Don't bother even recording an invalid change attribute if we hold a
delegation since we already know the state of our attribute cache.
We can rely on the fact that we will pick up a copy from the server
when we return the delegation.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Currently, if the NFS_INO_INVALID_ATTR flag is set, for instance by
a call to nfs_post_op_update_inode_locked(), then it will not be cleared
until all the attributes have been revalidated. This means, for instance,
that NFSv4 writes will always force a full attribute revalidation.

Track the ctime, mtime, size and change attribute separately from the
other attributes so that we can have nfs_post_op_update_inode_locked()
set them correctly, and later have the cache consistency bitmask be
able to clear them.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If we managed to revalidate all the attributes, then there is no reason
to mark them as invalid again. We do, however want to ensure that we
set nfsi->attrtimeo correctly.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If we received weak cache consistency data from the server, then those
attributes are up to date, and there is no reason to mark them as
dirty in the attribute cache.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Even if the change attribute is missing, it is still OK to mark the other
attributes as being up to date.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The cache validity attribute is unsigned long, so make sure that
the flags are too.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Starting with NFSv4.1, the server is able to deduce the client id from
the SEQUENCE op which means it can always figure out whether or not
the client is holding a delegation on a file that is being changed.
For that reason, RFC5661 does not require a delegation to be unconditionally
recalled on operations such as SETATTR, RENAME, or REMOVE.

Note that for now, we continue to return READ delegations since that is
still expected by the Linux knfsd server.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Ensure that when we do finally delete the file, then we return the
delegation.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Move the delegation recall out of the generic code, and into the NFSv4
specific callback.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Move the delegation return out of generic code and down into the
NFSv4 specific unlink code.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Move the delegation return out of generic code.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The 'fmode' argument can take an FMODE_EXEC value, which we want to
filter out before comparing to the delegation type.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Michal Kalderon has found some corner cases around device unload
with active NFS mounts that I didn't have the imagination to test
when xprtrdma device removal was added last year.

- The ULP device removal handler is responsible for deallocating
  the PD. That wasn't clear to me initially, and my own testing
  suggested it was not necessary, but that is incorrect.

- The transport destruction path can no longer assume that there
  is a valid ID.

- When destroying a transport, ensure that ib_free_cq() is not
  invoked on a CQ that was already released.
Reported-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd0318 ("xprtrdma: Support unplugging an HCA from ...")
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If we have a RECLAIM_COMPLETE with a populated cl_lock_waitq, then
that implies that a reconnect has occurred. Since we can't expect a
CB_NOTIFY_LOCK callback at that point, just wake up the entire queue
so that all the tasks can re-poll for their locks.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The task is expected to sleep for a while here, and it's possible that
a new EXCHANGE_ID has occurred in the interim, and we were assigned a
new clientid. Since this is a per-client list, there isn't a lot of
value in vetting the clientid on the incoming request.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

We may get a notification and lose the race to another client. Ensure
that we wait again for a notification in that case.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This information can help track down local misconfiguration issues
as well as network partitions and unresponsive servers.

There are several ways to send a ping, and with transport multi-
plexing, the exact rpc_xprt that is used is sometimes not known by
the upper layer. The rpc_xprt pointer passed to the trace point
call also has to be RCU-safe.

I found a spot inside the client FSM where an rpc_xprt pointer is
always available and safe to use.
Suggested-by: NBill Baker <Bill.Baker@oracle.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Introduce a low-overhead mechanism to report information about
latencies of individual RPCs. The goal is to enable user space to
filter the trace record for latency outliers, or build histograms,
etc.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: struct rpc_task carries a pointer to a struct rpc_clnt,
and in fact task->tk_client is always what is passed into trace
points that are already passing @task.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If recording xprt->stat.max_slots is moved into xprt_alloc_slot,
then xprt->num_reqs is never manipulated outside
xprt->reserve_lock. There's no longer a need for xprt->num_reqs to
be atomic.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Some RPC transports have more overhead in their send_request
callouts than others. For example, for RPC-over-RDMA:

- Marshaling an RPC often has to DMA map the RPC arguments

- Registration methods perform memory registration as part of
  marshaling

To capture just server and network latencies more precisely: when
sending a Call, capture the rq_xtime timestamp _after_ the transport
header has been marshaled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Some RPC transports have more overhead in their reply handlers
than others. For example, for RPC-over-RDMA:

- RPC completion has to wait for memory invalidation, which is
  not a part of the server/network round trip

- Recently a context switch was introduced into the reply handler,
  which further artificially inflates the measure of RPC RTT

To capture just server and network latencies more precisely: when
receiving a reply, compute the RTT as soon as the XID is recognized
rather than at RPC completion time.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Since commit 33849792 ("xprtrdma: Detect unreachable NFS/RDMA
servers more reliably"), the xprtrdma transport now has a ->timer
callout. But xprtrdma does not need to compute RTT data, only UDP
needs that. Move the xprt_update_rtt call into the UDP transport
implementation.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Refactor: Both rpcrdma_create_req call sites have to allocate the
buffer where the transport header is built, so just move that
allocation into rpcrdma_create_req.

This buffer is a fixed size. There's no needed information available
in call_allocate that is not also available when the transport is
created.

The original purpose for allocating these buffers on demand was to
reduce the possibility that an allocation failure during transport
creation will hork the mount operation during low memory scenarios.
Some relief for this rare possibility is coming up in the next few
patches.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

With FRWR, the client transport can perform memory registration and
post a Send with just a single ib_post_send.

This reduces contention between the send_request path and the Send
Completion handlers, and reduces the overhead of registering a chunk
that has multiple segments.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

RPC-over-RDMA version 1 credit accounting relies on there being a
response message for every RPC Call. This means that RPC procedures
that have no reply will disrupt credit accounting, just in the same
way as a retransmit would (since it is sent because no reply has
arrived). Deal with the "no reply" case the same way.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Create fewer MRs on average. Many workloads don't need as many as
32 MRs, and the transport can now quickly restock the MR free list.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Currently, when the MR free list is exhausted during marshaling, the
RPC/RDMA transport places the RPC task on the delayq, which forces a
wait for HZ >> 2 before the marshal and send is retried.

With this change, the transport now places such an RPC task on the
pending queue, and wakes it just as soon as more MRs have been
created. Creating more MRs typically takes less than a millisecond,
and this waking mechanism is less deadlock-prone.

Moreover, the waiting RPC task is holding the transport's write
lock, which blocks the transport from sending RPCs. Therefore faster
recovery from MR exhaustion is desirable.

This is the same mechanism that the TCP transport utilizes when
handling write buffer space exhaustion.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: The generic rq_connect_cookie is sufficient to detect RPC
Call retransmission.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: We need to check only that the value does not exceed the
range of the u8 field it's going into.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

With v4.15, on one of my NFS/RDMA clients I measured a nearly
doubling in the latency of small read and write system calls. There
was no change in server round trip time. The extra latency appears
in the whole RPC execution path.

"git bisect" settled on commit ccede759 ("xprtrdma: Spread reply
processing over more CPUs") .

After some experimentation, I found that leaving the WQ bound and
allowing the scheduler to pick the dispatch CPU seems to eliminate
the long latencies, and it does not introduce any new regressions.

The fix is implemented by reverting only the part of
commit ccede759 ("xprtrdma: Spread reply processing over more
CPUs") that dispatches RPC replies specifically on the CPU where the
matching RPC call was made.

Interestingly, saving the CPU number and later queuing reply
processing there was effective _only_ for a NFS READ and WRITE
request. On my NUMA client, in-kernel RPC reply processing for
asynchronous RPCs was dispatched on the same CPU where the RPC call
was made, as expected. However synchronous RPCs seem to get their
reply dispatched on some other CPU than where the call was placed,
every time.

Fixes: ccede759 ("xprtrdma: Spread reply processing over ... ")
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Pull x86 fixes from Thomas Gleixner:
 "A small set of fixes for x86:

   - Add missing instruction suffixes to assembly code so it can be
     compiled by newer GAS versions without warnings.

   - Switch refcount WARN exceptions to UD2 as we did in general

   - Make the reboot on Intel Edison platforms work

   - A small documentation update so text and sample command match"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation, x86, resctrl: Make text and sample command match
  x86/platform/intel-mid: Handle Intel Edison reboot correctly
  x86/asm: Add instruction suffixes to bitops
  x86/entry/64: Add instruction suffix
  x86/refcounts: Switch to UD2 for exceptions

Pull x86/pti fixes from Thomas Gleixner:
 "Three fixes related to melted spectrum:

   - Sync the cpu_entry_area page table to initial_page_table on 32 bit.

     Otherwise suspend/resume fails because resume uses
     initial_page_table and triggers a triple fault when accessing the
     cpu entry area.

   - Zero the SPEC_CTL MRS on XEN before suspend to address a
     shortcoming in the hypervisor.

   - Fix another switch table detection issue in objtool"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
  objtool: Fix another switch table detection issue
  x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes from the timer departement:

   - Add a missing timer wheel clock forward when migrating timers off a
     unplugged CPU to prevent operating on a stale clock base and
     missing timer deadlines.

   - Use the proper shift count to extract data from a register value to
     prevent evaluating unrelated bits

   - Make the error return check in the FSL timer driver work correctly.
     Checking an unsigned variable for less than zero does not really
     work well.

   - Clarify the confusing comments in the ARC timer code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Forward timer base before migrating timers
  clocksource/drivers/arc_timer: Update some comments
  clocksource/drivers/mips-gic-timer: Use correct shift count to extract data
  clocksource/drivers/fsl_ftm_timer: Fix error return checking

Pull irq fixlet from Thomas Gleixner:
 "Just a documentation update for the missing device tree property of
  the R-Car M3N interrupt controller"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support

Pull btrfs fixes from David Sterba:

 - when NR_CPUS is large, a SRCU structure can significantly inflate
   size of the main filesystem structure that would not be possible to
   allocate by kmalloc, so the kvalloc fallback is used

 - improved error handling

 - fix endiannes when printing some filesystem attributes via sysfs,
   this is could happen when a filesystem is moved between different
   endianity hosts

 - send fixes: the NO_HOLE mode should not send a write operation for a
   file hole

 - fix log replay for for special files followed by file hardlinks

 - fix log replay failure after unlink and link combination

 - fix max chunk size calculation for DUP allocation

* tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix log replay failure after unlink and link combination
  Btrfs: fix log replay failure after linking special file and fsync
  Btrfs: send, fix issuing write op when processing hole in no data mode
  btrfs: use proper endianness accessors for super_copy
  btrfs: alloc_chunk: fix DUP stripe size handling
  btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster
  btrfs: handle failure of add_pending_csums
  btrfs: use kvzalloc to allocate btrfs_fs_info

Pull i2c fixes from Wolfram Sang:
 "A driver fix and a documentation fix (which makes dependency handling
  for the next cycle easier)"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: octeon: Prevent error message on bus error
  dt-bindings: at24: sort manufacturers alphabetically