When writing a new file with 2048 bytes buffer, such as write(fd, buffer,
2048), it will call generic_perform_write() twice for every page:

	write_begin
	mark_page_accessed(page)
	write_end

	write_begin
	mark_page_accessed(page)
	write_end

Pages 1-13 will be added to lru-pvecs in write_begin() and will *NOT* be
added to active_list even they have be accessed twice because they are not
PageLRU(page).  But when page 14th comes, all pages in lru-pvecs will be
moved to inactive_list (by __lru_cache_add() ) in first write_begin(), now
page 14th *is* PageLRU(page).  And after second write_end() only page 14th
will be in active_list.

In Hadoop environment, we do comes to this situation: after writing a
file, we find out that only 14th, 28th, 42th...  page are in active_list
and others in inactive_list.  Now kswapd works, shrinks the inactive_list,
the file only have 14th, 28th...pages in memory, the readahead request
size will be broken to only 52k (13*4k), system's performance falls
dramatically.

This problem can also replay by below steps (the machine has 8G memory):

	1. dd if=/dev/zero of=/test/file.out bs=1024 count=1048576
	2. cat another 7.5G file to /dev/null
	3. vmtouch -m 1G -v /test/file.out, it will show:

	/test/file.out
	[oooooooooooooooooooOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO] 187847/262144

	the 'o' means same pages are in memory but same are not.

The solution for this problem is simple: the 14th page should be added to
lru_add_pvecs before mark_page_accessed() just as other pages.

[akpm@linux-foundation.org: tweak comment]
[akpm@linux-foundation.org: grab better comment from the v3 patch]
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:

 | effect                 | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump      | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock           | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP

This patch removes reserved_vm counter from mm_struct.  Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.

Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.

remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.

[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename VM_NODUMP into VM_DONTDUMP: this name matches other negative flags:
VM_DONTEXPAND, VM_DONTCOPY.  Currently this flag used only for
sys_madvise.  The next patch will use it for replacing the outdated flag
VM_RESERVED.

Also forbid madvise(MADV_DODUMP) for special kernel mappings VM_SPECIAL
(VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP)
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the kernel sets mm->exe_file during sys_execve() and then tracks
number of vmas with VM_EXECUTABLE flag in mm->num_exe_file_vmas, as soon
as this counter drops to zero kernel resets mm->exe_file to NULL.  Plus it
resets mm->exe_file at last mmput() when mm->mm_users drops to zero.

VMA with VM_EXECUTABLE flag appears after mapping file with flag
MAP_EXECUTABLE, such vmas can appears only at sys_execve() or after vma
splitting, because sys_mmap ignores this flag.  Usually binfmt module sets
mm->exe_file and mmaps executable vmas with this file, they hold
mm->exe_file while task is running.

comment from v2.6.25-6245-g925d1c40 ("procfs task exe symlink"),
where all this stuff was introduced:

> The kernel implements readlink of /proc/pid/exe by getting the file from
> the first executable VMA.  Then the path to the file is reconstructed and
> reported as the result.
>
> Because of the VMA walk the code is slightly different on nommu systems.
> This patch avoids separate /proc/pid/exe code on nommu systems.  Instead of
> walking the VMAs to find the first executable file-backed VMA we store a
> reference to the exec'd file in the mm_struct.
>
> That reference would prevent the filesystem holding the executable file
> from being unmounted even after unmapping the VMAs.  So we track the number
> of VM_EXECUTABLE VMAs and drop the new reference when the last one is
> unmapped.  This avoids pinning the mounted filesystem.

exe_file's vma accounting is hooked into every file mmap/unmmap and vma
split/merge just to fix some hypothetical pinning fs from umounting by mm,
which already unmapped all its executable files, but still alive.

Seems like currently nobody depends on this behaviour.  We can try to
remove this logic and keep mm->exe_file until final mmput().

mm->exe_file is still protected with mm->mmap_sem, because we want to
change it via new sys_prctl(PR_SET_MM_EXE_FILE).  Also via this syscall
task can change its mm->exe_file and unpin mountpoint explicitly.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some security modules and oprofile still uses VM_EXECUTABLE for retrieving
a task's executable file.  After this patch they will use mm->exe_file
directly.  mm->exe_file is protected with mm->mmap_sem, so locking stays
the same.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>			[arch/tile]
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>	[tomoyo]
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: NJames Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().

Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>	#arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge VM_INSERTPAGE into VM_MIXEDMAP.  VM_MIXEDMAP VMA can mix pure-pfn
ptes, special ptes and normal ptes.

Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like
VM_PFNMAP.  If driver populates whole VMA at mmap() it probably not
expects page-faults.

This patch removes special check from vma_wants_writenotify() which
disables pages write tracking for VMA populated via vm_instert_page().
BDI below mapped file should not use dirty-accounting, moreover
do_wp_page() can handle this.

vm_insert_page() still marks vma after first usage.  Usually it is called
from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to
change vma->vm_flags.  Caller must set VM_MIXEDMAP at mmap time if it
wants to call this function from other places, for example from page-fault
handler.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Combine several arch-specific vma flags into one.

before patch:

        0x00000200      0x01000000      0x20000000      0x40000000
x86     VM_NOHUGEPAGE   VM_HUGEPAGE     -               VM_PAT
powerpc -               -               VM_SAO          -
parisc  VM_GROWSUP      -               -               -
ia64    VM_GROWSUP      -               -               -
nommu   -               VM_MAPPED_COPY  -               -
others  -               -               -               -

after patch:

        0x00000200      0x01000000      0x20000000      0x40000000
x86     -               VM_PAT          VM_HUGEPAGE     VM_NOHUGEPAGE
powerpc -               VM_SAO          -               -
parisc  -               VM_GROWSUP      -               -
ia64    -               VM_GROWSUP      -               -
nommu   -               VM_MAPPED_COPY  -               -
others  -               VM_ARCH_1       -               -

And voila! One completely free bit.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT.

We can toss mapping address from remap_pfn_range() into
track_pfn_vma_new(), and collect all PAT-related logic together in
arch/x86/.

This patch also restores orignal frustration-free is_cow_mapping() check
in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73a
("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3")

is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c,
because it already handled by VM_PFNMAP in VM_NO_THP bit-mask.

[suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()]
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With PAT enabled, vm_insert_pfn() looks up the existing pfn memory
attribute and uses it.  Expectation is that the driver reserves the
memory attributes for the pfn before calling vm_insert_pfn().

remap_pfn_range() (when called for the whole vma) will setup a new
attribute (based on the prot argument) for the specified pfn range.
This addresses the legacy usage which typically calls remap_pfn_range()
with a desired memory attribute.  For ranges smaller than the vma size
(which is typically not the case), remap_pfn_range() will use the
existing memory attribute for the pfn range.

Expose two different API's for these different behaviors.
track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn()
and track_pfn_remap() for the remap_pfn_range().

This cleanup also prepares the ground for the track/untrack pfn vma
routines to take over the ownership of setting PAT specific vm_flag in
the 'vma'.

[khlebnikov@openvz.org: Clear checks in track_pfn_remap()]
[akpm@linux-foundation.org: tweak a few comments]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'pfn' argument for track_pfn_vma_new() can be used for reserving the
attribute for the pfn range.  No need to depend on 'vm_pgoff'

Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is
non-zero or can use follow_phys() to get the starting value of the pfn
range.

Also the non zero 'size' argument can be used instead of recomputing it
from vma.

This cleanup also prepares the ground for the track/untrack pfn vma
routines to take over the ownership of setting PAT specific vm_flag in the
'vma'.

[khlebnikov@openvz.org: Clear pfn to paddr conversion]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When transparent huge pages were introduced, memory compaction and swap
storms were an issue, and the kernel had to be careful to not make THP
allocations cause pageout or compaction.

Now that we have working compaction deferral, kswapd is smart enough to
invoke compaction and the quadratic behaviour around isolate_free_pages
has been fixed, it should be safe to remove __GFP_NO_KSWAPD.

[minchan@kernel.org: Comment fix]
[mgorman@suse.de: Avoid direct reclaim for deferred compaction]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The synchronization between CPU hotplug readers and writers is achieved
by means of refcounting, safeguarded by the cpu_hotplug.lock.

get_online_cpus() increments the refcount, whereas put_online_cpus()
decrements it.  If we ever hit an imbalance between the two, we end up
compromising the guarantees of the hotplug synchronization i.e, for
example, an extra call to put_online_cpus() can end up allowing a
hotplug reader to execute concurrently with a hotplug writer.

So, add a WARN_ON() in put_online_cpus() to detect such cases where the
refcount can go negative, and also attempt to fix it up, so that we can
continue to run.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce SYSCTL_EXCEPTION_TRACE config option and selec it in the
architectures requiring support for the "exception-trace" debug_table
entry in kernel/sysctl.c.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce HAVE_DEBUG_BUGVERBOSE config option and select it in
corresponding architecture Kconfig files.  Architectures that already
select GENERIC_BUG don't need to select HAVE_DEBUG_BUGVERBOSE.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce HAVE_DEBUG_KMEMLEAK config option and select it in corresponding
architecture Kconfig files.  DEBUG_KMEMLEAK now only depends on
HAVE_DEBUG_KMEMLEAK.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce HAVE_UID16 config option and select it in corresponding
architecture Kconfig files.  UID16 now only depends on HAVE_UID16.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that I've an IA64 box on top of the other boxes (IBM with Calgary-X,
Intel VT-d, AMD Vi, and AMD GART - that can use SWIOTLB as fallback) I can
reliably do regression testing.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull sound updates from Takashi Iwai:
 "This contains pretty many small commits covering fairly large range of
  files in sound/ directory.  Partly because of additional API support
  and partly because of constantly developed ASoC and ARM stuff.

  Some highlights:

   - Introduced the helper function and documentation for exposing the
     channel map via control API, as discussed in Plumbers; most of PCI
     drivers are covered, will follow more drivers later

   - Most of drivers have been replaced with the new PM callbacks (if
     the bus is supported)

   - HD-audio controller got the support of runtime PM and the support
     of D3 clock-stop.  Also changing the power_save option in sysfs
     kicks off immediately to enable / disable the power-save mode.

   - Another significant code change in HD-audio is the rewrite of
     firmware loading code.  Other than that, most of changes in
     HD-audio are continued cleanups and standardization for the generic
     auto parser and bug fixes (HBR, device-specific fixups), in
     addition to the support of channel-map API.

   - Addition of ASoC bindings for the compressed API, used by the
     mid-x86 drivers.

   - Lots of cleanups and API refreshes for ASoC codec drivers and
     DaVinci.

   - Conversion of OMAP to dmaengine.

   - New machine driver for Wolfson Microelectronics Bells.

   - New CODEC driver for Wolfson Microelectronics WM0010.

   - Enhancements to the ux500 and wm2000 drivers

   - A new driver for DA9055 and the support for regulator bypass mode."

Fix up various arm soc header file reorg conflicts.

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits)
  ALSA: hda - Add new codec ALC283 ALC290 support
  ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls
  ALSA: hda - fix indices on boost volume on Conexant
  ALSA: aloop - add locking to timer access
  ALSA: hda - Fix hang caused by race during suspend.
  sound: Remove unnecessary semicolon
  ALSA: hda/realtek - Fix detection of ALC271X codec
  ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310
  ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event
  ALSA: hda - make a generic unsol event handler
  ASoC: codecs: Add DA9055 codec driver
  ASoC: eukrea-tlv320: Convert it to platform driver
  ALSA: ASoC: add DT bindings for CS4271
  ASoC: wm_hubs: Ensure volume updates are handled during class W startup
  ASoC: wm5110: Adding missing volume update bits
  ASoC: wm5110: Add OUT3R support
  ASoC: wm5110: Add AEC loopback support
  ASoC: wm5110: Rename EPOUT to HPOUT3
  ASoC: arizona: Add more clock rates
  ASoC: arizona: Add more DSP options for mixer input muxes
  ...

Change de_thread() to use KILLABLE rather than UNINTERRUPTIBLE while
waiting for other threads.  The only complication is that we should
clear ->group_exit_task and ->notify_count before we return, and we
should do this under tasklist_lock.  -EAGAIN is used to match the
initial signal_group_exit() check/return, it doesn't really matter.

This fixes the (unlikely) race with coredump.  de_thread() checks
signal_group_exit() before it starts to kill the subthreads, but this
can't help if another CLONE_VM (but non CLONE_THREAD) task starts the
coredumping after de_thread() unlocks ->siglock.  In this case the
killed sub-thread can block in exit_mm() waiting for coredump_finish(),
execing thread waits for that sub-thead, and the coredumping thread
waits for execing thread.  Deadlock.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull arm64 changes from Catalin Marinas:
 "arm64 fixes:
   - Use swiotlb_init() instead of swiotlb_init_with_default_size().
     The latter is now a static function (commit 74838b75 "swiotlb:
     add the late swiotlb initialization function with iotlb memory").
   - Enable interrupts before calling do_notify_resume().

  arm64 clean-up:
   - Use the generic implementation of compat_sys_sendfile() on arm64 as
     commit 8f9c0119 (introducing the function) has been merged."

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: Enable interrupts before calling do_notify_resume()
  arm64: Use the generic compat_sys_sendfile() implementation
  arm64: Call swiotlb_init() instead of swiotlb_init_with_default_size()

Pull sparc changes from David S Miller:
 "There is an attempt to fix a bad interaction between syscall tracing
  and force_successful_syscall() from Al Viro, but it needs to be redone
  as it introduced regressions and thus had to be reverted for now.

  Al is working on an updated version.

  But what we do have here are some significant bzero/memset
  improvements for Niagara-4.  An 8K page can be cleared in around 600
  cycles, because we essentially have a store that behaves like
  powerpc's dcbz that we can actually make real use of."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  Revert strace hiccups fix.
  sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy.
  sparc64: Fix strace hiccups when force_successful_syscall() triggers.
  sparc64: Rearrange thread info to cheaply clear syscall noerror state.

task_work_run() implementation had the side effect of enabling
interrupts. With commit ac3d0da8 (task_work: Make task_work_add()
lockless), interrupts are no longer enabled revealing the bug in the
arch code. This patch enables the interrupt explicitly before calling
do_notify_resume().
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The generic implementation of compat_sys_sendfile() has been introduced
by commit 8f9c0119. This patch removes the arm64 implementation in
favour of the generic one.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Following commit 74838b75 (swiotlb: add the late swiotlb initialization
function with iotlb memory) the swiotlb_init_with_default_size() is a
static function. This patch changes the arm64 code to call
swiotlb_init() instead and use the default size of 64MB. It is assumed
that AArch64 platforms have enough RAM to afford the pre-allocated
swiotlb memory. It also removes the #ifdef around this call since
CONFIG_SWIOTLB is always enabled.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Pull UBI fastmap changes from Artem Bityutskiy:
 "This pull request contains the UBI fastmap support implemented by
  Richard Weinberger from Linutronix.  Fastmap is designed to address
  UBI's slow scanning issues.  Namely, it introduces a new on-flash
  data-structure called "fastmap", which stores the information about
  logical<->physical eraseblocks mappings.  So now to get this
  information just read the fastmap, instead of doing full scan.  More
  information here can be found in Richard's announcement in LKML
  (Subject: UBI: Fastmap request for inclusion (v19)):

     http://thread.gmane.org/gmane.linux.kernel/1364922/focus=1369109

  One thing I want to explicitly say is that fastmap did not have large
  enough linux-next exposure.  It is partially my fault - I did not
  respond quickly enough.  I _really_ apologize for this.  But it had
  good testing and disabled by default, so I do not expect that we'll
  break anything.

  Fastmap is declared as experimental so far, and it is off by default.
  We did declare that the on-flash format may be changed.  The reason
  for this is that no one used it in real production so far, so there is
  a high risk that something is missing.  Besides, we do not have
  user-space tools supporting fastmap so far.

  Nevertheless, I suggest we merge this feature.  Many people want UBI's
  scanning bottleneck to be fixed and merging fastmap now should
  accelerate its production use.  The plan is to make it bullet-prove,
  somewhat clean-up, and make it the default for UBI.  I do not know how
  many kernel releases will it take.

  Basically, I what I want to do for fastmap is something like Linus did
  for btrfs few years ago."

* tag 'upstream-3.7-rc1-fastmap' of git://git.infradead.org/linux-ubi:
  UBI: Wire-up fastmap
  UBI: Add fastmap core
  UBI: Add fastmap support to the WL sub-system
  UBI: Add fastmap stuff to attach.c
  UBI: Wire-up ->fm_sem
  UBI: Add fastmap bits to build.c
  UBI: Add self_check_eba()
  UBI: Export next_sqnum()
  UBI: Add fastmap stuff to ubi.h
  UBI: Add fastmap on-flash data structures

Pill drm updates part 2 from Dave Airlie:
 "This is the follow-up pull, 3 pieces

  a) exynos next stuff, was delayed but looks okay to me, one patch in
     v4l bits but it was acked by v4l person.
  b) UAPI disintegration bits
  c) intel fixes - DP fixes, hang fixes, other misc fixes."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (52 commits)
  drm: exynos: hdmi: remove drm common hdmi platform data struct
  drm: exynos: hdmi: add support for exynos5 hdmi
  drm: exynos: hdmi: replace is_v13 with version check in hdmi
  drm: exynos: hdmi: add support for exynos5 mixer
  drm: exynos: hdmi: add support to disable video processor in mixer
  drm: exynos: hdmi: add support for platform variants for mixer
  drm: exynos: hdmi: add support for exynos5 hdmiphy
  drm: exynos: hdmi: add support for exynos5 ddc
  drm: exynos: remove drm hdmi platform data struct
  drm: exynos: hdmi: turn off HPD interrupt in HDMI chip
  drm: exynos: hdmi: use s5p-hdmi platform data
  drm: exynos: hdmi: fix interrupt handling
  drm: exynos: hdmi: support for platform variants
  media: s5p-hdmi: add HPD GPIO to platform data
  UAPI: (Scripted) Disintegrate include/drm
  drm/i915: Fix GT_MODE default value
  drm/i915: don't frob the vblank ts in finish_page_flip
  drm/i915: call drm_handle_vblank before finish_page_flip
  drm/i915: print warning if vmi915_gem_fault error is not handled
  drm/i915: EBUSY status handling added to i915_gem_fault().
  ...

Pull kbuild fixes from Michal Marek:
 "Here are two fixes I intended to send after v3.6-rc7, but failed to do
  so.  So please pull them for v3.7-rc1 and they will be picked up by
  stable.

  The first one fixes gcc -x <language> syntax in various build-time
  tests, which icecream and possible other gcc wrappers did not
  understand (and yes, icecream is going to be fixed as well).

  The second one fixes make tar-pkg so that unpacking the tarball does
  not replace the /lib -> /usr/lib symlink on recent Fedora releases."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix gcc -x syntax
  kbuild: Do not package /boot and /lib in make tar-pkg

Someone (over a year ago :-p) asked me to document localmodconfig in the
README file in the source code.  I thought it was a good idea but other
things were more important and I simply forgot about it.  Well, I
stumbled on the email asking me about this and I'm sending it out now.
Signed-off-by: NSteven "Mr. Procrastinator" Rostedt <rostedt@goodmis.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pul ACPI & Power Management updates from Len Brown:
 - acpidump utility added
 - intel_idle driver now supports IVB Xeon
 - turbostat utility can now count SMIs
 - ACPI can now bind to USB3 hubs
 - misc fixes

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits)
  ACPI: Add new sysfs interface to export device description
  ACPI: Harden acpi_table_parse_entries() against BIOS bug
  tools/power/turbostat: add option to count SMIs, re-name some options
  tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas
  intel_idle: enable IVB Xeon support
  tools/power turbostat: add [-m MSR#] option
  tools/power turbostat: make -M output pretty
  tools/power turbostat: print more turbo-limit information
  tools/power turbostat: delete unused line
  tools/power turbostat: run on IVB Xeon
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  ACPI: run _OSC after ACPI_FULL_INITIALIZATION
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  tools/power/acpi/acpidump: version 20071116
  tools/power/acpi/acpidump: version 20070714
  tools/power/acpi/acpidump: version 20060606
  tools/power/acpi/acpidump: version 20051111
  xo15-ebook: convert to module_acpi_driver()
  ...

Pull ceph updates from Sage Weil:
 "The bulk of this pull is a series from Alex that refactors and cleans
  up the RBD code to lay the groundwork for supporting the new image
  format and evolving feature set.  There are also some cleanups in
  libceph, and for ceph there's fixed validation of file striping
  layouts and a bugfix in the code handling a shrinking MDS cluster."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits)
  ceph: avoid 32-bit page index overflow
  ceph: return EIO on invalid layout on GET_DATALOC ioctl
  rbd: BUG on invalid layout
  ceph: propagate layout error on osd request creation
  libceph: check for invalid mapping
  ceph: convert to use le32_add_cpu()
  ceph: Fix oops when handling mdsmap that decreases max_mds
  rbd: update remaining header fields for v2
  rbd: get snapshot name for a v2 image
  rbd: get the snapshot context for a v2 image
  rbd: get image features for a v2 image
  rbd: get the object prefix for a v2 rbd image
  rbd: add code to get the size of a v2 rbd image
  rbd: lay out header probe infrastructure
  rbd: encapsulate code that gets snapshot info
  rbd: add an rbd features field
  rbd: don't use index in __rbd_add_snap_dev()
  rbd: kill create_snap sysfs entry
  rbd: define rbd_dev_image_id()
  rbd: define some new format constants
  ...

Pull ext4 updates from Ted Ts'o:
 "The big new feature added this time is supporting online resizing
  using the meta_bg feature.  This allows us to resize file systems
  which are greater than 16TB.  In addition, the speed of online
  resizing has been improved in general.

  We also fix a number of races, some of which could lead to deadlocks,
  in ext4's Asynchronous I/O and online defrag support, thanks to good
  work by Dmitry Monakhov.

  There are also a large number of more minor bug fixes and cleanups
  from a number of other ext4 contributors, quite of few of which have
  submitted fixes for the first time."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
  ext4: fix ext4_flush_completed_IO wait semantics
  ext4: fix mtime update in nodelalloc mode
  ext4: fix ext_remove_space for punch_hole case
  ext4: punch_hole should wait for DIO writers
  ext4: serialize truncate with owerwrite DIO workers
  ext4: endless truncate due to nonlocked dio readers
  ext4: serialize unlocked dio reads with truncate
  ext4: serialize dio nonlocked reads with defrag workers
  ext4: completed_io locking cleanup
  ext4: fix unwritten counter leakage
  ext4: give i_aiodio_unwritten a more appropriate name
  ext4: ext4_inode_info diet
  ext4: convert to use leXX_add_cpu()
  ext4: ext4_bread usage audit
  fs: reserve fallocate flag codepoint
  ext4: remove redundant offset check in mext_check_arguments()
  ext4: don't clear orphan list on ro mount with errors
  jbd2: fix assertion failure in commit code due to lacking transaction credits
  ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
  ext4: enable FITRIM ioctl on bigalloc file system
  ...

Pull i2c updates from Jean Delvare:
 "Most visible changes are the SMBus multiplexing support added to the
  i2c-i801 driver, as well as support for the VIA VX900."

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-piix4: Fix build failure
  i2c: Correct struct i2c_driver doc about detection
  i2c-i801: Let i2c-mux-gpio find the GPIO chip
  i2c-mux-gpio: Update documentation
  i2c-mux-gpio: Add support for dynamically allocated GPIO pins
  i2c-mux-gpio: Use devm_kzalloc instead of kzalloc
  i2c-i801: Support SMBus multiplexing on Asus Z8 series
  i2c-viapro: Add VIA VX900 device ID
  i2c-parport: i2c_parport_irq can be static
  i2c-designware: i2c_dw_xfer_msg can be static
  i2c/scx200_*: Replace printks with pr_<level>s
  i2c: Make I2C available on UML
  i2c: Convert struct i2c_msg initialization to C99 format
  i2c-smbus: Convert kzalloc to devm_kzalloc
  i2c-mux: Add support for device auto-detection

Pull IOMMU updates from Joerg Roedel:
 "This time the IOMMU updates contain a bunch of fixes and cleanups to
  various IOMMU drivers and the DMA debug code.  New features are the
  code for IRQ remapping support with the AMD IOMMU (preperation for
  that was already merged in the last release) and a debugfs interface
  to export some statistics in the NVidia Tegra IOMMU driver."

* tag 'iommu-updates-v3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (27 commits)
  iommu/amd: Remove obsolete comment line
  dma-debug: Remove local BUS_NOTIFY_UNBOUND_DRIVER define
  iommu/amd: Fix possible use after free in get_irq_table()
  iommu/amd: Report irq remapping through IOMMU-API
  iommu/amd: Print message to system log when irq remapping is enabled
  iommu/irq: Use amd_iommu_irq_ops if supported
  iommu/amd: Make sure irq remapping still works on dma init failure
  iommu/amd: Add initialization routines for AMD interrupt remapping
  iommu/amd: Add call-back routine for HPET MSI
  iommu/amd: Implement MSI routines for interrupt remapping
  iommu/amd: Add IOAPIC remapping routines
  iommu/amd: Add routines to manage irq remapping tables
  iommu/amd: Add IRTE invalidation routine
  iommu/amd: Make sure IOMMU is not considered to translate itself
  iommu/amd: Split device table initialization into irq and dma part
  iommu/amd: Check if IOAPIC information is correct
  iommu/amd: Allocate data structures to keep track of irq remapping tables
  iommu/amd: Add slab-cache for irq remapping tables
  iommu/amd: Keep track of HPET and IOAPIC device ids
  iommu/amd: Fix features reporting
  ...

Pull ARM updates from Russell King:
 "This is the first chunk of ARM updates for this merge window.
  Conflicts are expected in two files - asm/timex.h and
  mach-integrator/integrator_cp.c.  Nothing particularly stands out more
  than anything else.

  Most of the growth is down to the opcodes stuff from Dave Martin,
  which is countered by Rob's patches to use more of the asm-generic
  headers on ARM."

(A few more conflicts grew since then, but it all looked fairly trivial)

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits)
  ARM: 7548/1: include linux/sched.h in syscall.h
  ARM: 7541/1: Add ARM ERRATA 775420 workaround
  ARM: ensure vm_struct has its phys_addr member filled in
  ARM: 7540/1: kexec: Check segment memory addresses
  ARM: 7539/1: kexec: scan for dtb magic in segments
  ARM: 7538/1: delay: add registration mechanism for delay timer sources
  ARM: 7536/1: smp: Formalize an IPI for wakeup
  ARM: 7525/1: ptrace: use updated syscall number for syscall auditing
  ARM: 7524/1: support syscall tracing
  ARM: 7519/1: integrator: convert platform devices to Device Tree
  ARM: 7518/1: integrator: convert AMBA devices to device tree
  ARM: 7517/1: integrator: initial device tree support
  ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ
  ARM: 7515/1: integrator: check PL010 base address from resource
  ARM: 7514/1: integrator: call common init function from machine
  ARM: 7522/1: arch_timers: register a time/cycle counter
  ARM: 7523/1: arch_timers: enable the use of the virtual timer
  ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental
  ARM: 7520/1: Build dtb files in all target
  ARM: Fix build warning in arch/arm/mm/alignment.c
  ...

Pull microblaze arch updates from Michal Simek.

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  Revert "microblaze_mmu_v2: Update signal returning address"
  microblaze: Added more support for PCI
  microblaze: Prefer to use pr_XXX instead of printk(KERN_XX)
  microblaze: Fix bug with passing command line
  microblaze: Remove PAGE properties duplication
  microblaze: Remove additional andi which has been already done
  microblaze: Use predefined macro for ESR_DIZ
  microblaze: Support 4k/16k/64k pages
  microblaze: Do not used hardcoded value in exception handler
  microblaze: Added fdt chosen capability for timer
  microblaze: Add support for ioreadXX/iowriteXX_rep
  microblaze: Improve failure handling for GPIO reset
  microblaze: clinkage.h

Pull IMA bugfix (security subsystem) from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: fix bug in argument order

Pull m68knommu arch updates from Greg Ungerer:
 "Most of it is a cleanup of the ColdFire hardware header files.  We
  have had a few occurrances of bugs caused by inconsistent definitions
  of peripheral addresses.  These patches make them all consistent, and
  also clean out a bunch of old crap.  Overall we remove about 1000
  lines."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (27 commits)
  m68knommu: fix inconsistent formating in ColdFire 5407 definitions
  m68knommu: fix inconsistent formating in ColdFire 5307 definitions
  m68knommu: fix inconsistent formating in ColdFire 527x definitions
  m68knommu: fix inconsistent formating in ColdFire 5272 definitions
  m68knommu: fix inconsistent formating in ColdFire 523x definitions
  m68knommu: clean up ColdFire 54xx General Timer definitions
  m68knommu: clean up Pin Assignment definitions for the 54xx ColdFire CPU
  m68knommu: fix multi-function pin setup for FEC module on ColdFire 523x
  m68knommu: move ColdFire slice timer address defiens to 54xx header
  m68knommu: use read/write IO access functions in ColdFire m532x setup code
  m68knommu: modify ColdFire 532x GPIO register definitions to be consistent
  m68knommu: remove a lot of unsed definitions for 532x ColdFire
  m68knommu: use definitions for the ColdFire 528x FEC multi-function pins
  m68knommu: remove address offsets relative to IPSBAR for ColdFire 527x
  m68knommu: remove unused ColdFire 5282 register definitions
  m68knommu: fix wrong register offsets used for ColdFire 5272 multi-function pins
  m68knommu: make ColdFire 5249 MBAR2 register definitions absolute addresses
  m68knommu: make remaining ColdFire 5272 register definitions absolute addresses
  m68knommu: make ColdFire Park and Assignment register definitions absolute addresses
  m68knommu: make ColdFire Chip Select register definitions absolute addresses
  ...

Pull virtio changes from Rusty Russell:
 "New workflow: same git trees pulled by linux-next get sent straight to
  Linus.  Git is awkward at shuffling patches compared with quilt or mq,
  but that doesn't happen often once things get into my -next branch."

* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
  lguest: fix occasional crash in example launcher.
  virtio-blk: Disable callback in virtblk_done()
  virtio_mmio: Don't attempt to create empty virtqueues
  virtio_mmio: fix off by one error allocating queue
  drivers/virtio/virtio_pci.c: fix error return code
  virtio: don't crash when device is buggy
  virtio: remove CONFIG_VIRTIO_RING
  virtio: add help to CONFIG_VIRTIO option.
  virtio: support reserved vqs
  virtio: introduce an API to set affinity for a virtqueue
  virtio-ring: move queue_index to vring_virtqueue
  virtio_balloon: not EXPERIMENTAL any more.
  virtio-balloon: dependency fix
  virtio-blk: fix NULL checking in virtblk_alloc_req()
  virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
  virtio-blk: Add bio-based IO path for virtio-blk
  virtio: console: fix error handling in init() function
  tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
  tools: Add guest trace agent as a user tool
  virtio/console: Allocate scatterlist according to the current pipe size
  ...

Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...