- 20 8月, 2009 40 次提交
-
-
由 Ivo van Doorn 提交于
The bss_info_changed() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver directly. Additionaly this makes the DRIVER_REQUIRE_SCHEDULED flag redundant so it can be removed. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The configure_filter() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver configure_filter() directly. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
This fixes: CHECK drivers/net/wireless/ipw2x00/ipw2100.c drivers/net/wireless/ipw2x00/ipw2100.c:7888:22: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:7952:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8000:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here CC [M] drivers/net/wireless/ipw2x00/ipw2100.o CHECK drivers/net/wireless/ipw2x00/ipw2200.c drivers/net/wireless/ipw2x00/ipw2200.c:847:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:891:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:935:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:980:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1016:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1051:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1823:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6228:28: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6369:20: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6857:12: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:7964:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8720:12: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9662:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9720:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9826:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:10318:21: warning: symbol 'remaining_bytes' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:10184:13: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8338:45: warning: cast to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: expected restricted __le16 [usertype] size drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: got unsigned short [unsigned] [usertype] <noident> drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: expected restricted __le16 [usertype] tx_rates drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: got unsigned short [unsigned] [usertype] rates_mask drivers/net/wireless/ipw2x00/ipw2200.c:6124:29: warning: bad assignment (>>=) to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6130:31: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6140:23: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6149:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6154:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6159:55: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: warning: invalid assignment: |= drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: right side has type unsigned short drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: expected signed char [signed] [usertype] [explicitly-signed] rt_dbmnoise drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: got restricted __le16 [usertype] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: expected signed char [signed] [usertype] [explicitly-signed] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: got restricted __le16 [usertype] noise Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Cc: Zhu Yi <yi.zhu@intel.com> Acked-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
CC [M] drivers/net/wireless/wl12xx/wl1271_main.o drivers/net/wireless/wl12xx/wl1271_main.c: In function ‘wl1271_op_add_interface’: drivers/net/wireless/wl12xx/wl1271_main.c:611: warning: ‘print_mac’ is deprecated (declared at include/linux/if_ether.h:142) Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
In ath9k_stop(), tx_complete_work was being cancelled twice. This patch fixes it. Also, locking sc->mutex should be done at the beginning. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
After initial power-up, the embedded cpu is usually halted. However, if we down the interface and only do a soft reset before bringing the interface back up, it will still be running and the firmware loading code will bail out. This change halts the CPU before loading the firmware, enabling a second call to wl1251_boot() to succeed without a hard reset. Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Benoit PAPILLAULT 提交于
rt2800pci can handle different retry rates, it will always step 1 rate down after a failed transmission so creating the retry rate list for mac80211 is quite simple. Signed-off-by: NBenoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
According to the original Ralink driver, LG_FBK_CFG0_OFDMMCS2FBK should be initialized to 9 rather then 3. Based on a patch for rt2800pci from Benoit Signed-off-by: NBenoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
In the TX descriptor the Packet ID must not be 0, so add 1 to the ID. The wireless CLI ID is not allowed to be 0 either, but also must be initialized with the wcid value rather then keyid. Based on a patch for rt2800pci from Benoit Signed-off-by: NBenoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
When the RX descriptor indicates the frame was L2 padded, the SKBDESC_L2_PADDED flag should be set to make sure the L2 padding is removed before it is send to mac80211. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Add new defines for RF chipsets which can be found by the driver. We don't have to check for these chips specifically yet, but it is better to have the defines in now. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Fixed comments about SHARED_KEY_TABLE_BASE and SHARED_KEY_MODE_BASE. Fixed initialization loop for SHARED_KEY_MODE_ENTRY. Based on a patch for rt2800pci from Benoit. Signed-off-by: NBenoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The rfkill_poll callback function in the drivers check a bit to see if the RFKILL key has been pressed. However when the bit is set it means the radio is active and the device can be used. The wiphy_rfkill_set_hw_state() function expects the inversed, so '1' must be send when the radio must be disabled. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Call set_tx_power_control with a LPPHY_TXPCTL rather than an LPPHY_TX_PWR_CTL_CMD_MODE. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Check the mode the hardware is in, not the mode we used the last time. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
ACX_SLV_SOFT_RESET_BIT and ACX_REG_EEPROM_START_BIT are both defined as "1" in the vendor driver code, but they were defined to be BIT(1) ("2") here. The SOFT_RESET typo ensures that wl1251_boot_soft_reset() doesn't; as a result the device hangs when trying to reprogram the PLL registers while running. Signed-off-by: NBob Copeland <me@bobcopeland.com> Acked-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
All but two drivers have now stopped using the two deprecated members radio_enabled and beacon_int, so it's about time to remove them for good. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Over time, a whole bunch of drivers have come up with their own scheme to delay the configure_filter operation to a workqueue. To be able to simplify things, allow configure_filter to sleep, and add a new prepare_multicast callback that drivers that need the multicast address list implement. This new callback must be atomic, but most drivers either don't care or just calculate a hash which can be done atomically and then uploaded to the hardware non-atomically. A cursory look suggests that at76c50x-usb, ar9170, mwl8k (which is actually very broken now), rt2x00, wl1251, wl1271 and zd1211 should make use of this new capability. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Larry has reported success getting scan data with an LP-PHY device, so it's probably time to release LP-PHY support for testing. Also disable 802.11a support for now, as 802.11a currently causes the driver to panic on startup (NULL pointer dereference). Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
The spec for initializing the B2062 radio have changed recently, update the code to match the changes. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
I missed the "+16" part of the instruction in the specs. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
A few typos have been discovered in both the specs and the code. This patch fixes them. Also use lpphy_op_switch_channel consistently, and make all users of it print its return value for easier debugging. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
The channel switch routine had a whole instruction missing. Add it. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
The spec had some nasty typos, and a large part of the rev0/1 BB init procedure was also missing. Fix these. Also make the init-time channel switch debuggable. (The change from -EINVAL to -EIO is simply to make it possible to distinguish the PLL charge pump error from a channel-not-found error.) Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Don't drop all packets received from an LP-PHY with WARN_ON. Also update a comment with LP-specific information. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
This should fix the remaining WARN_ON. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Rev2+ never needs to have gain tables adjusted according to the spec. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
-Enable rate memory init for LP-PHY (same as G and N-PHY). -Mark rev.2 LP-PHYs with the B2063 radio as supported. -Allow using the 5GHz band on LP-PHYs. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Add support for loading LP-PHY firmware to b43_try_request_fw. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Johannes kindly pointed out that I completely missed a hunk in his patch: "[PATCH] cfg80211: allow driver to override PS default". The driver must explicitly set ps_default to false, as the setting is pre-filled with the kconfig default. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
Enable AsyncFIFO and AGGWEP for AR9287_12 and later revisions only. Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
-Move pdiv from lpphy_2062_init to struct b43_phy_lp. -Add channel table for the B2062 radio. -Add code for tuning the B2062 radio to channel. -Add error handling to op_switch_channel, and use it for both radios. Rev0/1/B2062 will now hopefully show some signs of life, though it won't work at full performance, as calibration is still missing. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Rev.2+/B2063 will now hopefully show some signs of life, though it won't work at full performance, as calibration is still missing. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Yurovsky 提交于
sparse complains about a bad constant expression due to the use of a dynamic-sized array in get_common_rates(). Allocate and free the array instead. Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-