- 01 11月, 2006 5 次提交
-
-
This lock protects ubd setup and teardown, so is only used in process context; beyond that, during such setup memory allocations must be performed and some generic functions which can sleep must be called (such as add_disk()). So the only correct solution is to make it a mutex instead of a spin_lock. No other change is done - this lock must be acquired in different places but it's done afterwards. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
To rethink locking, I needed to understand well what each function does. While doing this I renamed some: * ubd_close -> ubd_close_dev (since it pairs with ubd_open_dev) * ubd_new_disk -> ubd_disk_register (it handles registration with the block layer - one hopes this makes clearer the difference with ubd_add()) Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Rename the ubd_dev array to ubd_devs and then call any "struct ubd" ubd_dev instead of dev, which doesn't make clear what we're treating (and no, it's not hungarian notation - not any more than calling all vm_area_struct vma or all inodes inode). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Add documentation about some fields in struct ubd, whose meaning is non-obvious due to struct names (should change names altogether, I agree). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
With 256 minors and 16 minors used per each UBD device, we can allow the use of up to 16 UBD devices per UML. Also chnage parse_unit and leave to the caller (which already do it) the check for excess numbers, since this is just supposed to do raw parsing. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 10月, 2006 1 次提交
-
-
由 Al Viro 提交于
Real fix for UML pt_regs stuff. Note set_irq_regs() logics in there... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 1 次提交
-
-
由 Dave Jones 提交于
kbuild explicitly includes this at build time. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 01 10月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
After Christophs SCSI change, the only usage left is RQ_ACTIVE and RQ_INACTIVE. The block layer sets RQ_INACTIVE right before freeing the request, so any check for RQ_INACTIVE in a driver is a bug and indicates use-after-free. So kill/clean the remaining users, straight forward. Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 30 9月, 2006 1 次提交
-
-
由 Jeff Dike 提交于
Close two file descriptor leaks, one in the ubd driver and one to /proc/mounts. The ubd driver bug also leaked some vmalloc space. The /proc/mounts leak was a descriptor that was just never closed. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 7月, 2006 1 次提交
-
-
由 Jeff Dike 提交于
The dedevfsification of UML left an unused variable behind. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 5 次提交
-
-
由 Greg Kroah-Hartman 提交于
And remove the now unneeded number field. Also fixes all drivers that set these fields. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Also fixes up all files that #include it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Removes the devfs_mk_symlink() function and all callers of it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Removes the devfs_mk_dir() function and all callers of it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andreas Mohr 提交于
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 01 4月, 2006 1 次提交
-
-
由 Jeff Dike 提交于
A number of UML initcalls were improperly returning 1. Also removed any nearby emacs formatting comments. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 3月, 2006 1 次提交
-
-
由 Jeff Dike 提交于
This adds a 'c' option to the ubd switch which turns off host file locking so that the device can be shared, as with a cluster. There's also some whitespace cleanup while I was in this file. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 2月, 2006 1 次提交
-
-
Improve (especially for coherence) some prototypes, and return code of init_cow_file in error case - for a short write return -EINVAL, otherwise return the error we got! Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 19 1月, 2006 2 次提交
-
-
Correct a bit of whitespace problems while working here. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
When the user specifies both a COW file and its backing file, if the previous backing file is not found, currently UML tries again to use it and fails. This can be corrected by changing same_backing_files() return value in that case, so that the caller will try to change the COW file to point to the new location, as already done in other cases. Additionally, given the change in the meaning of the func, change its name, invert its return value, so all values are inverted except when stat(from_cow,&buf2) fails. And add some comments and two minor bugfixes - remove a fd leak (return err rather than goto out) and a repeated check. Tested well. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Jeff Dike 提交于
The HDIO_GETGEO patch left an unused variable in the UML block driver. This gets rid of it. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 1月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
HDIO_GETGEO is implemented in most block drivers, and all of them have to duplicate the code to copy the structure to userspace, as well as getting the start sector. This patch moves that to common code [1] and adds a ->getgeo method to fill out the raw kernel hd_geometry structure. For many drivers this means ->ioctl can go away now. [1] the s390 block drivers are odd in this respect. xpram sets ->start to 4 always which seems more than odd, and the dasd driver shifts the start offset around, probably because of it's non-standard sector size. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@suse.de> Cc: <mike.miller@hp.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 2 次提交
-
-
由 Jeff Dike 提交于
There are a few functions which are declared to return something, but don't. These are actually infinite loops which are forced to be declared as non-void. This makes them all return 0. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
There were a bunch of calls to uml_strdup dating from before kstrdup was introduced. This changes those calls. It doesn't eliminate the definition since there is still a couple of calls in userspace code (which should probably call the libc strdup). Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 11月, 2005 1 次提交
-
-
由 Russell King 提交于
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 10月, 2005 1 次提交
-
-
由 Russell King 提交于
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 10月, 2005 1 次提交
-
-
由 Jeff Dike 提交于
The patch to use host AIO support that I submitted early after 2.6.13 exposed some problems in the block driver. I have fixes for these, but am not comfortable putting them into 2.6.14 at this late date. So, this patch reverts the use of host AIO. I will resubmit the original patch, plus fixes to the driver after 2.6.14 in order to get a reasonable amount of testing before they're exposed to the general public. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 9月, 2005 2 次提交
-
-
由 Jeff Dike 提交于
This adds AIO support to the ubd driver. The driver breaks a struct request into IO requests to the host, based on the hardware segments in the request and on any COW blocks covered by the request. The ubd IO thread is gone, since there is now an equivalent thread in the AIO module. There is provision for multiple outstanding requests now. Requests aren't retired until all pieces of it have been completed. The AIO requests have a shared count, which is decremented as IO operations come in until it reaches 0. This can be possibly moved to the request struct - haven't looked at this yet. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This cleans up the error path in ubd_open, causing it now to call ubd_close appropriately when something fails. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2005 1 次提交
-
-
由 Jeff Dike 提交于
Clean up the hot-unplugging code. There is now an id procedure which is called to figure out what device we're talking to. The error messages from that are now done from mconsole_remove instead of the driver. remove is now called with the device number, after it has been checked, so doesn't need to do sanity checking on it. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 5月, 2005 2 次提交
-
-
由 Jeff Dike 提交于
One of the ubd driver help strings was bust. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Remove old useless header that was used in Ye Olde Times during 2.4->2.5 porting to abstract differences. It's definitions are no more used anyway, so let's finally kill it. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 5月, 2005 1 次提交
-
-
由 Jeff Dike 提交于
Finally rip out the ubd-mmap code, which turned out to be broken by design. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 1 次提交
-
-
Use the set_disk_ro() API when the backing file is read-only, to mark the disk read-only, during the ->open(). The current hack does not work when doing a mount -o remount. Also, mark explicitly the code paths which should no more be triggerable (I've removed the WARN_ON(1) things). They should actually become BUG()s probably but I'll avoid that since I'm not so sure the change works so well. I gave it only some limited testing. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-