This adds dpm support for trinity asics.  This includes:
- clockgating
- powergating
- dynamic engine clock scaling
- dynamic voltage scaling

set radeon.dpm=1 to enable it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for sumo asics.  This includes:
- clockgating
- powergating
- dynamic engine clock scaling
- dynamic voltage scaling

set radeon.dpm=1 to enable it.

v2: fix indention
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

This adds dpm support for btc asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching (requires additional acpi support)

Set radeon.dpm=1 to enable.

v2: reduce stack usage
v3: attempt to fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for evergreen asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching (requires additional acpi support)

Set radeon.dpm=1 to enable.

v2: reduce stack usage, rename ulv struct
v3: fix thermal interrupt check notices by Jerome
v4: fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for rv7xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: reduce stack usage
v3: fix 64 bit div
v4: fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for rv6xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: remove duplicate line
v3: fix thermal interrupt check noticed by Jerome
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

This adds dpm support for rs780/rs880 asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic voltage scaling

set radeon.dpm=1 to enable it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are shared by rs780/rs880, rv6xx, and newer chips.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the common dpm (dynamic power management)
infrastructure:
- dpm callbacks
- dpm init/fini/suspend/resume
- dpm power state selection

No device specific code is enabled yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Has a different dpm controller than r600.

v2: rebase on gpu reset changes
v3: rebase on get_xclk changes
v4: update rptr/wtpr callbacks
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dpm needs access to atombios data and command tables
for setup and calculation of a number of parameters.

v2: endian fix
v3: fix mc reg table bug
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is required for certain advanced functionality.

v2: save/restore list takes dword offsets
v3: rebase on gpu reset changes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Avoids confusion and duplication.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: fix up for latest reset changes
v3: use CP for pt updates for now
v4: update for 2 level PTs
v5: update for ib_parse removal
v6: vm_flush api change
v7: rebase
v8: fix gfx ring function pointers
v9: fix vm_set_page function params
v10: update for compute changes
v11: cleanup for release
v12: update rptr/wptr callbacks
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The compute rings use RELEASE_MEM rather then EOP
packets for writing fences and there is no SYNC_PFP_ME
packet on the compute rings.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Type 2 packets are deprecated on CIK MEC and we should use
type 3 nop packets.  Setting the count field to the max value
(0x3fff) indicates that only one dword should be skipped
like a type 2 packet.

v2: add comment to code
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

On CIK, the compute rings work slightly differently than
on previous asics, however the basic concepts are the same.

The main differences:
- New MEC engines for compute queues
- Multiple queues per MEC:
  - CI/KB: 1 MEC, 4 pipes per MEC, 8 queues per pipe = 32 queues
  -    KV: 2 MEC, 4 pipes per MEC, 8 queues per pipe = 64 queues
- Queues can be allocated and scheduled by another queue
- New doorbell aperture allows you to assign space in the aperture
  for the wptr which allows for userspace access to queues

v2: add wptr shadow, fix eop setup
v3: fix comment
v4: switch to new callback method
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

The doorbell aperture is a PCI BAR whose pages can be
mapped to compute resources for things like wptrs
for userspace queues.

This patch maps the BAR and sets up a simple allocator
to allocate pages from the BAR.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add callbacks to the radeon_asic struct to handle
rptr/wptr fetchs and wptr updates.
We currently use one version for all rings, but this
allows us to override with a ring specific versions.

Needed for compute rings on CIK.

v2: udpate as per Christian's comments
v3: fix some rebase cruft
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows us to select instanced registers based on:
- ME (micro engine
- Pipe
- Queue
- VMID

Switch MC setup to use this new function.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: agd5f: fix clock dividers setup for bonaire
v3: agd5f: rebase
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CIK uses a slightly different variant of the table structs
and params.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SI uses v5 of the command table and uses a different table
for memory PLLs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update to the newer programming model.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>