The DACs on Sigmatel/IDT codecs do mute at the lowest volume level,
and in the earlier drivers, we passed TLV_DB_SCALE_MUTE bit for each
volume control element like Speaker and Headphone as well as Master.
Along with the translation to the generic parser, however, the TLV bit
was lost for the slave controls (e.g. Speaker) but set only to
Master.  In theory this should have sufficed, but apps, particularly
PA, do care the slave volume bits, so we seem to see a regression in
the volume controls.

This patch adds a flag to hda_gen_spec to specify the DAC mute
feature, and adds the TLV bit properly for all relevant volume
controls.  Also, the TLV bit for vmaster is set in hda_generic.c, so
that we can get rid of all tricks from the codec driver side.

As the similar hack is applied to Conexant 5051 stuff, we can get rid
of it as well.

BugLink: https://bugs.launchpad.net/bugs/1357928Signed-off-by: NTakashi Iwai <tiwai@suse.de>

...by factoring out common parts to the just added pin macros.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This will be used in a later patch to make the pin quirk table shorter.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Adds to the readability of the ice1712 driver.
Signed-off-by: NKonstantinos Tsimpoukas <kostaslinuxxx@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

as broken user-visible strings breaks the ability to grep for them , so this patch fixes the broken user-visible strings
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

as pr_* macros are more preffered over printk, so printk replaced with corresponding pr_err and pr_alert
this patch will generate a warning from checkpatch for an unnecessary space before new line and has not been fixed as this patch is only for printk replacement.
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

replaced printk with corresponding pr_err
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are many codes doing writes or updates COEF verbs sequentially
in a batch.  Rewrite such open codes with tables for optimization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... and rewrite a few open codes with them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just a refactoring.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just a refactoring using the existing helper functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The helper functions snd_hda_check_board_config() and
snd_hda_check_board_codec_sid_config() are no longer used since the
transition to the generic parser and all quirks have been replaced
with fixups.  Let's kill these dead codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On some HP laptops, the mute led is controlled by codec gpio.

When some machine resume from s3/s4, the codec gpio data will be
cleared to 0 by BIOS:
Before suspend:
  IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
After resume:
  IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0

To skip the AFG node to enter D3 can't fix this problem.

A workaround is to restore the gpio data when the system resume
back from s3/s4. It is safe even on the machines without this
problem.

BugLink: https://bugs.launchpad.net/bugs/1358116Tested-by: NFranz Hsieh <franz.hsieh@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC269 & co have many vendor-specific setups with COEF verbs.
However, some verbs seem specific to some codec versions and they
result in the codec stalling.  Typically, such a case can be avoided
by checking the return value from reading a COEF.  If the return value
is -1, it implies that the COEF is invalid, thus it shouldn't be
written.

This patch adds the invalid COEF checks in appropriate places
accessing ALC269 and its variants.  The patch actually fixes the
resume problem on Acer AO725 laptop.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181Tested-by: NFrancesco Muzio <muziofg@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Conexnat HD-audio driver has a workaround for cx5051 (aka CX20561)
chip to add fake mute controls to each amp (commit 3868137e).  This
implies the minimum-as-mute TLV bit in TLV for each corresponding
control.  Meanwhile we build the virtual master from these, but the
TLV bit is missing, even though the slaves have it.

This patch simply adds the missing TLV_DB_SCALE_MUTE bit for vmaster,
as already done in patch_sigmatel.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines.  This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// <smpl>

@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@

- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;

// </smpl>

[bhelgaas: add semantic patch]
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

CA0132 driver tries to reload the firmware at resume.  Usually this
works since the firmware loader core caches the firmware contents by
itself.  However, if the driver failed to load the firmwares
(e.g. missing files), reloading the firmware at resume goes through
the actual file loading code path, and triggers a kernel WARNING like:

 WARNING: CPU: 10 PID:11371 at drivers/base/firmware_class.c:1105 _request_firmware+0x9ab/0x9d0()

For avoiding this situation, this patch makes CA0132 skipping the f/w
loading at resume when it failed at probe time.
Reported-and-tested-by: NJanek Kozicki <cosurgi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If nid 0x15 (Headphone Playback Switch) is in D3 and headphones are
plugged in when the laptop reboots, a pop noise is generated.
Prevent this by keeping nid 0x15 in D0 when headphones are plugged in.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If the laptop is powered on with a jack plugged in, independently on what
is plugged, the jack is treated as a microphone jack.

Initialize the capture source so that by default jacks are treated as
headphones jacks. This will also prevent pop noises on boot in case
headphones are plugged in since setting/unsetting mic-in as input source
causes a pop noise.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CMI8888 codec chip has a boost amp (only) on the headphone pin, and
this confuses the generic parser, which tends to pick up the most
outside amp.  This results in the wrong volume setup, as the driver
complains like:
  hda_codec: Mismatching dB step for vmaster slave (-100!=1000)

For avoiding this problem, rule out the amp on NID 0x10 and create
"Headphone Amp" volume control manually instead.

Note that this patch still doesn't fix all problems yet.  The sound
output from the line out seems still too low.  It will be fixed in
another patch (hopefully).
Reported-and-tested-by: NVincent Lejeune <vljn@ovi.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASUS Phoebus with CMI8888 HD-audio chip (PCI id 13f6:5011) doesn't
work with HD-audio driver as is because of some weird nature.  For
making DMA properly working, we need to disable MSI.  The position
report buffer doesn't work, thus we need to force reading LPIB
instead.  And yet, the codec CORB/RIRB communication gives errors
unless we disable the snooping (caching).

In this patch, all these workarounds are added as a quirk for the
device.  The HD-audio *codec* chip needs yet another workaround, but
it'll be provided in the succeeding patch.
Reported-and-tested-by: NVincent Lejeune <vljn@ovi.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It will be recording voice delay for resume back recording for Headset Mic.
This alc286 will quickly open Headset Mic, to prevent avoid recording files are missing.
The issue was fixed. This is follow ALC286 programing guide.

[fix build error, add static and renamed the function by tiwai]
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just add the PCI ID for the STX II.  It appears to work the same as the
STX, except for the addition of the not-yet-supported daughterboard.
Tested-by: NMario <fugazzi99@gmail.com>
Tested-by: Ncorubba <corubba@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NHans Wennborg <hans@hanshq.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds codec ID (0x80862883) and module alias for Braswell
display codec.
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add HD Audio Device PCI ID for the Intel Braswell platform.
It is an HDA Intel PCH controller.

AZX_DCAPS_ALIGN_BUFSIZE is not necessary for this controller.
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The mic mute led on dell laptops is controlled by the wmi driver.
Followed this part being merged to the kernel, we add the mic mute led
hook in the hda driver.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ON the machine, two pin complex (0xb and 0xe) are both routed to
the same external right-side mic jack, this makes the jack can't work.

To fix this problem, set the 0xe to "not connected".

BugLink: https://bugs.launchpad.net/bugs/1350148Tested-by: NFranz Hsieh <franz.hsieh@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell XPS 15 (1028:05fe) gives the bad feedback noise from analog
loopback line even if the channels are muted.  The similar problem has
been seen on XPS 13, and it was fixed by simply disabling loopback.
The same fixup was confirmed to be applicable and fix the problem on
XPS 15, too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80821Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new quirk table to make sure that pin quirks have a higher
priority than quirks that apply to an entire vendor.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Previously, calling one quirk function first and another later
would make the latter one take priority, this is now changed
to make the former take priority.

By adding two special values for fixup_id we can also get rid of the
fixup_forced flag.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>