Output all VM mappings a command submission uses.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it much easier to find when userspace misses to send some buffers.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Port of radeon commit 9b7d786b.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This was added to two radeon files even though they don't use any
vga_switcheroo symbols, the amdgpu fork inherited them:

Added to amdgpu_acpi.c by commit d7a2952f ("drm/radeon: Add
support for the ATIF ACPI method to the radeon driver").

Added to amdgpu_bios.c by commit 6a9ee8af ("vga_switcheroo:
initial implementation (v15)").
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was added to three files even though they don't use any
vga_switcheroo symbols:

Added to radeon_acpi.c by commit d7a2952f ("drm/radeon: Add
support for the ATIF ACPI method to the radeon driver").

Added to radeon_asic.c by commit 0a10c851 ("drm/radeon: create
radeon_asic.c").

Added to radeon_bios.c by commit 6a9ee8af ("vga_switcheroo:
initial implementation (v15)").
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check to make sure we aren't touching a non-existent
display controller and simplify the code.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rework the sdma structures in the driver to
consolidate all of the sdma info into a single
structure and allow for asics that may have
different numbers of sdma instances.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Everything is evicted from VRAM before suspend, so we need to make
sure all BOs are unpinned and re-pinned after resume. Fixes broken
mouse cursor after resume introduced by commit b9729b17.

Port of radeon commit:
f3cbb17bReviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Port of radeon commit:
8991668aReviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in dce8 crtc_cursor_set2, and use
amdgpu_crtc->cursor_addr in dce8 set_cursor.

This fixes dce8 cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.

Port of radeon commit:
cd404af0Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's only needed in dce8 crtc_cursor_set2.

Port of radeon commit:
2e007e61Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Setting a mode seems to clear the cursor registers, so we need to
re-program them to make sure the cursor is visible.

Port of radeon commit:
6d3759fa

v2: change radeon reference in error message
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The cursor_set2 hook provides the cursor hotspot position within the
cursor image. When the hotspot position changes, we can adjust the cursor
position such that the hotspot doesn't move on the screen. This prevents
the cursor from appearing to intermittently jump around on the screen
when the position of the hotspot within the cursor image changes.

Port of radeon commits:
78b1a601
3feba08dReviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Port of radeon commit:
8991668aReviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in dce11 crtc_cursor_set2, and use
amdgpu_crtc->cursor_addr in dce11 set_cursor.

This fixes dce11 cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.

Port of radeon commit:
cd404af0Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's only needed in dce11 crtc_cursor_set2.

Port of radeon commit:
2e007e61Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Setting a mode seems to clear the cursor registers, so we need to
re-program them to make sure the cursor is visible.

Port of radeon commit:
6d3759fa

v2: change radeon reference in error output
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The cursor_set2 hook provides the cursor hotspot position within the
cursor image. When the hotspot position changes, we can adjust the cursor
position such that the hotspot doesn't move on the screen. This prevents
the cursor from appearing to intermittently jump around on the screen
when the position of the hotspot within the cursor image changes.

Port of radeon commits:
78b1a601
3feba08dReviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Port of radeon commit:
8991668aReviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in dce10 crtc_cursor_set2, and use
amdgpu_crtc->cursor_addr in dce10 set_cursor.

This fixes dce10 cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.

Port of radeon commit:
cd404af0Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's only needed in dce10 crtc_cursor_set2.

Port of radeon commit:
2e007e61Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Setting a mode seems to clear the cursor registers, so we need to
re-program them to make sure the cursor is visible.

Port of radeon commit:
6d3759fa

v2: change radeon reference in error message
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The cursor_set2 hook provides the cursor hotspot position within the
cursor image. When the hotspot position changes, we can adjust the cursor
position such that the hotspot doesn't move on the screen. This prevents
the cursor from appearing to intermittently jump around on the screen
when the position of the hotspot within the cursor image changes.

Port of radeon commits:
78b1a601
3feba08dReviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Better precision than the regular div opcode.

v2: drop 64 bit divide
v3: fix op handling.  This actually is a 64 bit divide.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Better precision than the regular mul opcode.

v2: handle big endian properly.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just skips a data section.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Basically a nop.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are buggy on some asics and not really used anymore
now that the GPU schedular is enabled.

Change-Id: I67182b409d64de308392a15d1a0a15018071dc0b
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Change-Id: Idce64f63e8422324996fc5d583d0bc9a5ac60d0c
Signed-off-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

need to decrease visible vram usage by default.
Signed-off-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: Nmonk.liu <monk.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Calculate the driver state in sw_init and program the
registers in hw init.
Acked-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There doesn't seem to be any need to have 'ib' volatile, the code is
not even consistent with it and some places already miss it. As it is
now it's just making gcc produce worse code. If there are special
requirements for that memory, then proper primitives like memory
barriers or accessor functions should be used, but it doesn't look
like that is needed here.
While at it, change the type to match the one in radeon_ib structure.
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After this patch the register check loop does the same thing as before,
except that now gcc does better job optimizing it: it now sees that
end_reg was already checked against PACKET3_SET_CONTEXT_REG_END and can
optimize REG_SAFE_BM_SIZE comparison out of evergreen_is_safe_reg()
as (PACKET3_SET_CONTEXT_REG_END >> 7) < REG_SAFE_BM_SIZE.
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

evergreen_cs_check_reg() is a large function and gcc doesn't want to
inline it. It has a quick check for reg_safe_bm[] to see if register
needs special handling, which often results in early exit. However
because the function is large, it has a long prologue/epilogue to
save/restore all the callee-save registers which according to perf is
taking significant amount of time. To avoid this, we can reuse
evergreen_is_safe_reg() to do the early check directly in register loop.
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To avoid having to distinguish between CAYMAN or older on every register
check, place a pointer in evergreen_cs_track and use it unconditionally.
Also make use of the fact that both reg_safe_bm[] arrays are of the same
length to remove another CAYMAN check.
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently everyone and their dog has their own favourite spelling
for vga_switcheroo. This makes it hard to grep dmesg for log entries
relating to vga_switcheroo. It also makes it hard to find related
source files in the tree.

vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently everyone and their dog has their own favourite spelling
for vga_switcheroo. This makes it hard to grep dmesg for log entries
relating to vga_switcheroo. It also makes it hard to find related
source files in the tree.

vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>