[ Upstream commit 6ae16dfb61bce538d48b7fe98160fada446056c5 ]

In lenovo_probe_tpkbd(), the function of_led_classdev_register() could
return an error value that is unchecked. The fix adds these checks.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9d216211fded20fff301d0317af3238d8383634c ]

First correct the edge case to return the last element if we're
outside the range, rather than at the last element, so that
interpolation is not omitted for points between the two last entries in
the table.

Then correct the formula to perform linear interpolation based the two
points surrounding the read ADC value. The indices for temp are kept as
"hi" and "lo" to pair with the adc indices, but there's no requirement
that the temperature is provided in descendent order. mult_frac() is
used to prevent issues with overflowing the int.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 75cb8d20c112aba70f23d98e3f8d0a38ace16006 ]

The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls
whether a Function can request service using MSI.

i.MX6 Root Ports implement the MSI Capability and may use MSI to request
service for events like PME, hotplug, AER, etc.  In addition, on i.MX6, the
MSI Enable bit controls delivery of MSI interrupts from components below
the Root Port.

Prior to f3fdfc4a ("PCI: Remove host driver Kconfig selection of
CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled
CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI
Enable bit so it could use PME, hotplug, AER, etc.  As a side effect, that
also enabled delivery of MSI interrupts from downstream components.

The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable
in imx6q-pcie so MSI from downstream components works even if nobody uses
MSI for the Root Port events.

Fixes: f3fdfc4a ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS")
Signed-off-by: NRichard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Tested-by: NSven Van Asbroeck <TheSven73@googlemail.com>
Tested-by: NTrent Piepho <tpiepho@impinj.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 162bc7f5afd75b72acbe3c5f3488ef7e64a3fe36 ]

If you have a CPU that fails to round up and then run 'btc' you'll end
up crashing in kdb becaue we dereferenced NULL.  Let's add a check.
It's wise to also set the task to NULL when leaving the debugger so
that if we fail to round up on a later entry into the debugger we
won't backtrace a stale task.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d56c19d07e0bc3ceff366a49b7d7a2440c967b1b ]

By defaul of-based thermal driver do not enable hwmon.
This patch does this explicitly, so that the temperature can be read
through the common hwmon sysfs.
Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
Acked-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]

When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.
Reported-and-tested-by: NStan Johnson <userm57@yahoo.com>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0d9c9a238faf925823bde866182c663b6d734f2e ]

These functions are called from atomic context:

[    9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421
[    9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip
[    9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876f324 #29
[    9.163130] Call Trace:
[    9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable)
[    9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164
[    9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c
[    9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198
[    9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218
[    9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c
[    9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4
[    9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54
[    9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8
[    9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0
[    9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80
[    9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08
[    9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0
[    9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498
[    9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c
[    9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c
[    9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318
[    9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444
[    9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54
[    9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8
[    9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0
[    9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017 ]

In probe_gdrom(), the buffer pointed by 'gd.cd_info' is allocated through
kzalloc() and is used to hold the information of the gdrom device. To
register and unregister the device, the pointer 'gd.cd_info' is passed to
the functions register_cdrom() and unregister_cdrom(), respectively.
However, this buffer is not freed after it is used, which can cause a
memory leak bug.

This patch simply frees the buffer 'gd.cd_info' in exit_gdrom() to fix the
above issue.
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7418e6520f22a2e35815122fa5a53d5bbfa2c10f ]

In drivers/isdn/hisax/hfc_pci.c, the functions hfcpci_interrupt() and
HFCPCI_l1hw() may be concurrently executed.

HFCPCI_l1hw()
  line 1173: if (!cs->tx_skb)

hfcpci_interrupt()
  line 942: spin_lock_irqsave();
  line 1066: dev_kfree_skb_irq(cs->tx_skb);

Thus, a possible concurrency use-after-free bug may occur
in HFCPCI_l1hw().

To fix these bugs, the calls to spin_lock_irqsave() and
spin_unlock_irqrestore() are added in HFCPCI_l1hw(), to protect the
access to cs->tx_skb.
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3c9959e025472122a61faebb208525cf26b305d1 ]

Patch series "zram idle page writeback", v3.

Inherently, swap device has many idle pages which are rare touched since
it was allocated.  It is never problem if we use storage device as swap.
However, it's just waste for zram-swap.

This patchset supports zram idle page writeback feature.

* Admin can define what is idle page "no access since X time ago"
* Admin can define when zram should writeback them
* Admin can define when zram should stop writeback to prevent wearout

Details are in each patch's description.

This patch (of 7):

  ================================
  WARNING: inconsistent lock state
  4.19.0+ #390 Not tainted
  --------------------------------
  inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
  zram_verify/2095 [HC0[0]:SC1[1]:HE1:SE0] takes:
  00000000b1828693 (&(&zram->bitmap_lock)->rlock){+.?.}, at: put_entry_bdev+0x1e/0x50
  {SOFTIRQ-ON-W} state was registered at:
    _raw_spin_lock+0x2c/0x40
    zram_make_request+0x755/0xdc9
    generic_make_request+0x373/0x6a0
    submit_bio+0x6c/0x140
    __swap_writepage+0x3a8/0x480
    shrink_page_list+0x1102/0x1a60
    shrink_inactive_list+0x21b/0x3f0
    shrink_node_memcg.constprop.99+0x4f8/0x7e0
    shrink_node+0x7d/0x2f0
    do_try_to_free_pages+0xe0/0x300
    try_to_free_pages+0x116/0x2b0
    __alloc_pages_slowpath+0x3f4/0xf80
    __alloc_pages_nodemask+0x2a2/0x2f0
    __handle_mm_fault+0x42e/0xb50
    handle_mm_fault+0x55/0xb0
    __do_page_fault+0x235/0x4b0
    page_fault+0x1e/0x30
  irq event stamp: 228412
  hardirqs last  enabled at (228412): [<ffffffff98245846>] __slab_free+0x3e6/0x600
  hardirqs last disabled at (228411): [<ffffffff98245625>] __slab_free+0x1c5/0x600
  softirqs last  enabled at (228396): [<ffffffff98e0031e>] __do_softirq+0x31e/0x427
  softirqs last disabled at (228403): [<ffffffff98072051>] irq_exit+0xd1/0xe0

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(&(&zram->bitmap_lock)->rlock);
    <Interrupt>
      lock(&(&zram->bitmap_lock)->rlock);

   *** DEADLOCK ***

  no locks held by zram_verify/2095.

  stack backtrace:
  CPU: 5 PID: 2095 Comm: zram_verify Not tainted 4.19.0+ #390
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
  Call Trace:
   <IRQ>
   dump_stack+0x67/0x9b
   print_usage_bug+0x1bd/0x1d3
   mark_lock+0x4aa/0x540
   __lock_acquire+0x51d/0x1300
   lock_acquire+0x90/0x180
   _raw_spin_lock+0x2c/0x40
   put_entry_bdev+0x1e/0x50
   zram_free_page+0xf6/0x110
   zram_slot_free_notify+0x42/0xa0
   end_swap_bio_read+0x5b/0x170
   blk_update_request+0x8f/0x340
   scsi_end_request+0x2c/0x1e0
   scsi_io_completion+0x98/0x650
   blk_done_softirq+0x9e/0xd0
   __do_softirq+0xcc/0x427
   irq_exit+0xd1/0xe0
   do_IRQ+0x93/0x120
   common_interrupt+0xf/0xf
   </IRQ>

With writeback feature, zram_slot_free_notify could be called in softirq
context by end_swap_bio_read.  However, bitmap_lock is not aware of that
so lockdep yell out:

  get_entry_bdev
  spin_lock(bitmap->lock);
  irq
  softirq
  end_swap_bio_read
  zram_slot_free_notify
  zram_slot_lock <-- deadlock prone
  zram_free_page
  put_entry_bdev
  spin_lock(bitmap->lock); <-- deadlock prone

With akpm's suggestion (i.e.  bitmap operation is already atomic), we
could remove bitmap lock.  It might fail to find a empty slot if serious
contention happens.  However, it's not severe problem because huge page
writeback has already possiblity to fail if there is severe memory
pressure.  Worst case is just keeping the incompressible in memory, not
storage.

The other problem is zram_slot_lock in zram_slot_slot_free_notify.  To
make it safe is this patch introduces zram_slot_trylock where
zram_slot_free_notify uses it.  Although it's rare to be contented, this
patch adds new debug stat "miss_free" to keep monitoring how often it
happens.

Link: http://lkml.kernel.org/r/20181127055429.251614-2-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: NJoey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3c0c12cc8f00ca5f81acb010023b8eb13e9a7004 ]

When CONFIG_KASAN is enabled on large memory SMP systems, the deferrred
pages initialization can take a long time.  Below were the reported init
times on a 8-socket 96-core 4TB IvyBridge system.

  1) Non-debug kernel without CONFIG_KASAN
     [    8.764222] node 1 initialised, 132086516 pages in 7027ms

  2) Debug kernel with CONFIG_KASAN
     [  146.288115] node 1 initialised, 132075466 pages in 143052ms

So the page init time in a debug kernel was 20X of the non-debug kernel.
The long init time can be problematic as the page initialization is done
with interrupt disabled.  In this particular case, it caused the
appearance of following warning messages as well as NMI backtraces of all
the cores that were doing the initialization.

[   68.240049] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   68.241000] rcu: 	25-...0: (100 ticks this GP) idle=b72/1/0x4000000000000000 softirq=915/915 fqs=16252
[   68.241000] rcu: 	44-...0: (95 ticks this GP) idle=49a/1/0x4000000000000000 softirq=788/788 fqs=16253
[   68.241000] rcu: 	54-...0: (104 ticks this GP) idle=03a/1/0x4000000000000000 softirq=721/825 fqs=16253
[   68.241000] rcu: 	60-...0: (103 ticks this GP) idle=cbe/1/0x4000000000000000 softirq=637/740 fqs=16253
[   68.241000] rcu: 	72-...0: (105 ticks this GP) idle=786/1/0x4000000000000000 softirq=536/641 fqs=16253
[   68.241000] rcu: 	84-...0: (99 ticks this GP) idle=292/1/0x4000000000000000 softirq=537/537 fqs=16253
[   68.241000] rcu: 	111-...0: (104 ticks this GP) idle=bde/1/0x4000000000000000 softirq=474/476 fqs=16253
[   68.241000] rcu: 	(detected by 13, t=65018 jiffies, g=249, q=2)

The long init time was mainly caused by the call to kasan_free_pages() to
poison the newly initialized pages.  On a 4TB system, we are talking about
almost 500GB of memory probably on the same node.

In reality, we may not need to poison the newly initialized pages before
they are ever allocated.  So KASAN poisoning of freed pages before the
completion of deferred memory initialization is now disabled.  Those pages
will be properly poisoned when they are allocated or freed after deferred
pages initialization is done.

With this change, the new page initialization time became:

[   21.948010] node 1 initialised, 132075466 pages in 18702ms

This was still about double the non-debug kernel time, but was much
better than before.

Link: http://lkml.kernel.org/r/1544459388-8736-1-git-send-email-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9e6aea22802b5684c7e1d69822aeb0844dd01953 ]

Included file path was hard-wired in the ocfs2 makefile, which might
causes some confusion when compiling ocfs2 as an external module.

Say if we compile ocfs2 module as following.
cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2
cd /other/dir/ocfs2
make -C /path/to/kernel_source M=`pwd` modules

Acutally, the compiler wil try to find included file in
/kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2.

To fix this little bug, we introduce the var $(src) provided by kbuild.
$(src) means the absolute path of the running kbuild file.

Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.comSigned-off-by: NLarry Chen <lchen@suse.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 70306d9dce75abde855cefaf32b3f71eed8602a3 ]

For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag
and submit the io, second wait io done, last check whether bh uptodate, if
not return io error.

If two sync io for the same bh were issued, it could be the first io done
and set uptodate flag, but just before check that flag, the second io came
in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io
will return IO error.

Indeed it's not necessary to clear uptodate flag, as the io end handler
end_buffer_read_sync() will set or clear it based on io succeed or failed.

The following message was found from a nfs server but the underlying
storage returned no error.

[4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5
[4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5
[4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5
[4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5
[4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5

Same issue in non sync read ocfs2_read_blocks(), fixed it as well.

Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NChangwei Ge <ge.changwei@h3c.com>
Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 440e7b379f91acd245d5c8de94d533f40f5dffb3 ]

arch/sh/boards/mach-kfr2r09/setup.c does not need to #include
<mtd/onenand.h>, and doing so causes a build warning, so drop that header
file.

In file included from ../arch/sh/boards/mach-kfr2r09/setup.c:28:
../include/linux/mtd/onenand.h:225:12: warning: 'struct mtd_oob_ops' declared inside parameter list will not be visible outside of this definition or declaration
     struct mtd_oob_ops *ops);

Link: http://lkml.kernel.org/r/702f0a25-c63e-6912-4640-6ab0f00afbc7@infradead.org
Fixes: f3590dc3 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 67a28de47faa83585dd644bd4c31e5a1d9346c50 ]

Running something like:

	decodecode vmlinux .

leads to interested results where not only the leading "." gets stripped
from the displayed paths, but also anywhere in the string, displaying
something like:

	kvm_vcpu_check_block (arch/arm64/kvm/virt/kvm/kvm_mainc:2141)

which doesn't help further processing.

Fix it by only stripping the base path if it is a prefix of the path.

Link: http://lkml.kernel.org/r/20181210174659.31054-3-marc.zyngier@arm.comSigned-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a389aece97938966616ce0336466b98b0351ef10 ]

Ondřej reported that when compiled with python3, the python extension
regresses in evlist.get_pollfd function behaviour.

The evlist.get_pollfd function creates file objects from evlist's fds
and returns them in a list. The python3 version also sets them to 'close
the original descriptor' when the object dies (is closed), by passing
True via the 'closefd' arg in the PyFile_FromFd call.

The python's closefd doc says:

  If closefd is False, the underlying file descriptor will be kept open
  when the file is closed.

That's why the following line in python3 closes all evlist fds:

  evlist.get_pollfd()

the returned list is immediately destroyed and that takes down the
original events fds.

Passing closefd as False to PyFile_FromFd to fix this.
Reported-by: NOndřej Lysoněk <olysonek@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 66dfdff0 ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20181226112121.5285-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e250d91d65750a0c0c62483ac4f9f357e7317617 ]

This fixes the case where all mount options specified are consumed by an
LSM and all that's left is an empty string. In this case cgroupfs should
accept the string and not fail.

How to reproduce (with SELinux enabled):

    # umount /sys/fs/cgroup/unified
    # mount -o context=system_u:object_r:cgroup_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified
    mount: /sys/fs/cgroup/unified: wrong fs type, bad option, bad superblock on cgroup2, missing codepage or helper program, or other error.
    # dmesg | tail -n 1
    [   31.575952] cgroup: cgroup2: unknown option ""

Fixes: 67e9c74b ("cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type")
[NOTE: should apply on top of commit 5136f636 ("cgroup: implement "nsdelegate" mount option"), older versions need manual rebase]
Suggested-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NOndrej Mosnacek <omosnace@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e4589fa545e0020dbbc3c9bde35f35f949901392 ]

When there is a failure in f2fs_fill_super() after/during
the recovery of fsync'd nodes, it frees the current sbi and
retries again. This time the mount is successful, but the files
that got recovered before retry, still holds the extent tree,
whose extent nodes list is corrupted since sbi and sbi->extent_list
is freed up. The list_del corruption issue is observed when the
file system is getting unmounted and when those recoverd files extent
node is being freed up in the below context.

list_del corruption. prev->next should be fffffff1e1ef5480, but was (null)
<...>
kernel BUG at kernel/msm-4.14/lib/list_debug.c:53!
lr : __list_del_entry_valid+0x94/0xb4
pc : __list_del_entry_valid+0x94/0xb4
<...>
Call trace:
__list_del_entry_valid+0x94/0xb4
__release_extent_node+0xb0/0x114
__free_extent_tree+0x58/0x7c
f2fs_shrink_extent_tree+0xdc/0x3b0
f2fs_leave_shrinker+0x28/0x7c
f2fs_put_super+0xfc/0x1e0
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78
__cleanup_mnt+0x1c/0x28
task_work_run+0x48/0xd0
do_notify_resume+0x678/0xe98
work_pending+0x8/0x14

Fix this by not creating extents for those recovered files if shrinker is
not registered yet. Once mount is successful and shrinker is registered,
those files can have extents again.
Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 26fd962bde0b15e54234fe762d86bc0349df1de4 ]

niu_pci_eeprom_read() may fail, so we should check its return value
before using the read data.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Acked-by: NShannon Nelson <shannon.lee.nelson@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8892d8545f2d0342b9c550defbfb165db237044b ]

Changing protection is a very high cost operation in UML
because in addition to an extra syscall it also interrupts
mmap merge sequences generated by the tlb.

While the condition is not particularly common it is worth
avoiding.
Signed-off-by: NAnton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 60aa4d5536ab7fe32433ca1173bd9d6633851f27 ]

iput() on sbi->node_inode can update sbi->stat_info
in the below context, if the f2fs_write_checkpoint()
has failed with error.

f2fs_balance_fs_bg+0x1ac/0x1ec
f2fs_write_node_pages+0x4c/0x260
do_writepages+0x80/0xbc
__writeback_single_inode+0xdc/0x4ac
writeback_single_inode+0x9c/0x144
write_inode_now+0xc4/0xec
iput+0x194/0x22c
f2fs_put_super+0x11c/0x1e8
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78

Fix this by moving f2fs_destroy_stats() further below iput() in
both f2fs_put_super() and f2fs_fill_super() paths.
Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 59a63e479ce36a3f24444c3a36efe82b78e4a8e0 ]

RHBZ: 1021460

There is an issue where when multiple threads open/close the same directory
ntwrk_buf_start might end up being NULL, causing the call to smbCalcSize
later to oops with a NULL deref.

The real bug is why this happens and why this can become NULL for an
open cfile, which should not be allowed.
This patch tries to avoid a oops until the time when we fix the underlying
issue.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0b15394475e3bcaf35ca4bf22fc55d56df67224e ]

Testing has shown, that when using mainline U-Boot on MT7688 based
boards, the system may hang or crash while mounting the root-fs. The
main issue here is that mainline U-Boot configures EBase to a value
near the end of system memory. And with CONFIG_CPU_MIPSR2_IRQ_VI
disabled, trap_init() will not allocate a new area to place the
exception handler. The original value will be used and the handler
will be copied to this location, which might already be used by some
userspace application.

The MT7688 supports VI - its config3 register is 0x00002420, so VInt
(Bit 5) is set. But without setting CONFIG_CPU_MIPSR2_IRQ_VI this
bit will not be evaluated to result in "cpu_has_vi" being set. This
patch now selects CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8 which results
trap_init() to allocate some memory for the exception handler.

Please note that this issue was not seen with the Mediatek U-Boot
version, as it does not touch EBase (stays at default of 0x8000.0000).
This is strictly also not correct as the kernel (_text) resides
here.
Signed-off-by: NStefan Roese <sr@denx.de>
[paul.burton@mips.com: s/beeing/being/]
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5ac93f808338f4dd465402e91869702eb87db241 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/crypto/ux500/hash/hash_core.c:169:4: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                        direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
                        ^~~~~~~~~
1 warning generated.

dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
We know that the only direction supported by this function is
DMA_TO_DEVICE because of the check at the top of this function so we can
just use the equivalent value from dma_transfer_direction.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9d880c5945c748d8edcac30965f3349a602158c4 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/crypto/ux500/cryp/cryp_core.c:559:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                                direction, DMA_CTRL_ACK);
                                ^~~~~~~~~
drivers/crypto/ux500/cryp/cryp_core.c:583:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                                direction,
                                ^~~~~~~~~
2 warnings generated.

dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
Because we know the value of the dma_data_direction enum from the
switch statement, we can just use the proper value from
dma_transfer_direction so there is no more conversion.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0464ed24380905d640030d368cd84a4e4d1e15e2 ]

Currently seq_buf_puts() will happily create a non null-terminated
string for you in the buffer. This is particularly dangerous if the
buffer is on the stack.

For example:

  char buf[8];
  char secret = "secret";
  struct seq_buf s;

  seq_buf_init(&s, buf, sizeof(buf));
  seq_buf_puts(&s, "foo");
  printk("Message is %s\n", buf);

Can result in:

  Message is fooªªªªªsecret

We could require all users to memset() their buffer to zero before
use. But that seems likely to be forgotten and lead to bugs.

Instead we can change seq_buf_puts() to always leave the buffer in a
null-terminated state.

The only downside is that this makes the buffer 1 character smaller
for seq_buf_puts(), but that seems like a good trade off.

Link: http://lkml.kernel.org/r/20181019042109.8064-1-mpe@ellerman.id.auAcked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315 ]

In lm80_probe(), if lm80_read_value() fails, it returns a negative
error number which is stored to data->fan[f_min] and will be further
used. We should avoid using the data if the read fails.

The fix checks if lm80_read_value() fails, and if so, returns with the
error number.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c9c63915519b1def7043b184680f33c24cd49d7b ]

If lm80_read_value() fails, it returns a negative number instead of the
correct read data. Therefore, we should avoid using the data if it
fails.

The fix checks if lm80_read_value() fails, and if so, returns with the
error number.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
[groeck: One variable for return values is enough]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 14541b1e7e723859ff2c75c6fc10cdbbec6b8c34 ]

Current libbfd feature test unconditionally links against -liberty and -lz.
While it's required on some systems (e.g. opensuse), it's completely
unnecessary on the others, where only -lbdf is sufficient (debian).
This patch streamlines (and renames) the following feature checks:

feature-libbfd           - only link against -lbfd (debian),
                           see commit 2cf90407 ("perf tools: Fix bfd
			   dependency libraries detection")
feature-libbfd-liberty   - link against -lbfd and -liberty
feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse),
                           see commit 280e7c48 ("perf tools: fix BFD
			   detection on opensuse")

(feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z}
for clarity)

The main motivation is to fix this feature test for bpftool which is
currently broken on debian (libbfd feature shows OFF, but we still
unconditionally link against -lbfd and it works).

Tested on debian with only -lbfd installed (without -liberty); I'd
appreciate if somebody on the other systems can test this new detection
method.
Signed-off-by: NStanislav Fomichev <sdf@google.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 594d1644cd59447f4fceb592448d5cd09eb09b5e ]

This patch removes the check from nfs_compare_mount_options to see if a
`sec' option was passed for the current mount before comparing auth
flavors and instead just always compares auth flavors.

Consider the following scenario:

You have a server with the address 192.168.1.1 and two exports /export/a
and /export/b.  The first export supports `sys' and `krb5' security, the
second just `sys'.

Assume you start with no mounts from the server.

The following results in EIOs being returned as the kernel nfs client
incorrectly thinks it can share the underlying `struct nfs_server's:

$ mkdir /tmp/{a,b}
$ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a
$ sudo mount -t nfs -o vers=3          192.168.1.1:/export/b /tmp/b
$ df >/dev/null
df: ‘/tmp/b’: Input/output error
Signed-off-by: NChris Perl <cperl@janestreet.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7a86dab8cf2f0fdf508f3555dddfc236623bff60 ]

Since the offset is added directly to the hva from the
gfn_to_hva_cache, a negative offset could result in an out of bounds
write. The existing BUG_ON only checks for addresses beyond the end of
the gfn_to_hva_cache, not for addresses before the start of the
gfn_to_hva_cache.

Note that all current call sites have non-negative offsets.

Fixes: 4ec6e863 ("kvm: Introduce kvm_write_guest_offset_cached()")
Reported-by: NCfir Cohen <cfir@google.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NCfir Cohen <cfir@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Reviewed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0db6896ff6332ba694f1e61b93ae3b2640317633 ]

For fadump to work successfully there should not be any holes in reserved
memory ranges where kernel has asked firmware to move the content of old
kernel memory in event of crash. Now that fadump uses CMA for reserved
area, this memory area is now not protected from hot-remove operations
unless it is cma allocated. Hence, fadump service can fail to re-register
after the hot-remove operation, if hot-removed memory belongs to fadump
reserved region. To avoid this make sure that memory from fadump reserved
area is not hot-removable if fadump is registered.

However, if user still wants to remove that memory, he can do so by
manually stopping fadump service before hot-remove operation.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e87555e550cef4941579cd879759a7c0dee24e68 ]

AMD doesn't seem to implement MSR_IA32_MCG_EXT_CTL and svm code in kvm
knows nothing about it, however, this MSR is among emulated_msrs and
thus returned with KVM_GET_MSR_INDEX_LIST. The consequent KVM_GET_MSRS,
of course, fails.

Report the MSR as unsupported to not confuse userspace.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2b745ac3cceb8fc1d9985990c8241a821ea97e53 ]

The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
only belong to the pin controller in the AO domain. With the current
definition these pins cannot be referred to in .dts files as group
(which is possible on GXBB and GXL for example).

Add a separate "gpio_aobus" function to fix the mapping between the pin
controller and the GPIO pins in the AO domain. This is similar to how
the GXBB and GXL drivers implement this functionality.

Fixes: 9dab1868 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 42f9b48cc5402be11d2364275eb18c257d2a79e8 ]

The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
only belong to the pin controller in the AO domain. With the current
definition these pins cannot be referred to in .dts files as group
(which is possible on GXBB and GXL for example).

Add a separate "gpio_aobus" function to fix the mapping between the pin
controller and the GPIO pins in the AO domain. This is similar to how
the GXBB and GXL drivers implement this functionality.

Fixes: 9dab1868 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ffca395b11c4a5a6df6d6345f794b0e3d578e2d0 ]

On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
a no-exec fault generates DSISR_PROTFAULT error bits,
not DSISR_NOEXEC_OR_G.

This patch adds DSISR_PROTFAULT in the test mask.

Fixes: d3ca5874 ("powerpc/mm: Fix reporting of kernel execute faults")
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2122b40580dd9d0620398739c773d07a7b7939d0 ]

When unregistering fbdev using unregister_framebuffer(), any bound
console will unbind automatically. This is working fine if this is the
only framebuffer, resulting in a switch to the dummy console. However if
there is a fb0 and I unregister fb1 having a bound console, I eventually
get a crash. The fastest way for me to trigger the crash is to do a
reboot, resulting in this splat:

[   76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c
[   76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm]
[   76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4
[   76.478933] Hardware name: BCM2835
[   76.478949] Backtrace:
[   76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24)
[   76.479022]  r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81
[   76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28)
[   76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c)
[   76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58)
[   76.479165]  r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84
[   76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c)
[   76.479222]  r6:d7666a00 r5:c0e918ee r4:dbc4e700
[   76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88)
[   76.479281]  r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00
[   76.479298]  r4:20000113
[   76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54)
[   76.479374]  r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc
[   76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230)
[   76.479435]  r4:c0e9192f r3:d758a340
[   76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c)
[   76.479495]  r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8
[   76.479513]  r4:d8a8fabc
[   76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184)
[   76.479570]  r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280
[   76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc)
[   76.479632]  r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002
[   76.479650]  r4:c0eb65ec
[   76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168)
[   76.479716]  r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0
[   76.479734]  r4:00000000
[   76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0)
[   76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48)
[   76.479823]  r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8
[   76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98)

The problem is in the console rebinding in fbcon_fb_unbind(). It uses the
virtual console index as the new framebuffer index to bind the console(s)
to. The correct way is to use the con2fb_map lookup table to find the
framebuffer index.

Fixes: cfafca80 ("fbdev: fbcon: console unregistration from unregister_framebuffer")
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NMikulas Patocka <mpatocka@redhat.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 98cff8b23ed1c763a029ee81ea300df0d153d07d ]

In __ghes_panic() clear the block status in the APEI generic
error status block for that generic hardware error source before
calling panic() to prevent a second panic() in the crash kernel
for exactly the same fatal error.

Otherwise ghes_probe(), running in the crash kernel, would see
an unhandled error in the APEI generic error status block and
panic again, thereby precluding any crash dump.
Signed-off-by: NLenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: NDavid Arcari <darcari@redhat.com>
Tested-by: NTyler Baicar <baicar.tyler@gmail.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ]

I210 ethernet card doesn't wakeup when a cable gets plugged. It's
because its PME is not set.

Since commit 42eca230 ("PCI: Don't touch card regs after runtime
suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops
calling pci_finish_runtime_suspend(), which enables the PCI PME.

To fix the issue, let's not to save PCI states when it's runtime
suspend, to let the PCI subsystem enables PME.

Fixes: 42eca230 ("PCI: Don't touch card regs after runtime suspend D3")
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eec903769b4ea476591ffff73bb7359f14f38c51 ]

If ice driver has q_vectors w/ active NAPI that has no rings,
then this will result in a divide by zero error. To correct it
I am updating the driver code so that we only support NAPI on
q_vectors that have 1 or more rings allocated to them.

See commit 13a8cd19 ("i40e: Do not enable NAPI on q_vectors
that have no rings") for detail.
Signed-off-by: NYoung Xiao <YangX92@hotmail.com>
Acked-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>