It appears that under certain circumstances, a race will result
in a double-free of an skb. This patch null's out the skb pointer
upon the skb free, avoiding the inadvertent deref of bogus data.
The next patch fixes the actual race.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch separates the hardware descriptor state from the
driver descriptor state, per (old) suggestion from Ben Herrenschmidt.
This compiles and boots and seems to work.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This moves the medium variable into the spidernet card structure.
It renames the GMII_ variables to BCM54XX specific ones.
Signed-off-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patches removes logging for SPIDER_NET_GTMFLLINT interrupts.
Since the interrupts are not irregular, and they happen frequently
when using 100Mbps network switches.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch adds or changes some HW specific settings for spider_net on
Celleb.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch moves calling init_firmware() from spider_net_probe() to
spider_net_open() so as to use the driver by built-in.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add auto negotiation support for Celleb.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

As of 2.6.20-git4, the spider_net driver does not compile.
This appears to be due to some archaic usage involving kobjects.

It also fixes a nasty double-free during ifdown of the interface.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This version moves the medium variable to the card specific structure and
changes the GMII_* to BCM54XX_* #defines.

This patch adds improved version of enable_fiber for both the 5421 and
the 5461 phy. It is now possible to specify with these wether you want
autonegotiation or not. This is needed for bladecenter switches where
some expect autonegotiation and some dont seem to like this at all.
Depending on this flag it sets phy->autoneg accordingly for the fiber mode.

More importantly it implements proper read_link and poll_link functions
for both phys which can handle both copper and fiber mode by determining
the medium first and then branching to the required functions. For fiber
they all work fine, for copper they are not tested but return the result
of the genmii_* function anyway which is supposed to work.

The patch moves the genmii_* functions around to avoid foreward declarations.
Signed-off-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch removes checksum offload feature in mcp65 chipsets as they
are not supported in hw.
Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

There seems to be an issue when both MSI-X is enabled and NAPI is
configured. This patch disables MSI-X until the issue is root caused.
Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The napi poll routine was missing the call to the optimized rx process
routine. This patch adds the missing call for the optimized path.
Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* clear_page() use is wrong.  We might have multiple pages.
  Use memset() instead.
* Call pci_unregister_driver() in module exit.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Delete the definition of the apparently unreferenced macro _IOC_SLMASK.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Use MIPS_CPU_IRQ_BASE instead of own define.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This change is purely cosmetical.
Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

pcibios_fixup_device_resources() is called by pcibios_fixup_bus() which is
marked as __devinit.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Many Makefiles in arch/mips have EXTRA_AFLAGS := $(CFLAGS) line.  This
is redundant while AFLAGS contains $(cflags-y) and any options only
listed in CFLAGS (not in cflags-y) should be unnecessary for asm
sources.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (51 commits)
  [libata] bump versions
  [libata] Trim trailing whitespace.
  [libata] sata_mv: Fix 50xx irq mask
  [libata] sata_mv: don't touch reserved bits in EDMA config register
  libata: Use new id_to_dma_mode function to tidy reporting in more drivers (minimally tested)
  pata_pcmcia: Fix oops in 2.6.21-rc1
  Add id_to_dma_mode function for printing DMA modes
  sata_promise: simplify port setup
  sata_promise: fix 20619 new EH merge error
  [libata] ACPI: remove needless ->qc_issue hook existence test
  sata_vsc: refactor vsc_sata_interrupt and hook up error handling
  sata_sil: ignore and clear spurious IRQs while executing commands by polling
  sata_mv: fix pci_enable_msi() error handling
  pata_amd: fix an obvious bug in cable detection
  [libata] ata_piix: remove duplicate PCI IDs
  sata_nv: complain on spurious completion notifiers
  libata: test major version in ata_id_is_sata()
  sata_nv: kill old private BMDMA helper functions
  libata: fix remaining ap->id
  ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated)
  ...

This reverts commit aeeddc14, which was
half-baked and broken.  It just resulted in compile errors, since
cpufreq_register_driver() still changes the 'driver_data' by setting
bits in the flags field.  So claiming it is 'const' _really_ doesn't
work.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] constify some data tables.
  [CPUFREQ] constify cpufreq_driver where possible.
  {rd,wr}msr_on_cpu SMP=n optimization
  [CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAR
  rdmsr_on_cpu, wrmsr_on_cpu
  [CPUFREQ] Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] CLPS7500 doesn't have IO ports
  [ARM] Fix more apm-emulation.h
  [ARM] 4234/1: Introduce get_irqnr_preamble and arch_ret_to_user for ns9xxx.
  [ARM] 4233/1: nand/s3c2410.c: warning fix
  [ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be TEXT_OFFSET
  [ARM] 4224/2: allow XIP kernel to boot again
  [ARM] 4232/1: AT91: Generic GPIO bug
  [ARM] 4231/1: AT91: Merge and typo fixes.
  [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig
  [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Correct debugging output when path record lookup fails
  RDMA/cxgb3: Stop the EP Timer on BAD CLOSE
  RDMA/cxgb3: cleanups
  RDMA/cma: Remove unused node_guid from cma_device structure
  IB/cm: Remove ca_guid from cm_device structure
  RDMA/cma: Request reversible paths only
  IB/core: Set hop limit in ib_init_ah_from_wc correctly
  IB/uverbs: Return correct error for invalid PD in register MR
  IPoIB: Remove unused local_rate tracking
  IPoIB/cm: Improve small message bandwidth
  IB/mthca: Make 2 functions static

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The change to the devres layer re-orders the execution of cleanup
functions and in turn causes the pcmcia layer to oops as it zaps a
pointer now needed later on. We simply leave the pointer alone.
Signed-off-by: NAlan Cox <alan@redhat.com>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Paulus preferred this over #defining NO_IRQ in the file, since that's
0 for powerpc anyway.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If path_rec_completion() is passed a non-NULL path record pointer
along with an unsuccessful status value, the tracing code incorrectly
prints the (invalid) DLID from the path record rather than the more
interesting status code.  The actual logic of the function correctly
uses the path record only if the status indicates a successful lookup.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Toralf Förster pointed out that drivers/video/s3fb.c would fail to compile:
> ...
>   CC      drivers/video/s3fb.o
> drivers/video/s3fb.c: In function `s3_pci_remove':
> drivers/video/s3fb.c:1003: warning: unused variable `par'
> drivers/video/s3fb.c: In function `s3fb_setup':
> drivers/video/s3fb.c:1141: error: `mtrr' undeclared (first use in this function)
> drivers/video/s3fb.c:1141: error: (Each undeclared identifier is reported only once
> drivers/video/s3fb.c:1141: error: for each function it appears in.)
> make[2]: *** [drivers/video/s3fb.o] Error 1
> make[1]: *** [drivers/video] Error 2
> make: *** [drivers] Error 2

Here is fix, it also fixes broken boot options.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jeremy Fitzhardinge suggested the use of -freg-struct-return, which does
structure-returns (such as when using pte_t) in registers instead of on
the stack.

that is indeed so, and this option reduced the kernel size a bit:

    text    data     bss     dec     hex filename
 4799506  543456 3760128 9103090  8ae6f2 vmlinux.before
 4798117  543456 3760128 9101701  8ae185 vmlinux.after

the resulting kernel booted fine on my testbox. Lets go for it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Thomas is the maintainer and primary author of the high-res timers,
clockevents and dynticks code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>