Load instructions using ASI_PNF or other no-fault ASIs should not
cause a SIGSEGV or SIGBUS.

A garden variety unmapped address follows the TSB miss path, and when
no valid mapping is found in the process page tables, the miss handler
checks to see if the access was via a no-fault ASI.  It then fixes up
the target register with a zero, and skips the no-fault load
instruction.

But different paths are taken for data access exceptions and alignment
traps, and these do not respect the no-fault ASI. We add checks in
these paths for the no-fault ASI, and fix up the target register and
TPC just like in the TSB miss case.
Signed-off-by: NRob Gardner <rob.gardner@oracle.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A large sun4v SPARC system may have moments of intensive xcall activities,
usually caused by unmapping many pages on many CPUs concurrently. This can
flood receivers with CPU mondo interrupts for an extended period, causing
some unlucky senders to hit send-mondo timeout. This problem gets worse
as cpu count increases because sometimes mappings must be invalidated on
all CPUs, and sometimes all CPUs may gang up on a single CPU.

But a busy system is not a broken system. In the above scenario, as long
as the receiver is making forward progress processing mondo interrupts,
the sender should continue to retry.

This patch implements the receiver's forward progress meter by introducing
a per cpu counter 'cpu_mondo_counter[cpu]' where 'cpu' is in the range
of 0..NR_CPUS. The receiver increments its counter as soon as it receives
a mondo and the sender tracks the receiver's counter. If the receiver has
stopped making forward progress when the retry limit is reached, the sender
declares send-mondo-timeout and panic; otherwise, the receiver is allowed
to keep making forward progress.

In addition, it's been observed that PCIe hotplug events generate Correctable
Errors that are handled by hypervisor and then OS. Hypervisor 'borrows'
a guest cpu strand briefly to provide the service. If the cpu strand is
simultaneously the only cpu targeted by a mondo, it may not be available
for the mondo in 20msec, causing SUN4V mondo timeout. It appears that 1 second
is the agreed wait time between hypervisor and guest OS, this patch makes
the adjustment.

Orabug: 25476541
Orabug: 26417466
Signed-off-by: NJane Chu <jane.chu@oracle.com>
Reviewed-by: NSteve Sistare <steven.sistare@oracle.com>
Reviewed-by: NAnthony Yznaga <anthony.yznaga@oracle.com>
Reviewed-by: NRob Gardner <rob.gardner@oracle.com>
Reviewed-by: NThomas Tai <thomas.tai@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the following task->mm helper APIs into a new header file,
<linux/sched/mm.h>, to further reduce the size and complexity
of <linux/sched.h>.

Here are how the APIs are used in various kernel files:

  # mm_alloc():
  arch/arm/mach-rpc/ecard.c
  fs/exec.c
  include/linux/sched/mm.h
  kernel/fork.c

  # __mmdrop():
  arch/arc/include/asm/mmu_context.h
  include/linux/sched/mm.h
  kernel/fork.c

  # mmdrop():
  arch/arm/mach-rpc/ecard.c
  arch/m68k/sun3/mmu_emu.c
  arch/x86/mm/tlb.c
  drivers/gpu/drm/amd/amdkfd/kfd_process.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/hw/hfi1/file_ops.c
  drivers/vfio/vfio_iommu_spapr_tce.c
  fs/exec.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/mmu_notifier.h
  include/linux/sched/mm.h
  kernel/fork.c
  kernel/futex.c
  kernel/sched/core.c
  mm/khugepaged.c
  mm/ksm.c
  mm/mmu_context.c
  mm/mmu_notifier.c
  mm/oom_kill.c
  virt/kvm/kvm_main.c

  # mmdrop_async_fn():
  include/linux/sched/mm.h

  # mmdrop_async():
  include/linux/sched/mm.h
  kernel/fork.c

  # mmget_not_zero():
  fs/userfaultfd.c
  include/linux/sched/mm.h
  mm/oom_kill.c

  # mmput():
  arch/arc/include/asm/mmu_context.h
  arch/arc/kernel/troubleshoot.c
  arch/frv/mm/mmu-context.c
  arch/powerpc/platforms/cell/spufs/context.c
  arch/sparc/include/asm/mmu_context_32.h
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/core/uverbs_main.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/exec.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/events/uprobes.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/oom_kill.c
  mm/process_vm_access.c
  mm/rmap.c
  mm/swapfile.c
  mm/util.c
  virt/kvm/async_pf.c

  # mmput_async():
  include/linux/sched/mm.h
  kernel/fork.c
  mm/oom_kill.c

  # get_task_mm():
  arch/arc/kernel/troubleshoot.c
  arch/powerpc/platforms/cell/spufs/context.c
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/util.c

  # mm_access():
  fs/proc/base.c
  include/linux/sched/mm.h
  kernel/fork.c
  mm/process_vm_access.c

  # mm_release():
  arch/arc/include/asm/mmu_context.h
  fs/exec.c
  include/linux/sched/mm.h
  include/uapi/linux/sched.h
  kernel/exit.c
  kernel/fork.c
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Apart from adding the helper function itself, the rest of the kernel is
converted mechanically using:

  git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/'
  git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/'

This is needed for a later patch that hooks into the helper, but might
be a worthwhile cleanup on its own.

(Michal Hocko provided most of the kerneldoc comment.)

Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.comSigned-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

User processes trying to access an invalid memory address via PIO will
receive a SIGBUS signal instead of causing a panic.  Memory errors will
receive a SIGKILL since a SIGBUS may result in a coredump which may
attempt to repeat the faulting access.
Signed-off-by: NLiam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit)
then some of the strings will overflow.  I don't know if that's possible
but it seems simple enough to make the buffers slightly larger.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These files were only including module.h for exception table
related functions.  We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As execution domain support is gone we can remove
signal translation from the signal code and remove
exec_domain from thread_info.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NDavid S. Miller <davem@davemloft.net>

"echo c > /proc/sysrq-trigger" does not result in a system crash. There
are two problems. One is that the trap handler ignores the global
variable, panic_on_oops. The other is that smp_send_stop() is a no-op
which leaves the other cpus running normally when one cpu panics.
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Removes some functions that are not used anywhere:
do_fpdis_tl1() do_iae_tl1() do_dae_tl1() do_cee_tl1()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an attacker can cause a controlled kernel stack overflow, overwriting
the restart block is a very juicy exploit target.  This is because the
restart_block is held in the same memory allocation as the kernel stack.

Moving the restart block to struct task_struct prevents this exploit by
making the restart_block harder to locate.

Note that there are other fields in thread_info that are also easy
targets, at least on some architectures.

It's also a decent simplification, since the restart code is more or less
identical on all architectures.

[james.hogan@imgtec.com: metag: align thread_info::supervisor_stack]
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Miller <davem@davemloft.net>
Acked-by: NRichard Weinberger <richard@nod.at>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We've witnessed a few TLB events causing the machine to power off because
of prom_halt. In one case it was some nfs related area during rmmod. Another
was an mmapper of /dev/mem. A more recent one is an ITLB issue with
a bad pagesize which could be a hardware bug. Bugs happen but we should
attempt to not power off the machine and/or hang it when possible.

This is a DTLB error from an mmapper of /dev/mem:
[root@sparcie ~]# SUN4V-DTLB: Error at TPC[fffff80100903e6c], tl 1
SUN4V-DTLB: TPC<0xfffff80100903e6c>
SUN4V-DTLB: O7[fffff801081979d0]
SUN4V-DTLB: O7<0xfffff801081979d0>
SUN4V-DTLB: vaddr[fffff80100000000] ctx[1250] pte[98000000000f0610] error[2]
.

This is recent mainline for ITLB:
[ 3708.179864] SUN4V-ITLB: TPC<0xfffffc010071cefc>
[ 3708.188866] SUN4V-ITLB: O7[fffffc010071cee8]
[ 3708.197377] SUN4V-ITLB: O7<0xfffffc010071cee8>
[ 3708.206539] SUN4V-ITLB: vaddr[e0003] ctx[1a3c] pte[2900000dcc800eeb] error[4]
.

Normally sun4v_itlb_error_report() and sun4v_dtlb_error_report() would call
prom_halt() and drop us to OF command prompt "ok". This isn't the case for
LDOMs and the machine powers off.

For the HV reported error of HV_ENORADDR for HV HV_MMU_MAP_ADDR_TRAP we cause
a SIGBUS error by qualifying it within do_sparc64_fault() for fault code mask
of FAULT_CODE_BAD_RA. This is done when trap level (%tl) is less or equal
one("1"). Otherwise, for %tl > 1,  we proceed eventually to die_if_kernel().

The logic of this patch was partially inspired by David Miller's feedback.

Power off of large sparc64 machines is painful. Plus die_if_kernel provides
more context. A reset sequence isn't a brief period on large sparc64 but
better than power-off/power-on sequence.

Cc: sparclinux@vger.kernel.org
Signed-off-by: NBob Picco <bob.picco@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
kernel/sys_sparc_64.c:643:17: warning: symbol 'sys_kern_features' was not declared. Should it be static?
kernel/unaligned_64.c:297:17: warning: symbol 'kernel_unaligned_trap' was not declared. Should it be static?
kernel/unaligned_64.c:387:5: warning: symbol 'handle_popc' was not declared. Should it be static?
kernel/unaligned_64.c:428:5: warning: symbol 'handle_ldf_stq' was not declared. Should it be static?
kernel/unaligned_64.c:553:6: warning: symbol 'handle_ld_nf' was not declared. Should it be static?
kernel/unaligned_64.c:579:6: warning: symbol 'handle_lddfmna' was not declared. Should it be static?
kernel/unaligned_64.c:643:6: warning: symbol 'handle_stdfmna' was not declared. Should it be static?

Functions that are only used in kernel/ - add prototypes in kernel.h
Functions used outside kernel/ - add prototype in asm/setup.h
Removed local prototypes

One of the local prototypes had wrong signature (return void - not int).
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warning:
traps_64.c:2384:6: error: symbol 'die_if_kernel' redeclared with different type (originally declared at include/asm/bug.h:23) - different modifiers

Add proper __noreturn to the implementation to fix this
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following sparse warning:
math_{32,64}.c: warning: symbol 'do_mathemu' was not declared. Should it be static?

Add prototype in processor_{32,64} and drop extern in traps_{32,64}.c
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mark the places when the system are in user or are in kernel.
This is used to make full dynticks system (tickless) --
CONFIG_NO_HZ_FULL dependence.
Signed-off-by: NKirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both dump_stack() and show_stack() are currently implemented by each
architecture.  show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack().  On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.

The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().

There's no reason to require archs to implement two separate but mostly
identical functions.  It leads to unnecessary subtle information.

This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin.  Blackfin's
dump_stack() does something wonky that I don't understand.

Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information.  This is used
in blackfin.

This patch brings the following behavior changes.

* On some archs, an extra level in backtrace for show_stack() could be
  printed.  This is because the top frame was determined in
  dump_stack() on those archs while generic dump_stack() can't do that
  reliably.  It can be compensated by inlining dump_stack() but not
  sure whether that'd be necessary.

* Most archs didn't use to print debug info on dump_stack().  They do
  now.

An example WARN dump follows.

 WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
 Hardware name: empty
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
  0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
  ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
  0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
 Call Trace:
  [<ffffffff81c614dc>] dump_stack+0x19/0x1b
  [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
  [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8234a071>] init_workqueues+0x35/0x505
  ...

v2: CPU number added to the generic debug info as requested by s390
    folks and dropped the s390 specific dump_stack().  This loses %ksp
    from the debug message which the maintainers think isn't important
    enough to keep the s390-specific dump_stack() implementation.

    dump_stack_print_info() is moved to kernel/printk.c from
    lib/dump_stack.c.  Because linkage is per objecct file,
    dump_stack_print_info() living in the same lib file as generic
    dump_stack() means that archs which implement custom dump_stack()
    - at this point, only blackfin - can't use dump_stack_print_info()
    as that will bring in the generic version of dump_stack() too.  v1
    The v1 patch broke build on blackfin due to this issue.  The build
    breakage was reported by Fengguang Wu.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	[s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move that sucker to just before TI_FPDEPTH and replace stb with sth in
etrap_save().  Take current_ds to its old place, so that we don't push
wsaved into TI_... flags.  That allows to lose clearing syscall_noerror
on return from syscall.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Missing error types, attributes, and report fields.  Pad out
to 64-bytes.

Make string reporting cleaner and easier to extend in the future using
"const char *" arrays that index by either bit position, or absolute
field value.

Report the raw 64-byte error report as a sequence of u64s before the
annotated version.

Only report fields which are valid, given the context and the
attribute bits which are set.

For shutdown requests, use the local copy of the error report not the
one we just freed up back to the queue.  Also, use orderly_poweroff()
just like the Domain Services shutdown request code does.

If the real-address reported is "-1" (unknown) try to disassemble the
instruction to report the effective address of the access.  Only do
this in privileged mode.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 40138249 and
ffa9009c.

There are problems with how the flag bytes were rearranged, in
particular we really can't move values down into the lowest
16 bits since those are used for individual state bits.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After fixing a couple of brainos, it even seems to work.  What's done here
is move of ->syscall_noerror right before FPDEPTH byte in ->flags and
using sth to [%g6 + TI_SYS_NOERROR] instead of stb to [%g6 + TI_FPDEPTH] in
both branches of etrap_save.  AFAICS, that ought to be solid.  Again,
deciding what to do with now unused delay slot of branch on ->syscall_noerror
and dealing with the order of tests in ret_from_sys is a separate question,
but at least that way we don't have to clean ->syscall_noerror in there at
all.  AFAICS, it ought to be a clear win - sth is not going to cost more than
stb on etrap_64.S side of things, and we are losing write on syscalls.S one.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

prom_printf() takes printf style arguments.  Specifing GCC's format
attribute reveals that there are several wrong usages of prom_printf().

This fixes those wrong format strings and arguments, and also leaves
format attributes in order to detect similar mistakes at compile time.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UltraSPARC-T2 and later do not use the fp_exception_other trap and do
not set the floating point trap type field in the %fsr at all when you
try to execute an unimplemented FPU operation.

Instead, it uses the illegal_instruction trap and it leaves the
floating point trap type field clear.

So we should not validate the %fsr trap type field when do_mathemu()
is invoked from the illegal instruction handler.

Also, the floating point trap type field is 3 bits, not 4 bits.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Disintegrate asm/system.h for Sparc.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: sparclinux@vger.kernel.org

Semicolons are not necessary after switch/while/for/if braces
so remove them.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most of the warnings emitted (we fail arch/sparc file
builds with -Werror) were legitimate but harmless, however
one case (n2_pcr_write) was a genuine bug.

Based almost entirely upon a patch by Sam Ravnborg.
Reported-by: NDennis Gilmore <dennis@ausil.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Like x86, when the function graph tracer is enabled, emit the ftrace
stub as well as the program counter it will be transformed back into.

We duplicate a lot of similar stack walking logic in 3 or 4 spots, so
eventually we should consolidate things like x86 does.

Thanks to Frederic Weisbecker for pointing this out.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This gets rid of a local function (is_kernel_stack()) which tries to
do the same thing, yet poorly in that it doesn't handle IRQ stacks
properly.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

People should be using the perf events interfaces, and
the way these system call facilities used the %pcr conflicts
with the usage of the NMI watchdog and perf events.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Surprisingly this actually makes LOAD_PER_CPU_BASE() a little
more efficient.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we do a userspace access from kernel mode, and get a
data access exception, we need to check the exception
table just like a normal fault does.

The spitfire DAX handler was doing this, but such logic
was missing from the sun4v DAX code.
Reported-by: NDennis Gilmore <dgilmore@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move all applicable EXPORT_SYMBOL()s to the file where the respective
symbol is defined.

Removed all the includes that are no longer needed in sparc_ksyms_64.c

Comment all remaining EXPORT_SYMBOL()s in sparc_ksyms_64.c
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Additions by Julian Calaby:
* Moved EXPORT_SYMBOL()s for prom functions to their rightful places.
* Made some minor cleanups to the includes and comments of sparc_ksyms_64.c
* Updated and tidied commit message.
* Rebased patch over sparc-2.6.git HEAD.
* Ensured that all modified files have the correct includes.
Signed-off-by: NJulian Calaby <julian.calaby@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Morton wrote:

    People keep on doing

            printk("%llu", some_u64);

    testing it only on x86_64 and this generates a warning storm on
    powerpc, sparc64, etc.  Because they use `long', not `long long'.

    Quite a few 64-bit architectures are using `long' for their
    s64/u64 types.  We should convert them all to `long long'.

Update types.h so we use unsigned long long for u64 and
fix all warnings in sparc64 code.
Tested with an allnoconfig, defconfig and allmodconfig builds.

This patch introduces additional warnings in several drivers.
These will be dealt with in separate patches.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Move all files from sparc64/kernel/ to sparc/kernel
  - rename as appropriate
o Update sparc/Makefile to the changes
o Update sparc/kernel/Makefile to include the sparc64 files

NOTE: This commit changes link order on sparc64!

Link order had to change for either of sparc32 and sparc64.
And assuming sparc64 see more testing than sparc32 change link
order on sparc64 where issues will be caught faster.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>