- 26 9月, 2007 27 次提交
-
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PPP_MPPE]: Don't put InterimKey on the stack SCTP : Add paramters validity check for ASCONF chunk SCTP: Discard OOTB packetes with bundled INIT early. SCTP: Clean up OOTB handling and fix infinite loop processing SCTP: Explicitely discard OOTB chunks SCTP: Send ABORT chunk with correct tag in response to INIT ACK SCTP: Validate buffer room when processing sequential chunks [PATCH] mac80211: fix initialisation when built-in [PATCH] net/mac80211/wme.c: fix sparse warning [PATCH] cfg80211: fix initialisation if built-in [PATCH] net/wireless/sysfs.c: Shut up build warning
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SUNSAB]: Fix broken SYSRQ.
-
git://git.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'trivial' of git://git.kernel.dk/data/git/linux-2.6-block: cdrom_open() forgets to unlock on -EROFS failure exits
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_sis: add missing UDMA5 timing value in sis_66_set_dmamode() sata_sil24: fix IRQ clearing race when PCIX_IRQ_WOC is used
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: hpet: ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0 ACPI: CONFIG_ACPI_SLEEP=n power off regression in 2.6.23-rc8 (NOT in rc7) ACPI: suspend: build-fix for CONFIG_SUSPEND=n and CONFIG_HIBERNATION=y
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] WE : Add missing auth compat-ioctl [PATCH] softmac: Fix inability to associate with WEP networks
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Michal Schmidt 提交于
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
If ADDIP is enabled, when an ASCONF chunk is received with ASCONF paramter length set to zero, this will cause infinite loop. By the way, if an malformed ASCONF chunk is received, will cause processing to access memory without verifying. This is because of not check the validity of parameters in ASCONF chunk. This patch fixed this. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
RFC 4460 and future RFC 4960 (2960-bis) specify that packets with bundled INIT chunks need to be dropped. We currenlty do that only after processing any leading chunks. For OOTB chunks, since we already walk the entire packet, we should discard packets with bundled INITs. There are other chunks chunks that MUST NOT be bundled, but the spec is silent on theire treatment. Thus, we'll leave their teatment alone for the moment. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NWei Yongjun <yjwei@cn.fujitsu.com>
-
由 Vlad Yasevich 提交于
While processing OOTB chunks as well as chunks with an invalid length of 0, it was possible to SCTP to get wedged inside an infinite loop because we didn't catch the condition correctly, or didn't mark the packet for discard correctly. This work is based on original findings and work by Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
Explicitely discard OOTB chunks, whether the result is a SHUTDOWN COMPLETE or an ABORT. We need to discard the OOTB SHUTDOWN ACK to prevent bombing attackes since responsed MUST NOT be bundled. We also explicietely discard in the ABORT case since that function is widely used internally. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com>
-
由 Wei Yongjun 提交于
When SCTP client received an INIT ACK chunk with missing mandatory parameter such as "cookie parameter", it will send back a ABORT with T-bit not set and verification tag is set to 0. This is because before we accept this INIT ACK chunk, we do not know the peer's tag. This patch change to reflect vtag when responding to INIT ACK with missing mandatory parameter. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
When we process bundled chunks, we need to make sure that the skb has the buffer for each header since we assume it's always there. Some malicious node can send us something like DATA + 2 bytes and we'll try to walk off the end refrencing potentially uninitialized memory. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Johannes Berg 提交于
When mac80211 is built into the kernel it needs to init earlier so that device registrations are run after it has initialised. The same applies to rate control algorithms. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
wme.c triggers a sparse warning; it wasn't noticed before because until recently ARRAY_SIZE triggered a sparse error. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When cfg80211 is built into the kernel it needs to init earlier so that device registrations are run after it has initialised. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Satyam Sharma 提交于
net/wireless/sysfs.c:108: warning: ‘wiphy_uevent’ defined but not used when CONFIG_HOTPLUG=n is because the only usage site of this function is #ifdef'ed as such, so let's #ifdef the definition also. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Thomas Bogendoerfer 提交于
Include SYSRQ support for SUNSAB if SUNSAB_CONSOLE is selected Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tejun Heo 提交于
sis_66_set_dmamode() also handles early UDMA100 (SIS630 ET) but is missing udma timing value for UDMA100. According to sis5513, this should be 0x8000. This caused UDMA100 device to fail on pata_sis till it downgrades to UDMA66 while it works fine on sis5513 at UDMA100. Reported by Adam Blech. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Adam Blech <desaster.area@addcom.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
When PCIX_IRQ_WOC is used, sil24 has an inherent race condition between clearing IRQ pending and reading IRQ status. If IRQ pending is cleared after reading IRQ status, there's possibility of lost IRQ. If IRQ pending is cleared before reading IRQ status, spurious IRQs will occur. sata_sil24 till now cleared IRQ pending after reading IRQ status thus losing IRQs on machines where PCIX_IRQ_WOC was used. Reverse the order and ignore spurious IRQs if PCIX_IRQ_WOC. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Zhao Yakui 提交于
If hpet has been initialized before registering hpet driver, the callback function of hpet_resources will return the status code of -EBUSY, which is not defined in the ACPI exception table. So when ACPI checks the status code of callback function, it will report the unknown exception code. So the status code in ACPI is used instead of the generic error code in the ACPI callback function of hpet_resources. For example: -EBUSY is replaced by AE_ALREADY_EXISTS -EINVAL is replaced by AE_NO_MEMORY http://bugzilla.kernel.org/show_bug.cgi?id=8630Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alexey Starikovskiy 提交于
This fixes compilation with CONFIG_SUSPEND unset and CONFIG_HIBERNATION set (raf. http://marc.info/?l=linux-acpi&m=119055289723895&w=4). Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Jeff Garzik 提交于
Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_transport_spi: fix domain validation failure from incorrect width setting
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - fix idle reset logic
-
- 25 9月, 2007 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Ensure FULL_REGS on exec
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Revert "drivers/net/pcmcia/3c589_cs: fix port configuration switcheroo" sky2: be more selective about FIFO watchdog sky2: FE+ Phy initialization r8169: workaround against ignored TxPoll writes (8168) r8169: correct phy parameters for the 8110SC
-
由 Rusty Russell 提交于
The assembly templates for lguest guest patching are in the .init.text section. This means that modules get patched with "cc cc cc cc" or similar junk. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Danny ter Haar 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Need to null terminate environment. Found by inspection while looking for similar problems to platform uevent bug Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cliff Wickman 提交于
The vma_data structure may be shared by vma's from multiple tasks, with no way of knowing which areas are shared or not shared, so release/clear pages only when the refcount (of vma's) goes to zero. Signed-off-by: NCliff Wickman <cpw@sgi.com> Cc: Jes Sorensen <jes@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
Different types of ufs hold state in different places, to hide complexity of this, there is ufs_get_fs_state, it returns state according to "UFS_SB(sb)->s_flags", but during mount ufs_get_fs_state is called, before setting s_flags, this cause message for ufs types like sun ufs: "fs need fsck", and remount in readonly state. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
When PTRACE_O_TRACEEXEC is used, a ptrace call to fetch the registers at the PTRACE_EVENT_EXEC stop (PTRACE_PEEKUSR) will oops in CHECK_FULL_REGS. With recent versions, "gdb --args /bin/sh -c 'exec /bin/true'" and "run" at the (gdb) prompt is sufficient to produce this. I also have written an isolated test case, see https://bugzilla.redhat.com/show_bug.cgi?id=301791#c15. This change fixes the problem by clearing the low bit of pt_regs.trap in start_thread so that FULL_REGS is true again. This is correct since all of the GPRs that "full" refers to are cleared in start_thread. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeff Garzik 提交于
Merge branch 'r8169-for-jeff-20070919' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp
-
由 Jeff Garzik 提交于
This reverts commit fadacb1b. The change being reverted made the driver consistent with include/linux/netdevice.h, but then inconsistent with the other PCMCIA ethernet drivers. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Thomas Rohwer 提交于
Idle count should only be incremented when touchpad button is not pressed, otherwise reset may happen at a wrong time and touchpad will never report button release event. Signed-off-by: NThomas Rohwer <trohwer@tng.de> Acked-by: NMatthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Stephen Hemminger 提交于
Be more selective about when to enable the ram buffer watchdog code. It is unnecessary on XL A3 or later revs, and with Yukon FE the buffer is so small (4K) that the watchdog detects false positives. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
One more snippet of PHY initialization required for FE+ chips. Discovered in latest sk98lin 10.21.1.3 driver. Please apply to 2.6.23. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-