Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.

Add both Broadwell LPSS UART ports to the list of supported devices.
Signed-off-by: NLeif Liddy <leif.liddy@gmail.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In below commit alias DTE is set when its peripheral is
setting DTE. However there's a code bug here to wrongly
set the alias DTE, correct it in this patch.

commit e25bfb56
Author: Joerg Roedel <jroedel@suse.de>
Date:   Tue Oct 20 17:33:38 2015 +0200

    iommu/amd: Set alias DTE in do_attach/do_detach
Signed-off-by: NBaoquan He <bhe@redhat.com>
Tested-by: NMark Hounschell <markh@compro.net>
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Fix a simple typo when disabling IOTLB on PCI(e) devices.

Fixes: b16d0cb9 ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS")
Cc: stable@vger.kernel.org  # v4.4
Signed-off-by: NJeremy McNicoll <jmcnicol@redhat.com>
Reviewed-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The rework of the driver missed to move the call to set_handle_irq() into
asm9260_of_init(). As a consequence no interrupt entry point is installed and
no interrupts are delivered

Solution is simple: Install the interrupt entry handler.

Fixes: 7e4ac676 ("irqchip/mxs: Add Alphascale ASM9260 support")
Signed-off-by: NOleksij Rempel <linux@rempel-privat.de>
Cc: kernel@pengutronix.de
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Trying to build a kernel for ARC with both options CONFIG_COMPILE_TEST
and CONFIG_IOMMU_IO_PGTABLE_LPAE enabled (e.g. as a result of "make
allyesconfig") results in the following build failure:

 | CC drivers/iommu/io-pgtable-arm.o
 | linux/drivers/iommu/io-pgtable-arm.c: In
 | function ‘__arm_lpae_alloc_pages’:
 | linux/drivers/iommu/io-pgtable-arm.c:221:3:
 | error: implicit declaration of function ‘dma_map_single’
 | [-Werror=implicit-function-declaration]
 | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE);
 | ^
 | linux/drivers/iommu/io-pgtable-arm.c:221:42:
 | error: ‘DMA_TO_DEVICE’ undeclared (first use in this function)
 | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE);
 | ^

Since IOMMU_IO_PGTABLE_LPAE depends on DMA API, io-pgtable-arm.c should
include linux/dma-mapping.h. This fixes the reported failure.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: NLada Trimasova <ltrimas@synopsys.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The I2C bus names are supposed to be stable as they can be used by
userspace to uniquely identify a specific I2C bus. So restore the
original names for all legacy (pre-SB800) devices.

For SB800 devices and later, improve the names. "SDA" refers to the
serial data pin of each SMBus port, it's an implementation detail the
user doesn't need to know. Use "port" instead, which is easier to
understand.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NChristian Fetzer <fetzer.ch@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Previously, speakup would always read the non-scrolled part of the VT,
even when the VT is scrolled back with shift-page.  This patch makes
vt.c export screen_pos so that speakup can use it to properly access
the content of the scrolled-back VT.

This was tested with both vgacon and fbcon.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit f79b0d9c ("staging: speakup: Fixed warning <linux/serial.h>
instead of <asm/serial.h>") broke the port information in the speakup
driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included,
and no other header includes asm/serial.h.

We here make sure serialio.c does get the arch-specific definition of
SERIAL_PORT_DFNS from asm/serial.h, if any.

Along the way, this makes sure that we do have information for the
requested serial port number (index)

Fixes: f79b0d9c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>")
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Cc: stable <stable@vger.kernel.org> # 3.18
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit ebd43516.

We should not be sleeping inside spin_lock.

Fixes: ebd43516 ("Staging: panel: usleep_range is preferred over udelay")
Cc: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Reported-by: NHuang, Ying <ying.huang@intel.com>
Tested-by: NHuang, Ying <ying.huang@intel.com>
Cc: stable <stable@vger.kernel.org> # 4.4
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>.
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes a race condition in the error case: since the pt bos have not
necessarily been reserved in case of an error, we could move a pt bo that
is currently in the middle of being evicted/moved by another process,
which then resulted in a BUG_ON in ttm_bo_add_to_lru.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add bit masking to read ApmTdpLimit precisely
Signed-off-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

gcc warns quite a bit about values returned from allocate_resources()
in cpufreq-dt.c:

cpufreq-dt.c: In function 'cpufreq_init':
cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here
cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here
cpufreq-dt.c: In function 'dt_cpufreq_probe':
cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here

The problem is that it's slightly hard for gcc to follow return
codes across PTR_ERR() calls.

This patch uses explicit assignments to the "ret" variable to make
it easier for gcc to verify that the code is actually correct,
without the need to add a bogus initialization.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There are two definitions of pxa_cpufreq_change_voltage, with slightly
different prototypes after one of them had its argument marked 'const'.
Now the other one (for !CONFIG_REGULATOR) produces a harmless warning:

drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target':
drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
   ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
                                    ^
drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *'
 static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq)
            ^

This changes the prototype in the same way as the other, which
avoids the warning.

Fixes: 03c22990 (cpufreq: pxa: make pxa_freqs arrays const)
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 4.2+ <stable@vger.kernel.org> # 4.2+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently next_policy() explicitly checks if a policy is the last
policy in the cpufreq_policy_list. Use the standard list_is_last
primitive instead.
Signed-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There is a race discovered by Juri, where we are able to:
- create and read a sysfs file before policy->governor_data is being set
  to a non NULL value.
  OR
- set policy->governor_data to NULL, and reading a file before being
  destroyed.

And so such a crash is reported:

Unable to handle kernel NULL pointer dereference at virtual address 0000000c
pgd = edfc8000
[0000000c] *pgd=bfc8c835
Internal error: Oops: 17 [#1] SMP ARM
Modules linked in:
CPU: 4 PID: 1730 Comm: cat Not tainted 4.5.0-rc1+ #463
Hardware name: ARM-Versatile Express
task: ee8e8480 ti: ee930000 task.ti: ee930000
PC is at show_ignore_nice_load_gov_pol+0x24/0x34
LR is at show+0x4c/0x60
pc : [<c058f1bc>]    lr : [<c058ae88>]    psr: a0070013
sp : ee931dd0  ip : ee931de0  fp : ee931ddc
r10: ee4bc290  r9 : 00001000  r8 : ef2cb000
r7 : ee4bc200  r6 : ef2cb000  r5 : c0af57b0  r4 : ee4bc2e0
r3 : 00000000  r2 : 00000000  r1 : c0928df4  r0 : ef2cb000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: adfc806a  DAC: 00000051
Process cat (pid: 1730, stack limit = 0xee930210)
Stack: (0xee931dd0 to 0xee932000)
1dc0:                                     ee931dfc ee931de0 c058ae88 c058f1a4
1de0: edce3bc0 c07bfca4 edce3ac0 00001000 ee931e24 ee931e00 c01fcb90 c058ae48
1e00: 00000001 edce3bc0 00000000 00000001 ee931e50 ee8ff480 ee931e34 ee931e28
1e20: c01fb33c c01fcb0c ee931e8c ee931e38 c01a5210 c01fb314 ee931e9c ee931e48
1e40: 00000000 edce3bf0 befe4a00 ee931f78 00000000 00000000 000001e4 00000000
1e60: c00545a8 edce3ac0 00001000 00001000 befe4a00 ee931f78 00000000 00001000
1e80: ee931ed4 ee931e90 c01fbed8 c01a5038 ed085a58 00020000 00000000 00000000
1ea0: c0ad72e4 ee931f78 ee8ff488 ee8ff480 c077f3fc 00001000 befe4a00 ee931f78
1ec0: 00000000 00001000 ee931f44 ee931ed8 c017c328 c01fbdc4 00001000 00000000
1ee0: ee8ff480 00001000 ee931f44 ee931ef8 c017c65c c03deb10 ee931fac ee931f08
1f00: c0009270 c001f290 c0a8d968 ef2cb000 ef2cb000 ee8ff480 00000020 ee8ff480
1f20: ee8ff480 befe4a00 00001000 ee931f78 00000000 00000000 ee931f74 ee931f48
1f40: c017d1ec c017c2f8 c019c724 c019c684 ee8ff480 ee8ff480 00001000 befe4a00
1f60: 00000000 00000000 ee931fa4 ee931f78 c017d2a8 c017d160 00000000 00000000
1f80: 000a9f20 00001000 befe4a00 00000003 c000ffe4 ee930000 00000000 ee931fa8
1fa0: c000fe40 c017d264 000a9f20 00001000 00000003 befe4a00 00001000 00000000
Unable to handle kernel NULL pointer dereference at virtual address 0000000c
1fc0: 000a9f20 00001000 befe4a00 00000003 00000000 00000000 00000003 00000001
pgd = edfc4000
[0000000c] *pgd=bfcac835
1fe0: 00000000 befe49dc 000197f8 b6e35dfc 60070010 00000003 3065b49d 134ac2c9

[<c058f1bc>] (show_ignore_nice_load_gov_pol) from [<c058ae88>] (show+0x4c/0x60)
[<c058ae88>] (show) from [<c01fcb90>] (sysfs_kf_seq_show+0x90/0xfc)
[<c01fcb90>] (sysfs_kf_seq_show) from [<c01fb33c>] (kernfs_seq_show+0x34/0x38)
[<c01fb33c>] (kernfs_seq_show) from [<c01a5210>] (seq_read+0x1e4/0x4e4)
[<c01a5210>] (seq_read) from [<c01fbed8>] (kernfs_fop_read+0x120/0x1a0)
[<c01fbed8>] (kernfs_fop_read) from [<c017c328>] (__vfs_read+0x3c/0xe0)
[<c017c328>] (__vfs_read) from [<c017d1ec>] (vfs_read+0x98/0x104)
[<c017d1ec>] (vfs_read) from [<c017d2a8>] (SyS_read+0x50/0x90)
[<c017d2a8>] (SyS_read) from [<c000fe40>] (ret_fast_syscall+0x0/0x1c)
Code: e5903044 e1a00001 e3081df4 e34c1092 (e593300c)
---[ end trace 5994b9a5111f35ee ]---

Fix that by making sure, policy->governor_data is updated at the right
places only.

Cc: 4.2+ <stable@vger.kernel.org> # 4.2+
Reported-and-tested-by: NJuri Lelli <juri.lelli@arm.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This was found with the -RT patch enabled, but the fix should apply to
non-RT also.

Used multi_v7_defconfig+PREEMPT_RT_FULL=y and this caused a compilation
warning without this fix:
../drivers/cpuidle/coupled.c:122:21: warning: 'cpuidle_coupled_lock'
defined but not used [-Wunused-variable]
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Acked-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We must preserve the same order of how we acquire and release the lock for
genpd, as otherwise we may encounter deadlocks.

The power on phase of a genpd starts by acquiring its lock. Then it walks
the hierarchy of its parent domains to be able to power on these first, as
per design of genpd.

From a locking perspective this means the locks of the parents becomes
acquired after the lock of the subdomain.

Let's fix pm_genpd_add|remove_subdomain() to maintain the same order of
acquiring/releasing the genpd lock as being applied in the power on/off
sequence.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Using iommu_present() to determine whether an IOMMU group is real or
fake has some problems.  First, apparently Power systems don't
register an IOMMU on the device bus, so the groups and containers get
marked as noiommu and then won't bind to their actual IOMMU driver.
Second, I expect we'll run into the same issue as we try to support
vGPUs through vfio, since they're likely to emulate this behavior of
creating an IOMMU group on a virtual device and then providing a vfio
IOMMU backend tailored to the sort of isolation they provide, which
won't necessarily be fully compatible with the IOMMU API.

The solution here is to use the existing iommudata interface to IOMMU
groups, which allows us to easily identify the fake groups we've
created for noiommu purposes.  The iommudata we set is purely
arbitrary since we're only comparing the address, so we use the
address of the noiommu switch itself.
Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: NAnatoly Burakov <anatoly.burakov@intel.com>
Tested-by: NSantosh Shukla <sshukla@mvista.com>
Fixes: 03a76b60 ("vfio: Include No-IOMMU mode")
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Properly setup the DFS divider for DP audio for DCE4.1.
Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Move encoding of DFS (digital frequency synthesizer) divider into a
separate function and improve calculation precision.
Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This is preparation for the fixes in the following patches.
Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Fix firmware init on Stoney when powerplay is enabled.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The cleancache_ops structure is never modified, so declare it as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Atmel AIC has common structure for SMR (Source Mode Register).

  bit[6:5] Interrupt source type
  bit[2:0] Priority level
  Other bits are unused.

To update new priority value, bit[2:0] should be cleared first and then
new priority level can be written. However, aic_common_set_priority()
helper clears source type bits instead of priority bits.
This patch fixes wrong mask bit operation.

Fixes: b1479ebb "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers"
Signed-off-by: NMilo Kim <milo.kim@ti.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Nicholas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org #v3.17+
Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

As the function documentation for tty_ldisc_ref_wait() notes, it is
only callable from a tty file_operations routine; otherwise there
is no guarantee the ref won't be NULL.

The key difference with the VT's paste_selection() is that is an ioctl,
where __speakup_paste_selection() is completely async kworker, kicked
off from interrupt context.

Fixes: 28a821c3 ("Staging: speakup: Update __speakup_paste_selection()
       tty (ab)usage to match vt")
Cc: <stable@vger.kernel.org>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Although n_tty_check_unthrottle() has a valid ldisc reference (since
the tty core gets the ldisc ref in tty_read() before calling the line
discipline read() method), it does not have a valid ldisc reference to
the "other" pty of a pty pair. Since getting an ldisc reference for
tty->link essentially open-codes tty_wakeup(), just replace with the
equivalent tty_wakeup().

Cc: <stable@vger.kernel.org>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ioctl(TIOCGETD) retrieves the line discipline id directly from the
ldisc because the line discipline id (c_line) in termios is untrustworthy;
userspace may have set termios via ioctl(TCSETS*) without actually
changing the line discipline via ioctl(TIOCSETD).

However, directly accessing the current ldisc via tty->ldisc is
unsafe; the ldisc ptr dereferenced may be stale if the line discipline
is changing via ioctl(TIOCSETD) or hangup.

Wait for the line discipline reference (just like read() or write())
to retrieve the "current" line discipline id.

Cc: <stable@vger.kernel.org>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A small window exists where a tty reopen will observe the tty
just prior to imminent teardown (tty->count == 0); in this case, open()
returns EIO to userspace.

Instead, retry the open after checking for signals and yielding;
this interruptible retry loop allows teardown to commence and initialize
a new tty on retry. Never retry the BSD master pty reopen; there is no
guarantee the pty pair teardown is imminent since the slave file
descriptors may remain open indefinitely.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org> # 4.4
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow a signal to interrupt the wait for a tty reopen; eg., if
the tty has starting final close and is waiting for the device to
drain.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org> # 4.4
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Runtime suspend during driver probe and removal can cause problems.
The driver's runtime_suspend or runtime_resume callbacks may invoked
before the driver has finished binding to the device or after the
driver has unbound from the device.

This problem shows up with the sd and sr drivers, and can cause disk
or CD/DVD drives to become unusable as a result.  The fix is simple.
The drivers store a pointer to the scsi_disk or scsi_cd structure as
their private device data when probing is finished, so we simply have
to be sure to clear the private data during removal and test it during
runtime suspend/resume.

This fixes <https://bugs.debian.org/801925>.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NPaul Menzel <paul.menzel@giantmonkey.de>
Reported-by: NErich Schubert <erich@debian.org>
Reported-by: NAlexandre Rossi <alexandre.rossi@gmail.com>
Tested-by: NPaul Menzel <paul.menzel@giantmonkey.de>
Tested-by: NErich Schubert <erich@debian.org>
CC: <stable@vger.kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

When trying to get the vmap address of an imported buffer, we must
call into the appropriate helper function, to allow the exporter to
establish the vmap, instead of trying to vmap the buffer on our own.

Add an indirection through etnaviv_gem_ops to allow the correct
implementation to be called.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

This function follows the semantics of vmap() by returning
NULL in case of an error. To make things less confusing
rename it to make make both functions more closely related.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

In case that etnaviv_gem_get_pages is unable to get the required
pages the object mutex needs to be unlocked. Also return NULL in
this case instead of propagating the error, as callers of this
function might not be prepared to handle a pointer error, but
expect this call to follow the semantics of a plain vmap to return
NULL in case of an error.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

Plug in error handling to free any allocated ressources in the
IOMMU init path.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

Export further minor feature bitmasks and the varyings count from
the GPU specifications registers to userspace.
Acked-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

Add and use a helper for comparing the model and revision IDs.
Acked-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

Add a helper to extract etnaviv bitfields from register values.
Acked-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

Use the defined constants in common.xml.h for the chip model rather
than coding these as hex numbers.
Acked-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>