A helper for ovl_getattr() to map the values of st_dev and st_ino
according to constant st_ino rules.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

No need to mess with an alias, the upperdentry can be retrieved directly
from the overlay inode.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Certain properties in ovl_lookup_data should be set only for the last
element of the path. IOW, if we are calling ovl_lookup_single() for an
absolute redirect, then d->is_dir and d->opaque do not make much sense
for intermediate path elements. Instead set them only if dentry being
lookup is last path element.

As of now we do not seem to be making use of d->opaque if it is set for
a path/dentry in lower. But just define the semantics so that future code
can make use of this assumption.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

If we are looking in last layer, then there should not be any need to
process redirect. redirect information is used only for lookup in next
lower layer and there is no more lower layer to look into. So no need
to process redirects.

IOW, ignore redirects on lowest layer.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

When decoding a lower file handle, we need to check if lower file was
copied up and indexed and if it has a whiteout index, we need to check
if this is an unlinked but open non-dir before returning -ESTALE.

To find out if this is an unlinked but open non-dir we need to lookup
an overlay inode in inode cache by lower inode and that requires decoding
the lower file handle before looking in inode cache.

Before this change, if the lower inode turned out to be a directory, we
may have paid an expensive cost to reconnect that lower directory for
nothing.

After this change, we start by decoding a disconnected lower dentry and
using the lower inode for looking up an overlay inode in inode cache.
If we find overlay inode and dentry in cache, we avoid the index lookup
overhead. If we don't find an overlay inode and dentry in cache, then we
only need to decode a connected lower dentry in case the lower dentry is
a non-indexed directory.

The xfstests group overlay/exportfs tests decoding overlayfs file
handles after drop_caches with different states of the file at encode
and decode time. Overall the tests in the group call ovl_lower_fh_to_d()
89 times to decode a lower file handle.

Before this change, the tests called ovl_get_index_fh() 75 times and
reconnect_one() 61 times.
After this change, the tests call ovl_get_index_fh() 70 times and
reconnect_one() 59 times. The 2 cases where reconnect_one() was avoided
are cases where a non-upper directory file handle was encoded, then the
directory removed and then file handle was decoded.

To demonstrate the affect on decoding file handles with hot inode/dentry
cache, the drop_caches call in the tests was disabled. Without
drop_caches, there are no reconnect_one() calls at all before or after
the change. Before the change, there are 75 calls to ovl_get_index_fh(),
exactly as the case with drop_caches. After the change, there are only
10 calls to ovl_get_index_fh().
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

On lookup of non directory, we try to decode the origin file handle
stored in upper inode. The origin file handle is supposed to be decoded
to a disconnected non-dir dentry, which is fine, because we only need
the lower inode of a copy up origin.

However, if the origin file handle somehow turns out to be a directory
we pay the expensive cost of reconnecting the directory dentry, only to
get a mismatch file type and drop the dentry.

Optimize this case by explicitly opting out of reconnecting the dentry.
Opting-out of reconnect is done by passing a NULL acceptable callback
to exportfs_decode_fh().

While the case described above is a strange corner case that does not
really need to be optimized, the API added for this optimization will
be used by a following patch to optimize a more common case of decoding
an overlayfs file handle.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Rename ovl_encode_fh() to ovl_encode_real_fh() to differentiate from the
exportfs function ovl_encode_inode_fh() and change the latter to
ovl_encode_fh() to match the exportfs method name.

Rename ovl_decode_fh() to ovl_decode_real_fh() for consistency.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

For broken hardlinks, we do not return lower st_ino, so we should
also not return lower pseudo st_dev.

Fixes: a0c5ad30 ("ovl: relax same fs constraint for constant st_ino")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

As of now if we encounter an opaque dir while looking for a dentry, we set
d->last=true. This means that there is no need to look further in any of
the lower layers. This works fine as long as there are no redirets or
relative redircts. But what if there is an absolute redirect on the
children dentry of opaque directory. We still need to continue to look into
next lower layer. This patch fixes it.

Here is an example to demonstrate the issue. Say you have following setup.

upper:  /redirect (redirect=/a/b/c)
lower1: /a/[b]/c       ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo

Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d.
Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look
into lower0 because children c has an absolute redirect.

Following is a reproducer.

Watch me make foo disappear:

 $ mkdir lower middle upper work work2 merged
 $ mkdir lower/origin
 $ touch lower/origin/foo
 $ mount -t overlay none merged/ \
         -olowerdir=lower,upperdir=middle,workdir=work2
 $ mkdir merged/pure
 $ mv merged/origin merged/pure/redirect
 $ umount merged
 $ mount -t overlay none merged/ \
         -olowerdir=middle:lower,upperdir=upper,workdir=work
 $ mv merged/pure/redirect merged/redirect

Now you see foo inside a twice redirected merged dir:

 $ ls merged/redirect
 foo
 $ umount merged
 $ mount -t overlay none merged/ \
         -olowerdir=middle:lower,upperdir=upper,workdir=work

After mount cycle you don't see foo inside the same dir:

 $ ls merged/redirect

During middle layer lookup, the opaqueness of middle/pure is left in
the lookup state and then middle/pure/redirect is wrongly treated as
opaque.

Fixes: 02b69b28 ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

d->last signifies that this is the last layer we are looking into and there
is no more. And that means this allows for some optimzation opportunities
during lookup. For example, in ovl_lookup_single() we don't have to check
for opaque xattr of a directory is this is the last layer we are looking
into (d->last = true).

But knowing for sure whether we are looking into last layer can be very
tricky. If redirects are not enabled, then we can look at poe->numlower and
figure out if the lookup we are about to is last layer or not. But if
redircts are enabled then it is possible poe->numlower suggests that we are
looking in last layer, but there is an absolute redirect present in found
element and that redirects us to a layer in root and that means lookup will
continue in lower layers further.

For example, consider following.

/upperdir/pure (opaque=y)
/upperdir/pure/foo (opaque=y,redirect=/bar)
/lowerdir/bar

In this case pure is "pure upper". When we look for "foo", that time
poe->numlower=0. But that alone does not mean that we will not search for a
merge candidate in /lowerdir. Absolute redirect changes that.

IOW, d->last should not be set just based on poe->numlower if redirects are
enabled. That can lead to setting d->last while it should not have and that
means we will not check for opaque xattr while we should have.

So do this.

 - If redirects are not enabled, then continue to rely on poe->numlower
   information to determine if it is last layer or not.

 - If redirects are enabled, then set d->last = true only if this is the
   last layer in root ovl_entry (roe).
Suggested-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 02b69b28 ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10

Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN.
The reason is that while preparing the response for readdirplus, nfsd
checks inside encode_entryplus_baggage() that a child dentry's inode
number matches the value of d_ino returns by overlayfs readdir iterator.

Because the overlayfs inodes use arbitrary inode numbers that are not
correlated with the values of st_ino/d_ino, NFSv3 falls back to not
encoding d_type. Although this is an allowed behavior, we can fix it for
the case of all overlayfs layers on the same underlying filesystem.

When NFS export is enabled and d_ino is consistent with st_ino
(samefs), set the same value also to i_ino in ovl_fill_inode() for all
overlayfs inodes, nfsd readdirplus sanity checks will pass.
ovl_fill_inode() may be called from ovl_new_inode(), before real inode
was created with ino arg 0. In that case, i_ino will be updated to real
upper inode i_ino on ovl_inode_init() or ovl_inode_update().
Reported-by: NEddie Horng <eddiehorng.tw@gmail.com>
Tested-by: NEddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Fixes: 8383f174 ("ovl: wire up NFS export operations")
Cc: <stable@vger.kernel.org> #v4.16
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Add some hints about overlayfs kernel config options.

Enabling NFS export by default is especially recommended against, as it
incurs a performance penalty even if the filesystem is not actually
exported.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

redirect_dir=nofollow should not follow a redirect. But in a specific
configuration it can still follow it.  For example try this.

$ mkdir -p lower0 lower1/foo upper work merged
$ touch lower1/foo/lower-file.txt
$ setfattr -n "trusted.overlay.opaque" -v "y" lower1/foo
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=on none merged
$ cd merged
$ mv foo foo-renamed
$ umount merged

# mount again. This time with redirect_dir=nofollow
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=nofollow none merged
$ ls merged/foo-renamed/
# This lists lower-file.txt, while it should not have.

Basically, we are doing redirect check after we check for d.stop. And
if this is not last lower, and we find an opaque lower, d.stop will be
set.

ovl_lookup_single()
        if (!d->last && ovl_is_opaquedir(this)) {
                d->stop = d->opaque = true;
                goto out;
        }

To fix this, first check redirect is allowed. And after that check if
d.stop has been set or not.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Fixes: 438c84c2 ("ovl: don't follow redirects if redirect_dir=off")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

fs/overlayfs/export.c:459:10-16: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 4b91c30a ("ovl: lookup connected ancestor of dir in inode cache")
CC: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 06170154 ("ovl: lookup indexed ancestor of lower dir")
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This change relaxes copy up on encode of merge dir with lower layer > 1
and handles the case of encoding a merge dir with lower layer 1, where an
ancestor is a non-indexed merge dir. In that case, decode of the lower
file handle will not have been possible if the non-indexed ancestor is
redirected before or after encode.

Before encoding a non-upper directory file handle from real layer N, we
need to check if it will be possible to reconnect an overlay dentry from
the real lower decoded dentry. This is done by following the overlay
ancestry up to a "layer N connected" ancestor and verifying that all
parents along the way are "layer N connectable". If an ancestor that is
NOT "layer N connectable" is found, we need to copy up an ancestor, which
is "layer N connectable", thus making that ancestor "layer N connected".
For example:

 layer 1: /a
 layer 2: /a/b/c

The overlay dentry /a is NOT "layer 2 connectable", because if dir /a is
copied up and renamed, upper dir /a will be indexed by lower dir /a from
layer 1. The dir /a from layer 2 will never be indexed, so the algorithm
in ovl_lookup_real_ancestor() (*) will not be able to lookup a connected
overlay dentry from the connected lower dentry /a/b/c.

To avoid this problem on decode time, we need to copy up an ancestor of
/a/b/c, which is "layer 2 connectable", on encode time. That ancestor is
/a/b. After copy up (and index) of /a/b, it will become "layer 2 connected"
and when the time comes to decode the file handle from lower dentry /a/b/c,
ovl_lookup_real_ancestor() will find the indexed ancestor /a/b and decoding
a connected overlay dentry will be accomplished.

(*) the algorithm in ovl_lookup_real_ancestor() can be improved to lookup
an entry /a in the lower layers above layer N and find the indexed dir /a
from layer 1. If that improvement is made, then the check for "layer N
connected" will need to verify there are no redirects in lower layers above
layer N. In the example above, /a will be "layer 2 connectable". However,
if layer 2 dir /a is a target of a layer 1 redirect, then /a will NOT be
"layer 2 connectable":

 layer 1: /A (redirect = /a)
 layer 2: /a/b/c
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Commit 31747eda ("ovl: hash directory inodes for fsnotify")
fixed an issue of inotify watch on directory that stops getting
events after dropping dentry caches.

A similar issue exists for non-dir non-upper files, for example:

$ mkdir -p lower upper work merged
$ touch lower/foo
$ mount -t overlay -o
lowerdir=lower,workdir=work,upperdir=upper none merged
$ inotifywait merged/foo &
$ echo 2 > /proc/sys/vm/drop_caches
$ cat merged/foo

inotifywait doesn't get the OPEN event, because ovl_lookup() called
from 'cat' allocates a new overlay inode and does not reuse the
watched inode.

Fix this by hashing non-dir overlay inodes by lower real inode in
the following cases that were not hashed before this change:
 - A non-upper overlay mount
 - A lower non-hardlink when index=off

A helper ovl_hash_bylower() was added to put all the logic and
documentation about which real inode an overlay inode is hashed by
into one place.

The issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.

Cc: <stable@vger.kernel.org> #v4.13
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Another fix for an issue reported by 0-day robot.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 8ed5eec9 ("ovl: encode pure upper file handles")
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

A re-factoring patch in NFS export series has passed the wrong argument
to ovl_get_inode() causing a regression in the very recent fix to
fsnotify of overlay merge dir.

The regression has caused merge directory inodes to be hashed by upper
instead of lower real inode, when NFS export and directory indexing is
disabled. That caused an inotify watch to become obsolete after directory
copy up and drop caches.

LTP test inotify07 was improved to catch this regression.
The regression also caused multiple redirect dirs to same origin not to
be detected on lookup with NFS export disabled. An xfstest was added to
cover this case.

Fixes: 0aceb53e ("ovl: do not pass overlay dentry to ovl_get_inode()")
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Now that NFS export operations are implemented, enable overlayfs NFS
export support if the "nfs_export" feature is enabled.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

ovl_lookup_real() in lower layer walks back lower parents to find the
topmost indexed parent. If an indexed ancestor is found before reaching
lower layer root, ovl_lookup_real() is called recursively with upper
layer to walk back from indexed upper to the topmost connected/hashed
upper parent (or up to root).

ovl_lookup_real() in upper layer then walks forward to connect the topmost
upper overlay dir dentry and ovl_lookup_real() in lower layer continues to
walk forward to connect the decoded lower overlay dir dentry.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Decoding a dir file handle requires walking backward up to layer root and
for lower dir also checking the index to see if any of the parents have
been copied up.

Lookup overlay ancestor dentry in inode/dentry cache by decoded real
parents to shortcut looking up all the way back to layer root.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Non-indexed upper dirs are encoded as upper file handles. When NFS export
is enabled, hash non-indexed directory inodes by upper inode, so we can
find them in inode cache using the decoded upper inode.

When NFS export is disabled, directories are not indexed on copy up, so
hash non-indexed directory inodes by origin inode, the same hash key
that is used before copy up.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Similar to decoding a pure upper dir file handle, decoding a pure lower
dir file handle is implemented by looking an overlay dentry of the same
path as the pure lower path and verifying that the overlay dentry's
real lower matches the decoded real lower file handle.

Unlike the case of upper dir file handle, the lookup of overlay path by
lower real path can fail or find a mismatched overlay dentry if any of
the lower parents have been copied up and renamed. To address this case
we will need to check if any of the lower parents are indexed.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Decoding an indexed dir file handle is done by looking up the file handle
in index dir by name and then decoding the upper dir from the index origin
file handle. The decoded upper path is used to lookup an overlay dentry of
the same path.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Lookup overlay inode in cache by origin inode, so we can decode a file
handle of an open file even if the index has a whiteout index entry to
mark this overlay inode was unlinked.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Decoding an indexed non-dir file handle is similar to decoding a lower
non-dir file handle, but additionally, we lookup the file handle in index
dir by name to find the real upper inode.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Decoding a lower non-dir file handle is done by decoding the lower dentry
from underlying lower fs, finding or allocating an overlay inode that is
hashed by the real lower inode and instantiating an overlay dentry with
that inode.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

For indexed or lower non-dir, encode a non-connectable lower file handle
from origin inode. For indexed or lower dir, when ofs->numlower == 1,
encode a lower file handle from lower dir.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Decoding a merge dir, whose origin's parent is under a redirected
lower dir is not always possible. As a simple aproximation, we do
not encode lower dir file handles when overlay has multiple lower
layers and origin is below the topmost lower layer.

We should later relax this condition and copy up only the parent
that is under a redirected lower.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

We only need to encode origin if there is a chance that the same object was
encoded pre copy up and then we need to stay consistent with the same
encoding also after copy up.

In case a non-pure upper is not indexed, then it was copied up before NFS
export support was enabled. In that case, we don't need to worry about
staying consistent with pre copy up encoding and we encode an upper file
handle.

This mitigates the problem that with no index, we cannot find an upper
inode from origin inode, so we cannot decode a non-indexed upper from
origin file handle.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Until this change, we decoded upper file handles by instantiating an
overlay dentry from the real upper dentry. This is sufficient to handle
pure upper files, but insufficient to handle merge/impure dirs.

To that end, if decoded real upper dir is connected and hashed, we
lookup an overlay dentry with the same path as the real upper dir.
If decoded real upper is non-dir, we instantiate a disconnected overlay
dentry as before this change.

Because ovl_fh_to_dentry() returns a connected overlay dir dentry,
exportfs never needs to call get_parent() and get_name() to reconnect an
upper overlay dir. Because connectable non-dir file handles are not
supported, exportfs will not be able to use fh_to_parent() and get_name()
methods to reconnect a disconnected non-dir to its parent. Therefore, the
methods get_parent() and get_name() are implemented just to print out a
sanity warning and the method fh_to_parent() is implemented to warn the
user that using the 'subtree_check' exportfs option is not supported.

An alternative approach could have been to implement instantiating of
an overlay directory inode from origin/index and implement get_parent()
and get_name() by calling into underlying fs operations and them
instantiating the overlay parent dir.

The reasons for not choosing the get_parent() approach were:
- Obtaining a disconnected overlay dir dentry would requires a
  delicate re-factoring of ovl_lookup() to get a dentry with overlay
  parent info. It was preferred to avoid doing that re-factoring unless
  it was proven worthy.
- Going down the path of disconnected dir would mean that the (non
  trivial) code path of d_splice_alias() could be traveled and that
  meant writing more tests and introduces race cases that are very hard
  to hit on purpose. Taking the path of connecting overlay dentry by
  forward lookup is therefore the safe and boring way to avoid surprises.

The culprits of the chosen "connected overlay dentry" approach:
- We need to take special care to rename of ancestors while connecting
  the overlay dentry by real dentry path. These subtleties are usually
  handled by generic exportfs and VFS code.
- In a hypothetical workload, we could end up in a loop trying to connect,
  interrupted by rename and restarting connect forever.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Decoding an upper file handle is done by decoding the upper dentry from
underlying upper fs, finding or allocating an overlay inode that is
hashed by the real upper inode and instantiating an overlay dentry with
that inode.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Encode overlay file handles as struct ovl_fh containing the file handle
encoding of the real upper inode.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

We need to make some room in struct ovl_entry to store information
about redirected ancestors for NFS export, so cram two booleans as
bit flags.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

With NFS export, some operations on decoded file handles (e.g. open,
link, setattr, xattr_set) may call copy up with a disconnected non-dir.
In this case, we will copy up lower inode to index dir without
linking it to upper dir.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is required for NFS export.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is needed for using ovl_get_inode() for decoding file handles
for NFS export.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>