1. 03 1月, 2009 2 次提交
  2. 30 12月, 2008 3 次提交
    • J
      V4L/DVB (10130): use USB API functions rather than constants · 13417982
      Julia Lawall 提交于
      This set of patches introduces calls to the following set of functions:
      
      usb_endpoint_dir_in(epd)
      usb_endpoint_dir_out(epd)
      usb_endpoint_is_bulk_in(epd)
      usb_endpoint_is_bulk_out(epd)
      usb_endpoint_is_int_in(epd)
      usb_endpoint_is_int_out(epd)
      usb_endpoint_is_isoc_in(epd)
      usb_endpoint_is_isoc_out(epd)
      usb_endpoint_num(epd)
      usb_endpoint_type(epd)
      usb_endpoint_xfer_bulk(epd)
      usb_endpoint_xfer_control(epd)
      usb_endpoint_xfer_int(epd)
      usb_endpoint_xfer_isoc(epd)
      
      In some cases, introducing one of these functions is not possible, and it
      just replaces an explicit integer value by one of the following constants:
      
      USB_ENDPOINT_XFER_BULK
      USB_ENDPOINT_XFER_CONTROL
      USB_ENDPOINT_XFER_INT
      USB_ENDPOINT_XFER_ISOC
      
      An extract of the semantic patch that makes these changes is as follows:
      (http://www.emn.fr/x-info/coccinelle/)
      
      // <smpl>
      @r1@ struct usb_endpoint_descriptor *epd; @@
      
      - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
      - \(USB_ENDPOINT_XFER_CONTROL\|0\))
      + usb_endpoint_xfer_control(epd)
      
      @r5@ struct usb_endpoint_descriptor *epd; @@
      
      - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
      -  \(USB_DIR_IN\|0x80\))
      + usb_endpoint_dir_in(epd)
      // </smpl>
      Signed-off-by: NJulia Lawall <julia@diku.dk>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      13417982
    • K
      V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), dev_set_name() · af128a10
      Kay Sievers 提交于
      This patch is part of a larger patch series which will remove
      the "char bus_id[20]" name string from struct device. The device
      name is managed in the kobject anyway, and without any size
      limitation, and just needlessly copied into "struct device".
      
      To set and read the device name dev_name(dev) and dev_set_name(dev)
      must be used. If your code uses static kobjects, which it shouldn't
      do, "const char *init_name" can be used to statically provide the
      name the registered device should have. At registration time, the
      init_name field is cleared, to enforce the use of dev_name(dev) to
      access the device name at a later time.
      
      We need to get rid of all occurrences of bus_id in the entire tree
      to be able to enable the new interface. Please apply this patch,
      and possibly convert any remaining remaining occurrences of bus_id.
      
      We want to submit a patch to -next, which will remove bus_id from
      "struct device", to find the remaining pieces to convert, and finally
      switch over to the new api, which will remove the 20 bytes array
      and does no longer have a size limitation.
      
      Thanks,
      Kay
      Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
      Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      af128a10
    • H
      V4L/DVB (9503): v4l: remove inode argument from video_usercopy · f473bf76
      Hans Verkuil 提交于
      The inode argument was never used. Removing it from video_usercopy
      brings the function pointer type of video_usercopy in line with similar
      v4l2 functions, thus simplifying several drivers.
      Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      f473bf76
  3. 22 10月, 2008 1 次提交
    • H
      V4L/DVB (9327): v4l: use video_device.num instead of minor in video%d · c6330fb8
      Hans Verkuil 提交于
      The kernel number of a v4l2 node (e.g. videoX, radioX or vbiX) is now
      independent of the minor number. So instead of using the minor field
      of the video_device struct one has to use the num field: this always
      contains the kernel number of the device node.
      
      I forgot about this when I did the v4l2 core change, so this patch
      converts all drivers that use it in one go. Luckily the change is
      trivial.
      
      Cc: michael@mihu.de
      Cc: mchehab@infradead.org
      Cc: corbet@lwn.net
      Cc: luca.risolia@studio.unibo.it
      Cc: isely@pobox.com
      Cc: pe1rxq@amsat.org
      Cc: royale@zerezo.com
      Cc: mkrufky@linuxtv.org
      Cc: stoth@linuxtv.org
      Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      c6330fb8
  4. 16 10月, 2008 1 次提交
  5. 12 10月, 2008 3 次提交
  6. 27 7月, 2008 2 次提交
  7. 26 7月, 2008 3 次提交
  8. 24 7月, 2008 3 次提交
  9. 20 7月, 2008 2 次提交
  10. 25 4月, 2008 3 次提交
  11. 03 2月, 2008 1 次提交
  12. 26 1月, 2008 4 次提交
  13. 22 10月, 2007 1 次提交
  14. 10 10月, 2007 2 次提交
  15. 27 9月, 2007 1 次提交
  16. 31 7月, 2007 1 次提交
  17. 19 7月, 2007 4 次提交
  18. 09 5月, 2007 1 次提交
  19. 28 4月, 2007 2 次提交