Inorder to support recording of tgid, the following changes are made:

* Introduce a new API (tracing_record_taskinfo) to additionally record the tgid
  along with the task's comm at the same time. This has has the benefit of not
  setting trace_cmdline_save before all the information for a task is saved.
* Add a new API tracing_record_taskinfo_sched_switch to record task information
  for 2 tasks at a time (previous and next) and use it from sched_switch probe.
* Preserve the old API (tracing_record_cmdline) and create it as a wrapper
  around the new one so that existing callers aren't affected.
* Reuse the existing sched_switch and sched_wakeup probes to record tgid
  information and add a new option 'record-tgid' to enable recording of tgid

When record-tgid option isn't enabled to being with, we take care to make sure
that there's isn't memory or runtime overhead.

Link: http://lkml.kernel.org/r/20170627020155.5139-1-joelaf@google.com

Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: NMichael Sartain <mikesart@gmail.com>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

When a module filter is added to set_ftrace_filter, if the module is not
loaded, it is cached. This should be considered an active filter, and
function tracing should be filtered by this. That is, if a cached module
filter is the only filter set, then no function tracing should be happening,
as all the functions available will be filtered out.

This makes sense, as the reason to add a cached module filter, is to trace
the module when you load it. There shouldn't be any other tracing happening
until then.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

This is the start of the infrastructure work to allow for tracing module
functions before it is loaded.

Currently the following command:

  # echo :mod:some-mod > set_ftrace_filter

will enable tracing of all functions within the module "some-mod" if it is
loaded. What we want, is if the module is not loaded, that line will be
saved. When the module is loaded, then the "some-mod" will have that line
executed on it, so that the functions within it starts being traced.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Rename the core trace enum routines to use eval, to
reflect their use by more than just enum to value mapping.

Link: http://lkml.kernel.org/r/20170531215653.3240-8-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Each enum is loaded into the trace_enum_map, as we
are now using this for more than enums rename it.

Link: http://lkml.kernel.org/r/20170531215653.3240-3-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

No need to add ugly #ifdefs in the code. Having a standard stub file is much
prettier.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

If instance directories are deleted while there are registered function
triggers:

  # cd /sys/kernel/debug/tracing/instances
  # mkdir test
  # echo "schedule:enable_event:sched:sched_switch" > test/set_ftrace_filter
  # rmdir test
  Unable to handle kernel paging request for data at address 0x00000008
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048
  NUMA
  pSeries
  Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc kvm iptable_filter fuse binfmt_misc pseries_rng rng_core vmx_crypto ib_iser rdma_cm iw_cm ib_cm ib_core libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath virtio_net virtio_blk virtio_pci crc32c_vpmsum virtio_ring virtio
  CPU: 8 PID: 8694 Comm: rmdir Not tainted 4.11.0-nnr+ #113
  task: c0000000bab52800 task.stack: c0000000baba0000
  NIP: c0000000021edde8 LR: c0000000021f0590 CTR: c000000002119620
  REGS: c0000000baba3870 TRAP: 0300   Not tainted  (4.11.0-nnr+)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>
    CR: 22002422  XER: 20000000
  CFAR: 00007fffabb725a8 DAR: 0000000000000008 DSISR: 40000000 SOFTE: 0
  GPR00: c00000000220f750 c0000000baba3af0 c000000003157e00 0000000000000000
  GPR04: 0000000000000040 00000000000000eb 0000000000000040 0000000000000000
  GPR08: 0000000000000000 0000000000000113 0000000000000000 c00000000305db98
  GPR12: c000000002119620 c00000000fd42c00 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 c0000000bab52e90 0000000000000000
  GPR24: 0000000000000000 00000000000000eb 0000000000000040 c0000000baba3bb0
  GPR28: c00000009cb06eb0 c0000000bab52800 c00000009cb06eb0 c0000000baba3bb0
  NIP [c0000000021edde8] ring_buffer_lock_reserve+0x8/0x4e0
  LR [c0000000021f0590] trace_event_buffer_lock_reserve+0xe0/0x1a0
  Call Trace:
  [c0000000baba3af0] [c0000000021f96c8] trace_event_buffer_commit+0x1b8/0x280 (unreliable)
  [c0000000baba3b60] [c00000000220f750] trace_event_buffer_reserve+0x80/0xd0
  [c0000000baba3b90] [c0000000021196b8] trace_event_raw_event_sched_switch+0x98/0x180
  [c0000000baba3c10] [c0000000029d9980] __schedule+0x6e0/0xab0
  [c0000000baba3ce0] [c000000002122230] do_task_dead+0x70/0xc0
  [c0000000baba3d10] [c0000000020ea9c8] do_exit+0x828/0xd00
  [c0000000baba3dd0] [c0000000020eaf70] do_group_exit+0x60/0x100
  [c0000000baba3e10] [c0000000020eb034] SyS_exit_group+0x24/0x30
  [c0000000baba3e30] [c00000000200bcec] system_call+0x38/0x54
  Instruction dump:
  60000000 60420000 7d244b78 7f63db78 4bffaa09 393efff8 793e0020 39200000
  4bfffecc 60420000 3c4c00f7 3842a020 <81230008> 2f890000 409e02f0 a14d0008
  ---[ end trace b917b8985d0e650b ]---
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Faulting instruction address: 0xc0000000021edde8

To address this, let's clear all registered function probes before
deleting the ftrace instance.

Link: http://lkml.kernel.org/r/c5f1ca624043690bd94642bb6bffd3f2fc504035.1494956770.git.naveen.n.rao@linux.vnet.ibm.comReported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Have the traceon/off function probe triggers affect only the instance they
are set in. This required making the trace_on/off accessible for other files
in the tracing directory.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

With the redesign of the registration and execution of the function probes
(triggers), data can now be passed from the setup of the probe to the probe
callers that are specific to the trace_array it is on. Although, all probes
still only affect the toplevel trace array, this change will allow for
instances to have their own probes separated from other instances and the
top array.

That is, something like the stacktrace probe can be set to trace only in an
instance and not the toplevel trace array. This isn't implement yet, but
this change sets the ground work for the change.

When a probe callback is triggered (someone writes the probe format into
set_ftrace_filter), it calls register_ftrace_function_probe() passing in
init_data that will be used to initialize the probe. Then for every matching
function, register_ftrace_function_probe() will call the probe_ops->init()
function with the init data that was passed to it, as well as an address to
a place holder that is associated with the probe and the instance. The first
occurrence will have a NULL in the pointer. The init() function will then
initialize it. If other probes are added, or more functions are part of the
probe, the place holder will be passed to the init() function with the place
holder data that it was initialized to the last time.

Then this place_holder is passed to each of the other probe_ops functions,
where it can be used in the function callback. When the probe_ops free()
function is called, it can be called either with the rip of the function
that is being removed from the probe, or zero, indicating that there are no
more functions attached to the probe, and the place holder is about to be
freed. This gives the probe_ops a way to free the data it assigned to the
place holder if it was allocade during the first init call.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In order to eventually have each trace_array instance have its own unique
set of function probes (triggers), the trace array needs to hold the ops and
the filters for the probes.

This is the first step to accomplish this. Instead of having the private
data of the probe ops point to the trace_array, create a separate list that
the trace_array holds. There's only one private_data for a probe, we need
one per trace_array. The probe ftrace_ops will be dynamically created for
each instance, instead of being static.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Pass the trace_array associated to a ftrace_probe_ops into the probe_ops
func(), init() and free() functions. The trace_array is the descriptor that
describes a tracing instance. This will help create the infrastructure that
will allow having function probes unique to tracing instances.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Add a link list to the trace_array to hold func probes that are registered.
Currently, all function probes are the same for all instances as it was
before, that is, only the top level trace_array holds the function probes.
But this lays the ground work to have function probes be attached to
individual instances, and having the event trigger only affect events in the
given instance. But that work is still to be done.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Now that the function probes have their own ftrace_ops, there's no reason to
continue using the ftrace_func_hash to find which probe to call in the
function callback. The ops that is passed in to the function callback is
part of the probe_ops to call.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Have the function probes have their own ftrace_ops, and remove the
trace_probe_ops. This simplifies some of the ftrace infrastructure code.

Individual entries for each function is still allocated for the use of the
output for set_ftrace_filter, but they will be removed soon too.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Currently unregister_ftrace_function_probe_func() is a void function. It
does not give any feedback if an error occurred or no item was found to
remove and nothing was done.

Change it to return status and success if it removed something. Also update
the callers to return that feedback to the user.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

No users of the function probes uses the data field anymore. Remove it, and
change the init function to take a void *data parameter instead of a
void **data, because the init will just get the data that the registering
function was received, and there's no state after it is called.

The other functions for ftrace_probe_ops still take the data parameter, but
it will currently only be passed NULL. It will stay as a parameter for
future data to be passed to these functions.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

There are no users of unregister_ftrace_function_probe_all(). The only probe
function that is used is unregister_ftrace_function_probe_func(). Rename the
internal static function __unregister_ftrace_function_probe() to
unregister_ftrace_function_probe_func() and make it global.

Also remove the PROBE_TEST_FUNC as it would be always set.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Nothing calls unregister_ftrace_function_probe(). Remove it as well as the
flag PROBE_TEST_DATA, as this function was the only one to set it.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In order to move the ops to the function probes directly, they need a way to
map function ips to their own data without depending on the infrastructure
of the function probes, as the data field will be going away.

New helper functions are added that are based on the ftrace_hash code.
ftrace_func_mapper functions are there to let the probes map ips to their
data. These can be allocated by the probe ops, and referenced in the
function callbacks.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In preparation to cleaning up the probe function registration code, the
"data" parameter will eventually be removed from the probe->func() call.
Instead it will receive its own "ops" function, in which it can set up its
own data that it needs to map.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

As nothing outside the tracing directory uses the function command mechanism,
I'm moving the prototypes out of the include/linux/ftrace.h and into the
local kernel/trace/trace.h header. I plan on making them hook to the
trace_array structure which is local to kernel/trace, and I do not want to
expose it to the rest of the kernel. This requires that the command functions
must also be local to tracing. But luckily nothing else uses them.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

As nothing outside the tracing directory uses the function probes mechanism,
I'm moving the prototypes out of the include/linux/ftrace.h and into the
local kernel/trace/trace.h header. I plan on making them hook to the
trace_array structure which is local to kernel/trace, and I do not want to
expose it to the rest of the kernel. This requires that the probe functions
must also be local to tracing. But luckily nothing else uses them.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The function-fork option is same as event-fork that it tracks task
fork/exit and set the pid filter properly.  This can be useful if user
wants to trace selected tasks including their children only.

Link: http://lkml.kernel.org/r/20170417024430.21194-3-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

When function tracer has a pid filter, it adds a probe to sched_switch
to track if current task can be ignored.  The probe checks the
ftrace_ignore_pid from current tr to filter tasks.  But it misses to
delete the probe when removing an instance so that it can cause a crash
due to the invalid tr pointer (use-after-free).

This is easily reproducible with the following:

  # cd /sys/kernel/debug/tracing
  # mkdir instances/buggy
  # echo $$ > instances/buggy/set_ftrace_pid
  # rmdir instances/buggy

  ============================================================================
  BUG: KASAN: use-after-free in ftrace_filter_pid_sched_switch_probe+0x3d/0x90
  Read of size 8 by task kworker/0:1/17
  CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G    B           4.11.0-rc3  #198
  Call Trace:
   dump_stack+0x68/0x9f
   kasan_object_err+0x21/0x70
   kasan_report.part.1+0x22b/0x500
   ? ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   kasan_report+0x25/0x30
   __asan_load8+0x5e/0x70
   ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   ? fpid_start+0x130/0x130
   __schedule+0x571/0xce0
   ...

To fix it, use ftrace_clear_pids() to unregister the probe.  As
instance_rmdir() already updated ftrace codes, it can just free the
filter safely.

Link: http://lkml.kernel.org/r/20170417024430.21194-2-namhyung@kernel.org

Fixes: 0c8916c3 ("tracing: Add rmdir to remove multibuffer instances")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Register the function tracer right after the tracing buffers are initialized
in early boot up. This will allow function tracing to begin early if it is
enabled via the kernel command line.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

We get a lot of harmless warnings about this header file at W=1 level
because of an unusual function declaration:

kernel/trace/trace.h:766:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]

This moves the inline statement where it normally belongs, avoiding the
warning.

Link: http://lkml.kernel.org/r/20170123122521.3389010-1-arnd@arndb.de

Fixes: 4046bf02 ("ftrace: Expose ftrace_hash_empty and ftrace_lookup_ip")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The GLOB operation "~" should be able to work with the COMM filter key in
order to trace programs with a glob. For example

  echo 'COMM ~ "systemd*"' > events/syscalls/filter
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Use ftrace_hash instead of a static array of a fixed size.  This is
useful when a graph filter pattern matches to a large number of
functions.  Now hash lookup is done with preemption disabled to protect
from the hash being changed/freed.

Link: http://lkml.kernel.org/r/20170120024447.26097-3-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

It will be used when checking graph filter hashes later.

Link: http://lkml.kernel.org/r/20170120024447.26097-2-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
[ Moved ftrace_hash dec and functions outside of FUNCTION_GRAPH define ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>

Currently both the wakeup and irqsoff traces do not handle set_graph_notrace
well. The ftrace infrastructure will ignore the return paths of all
functions leaving them hanging without an end:

  # echo '*spin*' > set_graph_notrace
  # cat trace
  [...]
          _raw_spin_lock() {
            preempt_count_add() {
            do_raw_spin_lock() {
          update_rq_clock();

Where the '*spin*' functions should have looked like this:

          _raw_spin_lock() {
            preempt_count_add();
            do_raw_spin_lock();
          }
          update_rq_clock();

Instead, have the wakeup and irqsoff tracers ignore the functions that are
set by the set_graph_notrace like the function_graph tracer does. Move
the logic in the function_graph tracer into a header to allow wakeup and
irqsoff tracers to use it as well.

Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The function __buffer_unlock_commit() is called in a few places outside of
trace.c. But for the most part, it should really be inlined, as it is in the
hot path of the trace_events. For the callers outside of trace.c, create a
new function trace_buffer_unlock_commit_nostack(), as the reason it was used
was to avoid the stack tracing that trace_buffer_unlock_commit() could do.

Link: http://lkml.kernel.org/r/20161121183700.GW26852@two.firstfloor.orgReported-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

A new file is created:

 /sys/kernel/debug/tracing/trace_marker_raw

This allows for appications to create data structures and write the binary
data directly into it, and then read the trace data out from trace_pipe_raw
into the same type of data structure. This saves on converting numbers into
ASCII that would be required by trace_marker.
Suggested-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Use glob_match() to support flexible glob wildcards (*,?)
and character classes ([) for ftrace.
Since the full glob matching is slower than the current
partial matching routines(*pat, pat*, *pat*), this leaves
those routines and just add MATCH_GLOB for complex glob
expression.

e.g.
----
[root@localhost tracing]# echo 'sched*group' > set_ftrace_filter
[root@localhost tracing]# cat set_ftrace_filter
sched_free_group
sched_change_group
sched_create_group
sched_online_group
sched_destroy_group
sched_offline_group
[root@localhost tracing]# echo '[Ss]y[Ss]_*' > set_ftrace_filter
[root@localhost tracing]# head set_ftrace_filter
sys_arch_prctl
sys_rt_sigreturn
sys_ioperm
SyS_iopl
sys_modify_ldt
SyS_mmap
SyS_set_thread_area
SyS_get_thread_area
SyS_set_tid_address
sys_fork
----

Link: http://lkml.kernel.org/r/147566869501.29136.6462645009894738056.stgit@devboxAcked-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The hwlat tracer uses tr->max_latency, and if it's the only tracer enabled
that uses it, the build will fail. Add max_latency and its file when the
hwlat tracer is enabled.

Link: http://lkml.kernel.org/r/d6c3b7eb-ba95-1ffa-0453-464e1e24262a@infradead.orgReported-by: NRandy Dunlap <rdunlap@infradead.org>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The hardware latency tracer has been in the PREEMPT_RT patch for some time.
It is used to detect possible SMIs or any other hardware interruptions that
the kernel is unaware of. Note, NMIs may also be detected, but that may be
good to note as well.

The logic is pretty simple. It simply creates a thread that spins on a
single CPU for a specified amount of time (width) within a periodic window
(window). These numbers may be adjusted by their cooresponding names in

   /sys/kernel/tracing/hwlat_detector/

The defaults are window = 1000000 us (1 second)
                 width  =  500000 us (1/2 second)

The loop consists of:

	t1 = trace_clock_local();
	t2 = trace_clock_local();

Where trace_clock_local() is a variant of sched_clock().

The difference of t2 - t1 is recorded as the "inner" timestamp and also the
timestamp  t1 - prev_t2 is recorded as the "outer" timestamp. If either of
these differences are greater than the time denoted in
/sys/kernel/tracing/tracing_thresh then it records the event.

When this tracer is started, and tracing_thresh is zero, it changes to the
default threshold of 10 us.

The hwlat tracer in the PREEMPT_RT patch was originally written by
Jon Masters. I have modified it quite a bit and turned it into a
tracer.
Based-on-code-by: NJon Masters <jcm@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently ftrace_graph_ent{,_entry} and ftrace_graph_ret{,_entry} struct
can have padding bytes at the end due to alignment in 64-bit data type.
As these data are recorded so frequently, those paddings waste
non-negligible space.  As the ring buffer maintains alignment properly
for each architecture, just to remove the extra padding using 'packed'
attribute.

  ftrace_graph_ent_entry:  24 -> 20
  ftrace_graph_ret_entry:  48 -> 44

Also I moved the 'overrun' field in struct ftrace_graph_ret to minimize
the padding in the middle.

Tested on x86_64 only.

Link: http://lkml.kernel.org/r/1467197808-13578-1-git-send-email-namhyung@kernel.org

Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 345ddcc8 ("ftrace: Have set_ftrace_pid use the bitmap like events
do") placed ftrace_init_tracefs into the instance creation, and encapsulated
the top level updating with an if conditional, as the top level only gets
updated at boot up. Unfortunately, this triggers section mismatch errors as
the init functions are called from a function that can be called later, and
the section mismatch logic is unaware of the if conditional that would
prevent it from happening at run time.

To make everyone happy, create a separate ftrace_init_tracefs_toplevel()
routine that only gets called by init functions, and this will be what calls
other init functions for the toplevel directory.

Link: http://lkml.kernel.org/r/20160704102139.19cbc0d9@gandalf.local.homeReported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reported-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 345ddcc8 ("ftrace: Have set_ftrace_pid use the bitmap like events do")
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Convert set_ftrace_pid to use the bitmap like set_event_pid does. This
allows for instances to use the pid filtering as well, and will allow for
function-fork option to set if the children of a traced function should be
traced or not.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The addition of PIDs into a pid_list via the write operation of
set_event_pid is a bit complex. The same operation will be needed for
function tracing pids. Move the code into its own generic function in
trace.c, so that we can avoid duplication of this code.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>