- 10 7月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 30 6月, 2006 1 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 28 6月, 2006 5 次提交
-
-
由 Bartlomiej Swiercz 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Andreas Mohr 提交于
While trying to look for superfluous I/O accesses that can be optimized away, I stumbled upon this ACPI sleep I/O access and couldn't figure out why the hell this dummy op was necessary. After more than one hour of internet research, I had collected a sufficient number of documents (among those very old kernel versions) that finally told me what this dummy read was about: STPCLK# doesn't get asserted in time on (some) chipsets, which is why we need to have a dummy I/O read to delay further instruction processing until the CPU is fully stopped. Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Dominik Brodowski 提交于
Only if bus master activity is going on at the present, we should avoid entering C3-type sleep, as it might be a faulty transition. As long as the bm_activity bitmask was based on the number of calls to the ACPI idle function, looking at previous moments made sense. Now, with it being based on what happened this jiffy, looking at this jiffy should be sufficient. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Dominik Brodowski 提交于
Do not assume there was bus mastering activity if the idle handler didn't get called, as there's only reason to not enter C3-type sleep if there is bus master activity going on. Only for the "promotion" into C3-type sleep bus mastering activity is taken into account, and there only current bus mastering activity, and not pure guessing should lead to the decision on whether to enter C3-type sleep or not. Also, as bm_activity is a jiffy-based bitmask (bit 0: bus mastering activity during this juffy, bit 31: bus mastering activity 31 jiffies ago), fix the setting of bit 0, as it might be called multiple times within one jiffy. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Dominik Brodowski 提交于
Track the actual time spent in C-States (C2 upwards, we can't determine this for C1), not only the number of invocations. This is especially useful for dynamic ticks / "tickless systems", but is also of interest on normal systems, as any interrupt activity leads to C-States being exited, not only the timer interrupt. The time is being measured in PM timer ticks, so an increase by one equals 279 nanoseconds. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 27 6月, 2006 5 次提交
-
-
由 Patrick Mochel 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Thomas Renninger 提交于
Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Andi Kleen 提交于
During some profiling I noticed that default_idle causes a lot of memory traffic. I think that is caused by the atomic operations to clear/set the polling flag in thread_info. There is actually no reason to make this atomic - only the idle thread does it to itself, other CPUs only read it. So I moved it into ti->status. Converted i386/x86-64/ia64 for now because that was the easiest way to fix ACPI which also manipulates these flags in its idle function. Cc: Nick Piggin <npiggin@novell.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
As part of the i386 conversion to the generic timekeeping infrastructure, this introduces a new tsc.c file. The code in this file replaces the TSC initialization, management and access code currently in timer_tsc.c (which will be removed) that we want to preserve. The code also introduces the following functionality: o tsc_khz: like cpu_khz but stores the TSC frequency on systems that do not change TSC frequency w/ CPU frequency o check/mark_tsc_unstable: accessor/modifier flag for TSC timekeeping usability o minor cleanups to calibration math. This patch also includes a one line __cpuinitdata fix from Zwane Mwaikambo. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 5月, 2006 1 次提交
-
-
由 Andreas Mohr 提交于
make pm_idle_save, nocst and bm_history __read_mostly remove initializer from static 'first_run'. Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 26 3月, 2006 2 次提交
-
-
由 Andi Kleen 提交于
Broken earlier by me by a x86-64 patch. The code was optimized away, but the compiler still complained about an undeclared function. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 2月, 2006 2 次提交
-
-
由 Ashok Raj 提交于
attached patch is 2 more cases i found via running the reference_init.pl script. These were easy to spot just knowing the file names. There is one another about init/main.c that i cant exactly zero in. (partly because i dont know how to interpret the data thats spewed out of the tool). Signed-off-by: NAshok Raj <ashok.raj@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Venkatesh Pallipadi 提交于
Bug in apic timer removal on C3 patch. We should switch to IPI from APIC timer only when C3 state is valid. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Venkatesh Pallipadi 提交于
Whenever we see that a CPU is capable of C3 (during ACPI cstate init), we disable local APIC timer and switch to using a broadcast from external timer interrupt (IRQ 0). This is needed because Intel CPUs stop the local APIC timer in C3. This is currently only enabled for Intel CPUs. Patch below adds the code for i386 and also the ACPI hunk. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 1 次提交
-
-
由 Thomas Rosner 提交于
This adds all known BIOS versions of IBM R40e Laptops to the C2/C3 processor state blacklist and thus prevents them from crashing. workaround for http://bugzilla.kernel.org/show_bug.cgi?id=3549Signed-off-by: NThomas Rosner <kernel-bugs@digital-trauma.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 06 12月, 2005 1 次提交
-
-
由 David Shaohua Li 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=5165 Change polarity of test for PLVL2_UP flag. Skip promotion/demotion code when not needed. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 03 12月, 2005 2 次提交
-
-
由 Linus Torvalds 提交于
Silly bug crept in with the C2/C3 TIF_POLLING_NRFLAG fixes. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Commit 64c7c8f8 broke the ACPI C2 and C3 sleep states, because it left TIF_POLLING_NRFLAG active even though those states do not actually poll the reschedule flag at all. As a result, the CPU wouldn't get sent an IPI when it was to be woken up, and would only notice that it had runnable processes on the next timer tick. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 12月, 2005 1 次提交
-
-
由 Janosch Machowinski 提交于
The ASUS M6Ne specifies C2, implying C1 but not explicitly specifying it. http://bugzilla.kernel.org/show_bug.cgi?id=4485Signed-off-by: NJanosch Machowinski <jmachowinski@gmx.de> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 01 12月, 2005 1 次提交
-
-
由 Venkatesh Pallipadi 提交于
Linux invokes the AML _PDC method (Processor Driver Capabilities) to tell the BIOS what features it can handle. While the ACPI spec says nothing about the OS invoking _PDC multiple times, doing so with changing bits seems to hopelessly confuse the BIOS on multiple platforms up to and including crashing the system. Factor out the _PDC invocation so Linux invokes it only once. http://bugzilla.kernel.org/show_bug.cgi?id=5483Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 30 11月, 2005 2 次提交
-
-
由 Venkatesh Pallipadi 提交于
which tells us if C2 is valid for UP-only, or SMP. As there is no separate bit for C3, use P_LVL2_UP bit to cover both C2 and C3. http://bugzilla.kernel.org/show_bug.cgi?id=5165 Signed-off-by: Venkatesh Pallipadi<venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> (cherry picked from 28b86b368af3944eb383078fc5797caf2dc8ce44 commit)
-
由 Venkatesh Pallipadi 提交于
Note: This ACPI standard compliance may cause regression on some system, if they have _CST present, but _CST value is bogus. "nocst" module parameter should workaround that regression. http://bugzilla.kernel.org/show_bug.cgi?id=5165 Signed-off-by: Venkatesh Pallipadi<venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> (cherry picked from 883baf7f7e81cca26f4683ae0d25ba48f094cc08 commit)
-
- 18 11月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Properly clear the memory, and set "pr->flags.power" only if a C2 or deeper state is valid (to make the code match both the comment and previous behaviour). This fixes a boot-time lockup reported by Maneesh Soni when using "maxcpus=1". Acked-by: NManeesh Soni <maneesh@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 1 次提交
-
-
由 Nick Piggin 提交于
Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 10月, 2005 1 次提交
-
-
由 Tim Schmielau 提交于
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 8月, 2005 1 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 03 8月, 2005 1 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 30 7月, 2005 4 次提交
-
-
由 Venkatesh Pallipadi 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=4401Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 David Shaohua Li 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=4763Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Venkatesh Pallipadi 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=4954Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Venkatesh Pallipadi 提交于
where C-states come from FADT. Thanks to Kevin Radloff for identifying the issue and isolating it to exact line of code that is causing the issue. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 12 7月, 2005 2 次提交
-
-
由 Venkatesh Pallipadi 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=4401Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Venkatesh Pallipadi 提交于
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 22 6月, 2005 1 次提交
-
-
由 Ingo Molnar 提交于
This patch implements a number of smp_processor_id() cleanup ideas that Arjan van de Ven and I came up with. The previous __smp_processor_id/_smp_processor_id/smp_processor_id API spaghetti was hard to follow both on the implementational and on the usage side. Some of the complexity arose from picking wrong names, some of the complexity comes from the fact that not all architectures defined __smp_processor_id. In the new code, there are two externally visible symbols: - smp_processor_id(): debug variant. - raw_smp_processor_id(): nondebug variant. Replaces all existing uses of _smp_processor_id() and __smp_processor_id(). Defined by every SMP architecture in include/asm-*/smp.h. There is one new internal symbol, dependent on DEBUG_PREEMPT: - debug_smp_processor_id(): internal debug variant, mapped to smp_processor_id(). Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new lib/smp_processor_id.c file. All related comments got updated and/or clarified. I have build/boot tested the following 8 .config combinations on x86: {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT} I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT. (Other architectures are untested, but should work just fine.) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 1 次提交
-
-
由 Paul E. McKenney 提交于
This patch changes calls to synchronize_kernel(), deprecated in the earlier "Deprecate synchronize_kernel, GPL replacement" patch to instead call the new synchronize_rcu() and synchronize_sched() APIs. Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-