- 02 10月, 2012 2 次提交
-
-
由 Haojian Zhuang 提交于
The initilization of GPADC is moved from core driver to touch driver with DT support. Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Haojian Zhuang 提交于
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 29 9月, 2012 2 次提交
-
-
由 Jason Gerecke 提交于
If the ExpressKeys on the Intuos5 are touched, they currently result an out-of-prox packet being sent even if the pad is already out of prox. This can cause some confusion in the X driver. To restore the expected semantics, we make being touched a sufficient condition to signal proximity. https://bugs.freedesktop.org/show_bug.cgi?id=54250Reported-by: NTimo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: NJason Gerecke <killertofu@gmail.com> Reviewed-by: NChris Bagwell <chris@cnpbagwell.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Seth Forshee 提交于
Commit c0394506 (Input: synaptics - handle out of bounds values from the hardware) caused any hardware reported values over 7167 to be treated as a wrapped-around negative value. It turns out that some firmware uses the value 8176 to indicate a finger near the edge of the touchpad whose actual position cannot be determined. This value now gets treated as negative, which can cause pointer jumps and broken edge scrolling on these machines. I only know of one touchpad which reports negative values, and this hardware never reports any value lower than -8 (i.e. 8184). Moving the threshold for treating a value as negative up to 8176 should work fine then for any hardware we currently know about, and since we're dealing with unspecified behavior it's probably the best we can do. The special 8176 value is also likely to result in sudden jumps in position, so let's also clamp this to the maximum specified value for the axis. BugLink: http://bugs.launchpad.net/bugs/1046512 https://bugzilla.kernel.org/show_bug.cgi?id=46371 Cc: stable@vger.kernel.org Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Tested-by: NAlan Swanson <swanson@ukfsn.org> Tested-by: NArteom <arutemus@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 22 9月, 2012 1 次提交
-
-
由 Mika Westerberg 提交于
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 21 9月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
This is only used by omap1. And to fix things properly, this should not be included from the drivers at all. Acked-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 20 9月, 2012 21 次提交
-
-
由 Lee Jones 提交于
This reverts commit ca3b3faf. There was a plan to place ab8500_irq_get_virq() calls in each AB8500 child device prior to requesting an IRQ, but as we're no longer using Device Tree to collect our IRQ numbers, it's actually better to allow the core to do this during device registration time. So the IRQ number we pull from its resource has already been converted to a virtual IRQ. Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Axel Lin 提交于
copy_to_user() returns the number of bytes remaining, but we want a negative error code here. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Tai-hwa Liang 提交于
When lifing finger off the surface some versions of touchpad send movement packets with very low coordinates, which cause cursor to jump to the upper left corner of the screen. Let's ignore least significant bits of X and Y coordinates if higher bits are all zeroes and consider finger not touching the pad. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43197Reported-and-tested-by: NAleksey Spiridonov <leks13@leks13.ru> Tested-by: NEddie Dunn <eddie.dunn@gmail.com> Tested-by: NJakub Luzny <limoto94@gmail.com> Tested-by: NOlivier Goffart <olivier@woboq.com> Signed-off-by: NTai-hwa Liang <avatar@sentelic.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Pawel Moll 提交于
Clocks must be prepared before enabling and unprepared after disabling. Use appropriate functions to do this in one go. Signed-off-by: NPawel Moll <pawel.moll@arm.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Anisse Astier 提交于
On Toshiba Satellite C850D, the touchpad and the keyboard might randomly not work at boot. Preventing MUX mode activation solves this issue. Signed-off-by: NAnisse Astier <anisse@astier.eu> Cc: stable@kernel.org Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Henrik Rydberg 提交于
Use of the in-kernel tracking code to convert the driver to MT-B. With ten fingers on the pad, the in-kernel tracking adds approximately 25 us to the maximum irqsoff latency. Under normal workloads, however, the tracking has no measurable effect. Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
The logical scale is used to produce special finger width values to userspace, but has become an unnecessary restriction for everything else. Also, the bcm5974 trackpads are very accurate and work well without hysteresis. This patch simplifies the driver and device data by removing the logical scale, and by moving the special synaptics code out of the main path. Also add the orientation range, needed in a subsequent patch, to the device configuration. Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
Rename touch properties to match established nomenclature, and define the maximum number of fingers. Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
The early generations with this trackpad used the separate mouse interface to produce button events. With the introduction of the button pads, this information was moved to the trackpad interface, leaving the mouse interface unused. The driver is still setting up both interfaces, which has not caused any problems - until now. It turns out that without the CONFIG_USB_EHCI_TT_NEWSCHED option, the driver may return an ENOSPC upon bt_urb submission, resulting in a failure to open the device. This happens everytime on the MacBookPro Retina (and likely on other mid-2012 models), but earlier MacBook models seem to work fine. This patch skips the bt_urb setup for TYPE2 devices, which arguably should have been done in the first place. Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
Some drivers like to report ABS_PRESSURE in a special way. Allow this when ABS_MT_PRESSURE is not defined. Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
Some devices use an internal key for tracking which cannot be directly mapped to slots. This patch provides a key-to-slot mapping, which can be used by drivers of such devices. Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
With the INPUT_MT_TRACK flag set, the function input_mt_assign_slots() can be used to match a new set of contacts against the currently used slots. The algorithm used is based on Lagrange relaxation, and performs very well in practice; slower than mtdev for a few corner cases, but faster in most commonly occuring cases. Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
Most MT drivers perform the same actions on frame synchronization. Some actions, like dropping unseen contacts, are also unnecessarily complex. Collect common frame synchronization tasks in a new function, input_mt_sync_frame(). Depending on the flags set, it drops unseen contacts and performs pointer emulation. With init flags and frame synchronization in place, most MT drivers can be simplified. First out are the bcm5974 and hid-multitouch drivers, following this patch. Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
Preparing to move more repeated code into the mt core, add a flags argument to the input_mt_slots_init() function. Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
By sending a full frame of events at the same time, the irqsoff latency at heavy load is brought down from 200 us to 100 us. Cc: Daniel Kurtz <djkurtz@chromium.org> Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
On heavy event loads, such as a multitouch driver, the irqsoff latency can be as high as 250 us. By accumulating a frame worth of data before passing it on, the latency can be dramatically reduced. As a side effect, the special EV_SYN handling can be removed, since the frame is now atomic. This patch adds the events() handler callback and uses it if it exists. The latency is improved by 50 us even without the callback. Cc: Daniel Kurtz <djkurtz@chromium.org> Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
Preparing to split event filtering and event passing, move the autorepeat function to the point where the event is actually passed. Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
For some EV_KEY types, sending a larger-than-one value causes the input state to oscillate. This patch makes sure this cannot happen, clearing up the autorepeat bypass logic in the process. Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
The events-per-packet estimate has so far been used by MT devices only. This patch adjusts the packet buffer size to also accomodate the KEY and MSC events. Keyboards normally send one or two keys at a time. MT devices normally send a number of button keys along with the MT information. The buffer size chosen here covers those cases, and matches the default buffer size in evdev. Since the input estimate is now preferred, remove the special input-mt estimate. Reviewed-and-tested-by: NPing Cheng <pingc@wacom.com> Tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Henrik Rydberg 提交于
Move all MT-related things to a separate place. This saves some bytes for non-mt input devices, and prepares for new MT features. Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
由 Dmitry Torokhov 提交于
This reverts commit ca3b3faf. There was a plan to place ab8500_irq_get_virq() calls in each AB8500 child device prior to requesting an IRQ, but as we're no longer using Device Tree to collect our IRQ numbers, it's actually better to allow the core to do this during device registration time. So the IRQ number we pull from its resource has already been converted to a virtual IRQ. Signed-off-by: NLee Jones <lee.jones@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 19 9月, 2012 4 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the spear include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NTony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
-
由 Arnd Bergmann 提交于
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 18 9月, 2012 1 次提交
-
-
由 Peter Ujfalusi 提交于
Add support when the kernel has been booted with DT blob. In this case the pdata is NULL, we need to reach up to the core node and check if the codec part has been enabled to determine if we need to coexist with the codec or not. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 14 9月, 2012 5 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the nomadik include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NFelipe Balbi <balbi@ti.com> Acked-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andreas Westin <andreas.westin@stericsson.com>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the w90x900 include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NIgor Grinberg <grinberg@compulab.co.il> Acked-by: NJeff Garzik <jgarzik@redhat.com> Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr> Acked-by: NPaul Parsons <lost.distance@yahoo.com> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Acked-By: NStefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the ep93xx include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NHartley Sweeten <hsweeten@visionengravers.com> Acked-by: NRyan Mallon <rmallon@gmail.com> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Axel Lin <axel.lin@gmail.com>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
-
- 13 9月, 2012 3 次提交
-
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
pdata->nbuttons should be updated by the dt code. Signed-off-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Tony Lindgren 提交于
Remove support for omap2+ as it's no longer needed since it's using matrix-keypad. This way we can remove depency to plat and mach headers which is needed for ARM common zImage support. Also remove INT_KEYBOARD by using omap_kp->irq. Note that this patch depends on an earlier patch "ARM: OMAP: Move gpio.h to include/linux/platform_data". Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Acked-by: NSourav Poddar <sourav.poddar@ti.com> Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-