* Separate out numa_add_memblk_to() from numa_add_memblk() so that
  different numa_meminfo can be used.

* Rename cmdline to emu_cmdline.

* Drop @start/last_pfn from numa_emulation() and use max_pfn directly.

This patch doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Node distance either used direct node comparison, ACPI PXM comparison
or ACPI SLIT table lookup.  This patch implements generic node
distance handling.  NUMA init methods can call numa_set_distance() to
set distance between nodes and the common __node_distance()
implementation will report the set distance.

Due to the way NUMA emulation is implemented, the generic node
distance handling is used only when emulation is not used.  Later
patches will update NUMA emulation to use the generic distance
mechanism.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

With all memory configuration information now carried in numa_meminfo,
there's no need to keep mem_nodes_parsed separate.  Drop it and use
numa_nodes_parsed for CPU / memory-less nodes.

A new helper numa_nodemask_from_meminfo() is added to calculate
memnode mask on the fly which is currently used to set
node_possible_map.

This simplifies NUMA init methods a bit and removes a source of
possible inconsistencies.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

It's no longer necessary to keep both cpu_nodes_parsed and
mem_nodes_parsed.  In preparation for merge, rename cpu_nodes_parsed
to numa_nodes_parsed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

numa_nodes[] doesn't carry any information which isn't present in
numa_meminfo.  Each entry is simply min/max range of all the memblks
for the node.  This is not only redundant but also inaccurate when
memblks for different nodes interleave - for example,
find_node_by_addr() can return the wrong nodeid.

Kill numa_nodes[] and always use numa_meminfo instead.

* nodes_cover_memory() is renamed to numa_meminfo_cover_memory() and
  now operations on numa_meminfo and returns bool.

* setup_node_bootmem() needs min/max range.  Compute the range on the
  fly.  setup_node_bootmem() invocation is restructured to use outer
  loop instead of hardcoding the double invocations.

* find_node_by_addr() now operates on numa_meminfo.

* setup_physnodes() builds physnodes[] from memblks.  This will go
  away when emulation code is updated to use struct numa_meminfo.

This patch also makes the following misc changes.

* Clearing of nodes_add[] clearing is converted to memset().

* numa_add_memblk() in amd_numa_init() is moved down a bit for
  consistency.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

srat_64.c and amdtopology_64.c had their own versions of
find_node_by_addr() which were basically the same.  Add common one in
numa_64.c and remove the duplicates.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

memblk sanity check was scattered around and incomplete.  Consolidate
and improve.

* Confliction detection and cutoff_node() logic are moved to
  numa_cleanup_meminfo().

* numa_cleanup_meminfo() clears the unused memblks before returning.

* Check and warn about invalid input parameters in numa_add_memblk().

* Check the maximum number of memblk isn't exceeded in
  numa_add_memblk().

* numa_cleanup_meminfo() is now called before numa_emulation() so that
  the emulation code also uses the cleaned up version.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

* Factor out numa_remove_memblk_from().

* Hole detection doesn't need separate start/end.  Calculate start/end
  once.

* Relocate comment.

* Define iterators at the top and remove unnecessary prefix
  increments.

This prepares for further improvements to the function.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Separate out numa_cleanup_meminfo() from numa_register_memblks().
node_possible_map initialization is moved to the top of the split
numa_register_memblks().

This patch doesn't cause behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Arrays for memblks and nodeids and their length lived in separate
variables making things unnecessarily cumbersome.  Introduce struct
numa_meminfo which contains all memory configuration info.  This patch
doesn't cause any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

numa_emulation() called compute_hash_shift() with %NULL @nodeids which
meant identity mapping between index and nodeid.  Make
numa_emulation() build identity array and drop %NULL @nodeids handling
from populate_memnodemap() and thus from compute_hash_shift().  This
is to prepare for transition to using memblks instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

They are empty now.  Kill them.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Move the remaining memblk registration logic from acpi_scan_nodes() to
numa_register_memblks() and initmem_init().

This applies nodes_cover_memory() sanity check, memory node sorting
and node_online() checking, which were only applied to acpi, to all
init methods.

As all memblk registration is moved to common code, active range
clearing is moved to initmem_init() too and removed from bad_srat().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Make both amd and dummy use numa_add_memblk() to describe the detected
memory blocks.  This allows initmem_init() to call
numa_register_memblk() regardless of init method in use.  Drop custom
memory registration codes from amd and dummy.

After this change, memblk merge/cleanup in numa_register_memblks() is
applied to all init methods.

As this makes compute_hash_shift() and numa_register_memblks() used
only inside numa_64.c, make them static.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Factor out memblk handling from srat_64.c into two functions in
numa_64.c.  This patch doesn't introduce any behavior change.  The
next patch will make all init methods use these functions.

- v2: Fixed build failure on 32bit due to misplaced NR_NODE_MEMBLKS.
      Reported by Ingo.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

With common numa_nodes[], common code in numa_64.c can access it
directly.  Copy directly and kill {acpi|amd}_get_nodes().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

ACPI and amd are using separate nodes[] array.  Add numa_nodes[] and
use them in all NUMA init methods.  cutoff_node() cleanup is moved
from srat_64.c to numa_64.c and applied in initmem_init() regardless
of init methods.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

ACPI and amd are using separate nodes_parsed masks.  Add
{cpu|mem}_nodes_parsed and use them in all NUMA init methods.
Initialization of the masks and building node_possible_map are now
handled commonly by initmem_init().

dummy_numa_init() is updated to set node 0 on both masks.  While at
it, move the info messages from scan to init.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Reorganize initmem_init() such that,

* Different NUMA init methods are iterated in a consistent way.

* Each iteration re-initializes all the parameters and different
  method can be tried after a failure.

* Dummy init is handled the same as other methods.

Apart from how retry after failure, this patch doesn't change the
behavior.  The call sequences are kept equivalent across the
conversion.

After the change, bad_srat() doesn't need to clear apic to node
mapping or worry about numa_off.  Simplified accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

There's no reason for these to live in setup_arch().  Move them inside
initmem_init().

- v2: x86-32 initmem_init() weren't updated breaking 32bit builds.
  Fixed.  Found by Ankita.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

The functions used during NUMA initialization - *_numa_init() and
*_scan_nodes() - have different arguments and return values.  Unify
them such that they all take no argument and return 0 on success and
-errno on failure.  This is in preparation for further NUMA init
cleanups.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

initmem_init() extensively accesses and modifies global data
structures and the parameters aren't even followed depending on which
path is being used.  Drop @start/last_pfn and let it deal with
@max_pfn directly.  This is in preparation for further NUMA init
cleanups.

- v2: x86-32 initmem_init() weren't updated breaking 32bit builds.
  Fixed.  Found by Yinghai.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Dummy node initialization in initmem_init() didn't initialize apicid
to node mapping and set cpu to node mapping directly by caling
numa_set_node(), which is different from non-dummy init paths.

Update it such that they behave similarly.  Initialize apicid to node
mapping and call numa_init_array().  The actual cpu to node mapping is
handled by init_cpu_to_node() later.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

CONFIG_DEBUG_PER_CPU_MAPS may return NUMA_NO_NODE when an
early_cpu_to_node() mapping hasn't been initialized.  In such a
case, it emits a warning and continues without an issue but
callers may try to use the return value to index into an array.

We can catch those errors and fail silently since a warning has
already been emitted.  No current user of numa_add_cpu()
requires this error checking to avoid a crash, but it's better
to be proactive in case a future user happens to have a bug and
a user tries to diagnose it with CONFIG_DEBUG_PER_CPU_MAPS.
Reported-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1102071407250.7812@chino.kir.corp.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that everything else is unified, NUMA initialization can be
unified too.

* numa_init_array() and init_cpu_to_node() are moved from
  numa_64 to numa.

* numa_32::initmem_init() is updated to call numa_init_array()
  and setup_arch() to call init_cpu_to_node() on 32bit too.

* x86_cpu_to_node_map is now initialized to NUMA_NO_NODE on
  32bit too. This is safe now as numa_init_array() will initialize
  it early during boot.

This makes NUMA mapping fully initialized before
setup_per_cpu_areas() on 32bit too and thus makes the first
percpu chunk which contains all the static variables and some of
dynamic area allocated with NUMA affinity correctly considered.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-17-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>

x86_32 has been managing node_to_cpumask_map explicitly from
map_cpu_to_node() and friends in a rather ugly way.  With
previous changes, it's now possible to share the code with
64bit.

* When CONFIG_NUMA_EMU is disabled, numa_add/remove_cpu() are
  implemented in numa.c and shared by 32 and 64bit.  CONFIG_NUMA_EMU
  versions still live in numa_64.c.

  NUMA_EMU's dependency on 64bit is planned to be removed and the
  above should go away together.

* identify_cpu() now calls numa_add_cpu() for 32bit too.  This
  makes the explicit mask management from map_cpu_to_node() unnecessary.

* The whole x86_32 specific map_cpu_to_node() chunk is no longer
  necessary.  Dropped.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-16-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>

Unlike 64bit, 32bit has been using its own cpu_to_node_map[] for
CPU -> NUMA node mapping.  Replace it with early_percpu variable
x86_cpu_to_node_map and share the mapping code with 64bit.

* USE_PERCPU_NUMA_NODE_ID is now enabled for 32bit too.

* x86_cpu_to_node_map and numa_set/clear_node() are moved from
  numa_64 to numa.  For now, on 32bit, x86_cpu_to_node_map is initialized
  with 0 instead of NUMA_NO_NODE.  This is to avoid introducing unexpected
  behavior change and will be updated once init path is unified.

* srat_detect_node() is now enabled for x86_32 too.  It calls
  numa_set_node() and initializes the mapping making explicit
  cpu_to_node_map[] updates from map/unmap_cpu_to_node() unnecessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-15-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

The mapping between cpu/apicid and node is done via
apicid_to_node[] on 64bit and apicid_2_node[] +
apic->x86_32_numa_cpu_node() on 32bit. This difference makes it
difficult to further unify 32 and 64bit NUMA handling.

This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed
by two accessors - set_apicid_to_node() and numa_cpu_node().  On
64bit, numa_cpu_node() always consults __apicid_to_node[]
directly while 32bit goes through apic->numa_cpu_node() method
to allow apic implementations to override it.

srat_detect_node() for amd cpus contains workaround for broken
NUMA configuration which assumes relationship between APIC ID,
HT node ID and NUMA topology.  Leave it to access
__apicid_to_node[] directly as mapping through CPU might result
in undesirable behavior change.  The comment is reformatted and
updated to note the ugliness.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

In order to be able to suppress the use of SRAT tables that
32-bit Linux can't deal with (in one case known to lead to a
non-bootable system, unless disabling ACPI altogether), move the
"numa=" option handling to common code.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Reviewed-by: NThomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

"x86, numa: Fake node-to-cpumask for NUMA emulation" broke the
build when CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU
is not.  This is because it is possible to map a cpu to multiple
nodes when NUMA emulation is used; the patch required a physical
node address table to find those nodes that was only available
when CONFIG_NUMA_EMU was enabled.

This extracts the common debug functionality to its own function
for CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
CONFIG_NUMA_EMU is set or not.

NUMA emulation will now iterate over the set of possible nodes
for each cpu and call the new debug function whereas only the
cpu's node will be used without NUMA emulation enabled.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1012301053590.12995@chino.kir.corp.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce init_memory_mapping_high(), and use it with 64bit.

It will go with every memory segment above 4g to create page table to the
memory range itself.

before this patch all page tables was on one node.

with this patch, one RED-PEN is killed

debug out for 8 sockets system after patch
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f750000 page 4k
[    0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff]
[    0.000000] RAMDISK: 7bc84000 - 7f745000
....
[    0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used
[    0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used
[    0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used
[    0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used
[    0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used
[    0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used
[    0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used
[    0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used
[    0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used
[    0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used
[    0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff]
[    0.000000]  0100000000 - 1080000000 page 2M
[    0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff]
[    0.000000]  1080000000 - 2080000000 page 2M
[    0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff]
[    0.000000]  2080000000 - 3080000000 page 2M
[    0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff]
[    0.000000]  3080000000 - 4080000000 page 2M
[    0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff]
[    0.000000]  4080000000 - 5080000000 page 2M
[    0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff]
[    0.000000]  5080000000 - 6080000000 page 2M
[    0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff]
[    0.000000]  6080000000 - 7080000000 page 2M
[    0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff]
[    0.000000]  7080000000 - 8080000000 page 2M
[    0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff]          PGTABLE
[    0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff]
[    0.000000]   NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff]
[    0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff]
[    0.000000]   NODE_DATA [0x0000207ffbb000-0x0000207ffbffff]
[    0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff]
[    0.000000]   NODE_DATA [0x0000307ffbb000-0x0000307ffbffff]
[    0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff]
[    0.000000]   NODE_DATA [0x0000407ffbb000-0x0000407ffbffff]
[    0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff]
[    0.000000]   NODE_DATA [0x0000507ffbb000-0x0000507ffbffff]
[    0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff]
[    0.000000]   NODE_DATA [0x0000607ffbb000-0x0000607ffbffff]
[    0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff]
[    0.000000]   NODE_DATA [0x0000707ffbb000-0x0000707ffbffff]
[    0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff]
[    0.000000]   NODE_DATA [0x0000807ffba000-0x0000807ffbefff]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933D1.9020609@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We need to access it right way, so make sure that it is mapped already.

Prepare to put page table on local node, and nodemap is used before that.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933C8.7060105@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

NUMA boot code assumes that physical node ids start at 0, but the DIMMs
that the apic id represents may not be reachable.  If this is the case,
node 0 is never online and cpus never end up getting appropriately
assigned to a node.  This causes the cpumask of all online nodes to be
empty and machines crash with kernel code assuming online nodes have
valid cpus.

The fix is to appropriately map all the address ranges for physical nodes
and ensure the cpu to node mapping function checks all possible nodes (up
to MAX_NUMNODES) instead of simply checking nodes 0-N, where N is the
number of physical nodes, for valid address ranges.

This requires no longer "compressing" the address ranges of nodes in the
physical node map from 0-N, but rather leave indices in physnodes[] to
represent the actual node id of the physical node.  Accordingly, the
topology exported by both amd_get_nodes() and acpi_get_nodes() no longer
must return the number of nodes to iterate through; all such iterations
will now be to MAX_NUMNODES.

This change also passes the end address of system RAM (which may be
different from normal operation if mem= is specified on the command line)
before the physnodes[] array is populated.  ACPI parsed nodes are
truncated to fit within the address range that respect the mem=
boundaries and even some physical nodes may become unreachable in such
cases.

When NUMA emulation does succeed, any apicid to node mapping that exists
for unreachable nodes are given default values so that proximity domains
can still be assigned.  This is important for node_distance() to
function as desired.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221702090.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

It's necessary to fake the node-to-cpumask mapping so that an emulated
node ID returns a cpumask that includes all cpus that have affinity to
the memory it represents.

This is a little intrusive because it requires knowledge of the physical
topology of the system.  setup_physnodes() gives us that information, but
since NUMA emulation ends up altering the physnodes array, it's necessary
to reset it before cpus are brought online.

Accordingly, the physnodes array is moved out of init.data and into
cpuinit.data since it will be needed on cpuup callbacks.

This works regardless of whether numa=fake is used on the command line,
or the setup of the fake node succeeds or fails.  The physnodes array
always contains the physical topology of the machine if CONFIG_NUMA_EMU
is enabled and can be used to setup the correct node-to-cpumask mappings
in all cases since setup_physnodes() is called whenever the array needs
to be repopulated with the correct data.

To fake the actual mappings, numa_add_cpu() and numa_remove_cpu() are
rewritten for CONFIG_NUMA_EMU so that we first find the physical node to
which each cpu has local affinity, then iterate through all online nodes
to find the emulated nodes that have local affinity to that physical
node, and then finally map the cpu to each of those emulated nodes.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701520.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This patch adds the equivalent of acpi_fake_nodes() for AMD Northbridge
platforms.  The goal is to fake the apicid-to-node mappings for NUMA
emulation so the physical topology of the machine is correctly maintained
within the kernel.

This change also fakes proximity domains for both ACPI and k8 code so the
physical distance between emulated nodes is maintained via
node_distance().  This exports the correct distances via
/sys/devices/system/node/.../distance based on the underlying topology.

A new helper function, fake_physnodes(), is introduced to correctly
invoke the correct NUMA code to fake these two mappings based on the
system type.  If there is no underlying NUMA configuration, all cpus are
mapped to node 0 for local distance.

Since acpi_fake_nodes() is no longer called with CONFIG_ACPI_NUMA, it's
prototype can be removed from the header file for such a configuration.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701360.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Not only the naming of the files was confusing, it was even more so for
the function and variable names.

Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Xen can reserve huge amounts of memory for pre-ballooning, but that
still shows as RAM in the e820 memory map.  early_node_mem could not
find range because of start/end adjusting, and will go through the
fallback path.  However, the fallback patch is still using
memblock_x86_find_range_node(), and it is partially top-down because
it go through active_range entries from low to high.

Let's use memblock_find_in_range instead memblock_x86_find_range_node.
So get real top down in fallback path.

We may still need to make memblock_x86_find_range_node to do overall
top_down work.
Reported-by: NJeremy Fitzhardinge <jeremy@goop.org>
Tested-by: NJeremy Fitzhardinge <jeremy@goop.org>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CC9A9C9.8020700@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The file names are somehow misleading as the code is not specific to
AMD K8 CPUs anymore. The files accomodate code for other AMD CPU
northbridges as well.

Same is true for the config option which is valid for AMD CPU
northbridges in general and not specific to K8.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100917160343.GD4958@loge.amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Requested by Ingo, Thomas and HPA.

The old bootmem code is no longer necessary, and the transition is
complete.  Remove it.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly

-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>