- 22 2月, 2018 6 次提交
-
-
由 David Howells 提交于
kmalloc() can't always allocate large enough buffers for big_key to use for crypto (1MB + some metadata) so we cannot use that to allocate the buffer. Further, vmalloc'd pages can't be passed to sg_init_one() and the aead crypto accessors cannot be called progressively and must be passed all the data in one go (which means we can't pass the data in one block at a time). Fix this by allocating the buffer pages individually and passing them through a multientry scatterlist to the crypto layer. This has the bonus advantage that we don't have to allocate a contiguous series of pages. We then vmap() the page list and pass that through to the VFS read/write routines. This can trigger a warning: WARNING: CPU: 0 PID: 60912 at mm/page_alloc.c:3883 __alloc_pages_nodemask+0xb7c/0x15f8 ([<00000000002acbb6>] __alloc_pages_nodemask+0x1ee/0x15f8) [<00000000002dd356>] kmalloc_order+0x46/0x90 [<00000000002dd3e0>] kmalloc_order_trace+0x40/0x1f8 [<0000000000326a10>] __kmalloc+0x430/0x4c0 [<00000000004343e4>] big_key_preparse+0x7c/0x210 [<000000000042c040>] key_create_or_update+0x128/0x420 [<000000000042e52c>] SyS_add_key+0x124/0x220 [<00000000007bba2c>] system_call+0xc4/0x2b0 from the keyctl/padd/useradd test of the keyutils testsuite on s390x. Note that it might be better to shovel data through in page-sized lumps instead as there's no particular need to use a monolithic buffer unless the kernel itself wants to access the data. Fixes: 13100a72 ("Security: Keys: Big keys stored encrypted") Reported-by: NPaul Bunyan <pbunyan@redhat.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Kirill Marinushkin <k.marinushkin@gmail.com>
-
由 Eric Biggers 提交于
The asymmetric key type allows an X.509 certificate to be added even if its signature's hash algorithm is not available in the crypto API. In that case 'payload.data[asym_auth]' will be NULL. But the key restriction code failed to check for this case before trying to use the signature, resulting in a NULL pointer dereference in key_or_keyring_common() or in restrict_link_by_signature(). Fix this by returning -ENOPKG when the signature is unsupported. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled and keyctl has support for the 'restrict_keyring' command: keyctl new_session keyctl restrict_keyring @s asymmetric builtin_trusted openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: a511e1af ("KEYS: Move the point of trust determination to __key_link()") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Eric Biggers 提交于
The X.509 parser mishandles the case where the certificate's signature's hash algorithm is not available in the crypto API. In this case, x509_get_sig_params() doesn't allocate the cert->sig->digest buffer; this part seems to be intentional. However, public_key_verify_signature() is still called via x509_check_for_self_signed(), which triggers the 'BUG_ON(!sig->digest)'. Fix this by making public_key_verify_signature() return -ENOPKG if the hash buffer has not been allocated. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled: openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: 6c2dc5ae ("X.509: Extract signature digest and make self-signed cert checks earlier") Reported-by: NPaolo Valente <paolo.valente@linaro.org> Cc: Paolo Valente <paolo.valente@linaro.org> Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Eric Biggers 提交于
If none of the certificates in a SignerInfo's certificate chain match a trusted key, nor is the last certificate signed by a trusted key, then pkcs7_validate_trust_one() tries to check whether the SignerInfo's signature was made directly by a trusted key. But, it actually fails to set the 'sig' variable correctly, so it actually verifies the last signature seen. That will only be the SignerInfo's signature if the certificate chain is empty; otherwise it will actually be the last certificate's signature. This is not by itself a security problem, since verifying any of the certificates in the chain should be sufficient to verify the SignerInfo. Still, it's not working as intended so it should be fixed. Fix it by setting 'sig' correctly for the direct verification case. Fixes: 757932e6 ("PKCS#7: Handle PKCS#7 messages that contain no X.509 certs") Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Eric Biggers 提交于
If there is a blacklisted certificate in a SignerInfo's certificate chain, then pkcs7_verify_sig_chain() sets sinfo->blacklisted and returns 0. But, pkcs7_verify() fails to handle this case appropriately, as it actually continues on to the line 'actual_ret = 0;', indicating that the SignerInfo has passed verification. Consequently, PKCS#7 signature verification ignores the certificate blacklist. Fix this by not considering blacklisted SignerInfos to have passed verification. Also fix the function comment with regards to when 0 is returned. Fixes: 03bb7931 ("PKCS#7: Handle blacklisted certificates") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Eric Biggers 提交于
When pkcs7_verify_sig_chain() is building the certificate chain for a SignerInfo using the certificates in the PKCS#7 message, it is passing the wrong arguments to public_key_verify_signature(). Consequently, when the next certificate is supposed to be used to verify the previous certificate, the next certificate is actually used to verify itself. An attacker can use this bug to create a bogus certificate chain that has no cryptographic relationship between the beginning and end. Fortunately I couldn't quite find a way to use this to bypass the overall signature verification, though it comes very close. Here's the reasoning: due to the bug, every certificate in the chain beyond the first actually has to be self-signed (where "self-signed" here refers to the actual key and signature; an attacker might still manipulate the certificate fields such that the self_signed flag doesn't actually get set, and thus the chain doesn't end immediately). But to pass trust validation (pkcs7_validate_trust()), either the SignerInfo or one of the certificates has to actually be signed by a trusted key. Since only self-signed certificates can be added to the chain, the only way for an attacker to introduce a trusted signature is to include a self-signed trusted certificate. But, when pkcs7_validate_trust_one() reaches that certificate, instead of trying to verify the signature on that certificate, it will actually look up the corresponding trusted key, which will succeed, and then try to verify the *previous* certificate, which will fail. Thus, disaster is narrowly averted (as far as I could tell). Fixes: 6c2dc5ae ("X.509: Extract signature digest and make self-signed cert checks earlier") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 21 2月, 2018 1 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'leds_for-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED maintainer update: "LED update to MAINTAINERS, to admit the reality. Message from Richard: "I've been looking at some of the emails but not needed to be involved for a while now, you're doing fine without me!" [0] Many thanks to Richard for his work as a founder of the LED subsystem!" [0] https://lkml.org/lkml/2018/2/18/145 * tag 'leds_for-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Remove Richard Purdie from LED maintainers
-
- 20 2月, 2018 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Prevent index integer overflow in ptr_ring, from Jason Wang. 2) Program mvpp2 multicast filter properly, from Mikulas Patocka. 3) The bridge brport attribute file is write only and doesn't have a ->show() method, don't blindly invoke it. From Xin Long. 4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil. 5) Fix multiple definition issue with if_ether.h UAPI header, from Hauke Mehrtens. 6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini Varadhan. 7) Revert XDP redirect support from thunderx driver, it is not implemented properly. From Jesper Dangaard Brouer. 8) Fix missing RTNL protection across some tipc operations, from Ying Xue. 9) Return the correct IV bytes in the TLS getsockopt code, from Boris Pismenny. 10) Take tclassid into consideration properly when doing FIB rule matching. From Stefano Brivio. 11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom. 12) TUN driver doesn't align frags properly, and we can end up doing unaligned atomics on misaligned metadata. From Eric Dumazet. 13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) tg3: APE heartbeat changes mlxsw: spectrum_router: Do not unconditionally clear route offload indication net: qualcomm: rmnet: Fix possible null dereference in command processing net: qualcomm: rmnet: Fix warning seen with 64 bit stats net: qualcomm: rmnet: Fix crash on real dev unregistration sctp: remove the left unnecessary check for chunk in sctp_renege_events rxrpc: Work around usercopy check tun: fix tun_napi_alloc_frags() frag allocator udplite: fix partial checksum initialization skbuff: Fix comment mis-spelling. dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock PCI/cxgb4: Extend T3 PCI quirk to T4+ devices cxgb4: fix trailing zero in CIM LA dump cxgb4: free up resources of pf 0-3 fib_semantics: Don't match route with mismatching tclassid NFC: llcp: Limit size of SDP URI tls: getsockopt return record sequence number tls: reset the crypto info if copy_from_user fails tls: retrun the correct IV in getsockopt docs: segmentation-offloads.txt: add SCTP info ...
-
由 Jacek Anaszewski 提交于
Richard has been inactive on the linux-leds list for a long time. After email discussion we agreed on removing him from the LED maintainers, which will better reflect the actual status. Acked-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
-
由 Prashant Sreedharan 提交于
In ungraceful host shutdown or driver crash case BMC connectivity is lost. APE firmware is missing the driver state in this case to keep the BMC connectivity alive. This patch has below change to address this issue. Heartbeat mechanism with APE firmware. This heartbeat mechanism is needed to notify the APE firmware about driver state. This patch also has the change in wait time for APE event from 1ms to 20ms as there can be some delay in getting response. v2: Drop inline keyword as per David suggestion. Signed-off-by: NPrashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: NSatish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
When mlxsw replaces (or deletes) a route it removes the offload indication from the replaced route. This is problematic for IPv4 routes, as the offload indication is stored in the fib_info which is usually shared between multiple routes. Instead of unconditionally clearing the offload indication, only clear it if no other route is using the fib_info. Fixes: 3984d1a8 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reported-by: NAlexander Petrovskiy <alexpe@mellanox.com> Tested-by: NAlexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Subash Abhinov Kasiviswanathan says: ==================== net: qualcomm: rmnet: Fix issues with CONFIG_DEBUG_PREEMPT enabled Patch 1 and 2 fixes issues identified when CONFIG_DEBUG_PREEMPT was enabled. These involve APIs which were called in invalid contexts. Patch 3 is a null derefence fix identified by code inspection. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
If a command packet with invalid mux id is received, the packet would not have a valid endpoint. This invalid endpoint maybe dereferenced leading to a crash. Identified by manual code inspection. Fixes: 3352e6c4 ("net: qualcomm: rmnet: Convert the muxed endpoint to hlist") Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
With CONFIG_DEBUG_PREEMPT enabled, a warning was seen on device creation. This occurs due to the incorrect cpu API usage in ndo_get_stats64 handler. BUG: using smp_processor_id() in preemptible [00000000] code: rmnetcli/5743 caller is debug_smp_processor_id+0x1c/0x24 Call trace: [<ffffff9d48c8967c>] dump_backtrace+0x0/0x2a8 [<ffffff9d48c89bbc>] show_stack+0x20/0x28 [<ffffff9d4901fff8>] dump_stack+0xa8/0xe0 [<ffffff9d490421e0>] check_preemption_disabled+0x104/0x108 [<ffffff9d49042200>] debug_smp_processor_id+0x1c/0x24 [<ffffff9d494a36b0>] rmnet_get_stats64+0x64/0x13c [<ffffff9d49b014e0>] dev_get_stats+0x68/0xd8 [<ffffff9d49d58df8>] rtnl_fill_stats+0x54/0x140 [<ffffff9d49b1f0b8>] rtnl_fill_ifinfo+0x428/0x9cc [<ffffff9d49b23834>] rtmsg_ifinfo_build_skb+0x80/0xf4 [<ffffff9d49b23930>] rtnetlink_event+0x88/0xb4 [<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78 [<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78 [<ffffff9d49b08bf8>] __netdev_upper_dev_link+0x290/0x5e8 [<ffffff9d49b08fcc>] netdev_master_upper_dev_link+0x3c/0x48 [<ffffff9d494a2e74>] rmnet_newlink+0xf0/0x1c8 [<ffffff9d49b23360>] rtnl_newlink+0x57c/0x6c8 [<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244 [<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc [<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44 [<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294 [<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390 [<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60 [<ffffff9d49ae91bc>] SyS_sendto+0x1a0/0x1e4 [<ffffff9d48c83770>] el0_svc_naked+0x24/0x28 Fixes: 192c4b5d ("net: qualcomm: rmnet: Add support for 64 bit stats") Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
With CONFIG_DEBUG_PREEMPT enabled, a crash with the following call stack was observed when removing a real dev which had rmnet devices attached to it. To fix this, remove the netdev_upper link APIs and instead use the existing information in rmnet_port and rmnet_priv to get the association between real and rmnet devs. BUG: sleeping function called from invalid context in_atomic(): 0, irqs_disabled(): 0, pid: 5762, name: ip Preemption disabled at: [<ffffff9d49043564>] debug_object_active_state+0xa4/0x16c Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: PC is at ___might_sleep+0x13c/0x180 LR is at ___might_sleep+0x17c/0x180 [<ffffff9d48ce0924>] ___might_sleep+0x13c/0x180 [<ffffff9d48ce09c0>] __might_sleep+0x58/0x8c [<ffffff9d49d6253c>] mutex_lock+0x2c/0x48 [<ffffff9d48ed4840>] kernfs_remove_by_name_ns+0x48/0xa8 [<ffffff9d48ed6ec8>] sysfs_remove_link+0x30/0x58 [<ffffff9d49b05840>] __netdev_adjacent_dev_remove+0x14c/0x1e0 [<ffffff9d49b05914>] __netdev_adjacent_dev_unlink_lists+0x40/0x68 [<ffffff9d49b08820>] netdev_upper_dev_unlink+0xb4/0x1fc [<ffffff9d494a29f0>] rmnet_dev_walk_unreg+0x6c/0xc8 [<ffffff9d49b00b40>] netdev_walk_all_lower_dev_rcu+0x58/0xb4 [<ffffff9d494a30fc>] rmnet_config_notify_cb+0xf4/0x134 [<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78 [<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78 [<ffffff9d49b0b568>] rollback_registered_many+0x230/0x3c8 [<ffffff9d49b0b738>] unregister_netdevice_many+0x38/0x94 [<ffffff9d49b1e110>] rtnl_delete_link+0x58/0x88 [<ffffff9d49b201dc>] rtnl_dellink+0xbc/0x1cc [<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244 [<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc [<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44 [<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294 [<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390 [<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60 [<ffffff9d49ae6f94>] ___sys_sendmsg+0x298/0x2b0 [<ffffff9d49ae98f8>] SyS_sendmsg+0xb4/0xf0 [<ffffff9d48c83770>] el0_svc_naked+0x24/0x28 Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Fixes: 60d58f97 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2018 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 Kconfig fixes from Thomas Gleixner: "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in Kconfig when CPU selections are explicitely set to M586 or M686" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Thomas Gleixner: "Perf tool updates and kprobe fixes: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) - Improve error handling and error propagation of ftrace based kprobes so failures when installing kprobes are not silently ignored and create disfunctional tracepoints" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) kprobes: Propagate error from disarm_kprobe_ftrace() kprobes: Propagate error from arm_kprobe_ftrace() Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h" perf s390: Rework system call table creation by using syscall.tbl perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl tools/headers: Synchronize kernel ABI headers, v4.16-rc1 perf test: Fix test trace+probe_libc_inet_pton.sh for s390x perf data: Document missing --force option perf tools: Substitute yet another strtoull() perf top: Check the latency of perf_top__mmap_read() perf top: Switch default mode to overwrite mode perf top: Remove lost events checking perf hists browser: Add parameter to disable lost event warning perf top: Add overwrite fall back perf evsel: Expose the perf_missing_features struct perf top: Check per-event overwrite term perf mmap: Discard legacy interface for mmap read perf test: Update mmap read functions for backward-ring-buffer test perf mmap: Introduce perf_mmap__read_event() perf mmap: Introduce perf_mmap__read_done() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "A small set of updates mostly for irq chip drivers: - MIPS GIC fix for spurious, masked interrupts - fix for a subtle IPI bug in GICv3 - do not probe GICv3 ITSs that are marked as disabled - multi-MSI support for GICv2m - various small cleanups" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro irqchip/bcm: Remove hashed address printing irqchip/gic-v2m: Add PCI Multi-MSI support irqchip/gic-v3: Ignore disabled ITS nodes irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() irqchip/gic-v3: Change pr_debug message to pr_devel irqchip/mips-gic: Avoid spuriously handling masked interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core fix from Thomas Gleixner: "A small fix which adds the missing for_each_cpu_wrap() stub for the UP case to avoid build failures" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpumask: Make for_each_cpu_wrap() available on UP as well
-
- 18 2月, 2018 6 次提交
-
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes all over the map for nvme. From various folks. - Classic polling fix, that avoids a latency issue where we still end up waiting for an interrupt in some cases. From Nitesh Shetty. - Comment typo fix from Minwoo Im. * tag 'for-linus-20180217' of git://git.kernel.dk/linux-block: block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS nvme-rdma: fix sysfs invoked reset_ctrl error flow nvmet: Change return code of discard command if not supported nvme-pci: Fix timeouts in connecting state nvme-pci: Remap CMB SQ entries on every controller reset nvme: fix the deadlock in nvme_update_formats blk: optimization for classic polling nvme: Don't use a stack buffer for keep-alive command nvme_fc: cleanup io completion nvme_fc: correct abort race condition on resets nvme: Fix discard buffer overrun nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: - meson-gx: Revert to earlier tuning process - bcm2835: Don't overwrite max frequency unconditionally * tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: bcm2835: Don't overwrite max frequency unconditionally Revert "mmc: meson-gx: include tx phase in the tuning process"
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull mtd fixes from Boris Brezillon: - add missing dependency to NAND_MARVELL Kconfig entry - use the appropriate OOB layout in the VF610 driver * tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd: mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA mtd: nand: vf610: set correct ooblayout
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "The main attraction is a fix for a bug in the new drmem code, which was causing an oops on boot on some versions of Qemu. There's also a fix for XIVE (Power9 interrupt controller) on KVM, as well as a few other minor fixes. Thanks to: Corentin Labbe, Cyril Bur, Cédric Le Goater, Daniel Black, Nathan Fontenot, Nicholas Piggin" * tag 'powerpc-4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Check for zero filled ibm,dynamic-memory property powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n powerpc/powernv: IMC fix out of bounds memory access at shutdown powerpc/xive: Use hw CPU ids when configuring the CPU queues powerpc: Expose TSCR via sysfs only on powernv
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: "The bulk of this is the pte accessors annotation to READ/WRITE_ONCE (we tried to avoid pushing this during the merge window to avoid conflicts) - Updated the page table accessors to use READ/WRITE_ONCE and prevent compiler transformation that could lead to an apparent loss of coherency - Enabled branch predictor hardening for the Falkor CPU - Fix interaction between kpti enabling and KASan causing the recursive page table walking to take a significant time - Fix some sparse warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cputype: Silence Sparse warnings arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tables arm64: proc: Set PTE_NG for table entries to avoid traversing them twice arm64: Add missing Falkor part number for branch predictor hardening
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: - fixes for the Xen pvcalls frontend driver - fix for booting Xen pv domains - fix for the xenbus driver user interface * tag 'for-linus-4.16a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: wait for other operations to return when release passive sockets pvcalls-front: introduce a per sock_mapping refcount x86/xen: Calculate __max_logical_packages on PV domains xenbus: track caller request id
-
- 17 2月, 2018 14 次提交
-
-
由 Stefano Stabellini 提交于
Passive sockets can have ongoing operations on them, specifically, we have two wait_event_interruptable calls in pvcalls_front_accept. Add two wake_up calls in pvcalls_front_release, then wait for the potential waiters to return and release the sock_mapping refcount. Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
Introduce a per sock_mapping refcount, in addition to the existing global refcount. Thanks to the sock_mapping refcount, we can safely wait for it to be 1 in pvcalls_front_release before freeing an active socket, instead of waiting for the global refcount to be 1. Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Prarit Bhargava 提交于
The kernel panics on PV domains because native_smp_cpus_done() is only called for HVM domains. Calculate __max_logical_packages for PV domains. Fixes: b4c0a732 ("x86/smpboot: Fix __max_logical_packages estimate") Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Tested-and-reported-by: NSimon Gaiser <simon@invisiblethingslab.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: xen-devel@lists.xenproject.org Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Joao Martins 提交于
Commit fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel. struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */ /* Generally followed by nul-terminated string(s). */ }; Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value. Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by: NBhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Robin Murphy 提交于
Sparse makes a fair bit of noise about our MPIDR mask being implicitly long - let's explicitly describe it as such rather than just relying on the value forcing automatic promotion. Signed-off-by: NRobin Murphy <robin.murphy@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Xin Long 提交于
Commit fb234035 ("sctp: remove the useless check in sctp_renege_events") forgot to remove another check for chunk in sctp_renege_events. Dan found this when doing a static check. This patch is to remove that check, and also to merge two checks into one 'if statement'. Fixes: fb234035 ("sctp: remove the useless check in sctp_renege_events") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Due to a check recently added to copy_to_user(), it's now not permitted to copy from slab-held data to userspace unless the slab is whitelisted. This affects rxrpc_recvmsg() when it attempts to place an RXRPC_USER_CALL_ID control message in the userspace control message buffer. A warning is generated by usercopy_warn() because the source is the copy of the user_call_ID retained in the rxrpc_call struct. Work around the issue by copying the user_call_ID to a variable on the stack and passing that to put_cmsg(). The warning generated looks like: Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLUB object 'dmaengine-unmap-128' (offset 680, size 8)! WARNING: CPU: 0 PID: 1401 at mm/usercopy.c:81 usercopy_warn+0x7e/0xa0 ... RIP: 0010:usercopy_warn+0x7e/0xa0 ... Call Trace: __check_object_size+0x9c/0x1a0 put_cmsg+0x98/0x120 rxrpc_recvmsg+0x6fc/0x1010 [rxrpc] ? finish_wait+0x80/0x80 ___sys_recvmsg+0xf8/0x240 ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? finish_task_switch+0xa6/0x2b0 ? trace_hardirqs_on_caller+0xed/0x180 ? _raw_spin_unlock_irq+0x29/0x40 ? __sys_recvmsg+0x4e/0x90 __sys_recvmsg+0x4e/0x90 do_syscall_64+0x7a/0x220 entry_SYSCALL_64_after_hwframe+0x26/0x9b Reported-by: NJonathan Billings <jsbillings@jsbillings.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NKees Cook <keescook@chromium.org> Tested-by: NJonathan Billings <jsbillings@jsbillings.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
<Mark Rutland reported> While fuzzing arm64 v4.16-rc1 with Syzkaller, I've been hitting a misaligned atomic in __skb_clone: atomic_inc(&(skb_shinfo(skb)->dataref)); where dataref doesn't have the required natural alignment, and the atomic operation faults. e.g. i often see it aligned to a single byte boundary rather than a four byte boundary. AFAICT, the skb_shared_info is misaligned at the instant it's allocated in __napi_alloc_skb() __napi_alloc_skb() </end of report> Problem is caused by tun_napi_alloc_frags() using napi_alloc_frag() with user provided seg sizes, leading to other users of this API getting unaligned page fragments. Since we would like to not necessarily add paddings or alignments to the frags that tun_napi_alloc_frags() attaches to the skb, switch to another page frag allocator. As a bonus skb_page_frag_refill() can use GFP_KERNEL allocations, meaning that we can not deplete memory reserves as easily. Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kodanev 提交于
Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfc ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f ("net: Call skb_checksum_init in IPv6") Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
'peform' --> 'perform' Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
After commit 3f34cfae ("netfilter: on sockopt() acquire sock lock only in the required scope"), the caller of nf_{get/set}sockopt() must not hold any lock, but, in such changeset, I forgot to cope with DECnet. This commit addresses the issue moving the nf call outside the lock, in the dn_{get,set}sockopt() with the same schema currently used by ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main switch statements, to improve code readability. Reported-by: NPetr Vandrovec <petr@vandrovec.name> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2 Fixes: 3f34cfae ("netfilter: on sockopt() acquire sock lock only in the required scope") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
We've run into a problem where our device is attached to a Virtual Machine and the use of the new pci_set_vpd_size() API doesn't help. The VM kernel has been informed that the accesses are okay, but all of the actual VPD Capability Accesses are trapped down into the KVM Hypervisor where it goes ahead and imposes the silent denials. The right idea is to follow the kernel.org commit 1c7de2b4 ("PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored to establish a PCI Quirk for our T3-based adapters. This commit extends that PCI Quirk to cover Chelsio T4 devices and later. The advantage of this approach is that the VPD Size gets set early in the Base OS/Hypervisor Boot and doesn't require that the cxgb4 driver even be available in the Base OS/Hypervisor. Thus PF4 can be exported to a Virtual Machine and everything should work. Fixes: 67e65879 ("cxgb4: Set VPD size so we can read both VPD structures") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NArjun Vynipadath <arjun@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Set correct size of the CIM LA dump for T6. Fixes: 27887bc7 ("cxgb4: collect hardware LA dumps") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
free pf 0-3 resources, commit baf50868 ("cxgb4: restructure VF mgmt code") erroneously removed the code which frees the pf 0-3 resources, causing the probe of pf 0-3 to fail in case of driver reload. Fixes: baf50868 ("cxgb4: restructure VF mgmt code") Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-