Old 32-bit AMD CPUs (all w/o L3 cache) should always return 0
for cpuid_edx(0x80000006).

For unknown reason the 32-bit implementation differed from the
64-bit implementation. See commit 67cddd94 ("i386: Add L3 cache
support to AMD CPUID4 emulation"). The current check is the
result of the x86 merge.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <20100902133710.GA5449@loge.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

6b37f5a2 introduced the CPU frequency
calibration code for AMD CPUs whose TSCs didn't increment with the
core's P0 frequency. From F10h, revB onward, however, the TSC increment
rate is denoted by MSRC001_0015[24] and when this bit is set (which
should be done by the BIOS) the TSC increments with the P0 frequency
so the calibration is not needed and booting can be a couple of mcecs
faster on those machines.

Besides, there should be virtually no machines out there which don't
have this bit set, therefore this calibration can be safely removed. It
is a shaky hack anyway since it assumes implicitly that the core is in
P0 when BIOS hands off to the OS, which might not always be the case.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20100825162823.GE26438@aftab>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PIT: free irq source id in handling error path
  KVM: destroy workqueue on kvm_create_pit() failures
  KVM: fix poison overwritten caused by using wrong xstate size

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (58 commits)
  drm/i915,intel_agp: Add support for Sandybridge D0
  drm/i915: fix render pipe control notify on sandybridge
  agp/intel: set 40-bit dma mask on Sandybridge
  drm/i915: Remove the conflicting BUG_ON()
  drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/
  drm/i915/suspend: Flush register writes before busy-waiting.
  i915: disable DAC on Ironlake also when doing CRT load detection.
  drm/i915: wait for actual vblank, not just 20ms
  drm/i915: make sure eDP PLL is enabled at the right time
  drm/i915: fix VGA plane disable for Ironlake+
  drm/i915: eDP mode set sequence corrections
  drm/i915: add panel reset workaround
  drm/i915: Enable RC6 on Ironlake.
  drm/i915/sdvo: Only set is_lvds if we have a valid fixed mode.
  drm/i915: Set up a render context on Ironlake
  drm/i915 invalidate indirect state pointers at end of ring exec
  drm/i915: Wake-up wait_request() from elapsed hang-check (v2)
  drm/i915: Apply i830 errata for cursor alignment
  drm/i915: Only update i845/i865 CURBASE when disabled (v2)
  drm/i915: FBC is updated within set_base() so remove second call in mode_set()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix object alignment
  slub: add missing __percpu markup in mm/slub_def.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: wait for discard to finish

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This one is missed in last pipe control fix for sandybridge,
that really unmask interrupt bit for notify in render engine IMR.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

We now attempt to free "active" objects following a GPU hang as either
the GPU will be reset or the hang is permenant. In either case, the GPU
writes will not be flushed to main memory and it should be safe to
return that memory back to the system.

The BUG_ON(active) is thus overkill and can erroneously fire after a
EIO.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

For the shared paths on the next generation chipsets.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Like on Sandybridge, disabling the DAC here when doing CRT load detect
avoids forever hangs waiting on the hardware.

test procedure on HP 2740p:
boot with no VGA plugged in, start X,
plug in VGA monitor (1280x1024)
chvt 3
machine hangs waiting forever.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Waiting for a hard coded 20ms isn't always enough to make sure a vblank
period has actually occurred, so add code to make sure we really have
passed through a vblank period (or that the pipe is off when disabling).

This prevents problems with mode setting and link training, and seems to
fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but
on an HP 8440p instead.  Hopefully also fixes
https://bugs.freedesktop.org/show_bug.cgi?id=29141.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/mtd-2.6:
  mtd: nand: Fix probe of Samsung NAND chips
  mtd: nand: Fix regression in BBM detection
  pxa3xx: fix ns2cycle equation

The "Configure" word tends to make user believe they have to say 'yes'
to be able to choose the number of procs/nodes.  "Enable" should be
unambiguous enough.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Like the mlock() change previously, this makes the stack guard check
code use vma->vm_prev to see what the mapping below the current stack
is, rather than have to look it up with find_vma().

Also, accept an abutting stack segment, since that happens naturally if
you split the stack with mlock or mprotect.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we've split the stack vma, only the lowest one has the guard page.
Now that we have a doubly linked list of vma's, checking this is trivial.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's a really simple list, and several of the users want to go backwards
in it to find the previous vma.  So rather than have to look up the
previous entry with 'find_vma_prev()' or something similar, just make it
doubly linked instead.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Apparently, the check for a 6-byte ID string introduced by commit
426c457a ("mtd: nand: extend NAND flash
detection to new MLC chips") is NOT sufficient to determine whether or
not a Samsung chip uses their new MLC detection scheme or the old,
standard scheme. This adds a condition to check cell type.
Signed-off-by: NTilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: NBrian Norris <norris@broadcom.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, apic: Fix apic=debug boot crash
  x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issues
  x86-32: Fix dummy trampoline-related inline stubs
  x86-32: Separate 1:1 pagetables from swapper_pg_dir
  x86, cpu: Fix regression in AMD errata checking code

This list moved to lists.ozlabs.org quite some time ago.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All these lists moved to lists.ozlabs.org quite a while ago.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Chapter 6 is right about mutex_trylock, but chapter 10 wasn't.  This error
was introduced during semaphore-to-mutex conversion of the Unreliable
guide.  :-)

If user context which performs mutex_lock() or mutex_trylock() is
preempted by interrupt context which performs mutex_trylock() on the same
mutex instance, a deadlock occurs.  This is because these functions do not
disable local IRQs when they operate on mutex->wait_lock.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc-4.0.2:

  drivers/scsi/qla4xxx/ql4_os.c: In function 'qla4_8xxx_error_recovery':
  drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available
  drivers/scsi/qla4xxx/ql4_os.c:2377: sorry, unimplemented: called from here
  drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available
  drivers/scsi/qla4xxx/ql4_os.c:2393: sorry, unimplemented: called from here

Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix uml compile error:

  include/linux/dma-mapping.h:145: error: redefinition of 'dma_get_cache_alignment'
  arch/um/include/asm/dma-mapping.h:99: note: previous definition of 'dma_get_cache_alignment' was here

Introduced by commit 4565f017 ("dma-mapping: unify
dma_get_cache_alignment implementations")
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dump_tasks() needs to hold the RCU read lock around its access of the
target task's UID.  To this end it should use task_uid() as it only needs
that one thing from the creds.

The fact that dump_tasks() holds tasklist_lock is insufficient to prevent the
target process replacing its credentials on another CPU.

Then, this patch change to call rcu_read_lock() explicitly.

	===================================================
	[ INFO: suspicious rcu_dereference_check() usage. ]
	---------------------------------------------------
	mm/oom_kill.c:410 invoked rcu_dereference_check() without protection!

	other info that might help us debug this:

	rcu_scheduler_active = 1, debug_locks = 1
	4 locks held by kworker/1:2/651:
	 #0:  (events){+.+.+.}, at: [<ffffffff8106aae7>]
	process_one_work+0x137/0x4a0
	 #1:  (moom_work){+.+...}, at: [<ffffffff8106aae7>]
	process_one_work+0x137/0x4a0
	 #2:  (tasklist_lock){.+.+..}, at: [<ffffffff810fafd4>]
	out_of_memory+0x164/0x3f0
	 #3:  (&(&p->alloc_lock)->rlock){+.+...}, at: [<ffffffff810fa48e>]
	find_lock_task_mm+0x2e/0x70
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0aad4b31 ("oom: fold __out_of_memory into out_of_memory")
introduced a tasklist_lock leak.  Then it caused following obvious
danger warnings and panic.

    ================================================
    [ BUG: lock held when returning to user space! ]
    ------------------------------------------------
    rsyslogd/1422 is leaving the kernel with locks still held!
    1 lock held by rsyslogd/1422:
     #0:  (tasklist_lock){.+.+.+}, at: [<ffffffff810faf64>] out_of_memory+0x164/0x3f0
    BUG: scheduling while atomic: rsyslogd/1422/0x00000002
    INFO: lockdep is turned off.

This patch fixes it.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b940fd70 ("oom: remove unnecessary code and cleanup") added an
unnecessary NULL pointer dereference.  remove it.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's some merge problem between sdhic core and sdhci-s3c host.  After
mutex is changed to spinlock.  It needs to use use spin lock functions and
use the correct card detection function.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some SDHCI controllers like s5pc110 don't have an HISPD bit in the HOSTCTL
register.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s5pc110 (aka s5pv210) uses the same SDHCI IP.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each board can override the default sdhci host capabilities.
Some board has broken features by hardwares and support 8-bit bandwidth.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows
index and tree traversal code goes astray reading memory until it hits
unreadable memory.  Check for overflow and exit in that case.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert commit 7721fea3 ("hwmon:
f71882fg: add support for the Fintek F71808E").

Hans said:

: A second review after I've received a data sheet for this device from
: Fintek has turned up a few bugs.
:
: Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36
: cycle.  Therefor I would like to see this patch reverted as not having any
: support for the hwmon function of this superio chip is better then having
: unreliable support.

Cc: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide a check in all the kfifo examples to validate the correct
execution of each testcase.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We use a dynamically allocated kfifo in the dma example, so we need to
free it when unloading the module.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The scatterlist is used uninitialized in kfifo_dma_in_prepare().  This
triggers the following bug if CONFIG_DEBUG_SG=y:

  ------------[ cut here ]------------
  kernel BUG at include/linux/scatterlist.h:65!
  invalid opcode: 0000 [#1] PREEMPT SMP
  ...
  Call Trace:
   [<ffffffff810a1eab>] setup_sgl+0x6b/0xe0
   [<ffffffffa03d7000>] ? example_init+0x0/0x265 [dma_example]
   [<ffffffff810a2021>] __kfifo_dma_in_prepare+0x21/0x30
   [<ffffffffa03d7124>] example_init+0x124/0x265 [dma_example]
   [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370
   [<ffffffff81110c6e>] ? free_pages_prepare+0x11e/0x1e0
   [<ffffffff8106f2b1>] ? get_parent_ip+0x11/0x50
   [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370
   [<ffffffff810b65fd>] ? trace_hardirqs_on+0xd/0x10
   [<ffffffff814beade>] ? mutex_unlock+0xe/0x10
   [<ffffffff810f9c71>] ? trace_module_notify+0x41/0x370
   [<ffffffff810a77d5>] ? __blocking_notifier_call_chain+0x45/0x80
   [<ffffffff81137b7a>] ? vfree+0x2a/0x30
   [<ffffffff810a6ac3>] ? up_read+0x23/0x40
   [<ffffffff810a77f5>] ? __blocking_notifier_call_chain+0x65/0x80
   [<ffffffff810001e3>] do_one_initcall+0x43/0x180
   [<ffffffff810c577a>] sys_init_module+0xba/0x200
   [<ffffffff8103819b>] system_call_fastpath+0x16/0x1b
  RIP  [<ffffffff810a1e31>] setup_sgl_buf+0x1a1/0x1b0
   RSP <ffff88006720dc98>
  ---[ end trace a72b979fd3c1d3a5 ]---

Add the proper initialization to avoid the bug.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>