Fix the above kernel error from parport_announce_port() on 32bit GSC
machines (e.g. B160L). The parport driver requires now a pointer to the
device struct.
Signed-off-by: NHelge Deller <deller@gmx.de>

If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for
various super-io chips by accessing i/o ports in a range which will
crash any parisc hardware at once.

In addition, parisc has it's own incompatible superio chip
(CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for
parisc we can avoid that people by accident enable the parport_pc
superio option too.
Signed-off-by: NHelge Deller <deller@gmx.de>

commit dc7dce28
Author: Bjorn Helgaas <bhelgaas@google.com>
Date:   Fri Oct 28 16:27:27 2011 -0600
   parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus
                    resources

  Supply root bus resources to pci_create_root_bus() so they're correct
  immediately.  This fixes the problem of "early" and "header" quirks seeing
  incorrect root bus resources.

added tests for elmmio_space.start while it should use
elmmio_space.flags.  This for example led to incorrect resource
assignments and a non-working stifb framebuffer on most parisc machines.

LBA 10:1: PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [io  0x12000-0x13fff] (bus address [0x2000-0x3fff])
pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff])
pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff])
pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0]
Signed-off-by: NHelge Deller <deller@gmx.de>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>

The non-PAT resource probing code failed to set the type of the LBA bus_num
resource (30aa80da "parisc/PCI: register busn_res for root buses" did
the corresponding thing for the PAT case).

This causes incorrect resource assignments and a non-working stifb
framebuffer on most parisc machines.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NHelge Deller <deller@gmx.de>

worse, we lock ->resource_lock too late when we are destroying the
final clonal VMA; the check for lack of other mappings of the same
opened file can race with mmap().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When removing atmel_lcdfb module, the backlight is unregistered but not
blanked. (only for CONFIG_BACKLIGHT_ATMEL_LCDC case).
This can result in the screen going full white depending on how the PWM
is wired.
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

When a too small framebuffer is given, the atmel_lcdfb_check_var
silently fails.
Adding an error message will save some head scratching.
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

That patch failed to set proc_scsi_fops' .release method.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

With the introduction of target_get_sess_cmd() referencing counting for
ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage
in traditional iscsi-target driver code now needs to be aware of the
active I/O shutdown case when a remaining se_cmd->cmd_kref reference may
exist after transport_generic_free_cmd() completes, requiring a final
target_put_sess_cmd() to release iscsi_cmd descriptor memory.

This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before
transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids
aquiring the per-connection queue locks for typical fast-path calls
during normal ISTATE_REMOVE operation.

Also update iscsit_free_cmd() usage throughout iscsi-target to
use the new 'bool shutdown' parameter.

This patch fixes a regression bug introduced during v3.10-rc1 in
commit 3e1c81a9, that was causing the following WARNING to appear:

[  257.235153] ------------[ cut here]------------
[  257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86()
[  257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop
	tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file
	target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp
	libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf
	kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801
	microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy
	async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon
	i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd
	mlx4_core scsi_transport_fc scsi_tgt pps_core
[  257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103
[  257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011
[  257.327597]  ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98
[  257.335892]  ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000
[  257.344191]  ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8
[  257.352488] Call Trace:
[  257.355223]  [<ffffffff8138eef2>] dump_stack+0x19/0x1f
[  257.360963]  [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b
[  257.367669]  [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17
[  257.374181]  [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86
[  257.380697]  [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12
[  257.387311]  [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod]
[  257.396438]  [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod]
[  257.404893]  [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod]
[  257.412964]  [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod]
[  257.421712]  [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod]
[  257.430071]  [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod]
[  257.438625]  [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod]
[  257.446985]  [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod]
[  257.456121]  [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod]
[  257.465159]  [<ffffffff81050537>] ? __migrate_task+0x110/0x110
[  257.471674]  [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod]
[  257.479741]  [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod]
[  257.488683]  [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod]
[  257.497623]  [<ffffffff81047486>] ? wake_up_bit+0x25/0x25
[  257.503652]  [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod]
[  257.512882]  [<ffffffff81046f89>] kthread+0xb0/0xb8
[  257.518329]  [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60
[  257.526105]  [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0
[  257.532133]  [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60
[  257.539906] ---[ end trace 5520397d0f2e0800 ]---
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Go ahead and propigate up the ->cmd_kref put return value from
target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd()
-> transport_generic_free_cmd().

This is useful for certain fabrics when determining the active I/O
shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd()
is still required by the caller.
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Just the usual printk related warnings.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix the following sparse warnings:

drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static?
drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static?
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed $SUBJECT line]

If a key was larger than 64 bytes, as checked by iscsi_check_key(), the
error response packet, generated by iscsi_add_notunderstood_response(),
would still attempt to copy the entire key into the packet, overflowing
the structure on the heap.

Remote preauthentication kernel memory corruption was possible if a
target was configured and listening on the network.

CVE-2013-2850
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a bug where FILEIO was incorrectly reporting the number
of logical blocks (+ 1) when using non struct block_device export mode.

It changes fd_get_blocks() to follow all other backend ->get_blocks() cases,
and reduces the calculated dev_size by one dev->dev_attrib.block_size
number of bytes, and also fixes initial fd_block_size assignment at
fd_configure_device() time introduced in commit 0fd97ccf.
Reported-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Reported-by: NBadari Pulavarty <pbadari@us.ibm.com>
Tested-by: NBadari Pulavarty <pbadari@us.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The following warning was seen on 3.9 when a corrected PCIe error was being
handled by the AER subsystem.

WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90()

This occurred because a call to pci_get_domain_bus_and_slot() was added to
cper_print_pcie() to setup for the call to cper_print_aer().  The warning
showed up because cper_print_pcie() is called in an interrupt context and
pci_get* functions are not supposed to be called in that context.

The solution is to move the cper_print_aer() call out of the interrupt
context and into aer_recover_work_func() to avoid any warnings when calling
pci_get* functions.
Signed-off-by: NLance Ortiz <lance.ortiz@hp.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Given that srpt_release_channel_work() calls target_wait_for_sess_cmds()
to allow outstanding se_cmd_t->cmd_kref a change to complete, the call
to perform target_sess_cmd_list_set_waiting() needs to happen in
srpt_shutdown_session()

Also, this patch adds an explicit call to srpt_shutdown_session() within
srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be
called in the cases where TFO->shutdown_session() is not triggered
directly by TCM.

Cc: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Switch back to pre commit 1c7b13fe list splicing logic for active I/O
shutdown with tcm_qla2xxx + ib_srpt fabrics.

The original commit was done under the incorrect assumption that it's safe to
walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after
sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting()
during session shutdown.

So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list
during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to
allow wait_for_completion() + TFO->release_cmd() to occur without having to
walk ->sess_cmd_list after the list_splice.

Also add a check to exit if target_sess_cmd_list_set_waiting() has already
been called, and add a WARN_ON to check for any fabric bug where new se_cmds
are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already
been set.

Cc: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

With the addition of a DVO clock, a bug is now evident in the vt8500
clock code:
[    0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c()
[    0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int

This is caused by an unbalanced spinlock in vt8500_dclk_set_rate().
Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore().
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

clock-frequency property from platform data was read but never used.
Apply defined rate when clock is registered.
Signed-off-by: NMarek Belisko <marek.belisko@streamunlimited.com>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: add missing changelog]
Cc: stable@kernel.org
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Rate was incorrectly computed because we read from wrong divider register.
Signed-off-by: NMarek Belisko <marek.belisko@streamunlimited.com>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org

Apparently we should not free page that has not been allocated.
This is b/c alloc_xenballooned_pages will take care of freeing
the page on its own.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Currently no driver *) handles the sysreg clock, with an assumption
that this clock is always left in its default state (enabled).

Before commit 6e6aac75
ARM: EXYNOS: Migrate clock support to common clock framework

the sysreg clock was not even defined and hence wasn't handled
explicitly in the kernel.

To restore the previous behaviour disable masking the sysreg clock
off in the clock core by default.

*) Except the Exynos4x12 FIMC-IS driver, which will be modified
   to not touch the sysreg clock.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Fix clk_reg_sysctrl() to set main clock registers of new struct
clk_sysctrl even if the registered clock has no parents.

This fixes an issue where "ulpclk" was registered with all clk->reg_*
fields uninitialized, causing a -EINVAL error from clk_prepare().
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

First Ethernet device has a ".0" appended onto the device name. It
appears that we need this in order to obtain the correct clock.

Without this fix Ethernet does not function on Ux500 devices, which is a
regression.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improved changelog]

radeon currently uses a drm function to get the speed capabilities for
the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard
method of performing this detection and this patch changes it to use
the max_bus_speed attribute.

From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This narrows the scope of the apple re-POST hack added in:
drm/radeon: re-POST the asic on Apple hardware when booted via EFI

That patch prevents UVD from working on macs when booted in EFI
mode.  The original patch fixed macbook2,1 systems which were
r5xx and hence have no UVD.  Limit the hack to those systems to
prevent UVD breakage on newer systems.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=63935

Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NMatthew Garrett <matthew.garrett@nebula.com>

Skip checking crtcs in hardware without them.  Avoids checking
non-existent hardware.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics have variable numbers of crtcs.  Use that
rather than the asic family to determine which crtcs
to check.  This avoids checking non-existent crtcs or
missing crtcs on certain asics.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Should be 5 rather than 2.

Noticed by sroland and glisse on IRC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The chip id for SUMO2 isn't used.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=63935Tested-By: NDave Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Save the xenstore local status computed in xenbus_init. It can then be used
later to check if xenstored is running in this domain.
Signed-off-by: NAurelien Chartier <aurelien.chartier@citrix.com>
[Changes in v4:
- Change variable name to xen_store_domain_type]
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If the xenbus frontend is located in a domain running xenstored, the device
resume is hanging because it is happening before the process resume. This
patch adds extra logic to the resume code to check if we are the domain
running xenstored and delay the resume if needed.
Signed-off-by: NAurelien Chartier <aurelien.chartier@citrix.com>
[Changes in v2:
- Instead of bypassing the resume, process it in a workqueue]
[Changes in v3:
- Add a struct work in xenbus_device to avoid dynamic allocation
- Several small code fixes]
[Changes in v4:
- Use a dedicated workqueue]
[Changes in v5:
- Move create_workqueue error handling to xenbus_frontend_dev_resume]
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In the (not so useful) kernel configuration where CONFIG_SWAP
is undefined and CONFIG_XEN_SELFBALLOONING is defined,
xen_tmem_init would use undefined variable 'static bool frontswap'.

Added #else to have #define frontswap (0) in the case where
CONFIG_FRONTSWAP is not defined.
Signed-off-by: NFrederico Cadete <frederico@cadete.eu>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The pinconf_dgb_config_print() takes the per-pincontroller
mutex, when what it wants to take is actually the pin maps
mutex.
Reported-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Fix to return a negative error code from the devm_clk_get() error
handling case instead of 0, as done elsewhere in this function.

Introduced by commit 950707c0
(pinctrl: sunxi: add clock support)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Some GPIO EINT control registers needs to be preserved across
suspend/resume cycle. This patch extends the driver to take care of
this.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch extends pin bank descriptor structure with SoC-specific
private data field that allows SoC-specific drivers to store their own
private data.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

SoC-specific driver might require additional save and restore of
registers. This patch adds pair of SoC-specific callbacks per pinctrl
device to account for this.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>