- 17 3月, 2009 25 次提交
-
-
由 Helmut Schaa 提交于
Use IE definitions from linux/ieee80211.h and drop the appropriate enum from ipw2x00/ieee80211.h Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Remove several duplicated defines from ipw2x00/ieee80211.h which are also available in linux/ieee80211.h. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Replace all remaining occurrences of CONFIG_IEEE80211_DEBUG with CONFIG_LIBIPW_DEBUG in libipw to allow debug output again. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
ath_radio_{en,dis}able is only compiled if RFKILL is enabled, but it is required by the 'ath9k_wiphy_select' function. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
drivers/net/wireless/ath9k/debug.c: In function 'read_file_wiphy': drivers/net/wireless/ath9k/debug.c:377: error: implicit declaration of function 'put_unaligned_le32' drivers/net/wireless/ath9k/debug.c:378: error: implicit declaration of function 'put_unaligned_le16' Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
drivers/net/wireless/ath9k/ahb.c: In function 'ath_ahb_probe': drivers/net/wireless/ath9k/ahb.c:136: error: 'aphy' undeclared (first use in this function) Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
The current macro is wrong, because detects some AR5416 devices as an AR9100 device. The AR5416 devices would have performance issues after this change, because the contents of the ar5416 specific and of the ar9100 specificinitval arrays are swapped. Fortunately we can correct this with the rename of the arrays simply. Changes-licesed-under: ISC Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
All other version checking macros are in a common location within the reg.h file. The AR_SREV_9100_OR_LATER macro is wrong currently, but will be fixed with the next patch. Changes-licensed-under: ISC Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
Currently we have two different versions of this macros. Because they would have to do the same thing, we should simplify and merge them. Changes-licensed-under: ISC Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Senthil Balasubramanian 提交于
Fix AR9285 1.1 and 1.2 version check macro. Signed-off-by: NSenthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Senthil Balasubramanian 提交于
This patch updates the initvalues for AR9285 chipset and also adds periodic PA offset caliberation. Signed-off-by: NSenthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Senthil Balasubramanian 提交于
accessing RXBUF list in ath_rx_cleanup may cause panic if ath_descdma_setup fails even before RXBUF list is initialized. Signed-off-by: NSenthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Senthil Balasubramanian 提交于
We can sleep for memory during init time and so allocating rx buffers, descriptro buffers with GFP_KERNEL should help us to get rid of transient alloc fails. Signed-off-by: NSenthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This is the lowest value amongst countries which do enable 5 GHz operation. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
ACME Inc. is now selling a dual band radio. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch enables power save support on all p54 devices. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch adds SoftLED support for all p54 devices. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Disabling the receiver logic with P54_FILTER_TYPE_RX_DISABLED is not supported by all firmwares. However we have an alternative: hibernation. And the only side effect - so far - is a bit less power consumption. WIN! Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch replaces most printk(KERN_* "") with their by dev_* analogue. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
All three drivers (p54pci, p54usb and p54spi) are implementing the same functionality three times. So, why not put it into the shared library?! Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
The patch fixes a problem when the (Soft)LED stayed on after the module was unloaded. It turned out that the USB core disables all endpoints before calling the disconnect method. So it was impossible to switch off the radio & LEDs. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
The driver are trying to create an 'ath9k' directory in debugfs for each device currently. If there are more than one device in the system, the second try will always fail. Changes-licensed-under: ISC Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Incorrect local->wmm_acm bits were set for AC_BK and AC_BE. Fix this and add some comments to make it easier to understand the AC-to-UP(pair) mapping. Set the wmm_acm bits (and show WMM debug) even if the driver does not implement conf_tx() handler. In addition, fix the ACM-based AC downgrade code to not use the highest priority in error cases. We need to break the loop to get the correct AC_BK value (3) instead of returning 0 (which would indicate AC_VO). The comment here was not really very useful either, so let's provide somewhat more helpful description of the situation. Since it is very unlikely that the ACM flag would be set for AC_BK and AC_BE, these bugs are not likely to be seen in real life networks. Anyway, better do these things correctly should someone really use silly AP configuration (and to pass some functionality tests, too). Remove the TODO comment about handling ACM. Downgrading AC is perfectly valid mechanism for ACM. Eventually, we may add support for WMM-AC and send a request for a TS, but anyway, that functionality won't be here at the location of this TODO comment. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Borzenkov 提交于
Currently part of support for FW caching is unconditionally compiled in even if it is never used. Consistently remove caching support if not requested by user. Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 3月, 2009 9 次提交
-
-
由 Ilpo Järvinen 提交于
It's not too likely to happen, would basically require crafted packets (must hit the max guard in tcp_bound_to_half_wnd()). It seems that nothing that bad would happen as there's tcp_mems and congestion window that prevent runaway at some point from hurting all too much (I'm not that sure what all those zero sized segments we would generate do though in write queue). Preventing it regardless is certainly the best way to go. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
The results is very unlikely change every so often so we hardly need to divide again after doing that once for a connection. Yet, if divide still becomes necessary we detect that and do the right thing and again settle for non-divide state. Takes the u16 space which was previously taken by the plain xmit_size_goal. This should take care part of the tso vs non-tso difference we found earlier. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
There's very little need for most of the callsites to get tp->xmit_goal_size updated. That will cost us divide as is, so slice the function in two. Also, the only users of the tp->xmit_goal_size are directly behind tcp_current_mss(), so there's no need to store that variable into tcp_sock at all! The drop of xmit_goal_size currently leaves 16-bit hole and some reorganization would again be necessary to change that (but I'm aiming to fill that hole with u16 xmit_goal_size_segs to cache the results of the remaining divide to get that tso on regression). Bring xmit_goal_size parts into tcp.c Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It seems that no variables clash such that we couldn't do the check just once later on. Therefore move it. Also kill dead obvious comment, dead argument and add unlikely since this mtu probe does not happen too often. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Wow, it was quite tricky to merge that stream of negations but I think I finally got it right: check & replace_ts_recent: (s32)(rcv_tsval - ts_recent) >= 0 => 0 (s32)(ts_recent - rcv_tsval) <= 0 => 0 discard: (s32)(ts_recent - rcv_tsval) > TCP_PAWS_WINDOW => 1 (s32)(ts_recent - rcv_tsval) <= TCP_PAWS_WINDOW => 0 I toggled the return values of tcp_paws_check around since the old encoding added yet-another negation making tracking of truth-values really complicated. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
I've already forgotten what for this was necessary, anyway it's no longer used (if it ever was). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
In the pure assignment case, the earlier zeroing is still in effect. David S. Miller raised concerns if the ifs are there to avoid dirtying cachelines. I came to these conclusions: > We'll be dirty it anyway (now that I check), the first "real" statement > in tcp_rcv_established is: > > tp->rx_opt.saw_tstamp = 0; > > ...that'll land on the same dword. :-/ > > I suppose the blocks are there just because they had more complexity > inside when they had to calculate the eff_sacks too (maybe it would > have been better to just remove them in that drop-patch so you would > have had less head-ache :-)). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
While looking for a possible reason of bugzilla report on HTB oops: http://bugzilla.kernel.org/show_bug.cgi?id=12858 I found the code in htb_delete calling htb_destroy_class on zero refcount is very misleading: it can suggest this is a common path, and destroy is called under sch_tree_lock. Actually, this can never happen like this because before deletion cops->get() is done, and after delete a class is still used by tclass_notify. The class destroy is always called from cops->put(), so without sch_tree_lock. This doesn't mean much now (since 2.6.27) because all vulnerable calls were moved from htb_destroy_class to htb_delete, but there was a bug in older kernels. The same change is done for other classful scheds, which, it seems, didn't have similar locking problems here. Reported-by: Nm0sia <m0sia@m0sia.ru> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
On x86_64, its rather unfortunate that "wait_queue_head_t wait" field of "struct socket" spans two cache lines (assuming a 64 bytes cache line in current cpus) offsetof(struct socket, wait)=0x30 sizeof(wait_queue_head_t)=0x18 This might explain why Kenny Chang noticed that his multicast workload was performing bad with 64 bit kernels, since more cache lines ping pongs were involved. This litle patch moves "wait" field next "fasync_list" so that both fields share a single cache line, to speedup sock_def_readable() Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2009 6 次提交
-
-
由 Dhananjay Phadke 提交于
To mark all features and bugfixes submitted since 4.0.11. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
This patch enables the load balancing capability of firmware and hardware to spray traffic into different cpus through separate rx msix interrupts. The feature is being enabled for NX3031, NX2031 (old) will be enabled later. This depends on msi-x and compatibility with msi and legacy is maintained by enabling single rx ring. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
o remove max_ prefix from ring sizes, since they don't really represent max possible sizes. o cleanup naming of rx ring types (normal, jumbo, lro). o simplify logic to choose rx ring size, gig ports get half rx ring of 10 gig ports. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Detach network interface on PCI suspend and recreate hardware context after resumes. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-