Module id is a property of firmware manifest and can vary between
platforms so use the uuid instead of module id for pins.
Signed-off-by: NSriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Modify skl_tplg_get_uuid() to copy just UUID rather than only
for module UUID and skl_tplg_fill_pin() to fill the pin info
which can include UUID token also.
Signed-off-by: NSriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In case of failure in loading customize topology firmware, dfw_sst.bin
gets loaded. However, current log provides this message as error even
after successfully falling back to default topology "dfw_sst.bin".

Hence to convey proper message, changing log level and message.
Signed-off-by: NChintan Patel <chintan.m.patel@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Since FE dais can come from topology, add dai_load ops
for the dais from topology.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

A dsp path and the modules in the path can support various pcm
configurations. The list of supported pcm configurations from topology
manifest would be stored and later selected runtime based on the hw
pcm params. For legacy, module data is filled in the 0th index of
resource and interface table.

To accommodate both models, change the relevant structures and populate
them by parsing newly defined tokens. This change is backward compatible
with the existing model where driver computes the resources required by
each dsp module.
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

All the module common data will now be populated in the topology
manifest. This includes the resource and interface list supported by
the module. With this, driver need not compute the resources required
by each dsp module for a particular pcm parameter since it comes as a
part of the topology manifest.

So, add functions to parse the manifest tokens to populate the module
config data structure.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Format resource tokens can be a part of either the widget or manifest
private data. In the current model, format resources come as a part of
widget private data and they come as a part of topology manifest in the
newly introduced model.

So add a common function that can fill up either of the structures.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Currently we can parse a single manifest data block. But manifest
private data can have multiple data blocks.

So, fix the parsing logic to parse multiple data blocks by returning
offset of each parsed data block.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to manage additional cores on a demand basis.
For instance, if module is set to run on certain core, the particular
core is powered up in module init. The same is again powered down in
module unload.
Signed-off-by: NPardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Check if the next sink is not null to avoid potential null pointer
dereference in skl_tplg_bind_sinks().
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Driver modules have lot of information represented in struct
skl_module_cfg. Knowing this is useful for debug, so enable
debugfs for this structure.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

With this patch, the dma buffer size is fetched from topology binary. This
buffer size is applicable for gateway copier modules.

Now that we can configure DSP dma buffer size, the device can support deep
buffer playback. DSP fetches large buffer and can result fewer wakes,
which helps in power reduction.
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

User may prefer to select data from particular mics. A mic-select module
in DSP allows this selection.

Create possible enum controls to allow user to select a combination of
mics to capture data from. Based on the user selection, parameters are
generated and passed to mic-select module during init.
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Module init params are additional data block in the module private data.
Skylake driver doesn't yet have support to parse multiple data blocks if
it appears in private data. Add support for parsing of multiple data
blocks and module init params.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Element size in the manifest should be updated for each token, so that the
loop can parse all the string elements in the manifest. This was not
happening when more than two string elements appear consecutively, as it is
not updated with correct string element size. Fixed with this patch.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

skl_tplg_add_pipe() returned EEXIST instead of negative EEXIST, so fix that
and handle the return value as well.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NMark Brown <broonie@kernel.org>

We need to use the _safe() version of list_for_each_entry() here because
of the kfree(modules).

Fixes: b8c722dd ("ASoC: Intel: Skylake: Add support for deferred DSP module bind")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Module at the end of DSP pipeline that needs to be connected to a module
in another pipeline are represented as a PGA(leaf node) and in PGA event
handler these modules are bound/unbounded. Modules other than PGA leaf
can be connected directly or via switch to a module in another pipeline.
Example: reference path.

To support the deferred DSP module bind, following changes are done:
o When the path is enabled, the destination module that needs to be
bound may not be initialized. If the module is not initialized, add
these modules in a deferred bind list.
o When the destination module is initialized, check for these modules
in deferred bind list. If found, bind them.
o When the destination module is deleted, Unbind the modules.
o When the source module is deleted, remove the entry from the deferred
bind list.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When DSP module is unbound, the module state needs to be in INIT_DONE
state instead of UNINT. Also the state needs to be set to UNINIT after
module is deleted from DSP pipeline.

So, set the module state to INIT_DONE after unbind and then UNINIT after
module is deleted.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Skylake driver topology header/driver structure is referenced and used
in SST library which creates circular dependency. Hence the
rearrangement.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Initially vmixer and mixer widget handlers were bit different, but over
time they became same so remove the duplicate code.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For calculating the HDA DMA format, use the max_bps supported by the
DAI caps instead of fixing it to 32/24. For host DMA the Max bps support
is 32, but in case of link DMA, this depends on the codec capability.
So use the sig_bits to define the bps supported by dai.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

KPB module default parameter were overwritten by the dynamic instance
id once use case is executed. This will cause module crash from
subsequent execution of use case as the updated parameters are used.

So instead of over writing the default parameter, make a copy and
update the module parameter and use this in IPC message.
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NKranthikumar, GudishaX <gudishax.kranthikumar@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

If the widget is a mixin module, just unbind between source and sink
and don't stop the source pipe as there can be multiple sinks
connected.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

As a commit 4cd9899f ("ASoC: Intel: Skylake: Add multiple pin
formats") describes, 'fixups is applied to pin 0 only'. On the other
hand, the commit left some codes as what they were. This might
confuses readers.

This commit fixes the issue. This doesn't change driver behaviour at all.

Fixes: 4cd9899f ("ASoC: Intel: Skylake: Add multiple pin formats")
Signed-off-by: NTakashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Tested-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In 'include/linux/kernel.h', there's a helper macro to round numerical
value. Let's use it.
Signed-off-by: NTakashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Tested-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In 'skl_tplg_set_module_init_data()', a pointer to 'params' member of
'struct skl_algo_data' is calculated, then casted to (u32 *) and assigned
to a member of configuration data. The configuration data is passed to the
other functions and used to process intel IPC. In this processing, the
value of member is used to get message data, however this can bring invalid
memory access in 'skl_set_module_params()' as a result of calculation of
a pointer for actual message data.

(sound/soc/intel/skylake/skl-topology.c)
skl_tplg_init_pipe_modules()
->skl_tplg_set_module_init_data() (has this bug)
->skl_tplg_set_module_params()
  (sound/soc/intel/skylake/skl-messages.c)
  ->skl_set_module_params()
    ((char *)param) + data_offset

This commit fixes the bug.

Fixes: abb74003 ("ASoC: Intel: Skylake: Add support to configure module params")
Signed-off-by: NTakashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.5+

Geminilake has two different devices connected to the same SSP, so use
device_type check to get correct device configuration.
Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Instead of passing the topology manifest info directly to IPC library,
define the manifest info in topology and use this in IPC Library.
This will remove the dependency on topology interface definition with
IPC library.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

If system is suspended when PCM was paused/stopped, restart doesn't
configure DMA as it is we are in Pause state and results in IO error
eventually.

Configure host/link DMA before initializing DSP Gateway copier module
instead of DAI prepare(). So moved DMA configuration to mixer PRE_PMD
widget handler instead of DAI prepare.

This uses previously added new API to do the configuration and removes
old DAI prepare code.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

To configure Host/Link DMA, additionally link index and format
are required based on the hw params. So added these parameters in
the pipe params and in hw_params the pipe params are updated.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In skl_tplg_mixer_dapm_post_pmd_event(), a variable 'ret' is initialized but
not used.

We don't check return of skl_delete_pipe, so remove the assignment as
well, so remove this variable.

sound/soc/intel/skylake/skl-topology.c: In function ‘skl_tplg_mixer_dapm_post_pmd_event’:
sound/soc/intel/skylake/skl-topology.c:976:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
  int ret = 0;
      ^
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For device opened/closed, we check the D0i3 capability for the device
and invoke skl_tplg_d0i3_get/put, which counts the use case based on the
mode supported.

These counters are then used to decide if the device can enter D0i3 mode
of streaming or non-streaming or no D0i3.
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Not all use cases can support Doi3. Only certain use cases like hot word
detection, deep buffering can support D0i3 based on resource requirement.

So, pass the D0i3 capability for the FE/BE copier using topology. This will
be used to take a decision for D0i3 mode entry/exit.
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For D0i3, we need to tell DSP to run the pipelines in LP mode. This
information is kept in topology and passed to driver as an attribute
for pipe.

So add a new tuple for lpmode and program the pipe based on value set.
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Trival fix, some dev_* messages are missing a \n, so add it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Post bind parameters of KPB module contains the instance id's of
neighbouring modules in the sink path

Now that module instance ids are generated dynamically we need to update
these parameters as well, so use the table created and update the ids
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Use private id's of module instances that are generated during
init_module for the IPC messages to DSP. These id's are freed
up during delete pipeline.
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

There could be more than one loadable module in a pipeline.
So unload all modules whilst parsing the list.
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>