- 17 10月, 2007 40 次提交
-
-
由 Mel Gorman 提交于
Currently mobility grouping works at the MAX_ORDER_NR_PAGES level. This makes sense for the majority of users where this is also the huge page size. However, on platforms like ia64 where the huge page size is runtime configurable it is desirable to group at a lower order. On x86_64 and occasionally on x86, the hugepage size may not always be MAX_ORDER_NR_PAGES. This patch groups pages together based on the value of HUGETLB_PAGE_ORDER. It uses a compile-time constant if possible and a variable where the huge page size is runtime configurable. It is assumed that grouping should be done at the lowest sensible order and that the user would not want to override this. If this is not true, page_block order could be forced to a variable initialised via a boot-time kernel parameter. One potential issue with this patch is that IA64 now parses hugepagesz with early_param() instead of __setup(). __setup() is called after the memory allocator has been initialised and the pageblock bitmaps already setup. In tests on one IA64 there did not seem to be any problem with using early_param() and in fact may be more correct as it guarantees the parameter is handled before the parsing of hugepages=. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NAndy Whitcroft <apw@shadowen.org> Acked-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Grouping high-order atomic allocations together was intended to allow bursty users of atomic allocations to work such as e1000 in situations where their preallocated buffers were depleted. This did not work in at least one case with a wireless network adapter needing order-1 allocations frequently. To resolve that, the free pages used for min_free_kbytes were moved to separate contiguous blocks with the patch bias-the-location-of-pages-freed-for-min_free_kbytes-in-the-same-max_order_nr_pages-blocks. It is felt that keeping the free pages in the same contiguous blocks should be sufficient for bursty short-lived high-order atomic allocations to succeed, maybe even with the e1000. Even if there is a failure, increasing the value of min_free_kbytes will free pages as contiguous bloks in contrast to the standard buddy allocator which makes no attempt to keep the minimum number of free pages contiguous. This patch backs out grouping high order atomic allocations together to determine if it is really needed or not. If a new report comes in about high-order atomic allocations failing, the feature can be reintroduced to determine if it fixes the problem or not. As a side-effect, this patch reduces by 1 the number of bits required to track the mobility type of pages within a MAX_ORDER_NR_PAGES block. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Grouping pages by mobility can be disabled at compile-time. This was considered undesirable by a number of people. However, in the current stack of patches, it is not a simple case of just dropping the configurable patch as it would cause merge conflicts. This patch backs out the configuration option. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
The standard buddy allocator always favours the smallest block of pages. The effect of this is that the pages free to satisfy min_free_kbytes tends to be preserved since boot time at the same location of memory ffor a very long time and as a contiguous block. When an administrator sets the reserve at 16384 at boot time, it tends to be the same MAX_ORDER blocks that remain free. This allows the occasional high atomic allocation to succeed up until the point the blocks are split. In practice, it is difficult to split these blocks but when they do split, the benefit of having min_free_kbytes for contiguous blocks disappears. Additionally, increasing min_free_kbytes once the system has been running for some time has no guarantee of creating contiguous blocks. On the other hand, CONFIG_PAGE_GROUP_BY_MOBILITY favours splitting large blocks when there are no free pages of the appropriate type available. A side-effect of this is that all blocks in memory tends to be used up and the contiguous free blocks from boot time are not preserved like in the vanilla allocator. This can cause a problem if a new caller is unwilling to reclaim or does not reclaim for long enough. A failure scenario was found for a wireless network device allocating order-1 atomic allocations but the allocations were not intense or frequent enough for a whole block of pages to be preserved for MIGRATE_HIGHALLOC. This was reproduced on a desktop by booting with mem=256mb, forcing the driver to allocate at order-1, running a bittorrent client (downloading a debian ISO) and building a kernel with -j2. This patch addresses the problem on the desktop machine booted with mem=256mb. It works by setting aside a reserve of MAX_ORDER_NR_PAGES blocks, the number of which depends on the value of min_free_kbytes. These blocks are only fallen back to when there is no other free pages. Then the smallest possible page is used just like the normal buddy allocator instead of the largest possible page to preserve contiguous pages The pages in free lists in the reserve blocks are never taken for another migrate type. The results is that even if min_free_kbytes is set to a low value, contiguous blocks will be preserved in the MIGRATE_RESERVE blocks. This works better than the vanilla allocator because if min_free_kbytes is increased, a new reserve block will be chosen based on the location of reclaimable pages and the block will free up as contiguous pages. In the vanilla allocator, no effort is made to target a block of pages to free as contiguous pages and min_free_kbytes pages are scattered randomly. This effect has been observed on the test machine. min_free_kbytes was set initially low but it was kept as a contiguous free block within MIGRATE_RESERVE. min_free_kbytes was then set to a higher value and over a period of time, the free blocks were within the reserve and coalescing. How long it takes to free up depends on how quickly LRU is rotating. Amusingly, this means that more activity will free the blocks faster. This mechanism potentially replaces MIGRATE_HIGHALLOC as it may be more effective than grouping contiguous free pages together. It all depends on whether the number of active atomic high allocations exceeds min_free_kbytes or not. If the number of active allocations exceeds min_free_kbytes, it's worth it but maybe in that situation, min_free_kbytes should be set higher. Once there are no more reports of allocation failures, a patch will be submitted that backs out MIGRATE_HIGHALLOC and see if the reports stay missing. Credit to Mariusz Kozlowski for discovering the problem, describing the failure scenario and testing patches and scenarios. [akpm@linux-foundation.org: cleanups] Signed-off-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
There are problems in the use of SPARSEMEM and pageblock flags that causes problems on ia64. The first part of the problem is that units are incorrect in SECTION_BLOCKFLAGS_BITS computation. This results in a map_section's section_mem_map being treated as part of a bitmap which isn't good. This was evident with an invalid virtual address when mem_init attempted to free bootmem pages while relinquishing control from the bootmem allocator. The second part of the problem occurs because the pageblock flags bitmap is be located with the mem_section. The SECTIONS_PER_ROOT computation using sizeof (mem_section) may not be a power of 2 depending on the size of the bitmap. This renders masks and other such things not power of 2 base. This issue was seen with SPARSEMEM_EXTREME on ia64. This patch moves the bitmap outside of mem_section and uses a pointer instead in the mem_section. The bitmaps are allocated when the section is being initialised. Note that sparse_early_usemap_alloc() does not use alloc_remap() like sparse_early_mem_map_alloc(). The allocation required for the bitmap on x86, the only architecture that uses alloc_remap is typically smaller than a cache line. alloc_remap() pads out allocations to the cache size which would be a needless waste. Credit to Bob Picco for identifying the original problem and effecting a fix for the SECTION_BLOCKFLAGS_BITS calculation. Credit to Andy Whitcroft for devising the best way of allocating the bitmaps only when required for the section. [wli@holomorphy.com: warning fix] Signed-off-by: NBob Picco <bob.picco@hp.com> Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NMel Gorman <mel@csn.ul.ie> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NWilliam Irwin <bill.irwin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
In rare cases, the kernel needs to allocate a high-order block of pages without sleeping. For example, this is the case with e1000 cards configured to use jumbo frames. Migrating or reclaiming pages in this situation is not an option. This patch groups these allocations together as much as possible by adding a new MIGRATE_TYPE. The MIGRATE_HIGHATOMIC type are exactly what they sound like. Care is taken that pages of other migrate types do not use the same blocks as high-order atomic allocations. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
This patch marks a number of allocations that are either short-lived such as network buffers or are reclaimable such as inode allocations. When something like updatedb is called, long-lived and unmovable kernel allocations tend to be spread throughout the address space which increases fragmentation. This patch groups these allocations together as much as possible by adding a new MIGRATE_TYPE. The MIGRATE_RECLAIMABLE type is for allocations that can be reclaimed on demand, but not moved. i.e. they can be migrated by deleting them and re-reading the information from elsewhere. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
The grouping mechanism has some memory overhead and a more complex allocation path. This patch allows the strategy to be disabled for small memory systems or if it is known the workload is suffering because of the strategy. It also acts to show where the page groupings strategy interacts with the standard buddy allocator. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
This patch adds the core of the fragmentation reduction strategy. It works by grouping pages together based on their ability to migrate or be reclaimed. Basically, it works by breaking the list in zone->free_area list into MIGRATE_TYPES number of lists. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Here is the latest revision of the anti-fragmentation patches. Of particular note in this version is special treatment of high-order atomic allocations. Care is taken to group them together and avoid grouping pages of other types near them. Artifical tests imply that it works. I'm trying to get the hardware together that would allow setting up of a "real" test. If anyone already has a setup and test that can trigger the atomic-allocation problem, I'd appreciate a test of these patches and a report. The second major change is that these patches will apply cleanly with patches that implement anti-fragmentation through zones. kernbench shows effectively no performance difference varying between -0.2% and +2% on a variety of test machines. Success rates for huge page allocation are dramatically increased. For example, on a ppc64 machine, the vanilla kernel was only able to allocate 1% of memory as a hugepage and this was due to a single hugepage reserved as min_free_kbytes. With these patches applied, 17% was allocatable as superpages. With reclaim-related fixes from Andy Whitcroft, it was 40% and further reclaim-related improvements should increase this further. Changelog Since V28 o Group high-order atomic allocations together o It is no longer required to set min_free_kbytes to 10% of memory. A value of 16384 in most cases will be sufficient o Now applied with zone-based anti-fragmentation o Fix incorrect VM_BUG_ON within buffered_rmqueue() o Reorder the stack so later patches do not back out work from earlier patches o Fix bug were journal pages were being treated as movable o Bias placement of non-movable pages to lower PFNs o More agressive clustering of reclaimable pages in reactions to workloads like updatedb that flood the size of inode caches Changelog Since V27 o Renamed anti-fragmentation to Page Clustering. Anti-fragmentation was giving the mistaken impression that it was the 100% solution for high order allocations. Instead, it greatly increases the chances high-order allocations will succeed and lays the foundation for defragmentation and memory hot-remove to work properly o Redefine page groupings based on ability to migrate or reclaim instead of basing on reclaimability alone o Get rid of spurious inits o Per-cpu lists are no longer split up per-type. Instead the per-cpu list is searched for a page of the appropriate type o Added more explanation commentary o Fix up bug in pageblock code where bitmap was used before being initalised Changelog Since V26 o Fix double init of lists in setup_pageset Changelog Since V25 o Fix loop order of for_each_rclmtype_order so that order of loop matches args o gfpflags_to_rclmtype uses gfp_t instead of unsigned long o Rename get_pageblock_type() to get_page_rclmtype() o Fix alignment problem in move_freepages() o Add mechanism for assigning flags to blocks of pages instead of page->flags o On fallback, do not examine the preferred list of free pages a second time The purpose of these patches is to reduce external fragmentation by grouping pages of related types together. When pages are migrated (or reclaimed under memory pressure), large contiguous pages will be freed. This patch works by categorising allocations by their ability to migrate; Movable - The pages may be moved with the page migration mechanism. These are generally userspace pages. Reclaimable - These are allocations for some kernel caches that are reclaimable or allocations that are known to be very short-lived. Unmovable - These are pages that are allocated by the kernel that are not trivially reclaimed. For example, the memory allocated for a loaded module would be in this category. By default, allocations are considered to be of this type HighAtomic - These are high-order allocations belonging to callers that cannot sleep or perform any IO. In practice, this is restricted to jumbo frame allocation for network receive. It is assumed that the allocations are short-lived Instead of having one MAX_ORDER-sized array of free lists in struct free_area, there is one for each type of reclaimability. Once a 2^MAX_ORDER block of pages is split for a type of allocation, it is added to the free-lists for that type, in effect reserving it. Hence, over time, pages of the different types can be clustered together. When the preferred freelists are expired, the largest possible block is taken from an alternative list. Buddies that are split from that large block are placed on the preferred allocation-type freelists to mitigate fragmentation. This implementation gives best-effort for low fragmentation in all zones. Ideally, min_free_kbytes needs to be set to a value equal to 4 * (1 << (MAX_ORDER-1)) pages in most cases. This would be 16384 on x86 and x86_64 for example. Our tests show that about 60-70% of physical memory can be allocated on a desktop after a few days uptime. In benchmarks and stress tests, we are finding that 80% of memory is available as contiguous blocks at the end of the test. To compare, a standard kernel was getting < 1% of memory as large pages on a desktop and about 8-12% of memory as large pages at the end of stress tests. Following this email are 12 patches that implement thie page grouping feature. The first patch introduces a mechanism for storing flags related to a whole block of pages. Then allocations are split between movable and all other allocations. Following that are patches to deal with per-cpu pages and make the mechanism configurable. The next patch moves free pages between lists when partially allocated blocks are used for pages of another migrate type. The second last patch groups reclaimable kernel allocations such as inode caches together. The final patch related to groupings keeps high-order atomic allocations. The last two patches are more concerned with control of fragmentation. The second last patch biases placement of non-movable allocations towards the start of memory. This is with a view of supporting memory hot-remove of DIMMs with higher PFNs in the future. The biasing could be enforced a lot heavier but it would cost. The last patch agressively clusters reclaimable pages like inode caches together. The fragmentation reduction strategy needs to track if pages within a block can be moved or reclaimed so that pages are freed to the appropriate list. This patch adds a bitmap for flags affecting a whole a MAX_ORDER block of pages. In non-SPARSEMEM configurations, the bitmap is stored in the struct zone and allocated during initialisation. SPARSEMEM statically allocates the bitmap in a struct mem_section so that bitmaps do not have to be resized during memory hotadd. This wastes a small amount of memory per unused section (usually sizeof(unsigned long)) but the complexity of dynamically allocating the memory is quite high. Additional credit to Andy Whitcroft who reviewed up an earlier implementation of the mechanism an suggested how to make it a *lot* cleaner. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after* set_pte(). This is too late. This patch removes lazy_mmu_prot_update and add modfied set_pte() for flushing if necessary. This patch flush icache of a page when new pte has exec bit. && new pte has present bit && new pte is user's page. && (old *ptep is not present || new pte's pfn is not same to old *ptep's ptn) && new pte's page has no Pg_arch_1 bit. Pg_arch_1 is set when a page is cache consistent. I think this condition checks are much easier to understand than considering "Where sync_icache_dcache() should be inserted ?". pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as clean-up. So, I added it again. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
The function of GFP_LEVEL_MASK seems to be unclear. In order to clear up the mystery we get rid of it and replace GFP_LEVEL_MASK with 3 sets of GFP flags: GFP_RECLAIM_MASK Flags used to control page allocator reclaim behavior. GFP_CONSTRAINT_MASK Flags used to limit where allocations can occur. GFP_SLAB_BUG_MASK Flags that the slab allocator BUG()s on. These replace the uses of GFP_LEVEL mask in the slab allocators and in vmalloc.c. The use of the flags not included in these sets may occur as a result of a slab allocation standing in for a page allocation when constructing scatter gather lists. Extraneous flags are cleared and not passed through to the page allocator. __GFP_MOVABLE/RECLAIMABLE, __GFP_COLD and __GFP_COMP will now be ignored if passed to a slab allocator. Change the allocation of allocator meta data in SLAB and vmalloc to not pass through flags listed in GFP_CONSTRAINT_MASK. SLAB already removes the __GFP_THISNODE flag for such allocations. Generalize that to also cover vmalloc. The use of GFP_CONSTRAINT_MASK also includes __GFP_HARDWALL. The impact of allocator metadata placement on access latency to the cachelines of the object itself is minimal since metadata is only referenced on alloc and free. The attempt is still made to place the meta data optimally but we consistently allow fallback both in SLAB and vmalloc (SLUB does not need to allocate metadata like that). Allocator metadata may serve multiple in kernel users and thus should not be subject to the limitations arising from a single allocation context. [akpm@linux-foundation.org: fix fallback_alloc()] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
cpusets try to ensure that any node added to a cpuset's mems_allowed is on-line and contains memory. The assumption was that online nodes contained memory. Thus, it is possible to add memoryless nodes to a cpuset and then add tasks to this cpuset. This results in continuous series of oom-kill and apparent system hang. Change cpusets to use node_states[N_HIGH_MEMORY] [a.k.a. node_memory_map] in place of node_online_map when vetting memories. Return error if admin attempts to write a non-empty mems_allowed node mask containing only memoryless-nodes. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: NBob Picco <bob.picco@hp.com> Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
GFP_THISNODE checks that the zone selected is within the pgdat (node) of the first zone of a nodelist. That only works if the node has memory. A memoryless node will have its first node on another pgdat (node). GFP_THISNODE currently will return simply memory on the first pgdat. Thus it is returning memory on other nodes. GFP_THISNODE should fail if there is no local memory on a node. Add a new set of zonelists for each node that only contain the nodes that belong to the zones itself so that no fallback is possible. Then modify gfp_type to pickup the right zone based on the presence of __GFP_THISNODE. Drop the existing GFP_THISNODE checks from the page_allocators hot path. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Acked-by: NNishanth Aravamudan <nacc@us.ibm.com> Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NBob Picco <bob.picco@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
We need the check for a node with cpu in zone reclaim. Zone reclaim will not allow remote zone reclaim if a node has a cpu. [Lee.Schermerhorn@hp.com: Move setup of N_CPU node state mask] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NBob Picco <bob.picco@hp.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
It is necessary to know if nodes have memory since we have recently begun to add support for memoryless nodes. For that purpose we introduce a two new node states: N_HIGH_MEMORY and N_NORMAL_MEMORY. A node has its bit in N_HIGH_MEMORY set if it has any memory regardless of the type of mmemory. If a node has memory then it has at least one zone defined in its pgdat structure that is located in the pgdat itself. A node has its bit in N_NORMAL_MEMORY set if it has a lower zone than ZONE_HIGHMEM. This means it is possible to allocate memory that is not subject to kmap. N_HIGH_MEMORY and N_NORMAL_MEMORY can then be used in various places to insure that we do the right thing when we encounter a memoryless node. [akpm@linux-foundation.org: build fix] [Lee.Schermerhorn@hp.com: update N_HIGH_MEMORY node state for memory hotadd] [y-goto@jp.fujitsu.com: Fix memory hotplug + sparsemem build] Signed-off-by: NLee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NChristoph Lameter <clameter@sgi.com> Acked-by: NBob Picco <bob.picco@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Why do we need to support memoryless nodes? KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote: > For fujitsu, problem is called "empty" node. > > When ACPI's SRAT table includes "possible nodes", ia64 bootstrap(acpi_numa_init) > creates nodes, which includes no memory, no cpu. > > I tried to remove empty-node in past, but that was denied. > It was because we can hot-add cpu to the empty node. > (node-hotplug triggered by cpu is not implemented now. and it will be ugly.) > > > For HP, (Lee can comment on this later), they have memory-less-node. > As far as I hear, HP's machine can have following configration. > > (example) > Node0: CPU0 memory AAA MB > Node1: CPU1 memory AAA MB > Node2: CPU2 memory AAA MB > Node3: CPU3 memory AAA MB > Node4: Memory XXX GB > > AAA is very small value (below 16MB) and will be omitted by ia64 bootstrap. > After boot, only Node 4 has valid memory (but have no cpu.) > > Maybe this is memory-interleave by firmware config. Christoph Lameter <clameter@sgi.com> wrote: > Future SGI platforms (actually also current one can have but nothing like > that is deployed to my knowledge) have nodes with only cpus. Current SGI > platforms have nodes with just I/O that we so far cannot manage in the > core. So the arch code maps them to the nearest memory node. Lee Schermerhorn <Lee.Schermerhorn@hp.com> wrote: > For the HP platforms, we can configure each cell with from 0% to 100% > "cell local memory". When we configure with <100% CLM, the "missing > percentages" are interleaved by hardware on a cache-line granularity to > improve bandwidth at the expense of latency for numa-challenged > applications [and OSes, but not our problem ;-)]. When we boot Linux on > such a config, all of the real nodes have no memory--it all resides in a > single interleaved pseudo-node. > > When we boot Linux on a 100% CLM configuration [== NUMA], we still have > the interleaved pseudo-node. It contains a few hundred MB stolen from > the real nodes to contain the DMA zone. [Interleaved memory resides at > phys addr 0]. The memoryless-nodes patches, along with the zoneorder > patches, support this config as well. > > Also, when we boot a NUMA config with the "mem=" command line, > specifying less memory than actually exists, Linux takes the excluded > memory "off the top" rather than distributing it across the nodes. This > can result in memoryless nodes, as well. > This patch: Preparation for memoryless node patches. Provide a generic way to keep nodemasks describing various characteristics of NUMA nodes. Remove the node_online_map and the node_possible map and realize the same functionality using two nodes stats: N_POSSIBLE and N_ONLINE. [Lee.Schermerhorn@hp.com: Initialize N_*_MEMORY and N_CPU masks for non-NUMA config] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NBob Picco <bob.picco@hp.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
prepare/commit_write no longer returns AOP_TRUNCATED_PAGE since OCFS2 and GFS2 were converted to the new aops, so we can make some simplifications for that. [michal.k.k.piotrowski@gmail.com: fix warning] Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Implement nobh in new aops. This is a bit tricky. FWIW, nobh_truncate is now implemented in a way that does not create blocks in sparse regions, which is a silly thing for it to have been doing (isn't it?) ext2 survives fsx and fsstress. jfs is converted as well... ext3 should be easy to do (but not done yet). [akpm@linux-foundation.org: coding-style fixes] Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Rework the generic block "cont" routines to handle the new aops. Supporting cont_prepare_write would take quite a lot of code to support, so remove it instead (and we later convert all filesystems to use it). write_begin gets passed AOP_FLAG_CONT_EXPAND when called from generic_cont_expand, so filesystems can avoid the old hacks they used. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
These are intended to replace prepare_write and commit_write with more flexible alternatives that are also able to avoid the buffered write deadlock problems efficiently (which prepare_write is unable to do). [mark.fasheh@oracle.com: API design contributions, code review and fixes] [akpm@linux-foundation.org: various fixes] [dmonakhov@sw.ru: new aop block_write_begin fix] Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Signed-off-by: NDmitriy Monakhov <dmonakhov@openvz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Add an iterator data structure to operate over an iovec. Add usercopy operators needed by generic_file_buffered_write, and convert that function over. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Modify the core write() code so that it won't take a pagefault while holding a lock on the pagecache page. There are a number of different deadlocks possible if we try to do such a thing: 1. generic_buffered_write 2. lock_page 3. prepare_write 4. unlock_page+vmtruncate 5. copy_from_user 6. mmap_sem(r) 7. handle_mm_fault 8. lock_page (filemap_nopage) 9. commit_write 10. unlock_page a. sys_munmap / sys_mlock / others b. mmap_sem(w) c. make_pages_present d. get_user_pages e. handle_mm_fault f. lock_page (filemap_nopage) 2,8 - recursive deadlock if page is same 2,8;2,8 - ABBA deadlock is page is different 2,6;b,f - ABBA deadlock if page is same The solution is as follows: 1. If we find the destination page is uptodate, continue as normal, but use atomic usercopies which do not take pagefaults and do not zero the uncopied tail of the destination. The destination is already uptodate, so we can commit_write the full length even if there was a partial copy: it does not matter that the tail was not modified, because if it is dirtied and written back to disk it will not cause any problems (uptodate *means* that the destination page is as new or newer than the copy on disk). 1a. The above requires that fault_in_pages_readable correctly returns access information, because atomic usercopies cannot distinguish between non-present pages in a readable mapping, from lack of a readable mapping. 2. If we find the destination page is non uptodate, unlock it (this could be made slightly more optimal), then allocate a temporary page to copy the source data into. Relock the destination page and continue with the copy. However, instead of a usercopy (which might take a fault), copy the data from the pinned temporary page via the kernel address space. (also, rename maxlen to seglen, because it was confusing) This increases the CPU/memory copy cost by almost 50% on the affected workloads. That will be solved by introducing a new set of pagecache write aops in a subsequent patch. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lee Schermerhorn 提交于
Allow an application to query the memories allowed by its context. Updated numa_memory_policy.txt to mention that applications can use this to obtain allowed memories for constructing valid policies. TODO: update out-of-tree libnuma wrapper[s], or maybe add a new wrapper--e.g., numa_get_mems_allowed() ? Also, update numa syscall man pages. Tested with memtoy V>=0.13. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin Schwidefsky 提交于
Move the definitions of struct mm_struct and struct vma_area_struct to include/mm_types.h. This allows to define more function in asm/pgtable.h and friends with inline assemblies instead of macros. Compile tested on i386, powerpc, powerpc64, s390-32, s390-64 and x86_64. [aurelien@aurel32.net: build fix] Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Rather than sign direct radix-tree pointers with a special bit, sign the indirect one that hangs off the root. This means that, given a lookup_slot operation, the invalid result will be differentiated from the valid (previously, valid results could have the bit either set or clear). This does not affect slot lookups which occur under lock -- they can never return an invalid result. Is needed in future for lockless pagecache. Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
The commit b5810039 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus "snif" Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
This gets rid of all kmalloc caches larger than page size. A kmalloc request larger than PAGE_SIZE > 2 is going to be passed through to the page allocator. This works both inline where we will call __get_free_pages instead of kmem_cache_alloc and in __kmalloc. kfree is modified to check if the object is in a slab page. If not then the page is freed via the page allocator instead. Roughly similar to what SLOB does. Advantages: - Reduces memory overhead for kmalloc array - Large kmalloc operations are faster since they do not need to pass through the slab allocator to get to the page allocator. - Performance increase of 10%-20% on alloc and 50% on free for PAGE_SIZEd allocations. SLUB must call page allocator for each alloc anyways since the higher order pages which that allowed avoiding the page alloc calls are not available in a reliable way anymore. So we are basically removing useless slab allocator overhead. - Large kmallocs yields page aligned object which is what SLAB did. Bad things like using page sized kmalloc allocations to stand in for page allocate allocs can be transparently handled and are not distinguishable from page allocator uses. - Checking for too large objects can be removed since it is done by the page allocator. Drawbacks: - No accounting for large kmalloc slab allocations anymore - No debugging of large kmalloc slab allocations. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Convert some 'unsigned long' to pgoff_t. Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Remove VM_MAX_CACHE_HIT, MAX_RA_PAGES and MIN_RA_PAGES. Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Introduce radix_tree_next_hole(root, index, max_scan) to scan radix tree for the first hole. It will be used in interleaved readahead. The implementation is dumb and obviously correct. It can help debug(and document) the possible smart one in future. Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Combine the file_ra_state members unsigned long prev_index unsigned int prev_offset into loff_t prev_pos It is more consistent and better supports huge files. Thanks to Peter for the nice proposal! [akpm@linux-foundation.org: fix shift overflow] Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Fold file_ra_state.mmap_hit into file_ra_state.mmap_miss and make it an int. Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Use 'unsigned int' instead of 'unsigned long' for readahead sizes. This helps reduce memory consumption on 64bit CPU when a lot of files are opened. CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Juhl 提交于
This patch cleans up duplicate includes in include/linux/memory_hotplug.h Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Whitcroft 提交于
Enable virtual memmap support for SPARSEMEM on PPC64 systems. Slice a 16th off the end of the linear mapping space and use that to hold the vmemmap. Uses the same size mapping as uses in the linear 1:1 kernel mapping. [pbadari@gmail.com: fix warning] Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Acked-by: NMel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Miller 提交于
[apw@shadowen.org: style fixups] [apw@shadowen.org: vmemmap sparc64: convert to new config options] Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Acked-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Equip IA64 sparsemem with a virtual memmap. This is similar to the existing CONFIG_VIRTUAL_MEM_MAP functionality for DISCONTIGMEM. It uses a PAGE_SIZE mapping. This is provided as a minimally intrusive solution. We split the 128TB VMALLOC area into two 64TB areas and use one for the virtual memmap. This should replace CONFIG_VIRTUAL_MEM_MAP long term. [apw@shadowen.org: convert to new helper based initialisation] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Acked-by: NMel Gorman <mel@csn.ul.ie> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
x86_64 uses 2M page table entries to map its 1-1 kernel space. We also implement the virtual memmap using 2M page table entries. So there is no additional runtime overhead over FLATMEM, initialisation is slightly more complex. As FLATMEM still references memory to obtain the mem_map pointer and SPARSEMEM_VMEMMAP uses a compile time constant, SPARSEMEM_VMEMMAP should be superior. With this SPARSEMEM becomes the most efficient way of handling virt_to_page, pfn_to_page and friends for UP, SMP and NUMA on x86_64. [apw@shadowen.org: code resplit, style fixups] [apw@shadowen.org: vmemmap x86_64: ensure end of section memmap is initialised] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Acked-by: NMel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-