* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: make sure the chunk allocator doesn't create zero length chunks
  Btrfs: fix data enospc check overflow

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Fix possible dq_flags corruption
  quota: Hide warnings about writes to the filesystem before quota was turned on
  ext3: symlink must be handled via filesystem specific operation
  ext2: symlink must be handled via filesystem specific operation

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: add speciffic ->setattr callback
  udf: potential integer overflow

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (36 commits)
  MIPS: Calculate proper ebase value for 64-bit kernels
  MIPS: Alchemy: DB1200: Remove custom wait implementation
  MIPS: Big Sur: Make defconfig more useful.
  MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules
  MIPS: Sibyte: Fix M3 TLB exception handler workaround.
  MIPS: BCM63xx: Fix build failure in board_bcm963xx.c
  MIPS: uasm: Add OR instruction.
  MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.
  MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.
  MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback
  MIPS: BCM63xx: Fix typo in cpu-feature-overrides file.
  MIPS: BCM63xx: Add support for second uart.
  MIPS: BCM63xx: Fix double gpio registration.
  MIPS: BCM63xx: Add DWVS0 board
  MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards.
  MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count
  MIPS: libgcc.h: Checkpatch cleanup
  MIPS: Loongson-2F: Flush the branch target history in BTB and RAS
  MIPS: Move signal trampolines off of the stack.
  MIPS: Preliminary VDSO
  ...

* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux:
  svcrdma: RDMA support not yet compatible with RPC6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix typo "numer" -> "number" in alloc.c
  nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()
  nilfs2: fix a wrong type conversion in nilfs_ioctl()

dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and
atomically for example in mark_dquot_dirty or clear_dquot_dirty.  Hence a
change done by an atomic operation can be overwritten by a change done by a
non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk.
Signed-off-by: NAndrew Perepechko <andrew.perepechko@sun.com>
Signed-off-by: NJan Kara <jack@suse.cz>

For a root filesystem write to the filesystem before quota is turned on happens
regularly and there's no way around it because of writes to syslog, /etc/mtab,
and similar. So the warning is rather pointless for ordinary users. It's
still useful during development so we just hide the warning behind
__DQUOT_PARANOIA config option.
Signed-off-by: NJan Kara <jack@suse.cz>

generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext3_setattr.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext2_setattr.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

The ebase is relative to CKSEG0 not CAC_BASE.  On a 32-bit kernel they
are the same thing, for a 64-bit kernel they are not.

It happens to kind of work on a 64-bit kernel as they both reference
the same physical memory.  However since the CPU uses the CKSEG0 base,
determining if a J instruction will reach always gives the wrong result
unless we use the same number the CPU uses.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1093/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

While playing with the out-of-tree MAE driver module, the system would
panic after a while in the db1200 custom wait code after wakeup due to
a clobbered k0 register being used as target address of a store op.

Remove the custom wait implementation and revert back to the Alchemy-
recommended implementation already set as default.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1092/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp.
35133692 (kernel.org) break non-GPL modules
that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on
MIPS.

All those functions are EXPORT_SYMBOL() so are meant to be allowed to be
used by non-GPL kernel modules.  These calls all take page protection as
an argument which is normally a constant like PAGE_KERNEL.

This commit causes all protection constants like PAGE_KERNEL to not be
constants and instead to contain the GPL-only symbol _page_cachable_default.

This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL
modules to fail to link with the complaint that they are trying to use the
GPL-only symbol _page_cachable_default...

Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for
non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc.
Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
Cc: Chris Dearman <chris@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1084/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The M3 workaround needs to cmpare the region and VPN2 fields only.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.
Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is needed for the fix of the M3 workaround.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Previously it was unconditionally used on all Sibyte family SOCs.  The
M3 bug has to be handled in the TLB exception handler which is extremly
performance sensitive, so this modification is expected to deliver around
2-3% performance improvment.  This is important as required changes to the
M3 workaround will make it more costly.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To avoid a glitch during GPIO initialisation read GPIO output register
values left by the firmware.
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/903/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr>
To: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1017/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix typo: CONFIG_BCMCPU_IS_63xx does not exist;
CONFIG_BCM63XX_CPU_63xx is the valid config option.
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/901/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The BCm63xx SOC has two uarts.  Some boards use the second one for
bluetooth.  This patch changes platform device registration code to
handle this.  Changes to the UART driver were already merged in
6a2c7eab.
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/900/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

bcm63xx_gpio_init is already called from prom_init to allow board to use
them early, so we can remove the unneeded arch_initcall.
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/899/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The DWVS0 board is a BCM6358-based board with an on-board OHCI controler.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1015/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1014/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The number of GPIOs on BCM6338 is 8, while BCM6345 has only 16 GPIOs
available.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1016/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
To: linux-kernel@vger.kernel.org
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-mips@linux-mips.org
Cc: linux-sh@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1007/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As per chapter 15 "Errata: Issue of Out-of-order in loongson"[1] to work
around the Loongson 2F erratum we need to do:

"When switching from user mode to kernel mode, you should flush the
branch target history such as BTB and RAS."

[1] Chinese version: http://www.loongson.cn/uploadfile/file/200808211
[2] English version of chapter 15:
    http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=sourceSigned-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Patchwork: http://patchwork.linux-mips.org/patch/1066/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is a follow on to the vdso patch.

Since all processes now have signal trampolines permanently mapped, we
can use those instead of putting the trampoline on the stack and
invalidating the corresponding icache across all CPUs.  We also get rid
of a bunch of ICACHE_REFILLS_WORKAROUND_WAR code.

[Ralf: GDB 7.1 which has the necessary modifications to allow backtracing
over signal frames will supposedly be released tomorrow.  The old signal
frame format obsoleted by this patch exists in two variations, for sane
processors and for those requiring ICACHE_REFILLS_WORKAROUND_WAR.  So
there was never a GDB which did support backtracing over signal frames
on all MIPS systems.  This convinved me this series should be applied and
pushed upstream as soon as possible.]
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/974/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is a preliminary patch to add a vdso to all user processes.  Still
missing are ELF headers and .eh_frame information.  But it is enough to
allow us to move signal trampolines off of the stack.  Note that emulation
of branch delay slots in the FPU emulator still requires the stack.

We allocate a single page (the vdso) and write all possible signal
trampolines into it.  The stack is moved down by one page and the vdso is
mapped into this space.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/975/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/976/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The SSB PCIcore code reused the IO resource fixup code from the original
2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack
for doing PCI IO resource configuration back then (the boot loader
doesn't configure PCI devices on this platform).

However, this code is no longer necessary since the kernel now can do
PCI resource management fine all by itself, so remove the old code.

When removing the code, it becomes obvious that the mem_offset setting
in the PCIcore driver was wrong, however this was masked by the fixup
code before, except in a few cases involving yenta_socket. For BCM47xx,
the correct offset is 0, and since this is the only device using PCIcore
in host mode, the offset can simply be removed unconditionally.
Signed-off-by: NAndreas Ferber <af@chaos-agency.de>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Cc: Markus Wigge <markus@cultcom.de>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1070/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On AR7, we already redefine PHYS_OFFSET to match the system specifities, it
is however not sufficient when unsing dma_{map,unmap}_single, specifically
in the ethernet driver, we must also adjust CAC_ADDR and UNCAC_ADDR for DMA
to work correctly. This patch fixes the following issue, seen in cpmac_open:

ops[#1]:
Cpu 0
$ 0   : 00000000 10008400 a0f5b120 00000000
$ 4   : 94c59000 94270f64 00000020 00000010
$ 8   : 00000010 94103ce0 0000000a 94c03400
$12   : ffffffff 94c03408 94c03410 00000001
$16   : a0f5ba20 00000041 94c592c0 94c59200
$20   : 94c59000 000005ee 00002000 9438c8f0
$24   : 00000010 00000000
$28   : 94fac000 94fadd58 94390000 942724a8
Hi    : 00000000
Lo    : 00000001
epc   : 94272518 cpmac_open+0x208/0x3f8
    Not tainted
ra    : 942724a8 cpmac_open+0x198/0x3f8
Status: 10008403    KERNEL EXL IE
Cause : 3080000c
BadVA : 00000000
PrId  : 00018448 (MIPS 4KEc)
Modules linked in:
Process ifconfig (pid: 278, threadinfo=94fac000, task=94e79590, tls=00000000)
Stack : 7f8da120 2ab05cb0 94c59000 943356f0 00000000 943d0000 94c59000 943356f0
        94c59030 943d0000 943c27c0 94fade10 00000000 94fade20 94c59000 9428e5a4
        00000000 94c59000 00000041 94289768 94c59000 00000041 00001002 00001043
        00000000 9428d810 00000000 94fade10 7f8da4e8 9428e6b8 00000000 7f8da4a8
        7f8da4e8 00008914 00000000 942f7f2c 00000000 00000008 00408000 00008913
        ...
Call Trace:
[<94272518>] cpmac_open+0x208/0x3f8
[<9428e5a4>] dev_open+0x164/0x264
[<9428d810>] dev_change_flags+0xd0/0x1bc
[<942f7f2c>] devinet_ioctl+0x2d8/0x908
[<942771f8>] sock_ioctl+0x29c/0x2fc
[<941a0fb4>] vfs_ioctl+0x2c/0x7c
[<941a16ec>] do_vfs_ioctl+0x5dc/0x630
[<941a1790>] sys_ioctl+0x50/0x88
[<94101e10>] stack_done+0x20/0x3c
Signed-off-by: Npeter fuerst <post@pfrst.de>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1050/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Seems I trimmed one too many lines in
29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp
7084338e (kernel.org) which led to no
functioning Ethernet on my WAG54Gv2.  This patch restores the AWOL line.
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1065/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3
(lmo) rsp.  8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7
to no longer get as far as init.  Fixed my phat fingering.
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1064/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes a kernel warning when loading the the loongson2_clock
driver:

"Feb 25 23:42:27 localhost kernel: [    4.965000] loongson2_clock: module
license 'unspecified' taints kernel."
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Reported-by: NLiu Shiwei <liushiwei@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1045/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On Lemote 2F CS5536 MSRs are accessed through a index / data register pair.
The access sequence must be protected by a spinlock to be atomic.

Without this rebooting in fs2f_reboot() may fail.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1058/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1008/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

kernel/elfcore.c includes <linux/elf.h> which includes the <asm/elf.h>.  In
<asm/elf.h>, struct pt_regs is declared inside the parameter list of the
elf_dump_regs function which causes a kernel build warning.

Fixed by adding a forward declaration of struct pt_regs.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

octeon_reserve32_memory is defined In Octeon's setup.c, so remove the
redundant extern declaration of this variable.
Signed-off-by: NYang Shi <yang.shi@windriver.com>
To: f.fainelli@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1022/Acked-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>