to generic kernel_thread() alpha: switch to generic sys_execve() arm: get rid of execve wrapper, switch to generic execve() implementation arm: optimized current_pt_regs() arm: introduce ret_from_kernel_execve(), switch to generic kernel_execve() arm: split ret_from_fork, simplify kernel_thread() [based on patch by rmk] generic sys_execve() generic kernel_execve() new helper: current_pt_regs() preparation for generic kernel_thread() um: kill thread->forking um: let signal_delivered() do SIGTRAP on singlestepping into handler ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML changes from Richard Weinberger: "UML receives this time only cleanups. The most outstanding change is the 'include "foo.h"' do 'include <foo.h>' conversion done by Al Viro. It touches many files, that's why the diffstat is rather big." * 'for-linus-37rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: typo in UserModeLinux-HOWTO hppfs: fix the return value of get_inode() hostfs: drop vmtruncate um: get rid of pointless include "..." where include <...> will do um: move sysrq.h out of include/shared um/x86: merge 32 and 64 bit variants of ptrace.h um/x86: merge 32 and 64bit variants of checksum.h
-