- 16 5月, 2011 1 次提交
-
-
由 Matthew L. Creech 提交于
If a UBIFS filesystem is being mounted read-write, or is being remounted from read-only to read-write, check for the "space_fixup" flag and fix all LEBs containing empty space if necessary. Artem: tweaked the patch a bit Signed-off-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 14 5月, 2011 4 次提交
-
-
由 Artem Bityutskiy 提交于
When re-mounting from R/O mode to R/W mode and the LEB count in the superblock is not up-to date, because for the underlying UBI volume became larger, we re-write the superblock. We allocate RAM for these purposes, but never free it. So this is a memory leak, although very rare one. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
-
由 Artem Bityutskiy 提交于
This patch improves the 'dbg_check_space_info()' function which checks whether the amount of space before re-mounting and after re-mounting is the same (remounting from R/O to R/W modes and vice-versa). The problem is that 'dbg_check_space_info()' does not save the budgeting information before re-mounting, so when an error is reported, we do not know why the amount of free space changed. This patches makes the following changes: 1. Teaches 'dbg_dump_budg()' function to accept a 'struct ubifs_budg_info' argument and print out the this argument. This way we may ask it to print any saved budgeting info, no only the current one. 2. Accordingly changes all the callers of 'dbg_dump_budg()' to comply with the changed interface. 3. Introduce a 'saved_bi' (saved budgeting info) field to 'struct ubifs_debug_info' and save the budgeting info before re-mounting there. 4. Change 'dbg_check_space_info()' and make it print both old and new budgeting information. 5. Additionally, save 'c->igx_gc_cnt' and print it if and error happens. This value contributes to the amount of free space, so we have to print it. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
This patch separates out all the budgeting-related information from 'struct ubifs_info' to 'struct ubifs_budg_info'. This way the code looks a bit cleaner. However, the main driver for this is that we want to save budgeting information and print it later, so a separate data structure for this is helpful. This patch is a preparation for the further debugging output improvements. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Fix several minor stylistic issues: * lines longer than 80 characters * space before closing parenthesis ')' * spaces in the indentations Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 03 5月, 2011 1 次提交
-
-
由 Artem Bityutskiy 提交于
Currently UBIFS has a small optimization - it frees write-buffers when it is re-mounted from R/W mode to R/O mode. Of course, when it is mounted R/O, it does not allocate write-buffers as well. This optimization is nice but it leads to subtle problems and complications in recovery, which I can reproduce using the integck test. The symptoms are that after a power cut the file-system cannot be mounted if we first mount it R/O, and then re-mount R/W - 'ubifs_rcvry_gc_commit()' prints: UBIFS error (pid 34456): could not find an empty LEB Analysis of the problem. When mounting R/W, the reply process sets journal heads to buds [1], but when mounting R/O - it does not do this, because the write-buffers are not allocated. So 'ubifs_rcvry_gc_commit()' works completely differently for the same file-system but for the following 2 cases: 1. mounting R/W after a power cut and recover 2. mounting R/O after a power cut, re-mounting R/W and run deferred recovery In the former case, we have journal heads seeked to the a bud, in the latter case, they are non-seeked (wbuf->lnum == -1). So in the latter case we do not try to recover the GC LEB by garbage-collecting to the GC head, but we just try to find an empty LEB, and there may be no empty LEBs, so we just fail. On the other hand, in the former case (mount R/W), we are able to make a GC LEB (@c->gc_lnum) by garbage-collecting. Thus, let's remove this small nice optimization and always allocate write-buffers. This should not make too big difference - we have only 3 of them, each of max. write unit size, which is usually 2KiB. So this is about 6KiB of RAM for the typical case, and only when mounted R/O. [1]: Note, currently the replay process is setting (seeking) the journal heads to _some_ buds, not necessarily to the buds which had been the journal heads before the power cut happened. This will be fixed separately. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
-
- 21 4月, 2011 1 次提交
-
-
由 Artem Bityutskiy 提交于
When UBIFS switches to R/O mode because it detects I/O failures, then when we unmount, we still may have allocated budget, and the assertions which verify that we have not budget will fire. But it is expected to have the budget in case of I/O failures, so the assertion warnings will be false. Suppress them for the I/O failure case. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 20 4月, 2011 1 次提交
-
-
由 Artem Bityutskiy 提交于
This patch fixes UBIFS mount failure when the debugging support is enabled, we are recovering from a power cut, we were first mounter R/O and we are re-mounting R/W. In this case we should not assume that the amount of free space before we have re-mounted R/W and after are equivalent, because when we have mounted R/O the file-system is in a non-committed state so the amount of free space is slightly smaller, due to the fact that we cannot predict the amount of free space precisely before we commit. This patch fixes the issue by skipping the debugging check in case of recovery. This issue was reported by Caizhiyong <caizhiyong@huawei.com> here: http://thread.gmane.org/gmane.linux.drivers.mtd/34350/focus=34387Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reported-by: NCaizhiyong <caizhiyong@huawei.com> Cc: stable@kernel.org [2.6.30+]
-
- 05 4月, 2011 1 次提交
-
-
由 Artem Bityutskiy 提交于
This patch fixes UBIFS assertion warnings like: UBIFS assert failed in ubifs_leb_unmap at 135 (pid 29365) Pid: 29365, comm: integck Tainted: G I 2.6.37-ubi-2.6+ #34 Call Trace: [<ffffffffa047c663>] ubifs_lpt_init+0x95e/0x9ee [ubifs] [<ffffffffa04623a7>] ubifs_remount_fs+0x2c7/0x762 [ubifs] [<ffffffff810f066e>] do_remount_sb+0xb6/0x101 [<ffffffff81106ff4>] ? do_mount+0x191/0x78e [<ffffffff811070bb>] do_mount+0x258/0x78e [<ffffffff810da1e8>] ? alloc_pages_current+0xa2/0xc5 [<ffffffff81107674>] sys_mount+0x83/0xbd [<ffffffff81009a12>] system_call_fastpath+0x16/0x1b They happen when we re-mount from R/O mode to R/W mode. While re-mounting, we write to the media, but we still have the c->ro_mount flag set. The fix is very simple - just clear the flag before starting re-mounting R/W. These warnings are caused by the following commit: 2ef13294 For -stable guys: this bug was introduced in 2.6.38, this is materieal for 2.6.38-stable. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org [2.6.38]
-
- 11 3月, 2011 3 次提交
-
-
由 Artem Bityutskiy 提交于
Change the default UBIFS behavior WRT data CRC checking. Currently, UBIFS checks data CRC when reading, which slows it down quite a bit, and this is the default option. However, it looks like in average user does not need this feature and would prefer faster read speed over extra reliability. And this seems to be de-facto standard that file-systems do not check data CRC every time they read from the media. Thus, make UBIFS default behavior so that it does not check data CRC. This corresponds to the no_chk_data_crc mount option. Those users who need extra protection can always enable it using the chk_data_crc option. Please, read more information about this feature here: http://www.linux-mtd.infradead.org/doc/ubifs.html#L_checksummingSigned-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Improve debugging messages by printing the maximum index node size on mount. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Matthew L. Creech 提交于
Running kernel 2.6.37, my PPC-based device occasionally gets an order-2 allocation failure in UBIFS, which causes the root FS to become unwritable: kswapd0: page allocation failure. order:2, mode:0x4050 Call Trace: [c787dc30] [c00085b8] show_stack+0x7c/0x194 (unreliable) [c787dc70] [c0061aec] __alloc_pages_nodemask+0x4f0/0x57c [c787dd00] [c0061b98] __get_free_pages+0x20/0x50 [c787dd10] [c00e4f88] ubifs_jnl_write_data+0x54/0x200 [c787dd50] [c00e82d4] do_writepage+0x94/0x198 [c787dd90] [c00675e4] shrink_page_list+0x40c/0x77c [c787de40] [c0067de0] shrink_inactive_list+0x1e0/0x370 [c787de90] [c0068224] shrink_zone+0x2b4/0x2b8 [c787df00] [c0068854] kswapd+0x408/0x5d4 [c787dfb0] [c0037bcc] kthread+0x80/0x84 [c787dff0] [c000ef44] kernel_thread+0x4c/0x68 Similar problems were encountered last April by Tomasz Stanislawski: http://patchwork.ozlabs.org/patch/50965/ This patch implements Artem's suggested fix: fall back to a mutex-protected static buffer, allocated at mount time. I tested it by forcing execution down the failure path, and didn't see any ill effects. Artem: massaged the patch a little, improved it so that we'd not allocate the write reserve buffer when we are in R/O mode. Signed-off-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 10 3月, 2011 1 次提交
-
-
由 Jens Axboe 提交于
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 08 3月, 2011 2 次提交
-
-
由 Artem Bityutskiy 提交于
Incorporate the LEB offset information into UBIFS. We'll use this information in one of the next patches to figure out what are the max. write size offsets relative to the PEB. So this patch is just a preparation. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Incorporate maximum write size into the UBIFS description data structure. This patch just introduces new 'c->max_write_size' and 'c->max_write_shift' fields as a preparation for the following patches. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 18 1月, 2011 1 次提交
-
-
由 Artem Bityutskiy 提交于
This is a preparational patch which removes the 'c->always_chk_crc' which was set during mounting and remounting to R/W mode and introduces 'c->mounting' flag which is set when mounting. Now the 'c->always_chk_crc' flag is the same as 'c->remounting_rw && c->mounting'. This patch is a preparation for the next one which will need to know when we are mounting and remounting to R/W mode, which is exactly what 'c->always_chk_crc' effectively is, but its name does not suite the next patch. The other possibility would be to just re-name it, but then we'd end up with less logical flags coverage. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 07 1月, 2011 1 次提交
-
-
由 Nick Piggin 提交于
RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
- 29 10月, 2010 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 10月, 2010 2 次提交
-
-
由 Artem Bityutskiy 提交于
This is a bug-fix: when we unmount, and we are currently in R/O mode because of an error - we do not sync write-buffers, which means we also do not cancel write-buffer timers we may possibly have armed. This patch fixes the issue. The issue can easily be reproduced by enabling UBIFS failure debug mode (echo 4 > /sys/module/ubifs/parameters/debug_tsts) and unmounting as soon as a failure happen. At some point the system oopses because we have an armed hrtimer but UBIFS is unmounted already. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
This is a clean-up patch which: 1. Removes explicite 'hrtimer_cancel()' after 'ubifs_wbuf_sync()' in 'ubifs_remount_ro()', because the timers will be canceled by 'ubifs_wbuf_sync()', no need to cancel them for the second time. 2. Remove "if (c->jheads)" check from 'ubifs_put_super()', because at journal heads must always be allocated there, since we checked earlier that we were mounted R/W, and the olny situation when journal heads are not allocated is when mounter or re-mounted R/O. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 28 9月, 2010 1 次提交
-
-
由 Steffen Sledz 提交于
.get_sb is called on mounts with automatic fs detection too, so this function should print an error if it cannot read the superblock in debug mode only (new behaviour conforms the other fs types) Signed-off-by: NSteffen Sledz <sledz@dresearch.de> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 20 9月, 2010 1 次提交
-
-
由 Artem Bityutskiy 提交于
Commit 2fde99cb "UBIFS: mark VFS SB RO too" introduced regression. This commit made UBIFS set the 'MS_RDONLY' flag in the VFS superblock when it switches to R/O mode due to an error. This was done to make VFS show the R/O UBIFS flag in /proc/mounts. However, several places in UBIFS relied on the 'MS_RDONLY' flag and assume this flag can only change when we re-mount. For example, 'ubifs_put_super()'. This patch introduces new UBIFS flag - 'c->ro_mount' which changes only when we re-mount, and preserves the way UBIFS was originally mounted (R/W or R/O). This allows us to de-initialize UBIFS cleanly in 'ubifs_put_super()'. This patch also changes all 'ubifs_assert(!c->ro_media)' assertions to 'ubifs_assert(!c->ro_media && !c->ro_mount)', because we never should write anything if the FS was mounter R/O. All the places where we test for 'MS_RDONLY' flag in the VFS SB were changed and now we test the 'c->ro_mount' flag instead, because it preserves the original UBIFS mount type, unlike the 'MS_RDONLY' flag. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 17 9月, 2010 1 次提交
-
-
由 Artem Bityutskiy 提交于
The R/O state may have various reasons: 1. The UBI volume is R/O 2. The FS is mounted R/O 3. The FS switched to R/O mode because of an error However, in UBIFS we have only one variable which represents cases 1 and 3 - 'c->ro_media'. Indeed, we set this to 1 if we switch to R/O mode due to an error, and then we test it in many places to make sure that we stop writing as soon as the error happens. But this is very unclean. One consequence of this, for example, is that in 'ubifs_remount_fs()' we use 'c->ro_media' to check whether we are in R/O mode because on an error, and we print a message in this case. However, if we are in R/O mode because the media is R/O, our message is bogus. This patch introduces new flag - 'c->ro_error' which is set when we switch to R/O mode because of an error. It also changes all "if (c->ro_media)" checks to "if (c->ro_error)" checks, because this is what the checks actually mean. We do not need to check for 'c->ro_media' because if the UBI volume is in R/O mode, we do not allow R/W mounting, and now writes can happen. This is guaranteed by VFS. But it is good to double-check this, so this patch also adds many "ubifs_assert(!c->ro_media)" checks. In the 'ubifs_remount_fs()' function this patch makes a bit more changes - it fixes the error messages as well. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 10 8月, 2010 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 8月, 2010 1 次提交
-
-
由 Matthieu CASTET 提交于
In 'mount_ubifs()', in case of 'ubifs_leb_unmap()' falure, free allocated resources. Signed-off-by: NMatthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 12 6月, 2010 1 次提交
-
-
由 Artem Bityutskiy 提交于
The error code from 'ubifs_rcvry_gc_commit()' was ignored, so UBIFS failed to recover and continued. Instead, we should refuse mounting the file-system. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 06 3月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
This gives the filesystem more information about the writeback that is happening. Trond requested this for the NFS unstable write handling, and other filesystems might benefit from this too by beeing able to distinguish between the different callers in more detail. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 12月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Cc: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 11月, 2009 1 次提交
-
-
由 Corentin Chary 提交于
This patch makes it possible to mount UBI character device nodes, and use something like: $ mount -t ubifs /dev/ubi_volume_name /mnt/ubifs instead of the old restrictive 'nodev' semantics: $ mount -t ubifs ubi0_0 /mnt/ubifs [Comments and the patch were amended a bit by Artem] Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 16 9月, 2009 1 次提交
-
-
由 Jens Axboe 提交于
We do this automatically in get_sb_bdev() from the set_bdev_super() callback. Filesystems that have their own private backing_dev_info must assign that in ->fill_super(). Note that ->s_bdi assignment is required for proper writeback! Acked-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 11 9月, 2009 2 次提交
-
-
由 Jens Axboe 提交于
This enables us to track who does what and print info. Its main use is catching dirty inodes on the default_backing_dev_info, so we can fix that up. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
This adds two new exported functions: - writeback_inodes_sb(), which only attempts to writeback dirty inodes on this super_block, for WB_SYNC_NONE writeout. - sync_inodes_sb(), which writes out all dirty inodes on this super_block and also waits for the IO to complete. Acked-by: NJan Kara <jack@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 10 9月, 2009 1 次提交
-
-
由 Artem Bityutskiy 提交于
Add one more check to UBIFS - a check that makes sure that there are no data nodes beyond inode size. And few commantaries fixes along the line. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: NAdrian Hunter <Adrian.Hunter@nokia.com>
-
- 24 7月, 2009 2 次提交
-
-
由 Artem Bityutskiy 提交于
Nowadays VFS always synchronizes all dirty inodes and pages before calling '->sync_fs()', so remove unneeded 'generic_sync_sb_inodes()' from 'ubifs_sync_fs()'. It used to be needed, but not any longer. Pointed-out-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
The BKL was pushed down from VFS to the file-systems. It used to serialize mount/unmount/remount and prevented more than one instance of the same file-system from doing mount/umount/remount at the same time. But it is OK for UBIFS and it does not need any additional locking for these cases. Thus, kick the BKL out of UBIFS. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 05 7月, 2009 4 次提交
-
-
由 Daniel Mack 提交于
UBIFS uses a bdi device per volume, but does not care to hand out unique names to each of them. This causes an error when trying to mount more than one volumes. Append the UBI volume and device ID to avoid that. [Amended a bit by Artem Bityutskiy] Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Artem Bityutskiy <dedekind@infradead.org> Cc: Adrian Hunter <ext-adrian.hunter@nokia.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
When debugging is enabled and an unclean file-system is mounter, the following assertion is triggered: UBIFS assert failed in ubifs_tnc_start_commit at 805 (pid 1081) Call Trace: [cfaffbd0] [c0006cf8] show_stack+0x44/0x16c (unreliable) [cfaffc10] [c011b738] ubifs_tnc_start_commit+0xbb8/0xd18 [cfaffc90] [c0112670] do_commit+0x150/0xa44 [cfaffd10] [c0125234] ubifs_rcvry_gc_commit+0xd8/0x544 [cfaffd60] [c0100e9c] ubifs_fill_super+0xe78/0x15f8 [cfaffdf0] [c0102118] ubifs_get_sb+0x20c/0x320 [cfaffe70] [c007f764] vfs_kern_mount+0x58/0xe0 [cfaffe90] [c007f83c] do_kern_mount+0x40/0xf8 [cfaffeb0] [c0095c24] do_mount+0x550/0x758 [cfafff10] [c0095ebc] sys_mount+0x90/0xe0 [cfafff40] [c000ed4c] ret_from_syscall+0x0/0x3c The reason is that we initialize 'c->min_leb_idx' early, and do not re-calculate it after journal replay. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
This patch adds the following minor optimization: 1. If write-buffer does not use the timer, indicate it with the wbuf->no_timer variable, instead of using the wbuf->softlimit variable. This is better because wbuf->softlimit is of ktime_t type, and the ktime_to_ns function contains 64-bit multiplication. 2. Do not call the 'hrtimer_cancel()' function for write-buffers which do not use timers. 3. Do not cancel the timer in 'ubifs_put_super()' because the synchronization function does this. This patch also removes a confusing comment. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 16 6月, 2009 1 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-