Now that we can directly get the ACPI device conterpart of the physical
ATA transport device, the odd_can_poweroff can be eliminated.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

If ACPI handle for an ATA device is NULL, we shouldn't call
ata_dev_get_GTF as that function will use handle to do some ACPI
evaluation.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

ZPODD is built on top of runtime PM functionality, it doesn't make sense
to have it in a kernel that doesn't have CONFIG_PM_RUNTIME set.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The SC1200 is a SoC based on the Geode GX1 32-bit x86 processor, so
its drivers are only needed on this architecture, except for build
testing purpose.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NTejun Heo <tj@kernel.org>

This is where we disable IRQs on suspend and update the internal
power state during suspend/resume.
Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

This device is designed specifically to run on ST-Microelectronics'
hardware. To ensure no attempts are made to run on anything incompatible
we add a dependency on ST architecture
Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

ata_platform_remove_one() allows us to specify our own exit function
via platform data then goes off and removes ATA Host and Port in
preparation for device removal.
Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

Other devices have adopted similar naming conventions which have been
accepted as the standard. This patch brings any mention of the the ST
AHCI driver into line with them.
Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

Acked-by: NAlexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

The current flow of control prevents this function from being
called. Let's remove the call.
Signed-off-by: NSilvan Jegen <s.jegen@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

As far as I know, the CS5520 and CS5530 chipsets were only used with
32-bit x86 Geode processors, so I think their drivers are only needed
on this architecture, except for build testing purpose.

While we're here, simplify the dependencies for the CS5535 driver.

The CS5536 was used with the Geode processors, but also on MIPS
Loongson/Lemote 2 systems, so let its driver be built for these two
architectures only, except for build testing purpose.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>

Prompted by the social effort in the US to discourage usage of the
adjective "retarded".

In this case we needlessly anthropomorphize hard drives.  The
implication is that due to design deficiencies in the device reset
recovery time is negatively impacted.  We can simply clearly state that
fact.  "Exceptional devices cause outliers in reset recovery time." This
steers clear of any unintended comparison of such devices to humans with
cognitive disabilities.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

This fixes the following warnings when CONFIG_PM_SLEEP is not set:

drivers/ata/ahci_imx.c:284:12: warning: ‘imx_ahci_suspend’ defined but not used [-Wunused-function]
drivers/ata/ahci_imx.c:299:12: warning: ‘imx_ahci_resume’ defined but not used [-Wunused-function]
Reported-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

ahci_sunxi_phy_init is called from the probe and resume code paths, and
sleeping is safe in both, so use msleep instead of mdelay.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

These members are not used anywhere, and in the future we want
ahci_platform_data to go away entirely so there is no reason to keep these
around.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Since the 3.13 release the ahci_imx driver has proper devicetree enabled
support for ahci on imx53 and that is used instead of the old board file
created imx53-ahci platform device.

Note this patch also complete drops the id-table, an id-table is not needed
for a single id platform driver, the name field in the driver struct suffices.

And the code already has an explicit "MODULE_ALIAS("platform:ahci");" so the
id-table is not needed for that either.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

I've done a grep over the entire kernel tree and nothing is using this
(anymore?).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

On OMAP platforms the device needs to be runtime resumed before it can
be accessed. The OMAP HWMOD framework takes care of enabling the
module and its resources based on the device's runtime PM state.

In this patch we runtime resume during .probe() and runtime suspend
after .remove().

We also update the runtime PM state during .resume().

CC: Balaji T K <balajitk@ti.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Some platforms have a PHY hooked up to the SATA controller. The PHY
needs to be initialized and powered up for SATA to work. We do that
using the PHY framework.

tj: Minor comment formatting updates.

CC: Balaji T K <balajitk@ti.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo<tj@kernel.org>

The ahci_platform driver supports "snps,dwc-ahci".
Add this to the DT binding information.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Add compatible string "snps,dwc-ahci", which should be used
for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

This avoids the ugliness of creating a nested platform device from probe.

While moving it around anyways, move the mk6q phy init code from probe
to imx_sata_enable, as the phy needs to be re-initialized on resume too,
otherwise the drive won't be recognized after resume.

Tested on a wandboard i.mx6 quad.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

This patch adds support for the ahci sata controler found on Allwinner A10
and A20 SoCs to the ahci_platform driver.

Orignally written by Olliver Schinagl using the approach of having a platform
device which probe method creates a new child platform device which gets
driven by ahci_platform.c, as done by ahci_imx.c .

Refactored by Hans de Goede to add most of the non sunxi specific functionality
to ahci_platform.c and use a platform_data pointer from of_device_id for the
sunxi specific bits.
Signed-off-by: NOlliver Schinagl <oliver@schinagl.nl>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Split suspend / resume code into host suspend / resume functionality and
resource enable / disabling phases, and export the new suspend_ / resume_host
functions.

tj: Minor comment formatting updates.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

ahci_probe consists of 3 steps:
1) Get resources (get mmio, clks, regulator)
2) Enable resources, handled by ahci_platform_enable_resouces
3) The more or less standard ahci-host controller init sequence

This commit refactors step 1 and 3 into separate functions, so the platform
drivers for AHCI implementations which need a specific order in step 2,
and / or need to do some custom register poking at some time, can re-use
ahci-platform.c code without needing to copy and paste it.

Note that ahci_platform_init_host's prototype takes the 3 non function
members of ahci_platform_data as arguments, the idea is that drivers using
the new exported utility functions will not use ahci_platform_data at all,
and hopefully in the future ahci_platform_data can go away entirely.

tj: Minor comment formatting updates.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

tj: Minor comment formatting updates.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The allwinner-sun4i AHCI controller needs 2 clocks to be enabled and the
imx AHCI controller needs 3 clocks to be enabled.

tj: Minor comment formatting updates.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a
special register to be poked before starting the DMA engine.

This register gets reset on an ahci_stop_engine call, so there is no other
place then ahci_start_engine where this poking can be done.

This commit allows drivers to override ahci_start_engine behavior for use by
the Allwinner AHCI driver (and potentially other drivers in the future).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

sparse says:

drivers/ata/libahci.c:1390:5: warning:
 symbol 'ahci_pmp_retry_softreset' was not declared. Should it be static?
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Let users know that CONFIG_ATA is the kconfig symbol for libata,
since libata is mentioned in documentation and messages several
times.

Also correct a grammar typo.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

No need to return a 'fake' return value on platform_get_irq() failure.

Just return the error code itself instead.

Also, change the error condition to irq < 0, so that only negative values
are treated as errors.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Using devm_ioremap_resource() can lead to code simplication, as we don't need
to explicitily check for error returned by platform_get_resource().

Also, no need to print an error message when devm_ioremap_resource() fails,
as the OOM code code will shout loudly on such condition.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Cc: linux-ide@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Pull parisc updates from Helge Deller:
 "The three major changes in this patchset is a implementation for
  flexible userspace memory maps, cache-flushing fixes (again), and a
  long-discussed ABI change to make EWOULDBLOCK the same value as
  EAGAIN.

  parisc has been the only platform where we had EWOULDBLOCK != EAGAIN
  to keep HP-UX compatibility.  Since we will probably never implement
  full HP-UX support, we prefer to drop this compatibility to make it
  easier for us with Linux userspace programs which mostly never checked
  for both values.  We don't expect major fall-outs because of this
  change, and if we face some, we will simply rebuild the necessary
  applications in the debian archives"

* 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: add flexible mmap memory layout support
  parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
  parisc: convert uapi/asm/stat.h to use native types only
  parisc: wire up sched_setattr and sched_getattr
  parisc: fix cache-flushing
  parisc/sti_console: prefer Linux fonts over built-in ROM fonts

HPFS needs to load 4 consecutive 512-byte sectors when accessing the
directory nodes or bitmaps.  We can't switch to 2048-byte block size
because files are allocated in the units of 512-byte sectors.

Previously, the driver would allocate a 2048-byte area using kmalloc,
copy the data from four buffers to this area and eventually copy them
back if they were modified.

In the current implementation of the buffer cache, buffers are allocated
in the pagecache.  That means that 4 consecutive 512-byte buffers are
stored in consecutive areas in the kernel address space.  So, we don't
need to allocate extra memory and copy the content of the buffers there.

This patch optimizes the code to avoid copying the buffers.  It checks
if the four buffers are stored in contiguous memory - if they are not,
it falls back to allocating a 2048-byte area and copying data there.
Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, hpfs scanned all bitmaps each time the user asked for free
space using statfs.  This patch changes it so that hpfs scans the
bitmaps only once, remembes the free space and on next invocation of
statfs it returns the value instantly.

New versions of wine are hammering on the statfs syscall very heavily,
making some games unplayable when they're stored on hpfs, with load
times in minutes.

This should be backported to the stable kernels because it fixes
user-visible problem (excessive level load times in wine).
Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>