They report all busses as MMCONFIG capable, but it never works for the
internal devices in the CPU's builtin northbridge.

It just probes all func 0 devices on bus 0 (the internal northbridge is
currently always on bus 0) and if they are not accessible using MCFG they are
put into a special fallback bitmap.

On systems where it isn't we assume the BIOS vendor supplied correct MCFG.

Requires the earlier patch for mmconfig type1 fallback
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When there is no entry for a bus in MCFG fall back to type1.  This is
especially important on K8 systems where always some devices can't be accessed
using mmconfig (in particular the builtin northbridge doesn't support it for
its own devices)

Cc: <gregkh@suse.de>
Cc: <jgarzik@pobox.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's illegal because it can sleep.

Use a two step lookup scheme instead.  First look up the vm_struct, then
change the direct mapping, then finally unmap it.  That's ok because nobody
can change the particular virtual address range as long as the vm_struct is
still in the global list.

Also added some LinuxDoc documentation to iounmap.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Disabling LAPIC timer isn't sufficient.  In some situations, such as we
enabled NMI watchdog, there is still unexpected interrupt (such as NMI)
invoked in offline CPU.  This also avoids offline CPU receives spurious
interrupt and anything similar.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: N"Seth, Rohit" <rohit.seth@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Otherwise TSC->HPET fallback could see incorrect state and crash later.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Ben noticed that on certain cards we've landed the AGP space on top of
the second aperture instead of after it..  Which messes things up a lot
on those machines.

This just moves the gart further out, a more correct fix is in the works
from Ben for after 2.6.15.
Signed-off-by: NDave Airlie <airlied@linux.ie>
CC: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

*** Warning: ".wireless_send_event" [net/ieee80211/ieee80211_crypt_tkip.ko] undefined!
Signed-off-by: NOlaf Hering <olh@suse.de>

 net/ieee80211/Kconfig |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Get rid of warning in case of race with ring full and lockless
tx on the skge driver. It is possible to be in the transmit
routine with no available slots and already stopped.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Fix incorrect pointer usage on two calls to kunmap_atomic().
This seems to happen a lot, because kunmap() wants the struct page *,
whereas kunmap_atomic() instead wants the mapped virtual address.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Nick Piggin points out that a few drivers play games with VM_IO (why?
who knows..) and thus a pfn-remapped area may not have that bit set even
if remap_pfn_range() set it originally.

So make it explicit in get_user_pages() that we don't follow VM_PFNMAP
pages, since pretty much by definition they do not have a "struct page"
associated with them.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a TFTP client is SNATed so that the port is also changed, the
port is never changed back for the expected connection.
Signed-off-by: NMarcus Sundberg <marcus@ingate.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With this fix, sparc links vmlinuz again using crosstool.  Without this
fix, the final link fails missing several dozen dozen symbols, beginning
with:

    kernel/built-in.o(.text+0x6fd0): In function `do_exit':
    : undefined reference to `exit_io_context'

(exit_io_context is defined in block/ll_rw_blk.c).
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes one build error introduced in sparc with the patch of Oct 30,
resent Nov 4 "[patch 3/5] atomic: atomic_inc_not_zero" I still can't get
sparc to build, but at least it gets further after I remove this line. 
Apparently, this change was agreed to by Andrew and Nick on Nov 14, but
everyone thought someone else was doing it.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Hareesh Nagarajan <hnagar2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a patch from Hareesh Nagarajan.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spotted by Francois Romieu, thanks!
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a double free in the scsi scan code if a LLDD's slave_alloc()
call fails.  There is a direct call to scsi_free_queue and then the
following put_device calls the release function, which also frees the
queue.

Remove the redundant scsi_free_queue.
Signed-off-by: NBrian King <brking@us.ibm.com>
Tested-by: NNathan Lynch <ntl@pobox.com>
[ Also removed some strange whitespace artifacts in that area ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The CSR contains garbage after a coldboot on RS/6000.
One some systems (like my 44p 270) the MAC address is all FF,
on others (like my B50) it is ff:ff:ff:fd:ff:6b.

It can eventually be fixed by loading pcnet32, set the interface
into the UP state, rmmod pcnet32 and load it again. But this worked
only on the 270.

Only netbooting after a cold start provides the correct MAC address
via prom and CSR. This makes it very unreliable.
I dont know why the MAC is stored in two different places. Remove
the special case for powerpc, which was added in early 2.4 development.
Signed-off-by: NOlaf Hering <olh@suse.de>

 drivers/net/pcnet32.c |    5 -----
 1 files changed, 5 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This reverts commit 1b0997f5, which in
turn reverted 34ea80ec (which is thus
re-instated).

Quoth James Bottomley:

  "All it's doing is deferring the device_put() from the
   scsi_put_command() to after the scsi_run_queue(), which doesn't fix
   the sleep while atomic problem of the device release method.  In both
   cases we still get the semaphore in atomic context problem which is
   caused by scsi_reap_target() doing a device_del(), which I assumed
   (wrongly) was valid from atomic context."

who also promised to fix scsi_reap_target().
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The raid5 stripe cache was recently changed from fixed size (NR_STRIPES) to
variable size (conf->max_nr_stripes).  However there are two places that still
use the constant and as a result, reducing the size of the stripe cache can
result in a deadlock.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Who would submit code with a FIXME like that in it !!!!
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_MAX_RAW_DEVS should appear immediately after CONFIG_RAW_DRIVER.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This has been broken for months.  On resume, we call acpi_pci_link_set()
with interrupts off, so we get a warning when we try to do a kmalloc of non
atomic memory.  The actual allocation is just 2 long's (plus extra byte for
some reason I can't fathom), so a simple conversion to GFP_ATOMIC is
probably the safest way to fix this.

The error looks like this..

Debug: sleeping function called from invalid context at mm/slab.c:2486
in_atomic():0, irqs_disabled():1
 [<c0143f6c>] kmem_cache_alloc+0x40/0x56
 [<c0206a2e>] acpi_pci_link_set+0x3f/0x17f
 [<c0206f96>] irqrouter_resume+0x1e/0x3c
 [<c0239bca>] __sysdev_resume+0x11/0x6b
 [<c0239e88>] sysdev_resume+0x34/0x52
 [<c023de21>] device_power_up+0x5/0xa
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Hitting BUG_ON() in __alloc_bootmem_core() when there is no free page
available in the first node's memory.  For the case of kdump on PPC64
(Power 4 machine), the captured kernel is used two memory regions - memory
for TCE tables (tce-base and tce-size at top of RAM and reserved) and
captured kernel memory region (crashk_base and crashk_size).  Since we
reserve the memory for the first node, we should be returning from
__alloc_bootmem_core() to search for the next node (pg_dat).

Currently, find_next_zero_bit() is returning the n^th bit (eidx) when there
is no free page.  Then, test_bit() is failed since we set 0xff only for the
actual size initially (init_bootmem_core()) even though rounded up to one
page for bdata->node_bootmem_map.  We are hitting the BUG_ON after failing
to enter second "for" loop.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I realized ZONE_DMA32 has a trivial bug at Kconfig for ia64.  In
include/linux/gfp.h on 2.6.15-rc5-mm1, CONFIG is define like followings.

#ifdef CONFIG_DMA_IS_DMA32
#define __GFP_DMA32	((__force gfp_t)0x01)	/* ZONE_DMA is ZONE_DMA32
*/
       :
       :

So, CONFIG_"ZONE"_DMA_IS_DMA32 is clearly wrong.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The bd622663 commit broke the UCB1x00
touchscreen driver since the idev structure was assumed to be into the ts
structure, simply casting the former to the later in a couple places.

This patch fixes those, and also cache the idev pointer between multiple
calls to input_report_abs() to avoid growing the compiled code needlessly.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Spotted by a Fedora user.  Compiling with DEBUG_PARPORT set fails due to
the broken cast.

Just remove it.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When multiple probes are registered at the same address and if due to some
recursion (probe getting triggered within a probe handler), we skip calling
pre_handlers and just increment nmissed field.

The below patch make sure it walks the list for multiple probes case.
Without the below patch we get incorrect results of nmissed count for
multiple probe case.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For Kprobes critical path is the path from debug break exception handler
till the control reaches kprobes exception code.  No probes can be
supported in this path as we will end up in recursion.

This patch prevents this by moving the below function to safe __kprobes
section onto which no probes can be inserted.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>