Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 20 11月, 2007 1 次提交
  3. 08 11月, 2007 1 次提交
    • B
      [POWERPC] Fix cache line vs. block size confusion · 20474abd
      由 Benjamin Herrenschmidt 提交于 
      We had an historical confusion in the kernel between cache line
and cache block size. The former is an implementation detail of
the L1 cache which can be useful for performance optimisations,
the later is the actual size on which the cache control
instructions operate, which can be different.

For some reason, we had a weird hack reading the right property
on powermac and the wrong one on any other 64 bits (32 bits is
unaffected as it only uses the cputable for cache block size
infos at this stage).

This fixes the booting-without-of.txt documentation to mention
the right properties, and fixes the 64 bits initialization code
to look for the block size first, with a fallback to the line
size if the property is missing.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      20474abd
  5. 01 11月, 2007 1 次提交
  7. 11 10月, 2007 1 次提交
    • D
      Device tree aware EMAC driver · 1d3bb996
      由 David Gibson 提交于 
      Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs.  The
same ASIC is also found in the Axon bridge chip.  This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.

This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac).  The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).

This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging.  Specifically:
	- Should be adjusted to properly use the dma mapping API.
Axon needs this.
	- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices.  The dependencies here between
EMAC, MAL, ZMII etc. make this complicated.  At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      1d3bb996
  9. 08 10月, 2007 1 次提交
  11. 05 10月, 2007 2 次提交
    • S
      [POWERPC] cpm: Describe multi-user ram in its own device node. · 15f8c604
      由 Scott Wood 提交于 
      The way the current CPM binding describes available multi-user (a.k.a.
dual-ported) RAM doesn't work well when there are multiple free regions,
and it doesn't work at all if the region doesn't begin at the start of
the muram area (as the hardware needs to be programmed with offsets into
this area).  The latter situation can happen with SMC UARTs on CPM2, as its
parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't
support moving it.

It is now described with a muram node, similar to QE.  The current CPM
binding is sufficiently recent (i.e. never appeared in an official release)
that compatibility with existing device trees is not an issue.

The code supporting the new binding is shared between cpm1 and cpm2, rather
than remain separated.  QE should be able to use this code as well, once
minor fixes are made to its device trees.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      15f8c604
    • S
      [POWERPC] Document local bus nodes in the device tree, and update cuboot-pq2. · 96fca1de
      由 Scott Wood 提交于 
      The localbus node is used to describe devices that are connected via a chip
select or similar mechanism.  The advantages over placing the devices under
the root node are that it can be probed without probing other random things
under the root, and that the description of which chip select a given device
uses can be used to set up mappings if the firmware failed to do so in a
useful manner.

cuboot-pq2 is updated to match the binding; previously, it called itself
chipselect rather than localbus, and used phandle linkage between the
actual bus node and the control node (the current agreement is to simply use
the fully-qualified address of the control registers, and ignore the overlap
with the IMMR node).
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      96fca1de
  13. 04 10月, 2007 1 次提交
    • S
      [POWERPC] Introduce new CPM device bindings. · e631ae3b
      由 Scott Wood 提交于 
      This introduces a new device binding for the CPM and other devices on
these boards.  Some of the changes include:

1. Proper namespace scoping for Freescale compatibles and properties.

2. Use compatible rather than things like device_type and model
to determine which particular variant of a device is present.

3. Give the drivers the relevant CPM command word directly, rather than
requiring it to have a lookup table based on device-id, SCC v. SMC, and
CPM version.

4. Specify the CPCR and the usable DPRAM region in the CPM's reg property.

Boards that do not require the legacy bindings should select
CONFIG_PPC_CPM_NEW_BINDING to enable the of_platform CPM devices. Once
all existing boards are converted and tested, the config option can
become default y to prevent new boards from using the old model.  Once
arch/ppc is gone, the config option can be removed altogether.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      e631ae3b
  15. 13 9月, 2007 1 次提交
  17. 19 7月, 2007 1 次提交
  19. 03 7月, 2007 2 次提交
  21. 28 6月, 2007 1 次提交
    • D
      [POWERPC] In booting-without-of.txt, clarify that properties must precede subnodes · eff2ebd2
      由 David Gibson 提交于 
      A strict reading of the flattened device tree format defined in
booting-without-of.txt does in fact require that all the tags defining
properties for a node go before any definitions of subnodes, however
it's not particularly emphasised.  Although allowing intermingled
properties and subnodes would not be ambiguous in meaning, the kernel
parser does currently require that properties precede subnodes.
Furthermore, keeping this constraint makes life easier for various
device tree scanning tools.

Therefore, re-emphasise in booting-without-of.txt that this is a
strict requirement of the flattened device tree format.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      eff2ebd2
  23. 07 6月, 2007 2 次提交
  25. 09 5月, 2007 2 次提交
  27. 02 5月, 2007 1 次提交
  29. 27 4月, 2007 1 次提交
  31. 21 3月, 2007 1 次提交
  33. 16 3月, 2007 1 次提交
    • D
      [POWERPC] Update documentation for flat device tree format v17 · 0e0293c8
      由 David Gibson 提交于 
      This patch updates booting-without-of.txt to describe version 17 of
the flattened device tree format.  Version 17 is a small, backwards
compatible change from version 16, adding an extra field giving the
size of the device tree's structure block.  At this time, the kernel
has no use for the extra information, however its presence can make
life easier for bootloaders or other software manipulating the tree.

In addition this patch adds information on the size_dt_strings field
of the device tree header, present since version 3 of the flattened
tree format, but omitted from the documentation.  It also makes
changes to consistently refer to versions 16 and 17 as versions 16 and
17 in decimal, rather than version 0x10 which was occasionally used
for version 16 previously.

Finally, we also add the new field to the definition of the device
tree header structure in prom.h
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      0e0293c8
  35. 09 3月, 2007 1 次提交
  37. 08 3月, 2007 1 次提交
  39. 17 2月, 2007 1 次提交
  41. 16 2月, 2007 1 次提交
  43. 08 2月, 2007 1 次提交
  45. 20 12月, 2006 1 次提交
  47. 04 12月, 2006 1 次提交
  49. 30 11月, 2006 1 次提交
  51. 04 10月, 2006 8 次提交
  53. 30 8月, 2006 1 次提交
  55. 18 8月, 2006 1 次提交
  57. 04 7月, 2006 1 次提交